Upgraded Win2000 to SP4: Now cannot run in 9i Forms Builder

I upgraded to SP4 for Win2000 professional. Now when I attempt to run a form through 9i Forms Builder I get "FRM-92160: Web client version too old".
Do I need a new OC4J? If so, where is is within OTN?
Thanks

Sounds like maybe you need to clear out the cache for jinitiator or you are pointing to an different version of the JAR file. Did you apply a Forms patch as well?
I would suggest getting on metalink.oracle.com since there are a few notes which talk you through this.
Hope this helps.
regards
Grant Ronald
Forms Product management

Similar Messages

Upgraded to Maverick. Now cannot connect to wifi. All my other devices will connect. Have rest wireless hot spot switch and cable modem. Other devices still connect but MacPro does not. MacPro wireless is self assigning an IP address blocking access.

Upgraded to Maverick. Now cannot connect to wifi. All my other devices will connect. Have rest wireless hot spot switch and cable modem. Other devices still connect but MacPro does not. MacPro wireless is self assigning an IP address blocking access. It will connect if I connect to my iPhone hot spot via wifi. Any ideas?

If you follow this video you'll see how to delete your WiFi AP from the OS, this will allow you to select it again which I feel will correct your problem.
https://app.box.com/s/fe7v7h7kywjr23spumqp

Upgraded to LION, and now cannot download new podcasts as usual Now what?

I upgraded to LION, and now cannot download new podcasts as usual Now what?

Mac OS X v10.7 Lion Communities
Why didn't you make a backup and just restore for now?
RoaringApps Mac OS X Lion Application Compatibility
The whole PowerPC has been discussed since before Lion came out last June.
MacBook Pro

Firefox 12 cannot runs my oracle forms..

sir
firefox 12 cannot runs my oracle forms..
i am using oracle 10g and jre 6 instead of jiniator 1.13
how can run oracle forms 10g with with firefox or google chroome plz solve this with detail...

You are asking this question quite often...Why not just follow up one of your threads as they obviously are about running forms with firefox?
Anyway; to sum it all up, in order to get firefox running you need to configure the sun java plugin which you already did: http://www.oracle.com/technetwork/developer-tools/forms/documentation/forms-jre-131772.pdf
Then you need to set the jpi_mimetype in your formsweb.cfg accordingly to the version of the jpi you installed. If you want to start forms with any java plugin just change it to
jpi_mimetype=application/x-java-appletcheers

Run report thru form builder

hi
I have a table
EMP(empname varchar2(30),
empno varchar2(20),
add1 varchar2(60),
add2 varchar2(60),
sal number(10,2),
comm number(10,2)
i want create a report and
parameter form and run it thru form builder
can it possible i select column name in parameter as a list and report
show data only these column
if any solution plz help me
with thanx

I think you can achieve this as follows:
set up a new parameter, say P_FIELD, with initial value of empname
in your data model have an sql something like
Select
P_FIELD as field1 from EMP
pass the column name to P_FIELD and the report will return that column

Upgraded to iOS5 and now cannot connect to iTunes Store

After upgrading to iOS 5, I cannot connect to the iTunes Store. I was having the problem at home where I was connected to my home network, and now when I'm not connected to a network.
Suggestions?

This appears to be an Apple ID issue. I was forced to change my username to my email (which I had already done years ago) after searching and searching for reasons why my password all of the sudden didn't work on my iPhone. This started about 3-4 weeks ago.
So my password needed to be re-set when I tried to access my iTunes on my computer, and my iTunes balance disappeared. My username was still my email address (as it had been for years) but my gift card balance was gone and so was ownership of all my apps and music
Now, after upgrading to iOS5 my ONLY Apple ID now works with the re-set password, but it lost all of my apps. They are there, but when I go to update them through the iTunes store, I get that "cannot connect to itunes store" error message because after that weird 'update' to my Apple ID it seems to have lost all history I've had with Apple.
This is so upsetting, as I'm finding out that Apple does not allow recovery of these purchased items between these ID's. So, now I'm wondering where in the heck is my "old" apple id?? I can't sign in with my "old" info....
Lame.

HP Split X2 upgraded from Windows 8 pre-loaded to Win 8.1, now cannot run Add feature to Windows 8.1

Hi!
i have purchased a HP Split X2 13.3" laptop in a computer show slightly more than 1 year ago.
it comes with Windows 8 pre-loaded at that time.
Later on, Microsoft offer free upgrade for all Win 8 to Win 8.1 and i did that as well.
Everything goes perfectly smooth unless recently when i try to go Control Panel run Add Feature to Windows 8.1,
it ask me for product key!!
When i looked the bottom of my Split X2 laptop, it does not have the sticker of the Windows product key. There is only 1 Windows 8 hologen sticker! Hence, i use some key finder application to detect the product key.
I enter the product key when i run Add Feature to Win 8.1 again, but the Windows prompted me key is not valid.
Why?
The Win8.1 insalled is genuine version. I can perform regular Windows updates without issue.
Appreciate if any expert can help to resolve my issue.
Thanks a lot,
Nkboy
This question was solved.
View Solution.

Hi
The Add Feature is to upgrade your current Windows 8/8.1 Core Edition to Windows 8/8.1 Pro or Windows 8/8.1 Media Center Edition.
It requires you to purchase particular Product key with regard to Add Features option.
Here are some links to help you understand it:
http://windows.microsoft.com/en-us/windows-8/add-features-frequently-asked-questions
http://www.eightforums.com/tutorials/6673-add-features-windows-8-a.html
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

OSX 10.4.2 tried to update itunes now cannot run program

I know it's an old computer (iBook, 2003)--but it has to hang in there for a few more months! Tried to update the iTunes, for the sole purpose of using the ipod, and it let me--but now a message states it can't run the program at all. Tried CDs--opens Quicktime. Cannot update QT b/c computer's too old and slow. I would love to update it to something before 7.3...ideas?
Mac Mac OS X (10.4.2)

It's an upgrade as it is! Recently the hard-drive crashed and I upgraded to the current OSX 10.4.2. I don't have enough memory to go any higher. I'm looking for a new Mac--but my paychecks can't handle that yet.
Mac Mac OS X (10.4.2) iBook

Upgraded to Mountain Lion - now cannot write to ext. HD

I have a strange issue. Having recently upgraded from Snow Leopard to Mountain Lion - I was first presented with an NTFS issue whereby my system would not mount or recognize any hard drive formatted NTFS. After some extensive research online, it was discovered that there was a conflict with two third party utilities / preference panes, namely, NTFS-3G, and Mac Fuse. I have deleted those two preferences and all associated files - they have been completely removed and uninstalled from my system. I now am able to mount and read NTFS drives, however, the one drive where I have been keeping all my movies / TV content, can now only be READ. In other words, I cannot copy files to it, nor can I create folders, etc. What happened that I can no longer write to this particular drive? I had no problems while I had Snow Leopard on my system, but now that I have upgraded to Mountain Lion....something happened, and I want to fix it. Please help if you have anything useful for me.

http://fpdownload.macromedia.com/get/flashplayer/pdc/11.3.300.271/install_flash_ player_osx.dmg

HELP!! Upgraded to latest Itunes, now cannot import CDs!!!

Was doing fine, enjoying my new Ipod, building music library for first time. Then I upgraded and now I can no longer import music.
I ran diagnostics as suggested in other thread on problems burning CD, which shows that the computer is not recognizing my CD drive anymore. And in My Computer...it does not show that there is an audio cd in the drive.
What is going on that Itunes is causing the computer not to recognize the drive? I read that there is a work around for the immediate problem of beginning the import in windows media player---but is there a way of backing out of this version of Itunes that is clearly problematic? I really regret upgrading.
Itunes diagnostic is below which shows drive is "empty" when there is a CD in it.
Microsoft Windows XP Home Edition Service Pack 1 (Build 2600)
TOSHIBA Satellite A45
iTunes 7.0.1.8
CD Driver 2.0.6.0
CD Driver DLL 2.0.6.0
LowerFilters: PxHelp20 (2.0.0.0), AFS2K (3.1.14.0), BSSTOR (1.0.7.0), PFC (2.5.0.201),
UpperFilters: GEARAspiWDM (2.0.6.0),
Video Driver: Intel(R) 82852/82855 GM/GME Graphics Controller\Intel(R) 82852/82855 GM/GME Graphics Controller
IDE\DiskIC25N060ATMR04-0______________________MO3OAD4A, Bus Type ATA, Bus Address [0,0]
IDE\CdRomTOSHIBADVD-ROM_SD-R2412________________1431___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
D: TOSHIBA DVD-ROM SD-R2412, Rev 1431
Drive is empty.

"+itunes frequently renders CD/DVD burners useless...+"
"Frequently"?! Do you know why (and what can be done about it)?
I'd love to have itunes on my PC and throw 'em $$ for downloads, but I haven't had any luck so far. And, frankly, I'd rather have my drive and burner working and be itunes-less than the other way around...
EDIT: I asked in an already existing thread with no luck:
http://discussions.apple.com/thread.jspa?threadID=1800058&tstart=90
Message was edited by: JimPV

I just upgraded to Lion and now cannot add attachments to my emails in Safari or use the search window. What gives?

I had been holding off upgrading to Lion because of the bad press, but discovered that I could no longer receive email on my Mac because my iPhone had been moved to iClound by an Apple tech when it had to be replaced, and my Snow Leopard version wouldn't support iCloud. So I upgraded to Lion and immediately began having trouble. First I was told that several of my software applications were incompatible and had been removed. Then I discovered that Safari (apparently the latest version 5.1.3) had lost functionality. I can't attach anything to my emails and the search window is grayed out and inoperable. Is there a fix or do I need to retreat to Snow Leopard? Bob Kellam

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
As Guest, test. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on some Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.) Post the results of steps 1 and 2.

Upgraded to 3.5 now LR runs very very slow??

Is this just happening to me? It takes forever to get anything done. Actually my whole system seems to run slow
when LR is running now. Never had a problem before. Can I go back to the last version please?

mkonvo wrote:
Is this just happening to me? It takes forever to get anything done. Actually my whole system seems to run slow
when LR is running now. Never had a problem before. Can I go back to the last version please?
Mac, Windows? Did you try the 3.5RC and was it O.K.? I have the 3.5RC on two different Macs as was very happy. I did not update to the 3.5 final yet. You can get the prior version on the Adobe site.
Jay S.

I recently upgraded to iphoto11 and now cannot open my iphoto. I get a messageto first prepare iphoto with library upgrader. downloaded upgrader, but nothing changes. I don't know what to do

I recently successfully upgraded my mid-2007 mac desktop to OS X 10.9 I tried to purchase a print from my iphoto and it told me that I could not do this unless I upgraded to Iphoto version 9.5 which I then did. When I attempted to open my iphoto library following the upgrade, I got the message "To open library with this version of Iphoto, it firsts needs to prepare" I was then prompted to use the Iphoto library upgrader. I downloaded the upgrader as it suggested. However, nothing different happens. I still get the same prompt each time I attempt to open the iphoto (telling me the I need to prepare with the library upgrader.) I have no idea what to do next. I am not finding any help in my online searches. Can someone please offer suggestions? Keep in mind that I am not a computer expert, so simple terms/instructions would be most helpful. Thank you!

Yes, I purchased the upgrade through the apple website, downloaded successfully. When I clicked on the iphoto icon, that's when I got the prompt that said I needed to prepare my library using the library upgrader. I got this from apple website as well. It downloaded, then appeared on my desktop screen as a 'library upgrader' I don't know what to do next? When I click it, it just keeps repeating the download process.

Friend installed lightroom cc and now cannot run Fishsim 2 (for general use and competitions)as it comes up with faulty picture files any work around to stop lightroom doing this He needs lightroom for his photo work and cannot uninstall it

Can anyone solve this problem as this is a world wide community (Fishsim) and its a shame that this person cannot fish our competitions

Hi Thanks for your reply
he did reinstall other program with no results
I do know that sometimes installing 1 program does interfere with
other programs and just because lightroom has not done it before
does not mean it wont do it.
The main problem is that fishsim has faulty jpeg files in it only
since LR installed and it wont load.
Thank you for your advice and help
David Turner

Upgraded to IOS 7, now cannot hear callers and they cannot hear me.

Speaker and mic works perfect for music, voice notes, voice mail... everything but making phone calls

Have you reset since the upgrade? Hold down the home button along with the power button until you see the Apple, then let go.

Upgraded Win2000 to SP4: Now cannot run in 9i Forms Builder

Similar Messages

Maybe you are looking for