Upgrading 1.8 MHz Power Mac G5 (memory and OS)

I recently purchased an iMac loaded with Leopard. I would like to use the install disk to upgrade my older Power Mac G5. My machine is running 10.3.9 currently.
I know I need to increase memory, but by how much? A salesman sold me additional memory some time ago, but it caused a lot of problems and I removed it. Now I'm leery of what to buy. Will the following memory description be appropriate, both in type and quantity to run Leopard?
1GB PC3200 DDR 400MHz Module For PowerMac G5 Models(requires pairs!), iMac G5, Mac mini 1.25GHz/1.42GHz Models. TRUE PC3200 CAS 3.0(or Faster) Non-Stacked 64x8 device Low-Noise PCB Solution! New, Lifetime Advance Replacement Warranty. (OWC3200DDR1024)
My Power Mac's memory currently consists of 2-128MB DDR SDRAM PC3200U-30330.
I'm application-oriented and not too technically savvy.

The G5s came stock with 256MB 6 yrs ago but even then it was sub-standard amount and 1.2 - 1.5GB RAM was much better for even basic light use.
2GB should be a good improvement, you have 4 DIMM slots likely. But it depends on what you plan to do or use it for. Buy from vendors that sell and cater to Mac hardware.
OEM DVDs like from an iMac can't be used, they don't load sometimes, and you really do need retail discs. Good luck finding 10.5.x DVD retail.
New drives can also do a lot to improve performance.
Realize though, other than running older PowerPC applications, the iMac should be able to do most things very well.

Similar Messages

I have a 2.4GHz DP Power Mac G5(ppc) and want to know if buying a new graphics card

I need an editing computer and don't have the money to buy a new $1500 or so system. I have a 2.4GHz DP Power Mac G5 (ppc) and want to know if it would be worth buying a new graphics card and more RAM. I'm looking at around a $300 or so upgrade. I am saving for a new computer but need a computer to edit videos for a job I have NOW. I am currently editing on a intel core duo laptop with 6 G of RAM, the computer is taking a real beating and would also like to know if the upgrade would make the G5 run faster than the laptop I am using now.

Hello,
It won't make the G5 run much faster, but we need more info please.
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware>Graphics/Displays and report like this...
NVIDIA GeForce 7800GT:
Chipset Model:    GeForce 7800GT
Type:    Display
Bus:    PCI
Slot:    SLOT-1
VRAM (Total):    256 MB
Vendor:    nVIDIA (0x10de)
Device ID:    0x0092
Revision ID:    0x00a1
ROM Revision:    2152.2
Displays:
VGA Display:
Resolution:    1920 x 1080 @ 60 Hz
Depth:    32-bit Color
Core Image:    Supported
Main Display:    Yes
Mirror:    Off
Online:    Yes
Quartz Extreme:    Supported
Display:
Status:    No display connected
And which exact G5 please.
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1
Also, Graphics cards are slim pickings for G5s.

Hi, I would like to buy a power mac G4 quicksilver and install the latest hardware i.e. i5, SSD etc., is this possible?

Hi, I would like to buy a power mac G4 quicksilver and install the latest hardware i.e. i5, SSD etc., is this possible?

Intel i5 processor upgrade? No way, no how with the OEM PPC board.
The "Latest" hardware that can be used with the original G4 motherboard is imited to used 7445/7447/7448 3rd party processor upgrades (all obsolete), PCI expansion, AGP graphics (only used as all are obsolete), new IDE drives (capacity support dependant on model year) and PC133 memory.
SATA and SSD can be used, but only with PCI SATA controllers or the specially configured IDE modded SSD from OWC.
PCI controllers will get you about SATA 1 data rates. The adapted SSD on IDE won't get beyond 60 MB/s.
You could use the case and put a mini ITX or micro ATX board in to support the i5. Of course you could then run Windows 7. If you want to run OS X, discussion ends here and begins your use of Google and searching for "x86" and "Hackintosh".

Hi, I have a refurbished upgraded macbook with 320 GB Disk, 4GB Memory and running Lion OS v 10.7.5. This satisfies the second part of the requirement for installing OS X Mavericks (10.9) but happens to be an early 2008 piece. Can I somehow install 10.9

Hi, I have a refurbished upgraded macbook with 320 GB Disk, 4GB Memory and running Lion OS v 10.7.5. This satisfies the second part of the requirement for installing OS X Mavericks (10.9) but happens to be an early 2008 piece. Can I somehow install 10.9? And why is apple not allowing people like me to try out this installation? Any reason that are too technical that people like me cannot upgrade and handle?
This would solve many apps to run on this.

It's mainly the video card. The Models 2,1 through 4,1 have video cards with non-upgradeable 32bit drivers. The model 5,1 Late 2008 and newer have at least the NVIDIA GeForce 9400M with 64bit drivers. Mountain Lion and Mavericks require 64bit native drivers. Mountain Lion and Mavericks no longer support Intel's GMA 950 or GMA X3100 graphics processors.
While Lion used some 32 bit and a lot of 64 bit code, Mountain Lion and Mavericks are pure 64 bit, which excludes more systems than Lion did. It's not something you can add memory to, for example, as it involves the base architecture.
http://reviews.cnet.com/8301-13727_7-57470261-263/older-64-bit-macs-out-of-the-p icture-for-mountain-lion/?tag=mncol;txt
http://reviews.cnet.com/8301-13727_7-57387846-263/will-your-mac-run-mountain-lio n/

I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card

I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card. The serial number on my computer is: RM620603R6W. Apple won't help me because the computer is older than suggested. Please give me the exact video card that will work best for my computer.

Hi Mike, make sure the card has Mac ROM, or is a PC card with Mac ROMs flashed to it...
G5 PCIe options are listed here:
http://www.jcsenterprises.com/Japamacs_Page/Blog/71BBF3EF-9713-4C53-8B80-26771F8 A4087.html

I have a Power Mac G4 (2004) and want to transfer all my files to a new MacBook Pro 15.4". Can this be done thru firewire cable or do I have to transfer to an external Firewire 800 hard drive first?

I have a Power Mac G4 (2004) and want to transfer all my files to a new MacBook Pro 15.4". Can this be done thru firewire cable or do I have to transfer to an external Firewire 800 hard drive first?

Do it with a Firewire cable (buy a 800/400 adapter if you need it) - the USB transfer takes a much longer time.
Start up your old PowerMac G4 holding down the "T" key, for target disk mode.
On your new MacBook Pro open "Migration Assistant" in your utilities folder.
Connect the 2 computers by firewire cable and follow the prompts in Migration Assistant.

I upgraded to a new apple mac book pro and now when I try to download to adobe digital edition I receive this error:Error getting License. License Server Communication Problem: E_ACT_NOT_READY

I upgraded to a new apple mac book pro and now when I try to download to adobe digital edition I receive this error:Error getting License. License Server Communication Problem: E_ACT_NOT_READY

What does that have to do with Digital Publishing Suite?
We’d love to help but if does have something to do with it, please give us
some details.

Upgrade Airport on G5 Power Mac?

I am looking to upgrade the Airport capability on my early 2004 Power Mac G5 2GHz DP to the 802.11n standard. What are my options? Does anyone make an 802.11n-standard Airport card that will fit in this model Mac, or am I restricted to third-party PCI cards or USB sticks? How much trouble has anyone had in upgrading such a model to the 802.11n standard? Any recommendations?
I intend to upgrade my Airport Extreme to an Apple Time Capsule 2TB Dualband at the same time, so any information with regard to third-party card compatibility with the Time Capsule would be welcome.
My thanks in advance,
R. Duke
Brussels, Belgium

Hi-
For 802.11n, third party devices are all that are available.
PCI cards will give less trouble than the USB devices, simply due to the architectural differences between the PCI bus and the USB bus and the respective data handling protocols.
The PCI cards also have better reception due to the antenna that is attached.
Mac options include these:
http://eshop.macsales.com/search/wireless+PCI
The Newertech card would be a good choice, but check for yourself, as far as compatibility, with OWC tech support:
http://eshop.macsales.com/tech_center/index.cfm
Live Chat is quick and easy......

Please help me upgrade my new/used Power Mac G5

I recently receieved a used Power Mac G5, Model Identifier: PowerMac7.2.
The Specs are:
Apple Mac G5 Tower. G5 1.6gHz Processor, 1 Gig DDR Ram, SATA 80 GiG Hard Drive, DVD-R Optical Drive, Nvidia AGP FX 5200 64 Bit Video Card. This unit operates on Leopard 10.5 OS
Can someone who knows Macs well help me with software and hardware. What is the best set up I can have to make my G5 fast, powerful, and up-to-date without buying a new one.
I have a mac book pro. I just want to fix up this older G5. Thanks for reading this, and I would really appreciate your input.

Highest OS you should use is 10.5...Leopard. RAM...between 4GB and 8GB. It will run FCP 7...the entire suite...but it will not convert anything to ProRes. It doesn't have the power. It won't be able to deal with most (talking 80-90%) of the new camera formats (AVCintra, AVCHD, H.264, RED).
Sorry, but that machine is 6 years out of date. Actually...1.6Ghz processor...8 years out of date. There is no way it will be "up to date." Your MacBook Pro will run CIRCLES around it.

Power Mac - G4 QuickSilver and dial-up problem..

Hi all, first post here please excuse my naiviety!
As well as owning a Macbook I've been helping a friend out with their 9-10 yr old G4 Power Mac. The problem started with it not being able to power on so I tried resetting CUDA etc; that didn't work so I sourced a replacement Power Mac (power supply being impossible to replace).
All went well, swapped the HD out of his duff M5183 and put it into the newer QuickSilver. Booted-up fine and apart from running quicker it looked like his old Mac. When he tried dial-up (he can't get BB) he kept getting a no dial tone error. So I had a fiddle and managed to get a tone... however when the 0845 number was dialled all you get is a beep....beep....beep noise like the line's engaged or unobtainable. I managed to inadvertently wipe his ISP settings so tried another ISP (called freeisp, 0844 7110059) - still get the same reply on the line with this.
Question is, I'm guessing the modem on the QuickSilver is different to that on the M5183? Do I need to install drivers? The modem seems to dial out okay so I'm a bit confused.
Any help gratefully rec'd... he hasn't been able to get online for some time now.
Ta, HB

According to this article:
Apple USB Modem: Frequently asked questions (FAQ)
Sep 15, 2008 ... You can use an Apple USB modem with any
Mac computer capable of running Mac OS X 10.4.3 or later.
You MUST have Mac OS X 10.4.3 or later...
http://support.apple.com/kb/HT3152
Even email and sparse internet activity would be slow.
Still, that invites further research to be sure; and also to
check what update or upgrade the computer hardware
may need to be ready for the demands of the OS on it.
Hardware upgrades in RAM chip & hard disk drives are
the primary ones for basic physical upgrade; and then
the OS X. And Panther is not really adequate today...
Tiger has support; Panther has increasingly more wants
that are not met and does not see updates. It's rather old.
You should check into the available "retail boxed" Tiger
full installer sets that have previously been sold to people
and now those persons have upgraded to Leopard 10.5.
These should be priced less than online reseller's retail.
In some places, the universal install DVD set is not costly
once you get away from the retail demand. Amazon is a
source of retail goods; ebay is a place to find retail prices.
Individuals, whose goods you would have to be aware of
before buying (or if given a retail box Tiger installer DVD,
be informed as to what you really had.) Be sure it is NOT a
version made for a single model or series of computer,
since those would only work in that one model line.
Without access to DSL or faster cable broadband, getting
all the update bits for the system would be prohibitive; no
matter the version of OSX (or any OS) it would be too slow.
You may be able to get copies of the correct downloads
from persons you know; but you have to be sure they are
the correct ones, and not versions for some other device.
(Some update files are for Intel-based Mac, not PPC-based.)
If you have a portable computer, a list of upgrade downloads
needed (for a needy desktop computer) and a place to go and
experience fast broadband or adequate DSL, the necessary
update files a new OS X installation would require to be up to
date could be gotten; they could be saved to a CD for later use.
The latest security update, all the java updates, the Combo update,
Quicktime, Flash player, Shockwave Player, modern browsers, &
other items are required to bring even Tiger up to today's web
and daily use if going online (or if using applications needing it.)
With a list of needed applications, and/or web sites where the
downloads could be acquired, and getting 'standalone' versions
for later use in a computer later, one can deal with a slow web
access point at home, by going elsewhere to get the essentials.
And to get them with the idea of making a backup archive for
later re-install should that event of necessity occur. The Apple
Support Downloads site has OS X related updates & is search-
able. So knowing file names to do this, that way, is important.
Having the subject computer at the point where high speed
internet is available makes all kinds of sense, to just update
the newer OS X version and make it work correctly.
And the need for this would become painfully clear to even
someone with no credible amount of experience. Anyone
with hopes of getting a task done in their lifetime could see it.
Good luck & happy computing!
{edited}

Power mac g4 idvd and final cut pro 4

i got a duel 1ghz upgraded power mac 1gh ram but it seems slow to run final cut pro 4 adobe premere 6.5 seems to run slow and crash alot on 10.4.9 and i keep dropping frames i never seemed to have these problems on my imac dv600mhz on os 9 years ago but i do know seems os x is like xp compaired to 9 or os 9 in terms of crashes is my system able to do final cut pro edit video and make idvd movies?

I have a quad core i7 2,0 MiniServer. I bought it mainly for a file/print/web server but it does a great job running Compressor/Qmaster and FCP/DVDSP on occasion.
FW800 has a 80mb/s limit. If you need more than that, you are headed to thunderbolt. For a bunch of reasons, I'd capture with ProRes if you are working through the Matrox.
For simple capturing, it should work. The big caveat is 10.7 will not allow you to install FCS2 (no PPC installer support).
x

See and copy files from a Power Mac without keyboard and monitor

A friend gave me his G4 Power Mac. I think it is a Quicksilver. (I will post some pics of both the front and back on Flickr if anyone wants to see it.) I didn't get the keyboard or monitor cuz I forgot I would need the keyboard to use Firewire Target Disc mode on it. I just need to see what files are on it (and probably copy whatever ones I need onto my newer Powerbook.)
I have a 17" Powerbook G4 DL and a Powerbook Firewire (500mhz, running OS 9.2.2), and another G4 Power Mac ADP set up to always start up in Firewire Target Mode so I can use it like an external drive (which I never do...) and a bunch of older Macs (LC 580, SE...)
How can I get onto this new machine? I need to see what files are on there. I do not have access to another monitor but I might be able to borrow a USB keyboard so I can start it up in Target Mode. Is there anything I can do before I scrounge for a USB keyboard?
I have tried connecting by Firewire and ethernet with both Powerbooks. The Power Mac isn't showing up either way. I am pretty sure it has a CD drive but pushing on the door (one of two on the front) doesn't open it up.
I am assuming the Power Mac is running OSX.
Many thanks.
Cheers,
John L
Message was edited by: John Lippincott

I think it is a Quicksilver
It may be easier to look at the rear panel for some labeling. It may be silk-screened on with white paint and a bit hard to see.A four-digit model number with "M" as a leader will pretty much nail down the model without taking photos that may not show much.Quicksilvers can have models number M8360, M8493, or M8493 depending on the config.
For snopping the drive, it may be easier to pull the drive from the G4 and use one of these extremely handy gadgets:
http://eshop.macsales.com/item/Newer%20Technology/U2NV2SPATA/
to mount the bare G4 drive on your working PowerBook with OSX. It will show up on the PB as an external drive and you can see what's there. The adaptor will be serviceable for more than just checking this hard drive. Anyone with multiple Macs will get a lot of use from it.
Remember that some third-party keyboards do not recognize Mac start-up key combos, and that some current Aluminum Apple boards may not work correctly with older Macs. The Al board with numeric keypad (here) says it will work with Tiger. The wireless ones and the short "non-keypad" version require Leopard or higher.

Hi, I've a Power Mac (7200/120) and like to convert regional files into windows. English files are ok but am haveing problems with files that was written in Bengali version using Bengalics(font) I would appreciate ur help.s

Hi, I'm new to this forum want help from you...
I've a Power Mac (7200/120) & been using for almost 10 years. Now the light of the Monitor is fadeing within five min. I've huge files
written in Bengali Language with a font named BengaliCS. I want to convert this files to Windows so that I can edit those files into
window. I heard there are softwares that convert Mac to Window but don't know they can convert to regional language.
I would appreciate if one can help me on this.
thanks

chand@007 wrote:
I've huge files
written in Bengali Language with a font named BengaliCS. I want to convert this files to Windows so that I can edit those files into
window.
You need to tell us A) what app did you create those files with? and B) what format are they in (.doc, .txt, etc)?
It may be possible to just transfer the files and your font to another machine without conversion depending on how they were made.
Where did you get the BengaliCS font?

Upgraded my 6 yr. old mac to maverics and it seem to kill it. Any thoughts

Can you reverse to a previous operating system?

How much RAM installed?
Do you run any antivirus software on your Mac? Antivirus software can slow down the normal operation of OS X.
Do you run any "crapware" like Mackeeper or any other type of so called hard drive "cleaning" apps?
Have you updated all of your third party software if there are OS X Mavericks updates that can be applied. You may need to go the third party developers' websites if there are no updates through the Mac App Store.
Update all of your Web browser Internet plugins, also.
Also, if you have any third party devices, like keyboards, mice, drawing tablets, hubs, card readers, etc, you need to update the drivers for these devices to OS X Mavericks compatible versions.
Please download, install and run Etrecheck.
Etrecheck is a small, unobstrusive app that compiles a snapshot of your entire Mac hardware system and installed software.
http://www.etresoft.com/etrecheck
Copy/paste and post its report here in another reply thread so that we have a complete profile of your Mac's hardware and installed software so we can all help with your Mac performance issues.

Can I upgrade my Power Mac G3 (Blue and White) to USB 2.0?

I have a B&W G3 (300 Mhz) and a slot loading iMac ((600Mhz) both running 10.3.9. My daughter is looking into buying an iPod Nano which requires USB 2.0 How do I know whether either machine is USB 2.0 compatible ? If not can a USB 2.0 card be installed ?
thanks

Currently you only have USB 1.1. To get USB 2.0, you need to install a USB 2.0 PCI card. However, not all USB PCI cards work in a Mac. Best bet is any card with a NEC PD72101 chipset (xlr8yourmac results recommend the same).Read this for more feedback:
http://www.xlr8yourmac.com/firewire/fwusb_card_deepsleep.html
All of these Cards are NEC chipset based
Adaptec 3100LP
BAFO BF-460
Belkin F5U220
GWC UC-160
IOGear GIC250U
Keyspan U2PCI-5
O'toLink U2-C2B
O'toLink U2-C2A
O'toLink U2-P20N
O'toLink U2-P50
Ratoc PCIU5
USBWholesale UII-PCIP
 Cheers, Tom

Upgrading 1.8 MHz Power Mac G5 (memory and OS)

Similar Messages

Maybe you are looking for