Upgrading 10.3.9 to Leopard on Dual 2.5 G5

Hi,
Currently use a Dual 2.5 GHz PowerPC G5 with OS 10.3.9
For the moment I have 1.5 GB Memory
24' Cinema HD Display
Samtron 94B Display
I use it essentialy with Final Cut Pro Studio HD, early edition which gives me Final Cut Pro v. 5.0.4
I also use Soundtrack Pro 1.0.3
Very occasionally (batch processing) Photoshop Pro 7
I do regularly use Microsoft Office 2004
2 Serial ATA drives (150GB, 250GB) plus external via FW800 other drives.
I intend to purchase some additional memory 4 GB (2*2)
For the moment I would like to continue with my current Final Cut Studio but intend to upgrade to Studio 2 in the next few months.
Questions:
a)Can I upgrade to Leopard, if yes to I have to expect any problems hardware wise.
b) Are my current softwares going to continue functioning or will I have to upgrade or change completely some of them. If yes which one. (I expect Photoshop to be the one)
Thanks in advance for the help.
Regards
Manny

Office 2004 has been working fine for me. Occasionally Excel will hang while quitting, but it doesn't affect any documents.
Photoshop 7 will not work under Leopard. As I recall, it fails to launch. You may want to strongly consider purchasing the upgrade to the latest version of Photoshop, as yours is the oldest version that's still upgradable. When CS4 is released (which will probably be later this year, based on historical release schedules), they may very well no longer allow upgrades from Photoshop 7, forcing you to repurchase the program for the full price.
Final Cut Pro 5.0.4 is also not compatible with Leopard. I don't know what the problems are, other than that Apple has explicitly said that only version 5.1 and above are supported on Leopard. I am currently running 5.1.4 on Leopard with no problems. Since the 5.1.x upgrade is no longer available, you will have to upgrade to Final Cut Studio 2, which you planned on doing anyway.

Similar Messages

I have a dual core mac pro tower , can I upgrade to lion from snow leopard?

I have a dual core mac pro tower , can I upgrade to lion from snow leopard?

The 2006 and 2007 Mac Pros can be upgraded as far as Lion. Mountain Lion can be installed on Mac Pros from 2008 onward. See below:
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Is it possible to upgrade the Mac osx 10.5.11 dual 2.7 Speaking to the issues Such as Mac OS X 10.6

Is it possible to upgrade the Mac osx 10.5.11
dual 2.7
Speaking to the issues
Such as Mac OS X 10.6

There isn't a OSX 10.5.11. It looks like you are asking about how to upgrade from OSX 10.4.11 (as suggested in your profile) to 10.6 (or was this another typographical error and you meant 10.5?) on something with a dual 2.7 processor. If you are talking about a G5 or any G series Mac then you cannot upgrade further than OSX 10.5 Leopard (the forum in which you posted this question). Only Intel Macs can run 10.6 and greater.
It would help to know exactly which computer you are using, which exact operating system version it is using, and which one to which you wish to upgrade.

After upgrade my MBP from snow leopard to mountain lion all my smb connections stop to work.

After upgrade my MBP from snow leopard to mountain lion all my smb connections stop to work.
Now iám using mac os 10.8.2
I can see the server, I can choose the drive, but when try to open a folder the message on Finder is: You don't have permissions to see the content.
I already delete the key and try to connect again, but the problem persist. Already try change the ip from file server. Already try differents users. (admin, guest, etc...)
I have a windows server 2008 and a NAS working with SMB protocol. Both with the same problem.
That problem occurs only on Finder, if I try see the folder by Terminal, is possible to see my files.
Any Solution ?
Any Tip ?
Any Question ?

Not knowing how much RAM is installed in your iMac, your iMac can take a total of 8 GBs of RAM.
Before upgrading to Mountain Lion, I would strongly suggest installing the maximum 8 GBs of RAM.
Correct and reliable Mac RAM can be purchased from online Mac RAM sources Crucial memory or OWC (macsales.com).
Here is OWC's link to your model iMac and the RAM modules you will need.macsales
http://eshop.macsales.com/item/Other%20World%20Computing/8566DDR3S8GP/
You can purchase and download OS X 10.8 Mountain Lion from the Mac App Store in the OS X dock.
Before installing, it would be prudent to make a backup copy of all of your important data or your entire current system. Either using, optical discs, USB flash drives or external hard drives.
This is too insure protection of your data in case something goes wrong with the install of OS X Mountain Lion.
Good Luck!

Before upgrading my system from Snow Leopard to Mountain Lion I had taken a backup of iPhoto in my external drive. But now when I try to open that package, I'm directed to app store to buy new iPhoto. How can I retrieve my photos without buying iPhoto?

Before upgrading my system from Snow Leopard to Mountain Lion I had taken a backup of iPhoto library in my external drive. But now when I try to open that package, I'm directed to app store to buy new iPhoto. Why would apple install iPhoto by default with Snow Leapord and make us import all our photos in it at the first place, and now ask for money if we want to retrieve our photos back on mountain lion? What if they make contacts a paid app with the next OS upgrade, and then bully us to pay money if we want our contacts? This is something very dissappointing on Apple's part. I need answers here.

I fail to remember if the installer gave me an option to keep my applications.
The Mountain Lion installer will not delete applications. It will only mark applications, that are not compatible with your current system with a "forbidden" sign in the icon. And you cannot launch them.
Does your iPhoto icon in the Applications folder look like this?
Then your iPhoto version is incompatible and cannot run with Mt. Lion. If it is iPhoto '11, with a versionnumber starting with 9.x.x., you can upgrade it by downloading a newer version from the Apple downloads site http://support.apple.com/kb/DL1650.
But if you have 8.x.x, you need to buy an upgrade.
Regards
Léonie

After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes". I cannot now access iTunes. How can I resolve

After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes". So, now after the upgrade, I cannot access iTunes. How do I resolve this??
Thanks

zepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Want to upgrade from Tiger to Snow Leopard

I spent over an hour through the apple store web site and cant find a way to upgrade directly from Mac OS 10.4 Tiger to the latest Snow Leopard version.
The Apple web site gives only one purchase possibility : to upgrade from Leopard 10.5 to Snow Leopard 10.6. But how to upgrade from Tiger to Snow Leopard ?

Francois Dormoy wrote:
I spent over an hour through the apple store web site and cant find a way to upgrade directly from Mac OS 10.4 Tiger to the latest Snow Leopard version.
The Apple web site gives only one purchase possibility : to upgrade from Leopard 10.5 to Snow Leopard 10.6. But how to upgrade from Tiger to Snow Leopard ?
this has been oft asked and answered. you can buy a Macbox set which will give you snow leopard, ilife and and iwork. or you can buy a $29 standalong snow leoaprd dvd although there is a big disagreement on the board whether using it to go from tiger to snow leopard directly violates ULA (I think it does). but the actual disk is the same as in the macbox set and either one will upgrade you to SL.

Just upgraded my system to snow leopard...now when I open documents from my memory stick, its in 'pages' not word...how do I fix that??

Just upgraded my system to snow leopard...now when I open documents from my memory stick, its in 'pages' not word...how do I fix that??

Did you click on the little triangle? Did you select one of the document files before pressing COMMAND-I to open the Get Info window? If the panel is closed it looks like this:
If you then click on that little triangle gadget you get this:
A temporary solution is to CTRL- or RIGHT-click on the document file, navigate to the Open With item, and select from the sub-menu.
The first method makes the association permanent. This method only applies to the currently selected document.

I just upgraded an old Imac from Leopard to Snow Leopard, now it won't work

I just upgraded my 2003 imac from leopard to snow leopard and after restart all I get is a blue screen. Nothing happens. How can I get back to the old leopard. I use this computer for research just because of the 23'' screen. Help

I'm sure that a 2003 machine is incapable of accepting Snow Leopard. Have you checked the specs to see if it is ...
Mac OS X v10.6 Snow Leopard -Read the Technical Specifications
In particular, check the amount of RAM you have.
You could contact Apple through your National Apple store with the serial number of your machine to see if they can provide a replacement DVD ... but I doubt they can.
Contact Apple support

Upgrading iMac 4 to Snow Leopard

Hi. My Mum's contemplating upgrading her OS to Snow Leopard, but she has a rather old iMac (as below):
Model Name:    iMac
Model Identifier:    iMac4,1
Processor Name:    Intel Core Duo
Processor Speed:    1.83 GHz
Number Of Processors:    1
Total Number Of Cores:    2
L2 Cache (per processor):    2 MB
Memory:    512 MB
Bus Speed:    667 MHz
Boot ROM Version:    IM41.0055.B08
SMC Version:    1.1f5
Will this work do you think?

Hello:
Here are the requirements for running OS X 10.6:
System Requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply.
Based on the specs, she does not have enough memory.
Barry

My 'old' files have been backed up onto time capsule (Leopard), I have upgraded to Lion (thro snow leopard) and now checking back to retosre some old files i can't see or access beyond the date I upgraded to Lion? Help please?

My 'old' files have been backed up onto time capsule (Leopard), I have upgraded to Lion (thro snow leopard) and now checking back to retosre some old files i can't see or access beyond the date I upgraded to Lion? Help please?

Use the manual methods.. but it is possible for TM to wipe the old files in trying to fit into the space.
Try Q16.. but read all the section 14-17
http://pondini.org/TM/FAQ.html

I am upgrading from Tiger to Snow Leopard. I keep getting an error when I try to load the Mac Os x update combined. It says that it was corrupted during download. Have try loading from Apple website V10.6.7 upgrade combined but it still won't do it?

I have an Intel Desktop iMac and I am upgrading from Tiger to Snow Leopard. I keep getting an error when it tries to load the Mac OS X update combined. It says that it was corrupted during download. Have try loading from Apple website Mac OS X V10.6.7 upgrade combined but it still won't do it? Any other suggestions. The printer is not working either - I am not sure if they are connected. Everything else is fine.

Please excuse, but I have to ask an obvious question: Did you already update using the Snow Leopard Retail install DVD? (You must do this first; 10.6.7 is just an update if you already have 10.6.) Are you, then, trying to update from whatever version was on the install DVD to 10.6.7?
Otherwise, I'd keep trying. The 10.6.7 Combo is a huge update.

I have a mac os 10.5.8, i want to upgrade to mac os snow leopard, can i keep all my files (documents, music on itunes) without backing up all the files first on a external device prior to the upgrade?

I have a mac os 10.5.8, i want to upgrade to mac os snow leopard, can i keep all my files (documents, music on itunes) without backing up all the files first on a external device prior to the upgrade?

I strongly advise against upgrading the OS without first making a backup. Were something to go wrong you would lose all your files without the backup. See:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s).

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Mach

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Machine)?

http://support.apple.com/kb/TS2986

I recently upgraded to Mavericks from Snow Leopard. Does Snow Leopard still exist on my Mac? If so, is it possible to restart under Snow Leopard in order to run PowerPC apps? If not, is there an OS available in 64 bit that supports PowerPC apps? Mav ***.

I recently upgraded to Mavericks from Snow Leopard. Does Snow Leopard still exist on my Mac? If so, is it possible to restart under Snow Leopard in order to run PowerPC apps? If not, is there an OS available in 64 bit that supports PowerPC apps? Mav ***.

The only reason I upgraded to Mavericks was because my Snow Leopard OS was 32 bit, which I was told would support only 4GB of RAM.
That wasn't quite right. You can put in as much RAM as your Mac's hardware supports. The division is in the apps themselves. A 32 bit app can't use more than 4 GB or RAM. A 64 bit app can use much more.
For example, as a 32 bit only version, Photoshop CS3 can't use more 4GB of RAM, no matter how much you actually have installed. CS4 or later can use all the RAM you want to throw at it.

Upgrading 10.3.9 to Leopard on Dual 2.5 G5

Similar Messages

Maybe you are looking for