Upgrading 10g OHS to an apache 2 - mod_so

Hi everyone,
we are running a 10g application server and we wanted to upgrade the apache 1 based OHS to an apache 2 based OHS. The reason is that we wanted to make use of the apache mod_so module but this is not compiled in by default on apache, but it is apparently compiled with apache 2.
Can you give me some guidelines on where i can download the source for OHS and compile it? Or alternatively how i can move from an apache 1 to an apache 2 based OHS ? or what other course of action i can take to have mod_so available?
Thank you very much for your time

Well, just install it, for the steps I think youshould get the installation guide from apache.org, what you will have to do is to configure this apache in a diferent port and at the end, add this url as a Origin Server in Webcache, so it could be accessible.
Sorry but I can't give you much info about how to install it, as I'm not an expert, but I have configure externals apaches to be accesible trew Oracle WebCache, and is at simple as I told, just add it as a origin server.
Greetings.

Similar Messages

Upgrade 10g to 11g

We are upgrading 10G to 11g on the same box(UNIX). I just wanted to what are files I have to take back up before Upgrade. Below are the files I know..Please let me know if any extra
RPP
Catalog
NQSconfig
Instanceconfig
I need to replace those files after installing 11g or edit according to 10G files...
Also wanted to know that, we should install obiee 7.9.6.1 on top of OBIEE 10g so does 7.9.6.1 installs in same folders where 10g installed or it creates separate folder? and
does it creates separate configuration files and catalog path for it it uses the existing 10g files?
Please reply with some suggestions.
Thanks in advance..

Thanks Bala for your useful links..also please let me know does 7.9.6.1 installation creates new path for its installation or it installed with 10g installed folder. I mean to ask 7.9.6.1 installation creates new configuration files and catalog?

Upgrade 10G to use 10G thin jdbc drivers- OCI

This is wierd...
If I upgrade 10G app server to use the 10G thin JDBC drivers, and set up a data source to use the thin drivers, is there any way that I could score a[b] ORA-01010 invalid OCI operation error when I'm not using an OCI driver?
Anyone else seen this...again, it makes no sense...

You can not and should not use JDK 1.2 with 8i drivers.
If you want to use JDK 1.2 drivers, download the 8.1.6 SDK
from external site.
Please, please, please READ the FAQ at www.oracle.com/java/jdbc
before posting
Premal Mehta (guest) wrote:
: Hi,
: Sorry for multiple posting. Previous posting has incomplete
: information. Here's the whole scenerio...
: I have Oracle 8i installed on my server. I have downloaded
: JDBC drivers for Oracle 8i from Oracle site. When I try to run
a
: sample example from the demo files given, I get a Windows
: internal Error "Exception: Access Violation (0xc0000005),
: Address: 0x6ee0fb83". I am using Oracle 8i on Win NT 4.0 with
: SP4, IIS4.0 with 128 MB RAM.
: Also, I am trying to use OCI8 JDBC drivers with JDK 1.2. The
: classpath is set for classes111.zip files.
: I am unable to run applets with JDBC also. On using thin
: drivers, it gives "SO Exception" error.
: I have tried many options but it dosent seem to work.
Please
: help as this is very urgent.
Oracle Technology Network
http://technet.oracle.com
null

Oracle Database Upgradation 10g to 11g in HP unix

Oracle Database Upgradation 10g to 11g (standalone DB & ASM is implemented) in HP unix ?
Kindly furnish the good links and screen shot documents.
Edited by: user11937849 on Apr 9, 2012 4:04 AM

As part of the upgrade, you might research how new Oracle 11g features can help your system run better.
Your upgraded system can effectively start using extended statistics, a very powerful new 11g feature, immediately after the upgrade. I have a detailed blog post on how to do this with OEM - http://iiotzov.wordpress.com/2011/11/01/get-the-max-of-oracle-11gr2-right-from-the-start-create-relevant-extended-statistics-as-a-part-of-the-upgrade
Iordan Iotzov
http://iiotzov.wordpress.com/

Question on deploying 10g & Apex on Linux/Apache. Plus help on Novel NDS.

After see what Apex can do, my management is interesting in bring Apex in house. We have a sever that has Linux and Apache install. We want to deploy Oracle 10g (or 11g whichever most suitable) and the last Apex (version 3.1 right?) on the current platform.
We also want to be to leverage Novel Directory Sever as for authentication and authorization for the Apex application.
We are absolutely new to Oracle and Apex. Would someone please verify that above can done? Possibility provide some pointer on 10g and apex install on Linux/Apache, and on how using NDS with Apex.
Any suggestion or pointer will be Greatly Appreciated.
Susie

Did those references lead you to this?:
http://www.oracle.com/technology/products/ias/ohs/htdocs/php_ohs.htm
-- CJ

NULL and Unspecified in Dashboard prompts after upgrading 10g to 11g OBIEE

Hi All,
We are working on OBI upgradation project from 10g to 11.1.1.6.5. We are facing one issue in Dashboard prompt level. If we can create Dashboard prompt on a column, its giving "NULL", "Unspecified" additionally. But, in 10g there are no extra values.
And the 10g, 11g instances are pointing to the same database and there are no NULL, Unspecified values in Database level.
Through some blogs and articles we found some solutions n are below.
To remove NULL:
-->Go to the Physical Column properties in Physical Layer and Disable the Nullable option by uncheck the box.
-->Go to the Database Features in Physical Layer and disable value to NULL_SUPPORTED.
-->Go to Edit Dashboard Prompt, in Choice List Values drop-down list select SQL Results.
To remove Unspecified:
-->Go to Edit Dashboard Prompt, in Choice List Values drop-down list select SQL Results, then write the SQL statements as columnname is not equals to "Unspecfied" ( In this way we can able to remove Null's also.)
-->Go to Content tab of LTS, in Where clause write an SQL query to restrict Unspecified values.
Note: CHeck with ETL, because if they maintains the Default value is Null when the Datatype is Character and they can maintain 9999 or #### if the datatype is Numeric. And check the Physical query and debug it carefully.
But, we have very big Repository and we have huge no.of Dashboard prompts. So, its not an easy thing to manage by using above solutions. Correct me if there are any mistakes in above.
Any ideas on this...?
Appreciate your help on this..!
Thanks in Advance,
Raghu Nagadasari

Hi Frnds,
As of now, i found the only solution for the above mentioned issue that how to avoid NULL in dashboard prompt level:
Go to the Physical Column properties in Physical Layer and Disable the Nullable option by uncheck the box.
We have done this manually for all tables.
Appreciate if u have any other ideas.!!
Thanks,
Raghu Nagadasari

Unable to login to presentation services after doing the upgrade 10g to 11g

Hi All,
I had a running instance of OBIEE 11g 11.1.1.6.0, my 11g rpd and webcatlog was working fine. Imp to note is that, I had configured external LDAP authenticator and wasn't using the weblogic embedded LDAP.
Now, today, I had to updrage 10g RPD and Webcatlog to 11g and merge into the my current 11g system. I ran the upgrade utitlity and it completed the upgrade successfully but now when I try to login into presentation services using the weblogic user, the presentation services gets hung. It doesn't even give me a message like "Invalid login or password" I DON't get any message but my Presentation services and RPD gets hung( when I try to open it online)
Also, I am trying to refresh the GUIDs after making the necessary changes in the config and instanceconfig.xml file i start the obi server and presentation server, it doesn't come up. So I am unable to refresh my GUIDs
What could be issue here? Do I need to fix an credential file? Please let me know.
Thanks,
Ronny

Ronny wrote:
Hi All,
I had a running instance of OBIEE 11g 11.1.1.6.0, my 11g rpd and webcatlog was working fine. Imp to note is that, I had configured external LDAP authenticator and wasn't using the weblogic embedded LDAP. Was LDAP access working fine before upgrading the 10g rpd and webcat?
Now, today, I had to updrage 10g RPD and Webcatlog to 11g and merge into the my current 11g system. I ran the upgrade utitlity and it completed the upgrade successfully but now when I try to login into presentation services using the weblogic user, the presentation services gets hung. It doesn't even give me a message like "Invalid login or password" I DON't get any message but my Presentation services and RPD gets hung( when I try to open it online)What do the logs say?
Also, I am trying to refresh the GUIDs after making the necessary changes in the config and instanceconfig.xml file i start the obi server and presentation server, it doesn't come up. So I am unable to refresh my GUIDsWhen you say doesn't come up, do you mean the services are down? If yes, what do the logs say about this?

Wrong results after upgrading 10g database to 11.2.0.2.6

Hi,
Do anyone know, why the following query results are different?
Not Working query:
sql1:
select col1 from tab1
where col1 = (select '123' from dual)
Working query:
sql2:
select col1 from tab1
where col1 = '123';
Both the sql1 and sql2 are returning same reseults in 10g database , but not in 11g.

Pl post OS details along with sample outputs and explain plans from the the sql1 statement from the two databases. These MOS Docs may help also
Things to Consider Before Upgrading to 11.2.0.2 to Avoid Poor Performance or Wrong Results [ID 1320966.1]
Wrong Results on 11.2.0.2 with Function-Based Index and OR Expansion [ID 1264550.1]
Wrong Results/No Rows for Sql Involving Functions in 11.2.0.2. [ID 1380679.1]
HTH
Srini

Upgrade 10G to 11.1.1.5 in Clustered environment

I successfully ran the upgrade assistant on a single server install. Both RPD and Catalog upgraded with no issues. I scaled out to a 2 node cluster and attempted the upgrade with the assistant again. This time it fails. Here is log entries:
[2011-07-20T15:16:07.861-04:00] [Framework] [NOTIFICATION] [upgrade.Framework] Starting to upgrade components.
[2011-07-20T15:16:07.861-04:00] [Framework] [NOTIFICATION] [upgrade.Framework] Retain Source Ports: false
[2011-07-20T15:16:07.861-04:00] [Framework] [NOTIFICATION] [upgrade.Framework] Stop 10g Components: false
[2011-07-20T15:16:07.861-04:00] [Framework] [NOTIFICATION] [upgrade.Framework] Start 11g Components: false
[2011-07-20T15:16:07.876-04:00] [Framework] [NOTIFICATION] [upgrade.Framework] Managed server bi_server2 state is: RUNNING
[2011-07-20T15:16:07.876-04:00] [Framework] [NOTIFICATION] [upgrade.Framework] Starting to upgrade BIEE.
[2011-07-20T15:16:07.954-04:00] [Framework] [ERROR] [UPGAST-00138] [upgrade.Framework] upgrade exception occurred
[2011-07-20T15:16:07.954-04:00] [Framework] [ERROR] [upgrade.Framework] Cause: An unexpected upgrade exception has occurred. Action: See the secondary error message for additional details.
[2011-07-20T15:16:07.954-04:00] [Framework] [ERROR] [upgrade.Framework] UPGCMP-02712: Expected oracle.biee.admin:oracleInstance=*,type=BIDomain.OracleInstance,group=Service Oracle instance, found 2
[2011-07-20T15:16:07.954-04:00] [Framework] [ERROR] [upgrade.Framework] UPGCMP-02712: Expected oracle.biee.admin:oracleInstance=*,type=BIDomain.OracleInstance,group=Service Oracle instance, found 2
[2011-07-20T15:16:07.954-04:00] [Framework] [NOTIFICATION] [upgrade.Framework] Finished upgrading BIEE with status: Failure.
[2011-07-20T15:16:07.954-04:00] [Framework] [NOTIFICATION] [upgrade.Framework] Finished upgrading components.
[2011-07-20T15:16:07.954-04:00] [Framework] [NOTIFICATION] [upgrade.Framework] 0 components upgraded with success.
[2011-07-20T15:16:07.954-04:00] [Framework] [NOTIFICATION] [upgrade.Framework] 1 components upgraded with failure.
Question….can you use upgrade assistant in clustered environment?
Thanks!

You can only use the upgrade assistant to upgrade to a single instance Oracle BI 11g server. Typically this is a sandbox server environment or a VM that can simply be wiped clean after the upgrade. Then move the RPD,WebCat, etc. and AppRoles that get created during the upgrade process to a development server. The UA is looking for a single instance installation environment and that environment should be clean/fresh to avoid confusion and conflicts.
Please award points if helpful.

11.5.10.2(upgraded 10g database)

I just installed 11.5.10.2 and upgraded to 10g then after im not able to use ls or any other os commands psz help me out
when i type ls command i am getting following message
ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory

I just installed 11.5.10.2 and upgraded to 10g then after im not able to use ls or any other os commands psz help me outWhat is the OS?
when i type ls command i am getting following message
ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directoryAs what user (applmgr, oracle, root)?

ORA-00001 - unique constraint violation when upgrading 10g EUL

Hi,
I am trying to upgrade my Discoverer 4i to Discoverer 10g.
When I log into 10g, it prompts me to upgrade the EUL. After making the right back up of my 4i EUL, I continue with the upgrade.
During the upgrade, I am hit with this error:
Database error: ORA-00001 unique constraint (EUL_HRMS.EUL5_FOL_UK_1) violated.
I understand that this happens when user tries to insert an already existing value into a column defined as unique. However, I am not sure on how to resolve it.
Can anyone please advice.
Thanks in advance!
Regards,
Harpreet Sidhu

Hi Rod,
I've run the queries and these are the results. Each query returned one row.
1. SELECT FROM EUL_HRMS.EUL5_DOC_FOLDERS*
FOL_ID     100057
FOL_NAME     ROOT
FOL_DEVELOPER_KEY     ROOT
FOL_DESCRIPTION
FOL_EU_ID     100000
FOL_PARENT_ID
FOL_USER_PROP2
FOL_USER_PROP1
FOL_ELEMENT_STATE     0
FOL_CREATED_BY     EUL_HRMS
FOL_CREATED_DATE     19-Jun-09
FOL_UPDATED_BY     EUL_HRMS
FOL_UPDATED_DATE     19-Jun-09
NOTM     0
2. SELECT EU_ID, EU_SECURITY_MODEL, EU_USE_PUB_PRIVS, EU_ROLE_FLAG
FROM EUL_HRMS.EUL5_EUL_USERS
WHERE EU_USERNAME = 'PUBLIC'
EU_ID     3000
EU_SECURITY_MODEL     0
EU_USE_PUB_PRIVS     1
EU_ROLE_FLAG     0
Thanks!

Help needed in Upgrading 10g reports to OBIEE 11g

Hi folks,
We have a set of BI Answer reports which were developed in OBIEE 10g(10.1.3.4.1). We would like to upgrade it to OBIEE 11g. Could anyone please help me out in solving this.
Thanks in advance.
Regards,
Arun

Hi Arun,
Please refer this thread -- step by step with screen shots.
http://www.rittmanmead.com/2011/02/obiee-11g-migrations/
http://www.rittmanmead.com/2010/08/oracle-bi-ee-11g-upgrading-from-bi-ee-10g-repository-web-catalog/
Hope this help's
Thanks,
Satya
Edited by: Satya Ranki Reddy on May 10, 2012 5:53 PM

Problem upgrading 10g Express to Apex 3.1.2

I have Oracle Database 10g Express Edition Release 10.2.0.1.0 installed on windows XP. I want to develop an application using oracle express (apex), so I thought it would be a good idea to upgrade apex (from the default apex 2.0 that came with 10g xe) to the latest, release 3.1,2 before starting. I have tried up to upgrade twice & it has failed. Without going into a ton of details, based on log errors that I saw each time, it looks like installation script, apexins.sql, expects the 1st param to be the default tablespace instead of the password. Any ideas about this?
My other questions are:
1) Prior to upgrading to rel 3.1.2, do I need to create the apex user/passwd FIRST? The doc did not say to create the account first.(so I didn't). It says apexins parameters are the followiing, but the log errors I got seem to disagree:
@apexins <password> <tablespace_htmldb> <tablespace_files> <tablespace_temp>
<images> <connect>
2) Am I following the correct installation instructions for apex rel 3? From what I read, I believe I can go directly from apex rel 2.0 to 3.1.2. I found 2 different install docs for release 3 & they were different. Both docs said to run the change passwd script(apxchpwd) after installation, but one installation doc had 2 additional scripts (which I didn't run). Can someone please point me to the right install instructions?
3) After searching I found an old apex 2.2 installaction tutorial that says you need to install HTTP prior to APEX. Apparently I misinterpreted the 3.1 install doc that said HTTP was already included in oracle 9.2 or higher. I assumed that I didn't need to install HTTP since oracle xe is rel 10. Now I think I need to install HTTP first from the companion CD BEFORE upgrading to APEX 3.1.2. Is this correct?
3) It says that 85M is required in SYSTEM tablespace for apex 3. The system tablespace size is 76800 (default).
Should I increase it before attempting to upgrade again? (I expected the default to be big enough since apex comes with the db)
4)Any suggestions/tips for starting over are more than welcome! Again I saw > 1 doc on how to cleanup a bad installation. Both said to drop the flows_0300 user, but one said to exec wwv_flow_upgrade.switch_schemas, which I did before I did attempted the 2nd install. Am I supposed to run the switch_schemas or not to cleanup a bad install? Also, in the troubleshooting doc I did not see an option for calling switch_schemas for my apex release (2.1) so I just followed the examples and substituted 'FLOWS_020100'. for 'FLOWS_020200' parameter. Was that a good or bad idea?
5) Is there any other software (i.e application, server?) that needs be to installed before or after apex 3.1.2? Anything else I missed? The documentation is not clear & has omissions.
Thanks.

Hi,
I'm assuming that you're doing this on a Windows based machine and Apex 3.1.2 has already been downloaded from the Application Express webpage and will use port http 8080.
NOTE: Make sure your Oracle Database XE does not automatically startup when Windows boots up. If that is the case, then kindly disconnect Oracle Database XE before proceeding with any of these steps.
Step 1: Unzip Apex to a suitable location (preferable "c:\oraclexe\apex").
Step 2: Start a SQL Plus session from c:\oraclexe\apex and login as a "sysdba".
sqlplus / as sysdba
Step 3: Install Apex.
+@apexins SYSAUX SYSAUX TEMP /i/+
Step 4: Reconnect Oracle Database XE.
Step 5: Assign/Set images PATH for APEX in APEX_HOME folder where we have unzipped APEX i.e. c:\oraclexe.
[email protected] APEX_HOME+
Step 6: Assign/Set administrator credentials for/to APEX.
[email protected] your_password+
Step 7: Restart Oracle Database XE.
Step 8: Apex configuration completed. Availability will be as follows:
Apex availability: http://localhost:8080/apex
Apex Administrator: http://localhost:8080/apex/apex_admin
Follow these steps and let me know if this works for you or not.
Regards,
Naveed.

Upgrading 10g(9.0.4.3) to 10.1.2.0.2

hi,
Has anyone upgraded OAS 10g(9.0.4.3) to 10.1.2.0.2 successfully?
I have a non-colocated infra tier here.
Suse EE Linux 9 (no patch)
Infra and mid tier are installed on the same box but different Oracle_Home.
MR database is located on another box which has ben patched to version 10.1.0.5.
Webcache on mid tier, as I understand from the previous guy, is configured as a reverse proxy.
SSO server is configured as a virtual host.
I have attempted twice to upgrade my OAS unsuccessfully, especially for infra tier.
Mid tier upgrade do have some issues, but I already found out the patches required to fix that.
I begin my upgrade by upgrading the infra tier first since I'm on version 9.0.4.3 which the Oracle upgrade guide mention is possible.
But after upgrading the infra tier successfully without errors, I cannot access my SSO home page. I noticed also that the http daemons are started as root and there are lots of defunct httpd processes. These httpd processes keep spawning and dying. From the IAS management console for infra, "Single Sign-On" service is in unknow status, while the HTTP_Server service keeps going up and down.
opmnctl status on infra tier shows all services as "ALIVE" even when HTTP_Server service in IAS console keep swinging up and down.
Anyone have any clues?
I desperately need advise cause I upgrading a production environment.
I did upgraded my development environment successfully, but didnt faced any issues with infra tier upgrade. But having said that, my development environment do not have Webcache configured as a reverse proxy
Please advise.
Regards
Jimmy

Hi,
Anyone can help?

Custom Reports Server Issue (upgrading 10g to Weblogic 11g)

I am having an issue with "Anonymous' user showing up when I go into the console of the Weblogic server to see all the report requests. In 10g (which we are upgrading from), I have report requests that I do a Preview from within Oracle Forms. When I do the RUN_REPORT_OBJECT/SHOW.WEB_DOCUMENT, it captures the User account and put it in the console with that username. On 11.1.1.4, using same form/report, it doesn't capture the username. If I call the reports server from the database, it does work fine.
Anyone have any ideas if there's something I have to do in Oracle Forms to put that username in or if it's a setting on the Custom Reports Server that i need to set so that it captures the name from the Oracle Forms session.

Hi A. Drieux,
Thanks for the reply. i have some questions on ODI.
Now we are using hyperion 11.1.1.3 with ODI 10.1.3. We are upgrading hyperion version 11.1.1.3 to 11.1.2.2.
Is it possible, to use the same ODI 10.1.3 version to upgrade version(hyperion 11.1.2.2) also?
Reply would be appreciated.
Thanks,
mady

Upgrading 10g OHS to an apache 2 - mod_so

Similar Messages

Maybe you are looking for