Upgrading 2 machines to SL - 1 of them has an external HD with Time Machine

hello all.
my setup and configuration are as follows:
machine 1 (home computer): Mac mini with external HD (not partitioned) used by Time Machine for automatic backups. No Boot Camp partition. WinXP on Parallels 5 beta for occasional use.
machine 2 (work computer): Macbook white with no external HD. WinXP on Boot Camp partition for occasional use. Another WinXP installation on Parallels 4 for full-time work use.
i plan on upgrading (not Erasing and Install but just upgrading) both machines to Snow Leopard, but have a doubt about machine2. since it is not attached to an external backup drive, and since it has very important work documents, how should i do to back it up before upgrading to SL?

No, Winclone's is a compressed disc image and doesn't take up too much room. You can fit it on your hard drive (it is a Mac application.) So only one clone is required. You may even be able to create a large enough partition on an existing external drive if it's large enough without having to lose anything by partitioning on the fly via Disk Utility:
To resize the drive do the following:
1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
2. Click on the Partition tab in the DU main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. +(Note: You can only make a partition smaller in order to create new free space.)+
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.

Similar Messages

  • Had to wipe my drive so I could do a clean install of snow leopard Now I look every where on how to move bookmarks, address book and I cal settings.  I have them back up on a external drive with Time machine but can not move, copy or restore my old sett d

    Had to wipe my drive so I could do a clean install of snow leopard.   Now I have look every where on how to move bookmarks, address book and I cal settings.  I have them back up on a external drive with Time machine but can not move, copy or restore my old settings.  The instructions I have found or no help or needs more clarafication on what to do.

    Use migration assistant to move your files.  http://support.apple.com/kb/HT4889

  • Using the same external drive with Time Machine on new mac?

    I recently got a new mac because my old one broke. Thankfully, I had a fresh backup on Time Machine ready to restore onto my new computer. But when I try to use Time Machine with my new computer, it keeps wanting to do a whole new backup. It won't recognize the latest backup to only add new or changed files.
    Here's a breakdown of my events:
    new computer
    restore Time Machine on new computer at install
    want to continue using the external drive with Time Machine from where I left off (only adding new files since the last backup) on my new computer
    Time Machine wants to do a whole new backup
    Question: How can I continue to use my existing external hard drive with Time Machine on my new computer, picking up where I left off (not a new, complete backup)?
    My old computer was Snow Lepoard, my new one is Lion.

    Bergers wrote:
    new computer
    restore Time Machine on new computer at install
    That should have left a "trail" in your SystemMigration log, so Time Machine can figure out what happened and automatically "inherit" the old backups.  But sometimes, obviously, that doesn't work.
    Since it didn't, there's a chance you can do it manually.  See #B6 in Time Machine - Troubleshooting.

  • Can I use a 2tb external drive with Time Machine to backup my Mac Mini (256gbSSD + 2tbHDD)?

    Can I use a 2tb external drive with Time Machine to backup what I have on my Mac Mini?
    My Mac Mini has one 256 SSD and one 2tb HDD. I want to use Time Machine to do a backup of everything.
    Would an external 2tb My Passport Drive by Western Digital work for the backup?
    It seems like it would not work because the total storage on the Mac Mini is 2304 gigabytes (SSD + HDD).
    And the external Western Digital drive is only 2048 in gigabytes versus 2304 gigabytes the Mac Mini has.

    No. A Time Machine backup drive should have at least twice the capacity of the drive it backs up. You would need at least a 4 TB backup drive for Time Machine.
    Might I suggest as an alternative that you not use Time Machine but a third-party backup utility that simply overwrites older files with new ones such that the backup drive can be the same capacity as the drive backed up.
    Suggested Backup Software
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Others may be found at MacUpdate.
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files.

  • Can I use the ipod classic as an external hardrive with time machine as well as an ipod for my mac book pro OS X?

    Can I use the ipod classic as an external hardrive with time machine as well as an ipod for my mac book pro OS X?

    No. Time Machine has been specifically written not to back up to an iPod.
    (58364)

  • I backup to an external hdd with Time Machine, when it ran out of space it did not delete old backups, now my internal hdd says its full when before it had heaps of space. I have searched for extra files but cant find any. Can anyone help, please.

    I backup to an external hdd with Time Machine, when it ran out of space it did not delete old backups, now my internal hdd says its full when before it had heaps of space. I have searched for extra files but cant find any. Can anyone help, please.

    First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
    To locate large files, you can use Spotlight as described here. That method may not find large folders that contain a lot of small files.
    You can also use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Proceed further only if the problem hasn't been solved.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    Install ODS in the Applications folder as usual.
    Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
    When you're done with ODS, quit it and also quit Terminal.

  • I've recently bought a Time Capsule (3TB); then I've added an external HD of 2TB to my TC via its USB port to store my iTunes Libraries. I would like to backup my external HD with Time Machine in the HD of TC. Is it possible?

    I've recently bought a Time Capsule (3TB); then I've added an external HD of 2TB to my TC via its USB port in order to store my iTunes Libraries.
    I would like to backup my external HD with Time Machine in the HD of TC. Is it possible?

    I would like to backup my external HD with Time Machine in the HD of TC. Is it possible?
    Sorry, but not possible.
    Time Machine can only back up the internal drive(s) in a Mac....or a drive that is connected directly to a Mac via USB or FireWire.....provided that the drive is formatted in Mac OS Extended (Journaled).
    I am not recommending this, but you might be able to move the drive from the USB port to the Mac, and have Time Machine back it up that way.....then move it back to the USB port on the Time Capsule......but this will involve doing some risky things.....and manually changing settings around everytime you make the swap. Something will surely go wrong....but up to you if you want to try it.
    Carbon Copy Cloner will back up the drive connected to the USB port on the Time Capsule to the Time Capsule disk, but these will not be Time Machine backups.  SuperDuper claims to also be able to do this.....but I have not tested it.

  • External Drive with Time Machine, booting from external drive with utilitie

    I'm using Time Machine now with
    a LaCie 1TB external hard drive.
    Everything works fine.
    But, I've been wondering:
    Can I place a program like TechTool
    on the external drive (that Time Machine uses)
    and boot from that external drive.
    I would like to be able to do that,
    because diagnostics and repair programs
    only works properly and fully when they run from
    external drives. Anything on the internal drive can be repaired
    and examine. Impossible to do if Techtool is on the same
    drive that's been examined.
    Any thoughts as to what I should do?
    Thanks
    iMac, Leopard, Time Machine, Lacie Quadra 1TB drive.
    P.S. Stupid question: If my computer crashes, and I reboot from Time Machine
    (from the external drive) how does the computer know which backup to take ?!?
    Isn't there many versions of the OS on the Time Machine backup taken at different times?

    pitou wrote:
    P.S. Stupid question: If my computer crashes, and I reboot from Time Machine
    (from the external drive) how does the computer know which backup to take ?!?
    Isn't there many versions of the OS on the Time Machine backup taken at different times?
    As V.K. says, you can't boot from TM backups.
    But you can restore your entire system from any one of them, per the procedure in #14 of the Frequently Asked Questions *User Tip,* also at the top of this forum.
    You can also selectively restore from them, while running normally. See #15 in the FAQ Tip.
    You might want to review these:
    Time Machine Tutorial
    Time Machine 101
    How to back up and restore your files
    Time Machine Features
    Apple - Support - Mac OSX v10.5 Leopard Time Machine
    and perhaps browse the rest of the FAQ Tip.

  • How can I set up an external harddrive with time machine that already has data on it without losing the data?

    I have an external hard drive that I use to hold photos and other files on that no longer fit on my macbook. I also use the external hard drive for back ups set up with time machine. I don't believe I ever did anything to partition it, I've just always had separate folders (Photos, Music, etc) with one being called "Back Ups" (or Backups.backupdb) that my time machine back ups would automatically go into. Recently, I made the switch from my HDD in my macbook to a new SSD of the same size. I used the back ups on the external hard drive to restore all my content, which all worked out fine. My problem now is in using my external hard drive. When I plug it in, it no longer seems to be working with time machine. Also, I was organizing some files within the external hard drive, and when I dragged one into a folder, it took a while to load. Before, it was instantaneous moving a file already on the external hard drive to another location within it. Can anyone help me in getting the external hard drive to work with my new SSD? I don't want to delete any of the folders or back ups that are already on it, since that's the only place I have some of those files. Please let me know if you need anymore details. Thanks! (sorry if this is posted in the wrong forum)

    First, she has to be logged in to the same iTunes account as she used on the old computer.
    Second, when she plugs the iPhone in to iTunes, right click on the phone name and select transfer purchases.
    Third, enter one contact and one calendar entry into the new computer's addressbook/calendar.
    After that, she should be fine.

  • Trouble backing up external drive with time machine

    I have a small USB stick that I use to store important documents but documents that I don't access very often.  I have an additional 500 GB hard drive that I use for backing up with Time Machine.  I want Time Machine to backup both my internal hard drive (Macbook Air 2011 Lion) as well as the small USB stick. I've searched the forum and discovered that I needed to reformat the USB stick, which I did (it is now Mac OS Extended).  The USB now appears in the list of excluded drives in Time Machine preferences, which I removed.  Thinking that Time Machine would be backing up my USB stick now, I backed up and then turned the computer off.  The next day, I looked at the external drive, and it didn't seem to have a backup of the USB.  I entered Time Machine and the USB is "greyed out" which means it wasn't backed up. I've retried backing up several times by including the USB in Time Machien preferences, but it seems that when I click "save" it doesn't actually save because when I open Preferences up again, the USB stick is in the list of excluded items again.  Have I done something wrong?  Any imput would be greatly appreciated.

    I don't use Time Machine but my view is that it is too dangerous for sticks which may be removed - I understand that it may delete previous backups if it discovers that the stick no longer exists.
    You could:
    manually copy the stick to your main drive from time to time
    use Carbon Copy Cloner to backup the stick
    use a utility to mirror the stick to your main drive

  • Backing up client to server external drive with Time Machine - problems...

    Hi,
    I'm running 10.5.2 server on a MacMini (G4 1.25GHz/1GB) which has an external firewire drive that has been set as a sharepoint for Time Machine backups. The problem is that from the client MacBook (10.5.2 - connected on a wireless g network) I can select the drive in the Time Machine preferences but when I accept the changes it resets to the 'off' position.
    Hmmm? Any ideas?

    The server wasn't set up in Advanced. I'm not trying to back up the server itself but the client.
    Can anyone offer any ideas!?

  • External Drive with Time Machine Disappears

    I use time machine to backup my hard drive to a Book Studio External Hard Drive.  But after a day or two, the icon for the backup will disappear off the desktop and the system stops doing the automatic backcups.
    It is relatively easily bring it back online but within a day or 2 the icon will disapper and the backups stop again. 
    Thanks for any help
    All my best and Thank you

    You are using Lion.. it is a statement almost.. but it seems lion has 10x the issues with forgetting its own name as well as every other network device.. but you can say I am in error.
    There is probably no fix until apple decides it really should do something about it.. in the meantime the windows solution is the only useful one.. turn it off and on again.. !!
    There was one suggestion.. which I find hard to believe.. that if you prevent the disks spinning down in the computer then it will stop the issue.. how that relates to anything I don't know but it gives you something to try.

  • Can I backup another external HD with Time Machine/Capsule?

    I have two external 250GB hard drives hooked up to my mac via USB. One for Time Machine and one for files. Does anyone know if it’s possible to backup my external HD for files to the external HD for Time Machine?

    using the usb connected to the TC the readme says its doable. Just try it , what can it hurt unless you have valuable files on it.

  • Retrieve iPhoto files from external drive with Time Machine

    I can retrieve all other files with Time Machine (including photos in Pictures) but not my iPhoto pics. Have read a few suggestions but having trouble following.
    Thanks in anticipation, Ernest.

    If you are trying to restore individual photos saved in iPhoto, you cannot do that. Instead, you need to restore the whole iPhoto library.
    To prevent the lose of the most recent photos, go to the folder where you have got your iPhoto library (by default, Pictures) and copy it to another folder. Then, in that folder, open the Time Machine app (in /Applications/Utilities), navigate through your backups and restore the iPhoto library you need

  • How to back up an external hd with time machine

    I just bought a 1Tb WD WD for MAC which i willuse as my Time Machine backup and I want to use my 500GB Maxtor as an external HD to store media, I am not sure how tom make sure Time Maching backs up my internal HD and me external HD or is that automatic?

    beatsc wrote:
    Ok so it just asked me which I wanted to exclude to I didn't select any
    It doesn't really ask that -- and internal HDs are backed-up by default, but externals are excluded by default.  Look at the exclusion list in TM Prefs > Options.  Anything listed there is not being backed-up.  To back it up, select it and click the minus sign at the bottom.  If it's listed in gray, however, it's not formatted for a Mac and Time Machine can't back it up.  See #10 in Time Machine - Frequently Asked Questions for details.
    How is is possible that my 500GB external is almost to capacity?  Is it because it used to be my Time Machine and I must delete those backups?
    Most likely.  If you don't erase a disk, whatever was there is still there. 
    If you don't have other data on it that you need, just erase it with Disk Utility.
    If you do, you've got a problem; OSX doesn't like deleting Time Machine backups via the Finder.  If you feel you have no choice, do it when you have quite a bit of time.  Deleting them will be quick and easy, but emptying the trash won't.  If there's a problem, see #E6 in Time Machine - Troubleshooting.

Maybe you are looking for

  • Why can't I open my settings?

    Here are all the details. I haven't charged my ipod, so it's been dead for a day or so. When I held the home button and the start button, the please plug into wall sign did not pop up. After I charged my ipod, I had noticed that my ipod's time and wi

  • How to download a module pool program along with its screens ,includes etc

    Hello Experts, How can I  download a module pool program along with its screens ,includes etc to my presentatio0n server and then upload it back when needed. When  I searched , I got a program which is satisfying my partial requirement because it onl

  • Vim is screwed

    in vim when i am in insert mode (i) i hit backspace instead of deleting (as it allways did) it adds blue '^?' to the text whats up with it ?

  • IPhoto NOT to launch when pluggin in iPhone 3GS

    Hi folks, Is there any way to configure iPhoto to NOT launch every time my iPhone 3GS is connected to my Mac G5? I am running iPhoto 5 and under Preferences > General there is not a function to instruct iPhoto to not aunch when my iPhone is connected

  • USEREXIT to update BSEG-BVTYP field through VF01 transaction

    Hi Folks ! I have a requirement where I have to update the Partner Bank Type(BSEG-BVTYP) field through the transction VF01. I tried with many exits like SDVFX008, RV60AFZC, RV60AFZZ and Includes like ZXVVFU01, ZXVVFU08, but unfortunately no results.