Upgrading 4.7 to netweaver

HI,
I am confused about netweaver technology.Right now i am using SAP 4.7 version.How can i upgrade to netweaver.Can i upgarde from 4.7 to netwaver or is it a totally different paltform.
Thanks
HKP

As such 4.7 is the classical R/3 ERP and NW04 is the more internet related product and thus are different products. So upgrading is not the question.
I've heard that one could consider to upgrade the underlaying WAS 6.2 to WAS 6.4 if one needs to.
More info on NW4 can be found at service.sap.com/nw04

Similar Messages

Upgrade: Adapters for SAP NetWeaver PI 1.1

Hello!
By the upgrade to SAP NetWeaver PI 7.3 we get (within Solution Manager Maintenance Optimizer) a addon Adapters for SAP NetWeaver PI 1.1.
Question
Do we need this addon when we go to SAP NetWeaver PI 7.3 or can we install this after the upgrade with SAINT?
thank you!

Many thanks!
I also have been asked (within Solution Manager Maintenance Optimizer) to update following contents:
EHP Component XI CONTENT ESM ERP 604
EHP Component XI CONTENT IS-H_IC 604
EHP Component XI CONTENT IS-H 604
Makes it sence to update with the upgrade process or can it wait?
Thank you!

How to upgrade NetWeaver 2004 to NetWeaver 2004s in order to abtain WD for

Hi Experts:
At the minimize level, How to upgrade NetWeaver 2004 to NetWeaver 2004s in order to abtain the capabilities of Web Dynpro for ABAP ?
FYI: NetWeaver 2004 is run in my server.

hi Guixin,
During Netweaver 2004s upgrade, the upgrade program detects what software is installed on the source release system and maps it to the SAP NetWeaver 2004s usage types. SAPJup then upgrades your system to a
system with the determined usage types.
Please refer to the section '1.2.5.3 Upgrade Paths: Overview' of the Upgrade Master Guide : SAP NetWeaver 2004s to have details about the target release of the usage types which will be mapped to the components installed on the source system.
Netweaver 2004s Upgrade guides are available on SAP Service Marketplace http://service.sap.com/instguidesnw2004s
Hope this information help you in your upgrade tasks

SAP Best Practice For Unicode Upgrades - NetWeaver 2004s

Team SAP,
I have a customer that is starting to plan for a Unicode upgrade. The question from the customer is as follows:
What is the SAP Best Practice for Unicode Upgrades? They will be upgrading from a BW 3.5 System to NetWeaver 2004s, and their question is ... should they:
a) Perform the Unicode Upgrade At The Same Time As Their BW 3.5 > NetWeaver 2004s Upgrade, or
b) Perform NetWeaver 2004s Upgrade first, and then at a later date, perform the Unicode Upgrade?
Thank you in advance for any guidance or counsel you may be able to offer.
-M

Hi Michael,
Check these links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ee7407a0-0501-0010-81ae-e329029b1074
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7e259990-0201-0010-6085-e7c5aec5af1d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5411d290-0201-0010-b49b-a6145fb16d15
Bye
Dinesh

How to upgrade NetWeaver 2004 SS19 to 2004s SPS10????

Hi,
I cannot find any useful information on HOW to do this. Some links I follow eventually lead me to this page:
https://websmp201.sap-ag.de/~sapidb/011000358700001130682005E
which say that if you're running NW2004 SS19, it must be upgraded to SPS10.
Furthermore, NW2004 uses SAPINST, but NW2004s uses JSPM. I can find info on updating NW2004 and NW2004s installations, but how do i get the stack from NW2004 to NW2004s????
Any help would be MOST appreciated!
Thanks!
David

Hello David,
The upgrade tools are able to include SP Stacks of your target release into the upgrade procedure:
1. The tool checks your current SP Stack and gives you the information which minimum SP Stack level you should use for your target release (the so-called "equivalence Support Package level"). This Support Package must be included so that no data is lost in the upgrade.
2. You download the required SP Stack level (or a higher level) from SAP Service Marketplace and enter in the GUI of the upgrade where your SP Stack files of SAP NetWeaver 2004s are located on your hard disk.
3. The tool will then upgrade your system from SAP NetWeaver '04 to SAP NetWeaver 2004s and also apply the downloaded SP Stacks.
So, the result of the upgrade in your case would be an SAP NetWeaver 2004s SP Stack 10 system, no manual patching would be required as part of the upgrade.
For more information, see the upgrade guide for SAP NetWeaver 2004s (available at http://service.sap.com/upgradenw2004s). There, also the Upgrade Master Guide is available that provides further information concerning the planning of your upgrade.
I hope this information helps to get an idea of the overall procedure.
Best regards,
Boris

SAP Netweaver 7.3 upgradation

Dear Friends,
I have runing SAP Netweaver 7.0. Oracle 10.2.0.2 and OS is HP-UX 11i v2.
Now I want to upgrade the same with Netweaver 7.3.
I have gon through the solutin Manager , I have selected option upgrade and then my systems and gone through all the processes.
But it is only giving teh support pack files.
Please, if any one has does that share teh document and help me.
Regards
Ganesh Datt Tiwari

tiwari.ganeshdatt wrote:
> I have gon through the solutin Manager , I have selected option upgrade and then my systems and gone through all the processes.
> But it is only giving teh support pack files.
You are correct here, the Solution Manager will download only the SPs not the 'Upgrade DVDs'.
Upgrade media is to be downloaded from OSS. Please read the installation and upgrade guide thoroughly as well as verify the OS and DB release requirement and compatibility with NW 7.3
BTW, 'SAP Netweaver 7.3 upgradation' -- this is called an 'upgrade', not 'upgradation' - just to be sure we use the correct technical terminology.
Thanks

Upgrade from SAP R/3 Enterprise 4.70 to ECC 6.0

Hi experts,
I am currently trying to build some knowledge for my final project. (Working as an apprentice in computer science atm)
Main goal of the project is to upgrade our dev system to ECC 6.0.
As far as I understand it, ECC 6.0 ONLY works with NetWeaver 7.0. Do I need to upgrade to NW7 before I upgrade to ECC 6.0 or is there a all-in-one package, which upgrades both at once?
I browsed through a few upgrade guides but didn't really find an explaination I could understand...
Could someone describe the basic steps for such an upgrade? (Like: Copy System - Upgrade NW - Install Components....)
Kinda desperate
Thanks in advance!
Sandro Bollschweiler
P.s.: I hope I used the right Forum for my question...

Hi,
When you upgrade to SAP ERP 6.0 (ECC 6.0), the underlying technology within the SAP R/3 4.7 system is automatically upgraded to the SAP NetWeaver 7.0 version. It is one upgrade;
SAP R/3 4.7 -
> upgrade -
> SAP ERP 6.0
SAP Web AS -
> SAP NetWeaver 7.0
The upgrade guides are you best place for information. The SAP ERP 6.0 has the steps to follow and all requirements.
For installations, please see the aptly named installation guide title "Master guide - SAP ERP 6.0". Both the upgrade and installation guides are available at service.sap.com/instguides.
For system copy info, see the SDN page: System Copy and Migration
There is some demo examples here too
All the best,
Mike.

ST-PI Add-on for BW 3.1 to BW 3.5 PREPARE/UPGRADE

We're trying to Add-on ST-PI as a part of our PREPARE and UPGRADE from BW 3.1 to 3.5. We are currently in the IS_SELECT PHASE and have ST-PI 003C_620. I downloaded the ST-PI 003C_640, SAPCAR'd it in the upgrade directory, but it still seeks to find the correct upload. Any suggestions on what I should actually download???
By the way..this all on HPUX Itanium w/ ORACLE
Hope someone can help.
Jay

Hi Michael,
please check the installation / master guide in the SAP Service Marketplace (links can be find by searching this forum with the respective terms).
This shoul have the information needed.
In addition, you can check
<a href="http://service.sap.com/upgrad">SAP Service Marketplace /upgrade</a>
Cheers
SAP NetWeaver BI Organisation

Start NetWeaver 7.10 with many dynamic WP fails

Hello,
we have upgraded a system to Netweaver 7.10 and are now testing the possibilities of dynamic Workprocesses, since they are very interesting to us. According to the SAP, a max. number of 600 dynamic Workprocesses is possible.
We can configure up to 240 Workprocesses (rdisp/wp_max_no=240) and start the application server without any problems.
If we configure over 240 dynamic Workprocesses (e.g. rdisp/wp_max_no=241 or more), the dispatcher fails with the following error message:
ERROR => EvtCreate: Variable Event Keys exhausted [evtux.c      612]
ERROR => DpWpEvtInit: EvtCreate (rc=1) [dpxxwp.c     447]
DP_FATAL_ERROR => DpSapEnvInit: DpWpEvtInit
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
No matter which trace we turn on, there is no more information than this.
Has anyone experienced this type of problem before? What could be the problem?
I cannot find any information about this error message.
Here is a summary of the dev_disp Tracefile:
Wed Mar 25 09:33:53 2009
kernel runs with dp version 98(ext=114) (@(#) DPLIB-INT-VERSION-098)
length of sys_adm_ext is 376 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (37 786492) [dpxxdisp.c   1228]
        shared lib "dw_xml.so" version 139 successfully loaded
        shared lib "dw_xtc.so" version 139 successfully loaded
        shared lib "dw_stl.so" version 139 successfully loaded
        shared lib "dw_gui.so" version 139 successfully loaded
        shared lib "dw_mdm.so" version 139 successfully loaded
        shared lib "dw_rndrt.so" version 139 successfully loaded
        shared lib "dw_abp.so" version 139 successfully loaded
        shared lib "dw_sym.so" version 139 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
rdisp/dynamic_wp_check : 1
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >va25m0_TBX_37                           <
DpShMCreate: sizeof(wp_adm)             350416 (1448)
DpShMCreate: sizeof(tm_adm)             64665856        (25856)
DpShMCreate: sizeof(wp_ca_adm)          56000   (56)
DpShMCreate: sizeof(appc_ca_adm)        123200 (56)
DpCommTableSize: max/headSize/ftSize/tableSize=2000/16/2304048/2304064
DpShMCreate: sizeof(comm_adm)           2304064 (1136)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65584/90400/156032
DpShMCreate: sizeof(slock_adm)          156032 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=40200/16/3859248/3859264
DpShMCreate: sizeof(file_adm)           3859264 (80)
DpShMCreate: sizeof(vmc_adm)            374672 (1864)
DpShMCreate: sizeof(wall_adm)           (320048/432336/64/104)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: sizeof(j2ee_adm)   2016
DpShMCreate: SHM_DP_ADM_KEY             (addr: 700000020002000, size: 72653616)
DpShMCreate: allocated sys_adm at 700000020002010
DpShMCreate: allocated wp_adm_list at 700000020003ed0
DpShMCreate: allocated wp_adm at 7000000200040c0
DpShMCreate: allocated tm_adm_list at 7000000200599a0
DpShMCreate: allocated tm_adm at 7000000200599f0
DpShMCreate: allocated wp_ca_adm at 700000023e05300
DpShMCreate: allocated appc_ca_adm at 700000023e12dd0
DpShMCreate: allocated comm_adm at 700000023e30f20
DpShMCreate: allocated slock_adm at 700000024063770
DpShMCreate: allocated file_adm at 700000024089900
DpShMCreate: allocated vmc_adm_list at 700000024437c50
DpShMCreate: allocated vmc_adm at 700000024437d00
DpShMCreate: allocated gw_adm at 7000000244934a0
DpShMCreate: allocated j2ee_adm at 7000000244934e0
DpShMCreate: allocated ca_info at 700000024493cd0
DpShMCreate: allocated wall_adm at 700000024493cf0
DpCommAttachTable: attached comm table (header=700000023e30f20/ft=700000023e30f30)
DpSysAdmIntInit: initialize sys_adm
MBUF state OFF
DpCommInitTable: init table for 2000 entries
DpFileInitTable: init table for 40200 entries
DpSesCreateTable: created session table at 700000060000000 (len=1324896)
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
DpParseQueueSizeCheck: invalid input 1 (0)
DpParseQueueSizeCheck: error parsing >1<
ERROR => EvtCreate: Variable Event Keys exhausted [evtux.c      612]
ERROR => DpWpEvtInit: EvtCreate (rc=1) [dpxxwp.c     447]
DP_FATAL_ERROR => DpSapEnvInit: DpWpEvtInit
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Mar 25 09:34:08 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >va25m0_TBX_37                           < (normal)
DpJ2eeDisableRestart
DpHalt: switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1238]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxwp.c     1670]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1238]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxwp.c     1670]
DpHalt: stop work processes
DpHalt: terminate gui connections
DpHalt: wait for end of work processes
DpHalt: not attached to the message server
DpHalt: cleanup EM
SHM2_EsCleanup: ====================
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
SemKeyPermission( 65 ) = 0740 (octal)
ShmCreate( 76, 0, 2, 0x11063e460 )
ShmKeyPermission( 76 ) = 0740 (octal)
ERROR => EvtClose: Invalid Event Handle [evtux.c      910]
ERROR => EvtClose: Invalid Event Handle [evtux.c      910]
DpHalt: cleanup event management
DpHalt: cleanup shared memory/semaphores
SemKeyPermission( 1 ) = 0740 (octal)
SemKeyPermission( 6 ) = 0740 (octal)
SemKeyPermission( 7 ) = 0740 (octal)
SemKeyPermission( 8 ) = 0740 (octal)
SemKeyPermission( 69 ) = 0740 (octal)
SemKeyPermission( 70 ) = 0740 (octal)
DpHalt: MiCleanup
ShmCleanup( 62 )
ShmCreate( 62, 0, 2, 0xfffffffffffece0 )
ShmKeyPermission( 62 ) = 0740 (octal)
ERROR => ShmCleanup(62) failed 3 [mpixx.c      3943]
MpiCleanup() -> MPI_ERROR: General error
DpHalt: removing Semaphore-Management
DpHalt: removing request queue
ShmCleanup( 31 )
ShmCreate( 31, 0, 2, 0xfffffffffffecf0 )
ShmCleanup( 10 )
ShmCreate( 10, 0, 2, 0xfffffffffffed70 )
ShmProtect( 10, 3 )
ShmCreate( 10, 0, 2, -> 0x700000000000000 )
DpHalt: closing connect handles (dgm + tcp)
***LOG Q05=> DpHalt, DpHalt ( 786492) [dpxxdisp.c   11179]
DpHalt: *** shutdown completed - server stopped ***
DpHalt: Good Bye .....
Thanks a lot,
Silke Brandt

Hi André,
how many WP will really use is not sure yet. Right now we are just testing the usage of those dynamic WP, since our main system is not upgraded yet.
On our productive system we have 9 application server with about 600 Users on each server. Additionally we have quite a lot of RFC-load coming in from outside, with tendency rising.
I try to explain a bit of our "problem":
We are a bank, therefore specially days like the first day of a new quarter or a new year is tricky. On those days the nightly processing might run into the morning and the rfc load is very high. On those days it would be very helpful to be able to have more WP available.
I am sure you - as a customer of a bank - would not be very happy if you wouldn't be able to use your online banking on those days, which could happen if not enough WP are available at peak time.
In addition to that, we think about reducing the number of our application servers to not only reduce administration overhead but also to get a better spreading of load on our DB2-Members and Host-Lpars. This is only possible if we are able to configure more than 100 WP per server.
I hope this gave you a little insight.
Greetings,
Silke

Upgradation of XI 3.0 to PI 7.1x

Dear All,
There is an XI 3.0 system which is to be upgraded to PI 7.1x.
There are two options available.
1. upgrade the XI 3.0 in-place to PI 7.1x
2. install a new PI 7.1x and then move the IR and ID objects to PI 7.1x
I would like to go for the most adequate option.
Please let me know the pros and cons on each options so that I can get a fair idea for selection?
regards,
Rana

Dear Rana,
Please fallow the below links:
Overview
This presentation summarizes the upgrade paths to SAP NetWeaver PI 7.1 and shows how you can upgrade from SAP NetWeaver Exchange Infrastructure 3.0 or SAP NetWeaver Exchange Infrastructure 7.0 to SAP NetWeaver PI 7.1.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8085e299-718c-2a10-de94-928f62b763ce
http://forums.sdn.sap.com/search.jspa?forumID=44&threadID=&q=upgradefrom3.0to7.1&objID=f44&dateRange=all&numResults=15&rankBy=10001
How To... Move Integration Scenarios (ESR/ID Objects) from PI 7.0 to PI 7.1
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90baf3dd-dbf9-2b10-47aa-ac5f56bb5030?quicklink=index&overridelayout=true
Thanks,
satya Kumar

SEM / BW upgrade advise required - Please help urgently

Hi,
We have migrated from a different company (January 2006) where they were using SEM -BPS and BCS. After the migration, we are not using SEM. Our BW version is 3.10. Our SAP R/3 version is 4.6C.
Now, We are planning to implement SEM- BCS. Our existing system component informations are as below.
SAP_BW - Release 3.10 (Support pack 22)
SEM_BW -Release 3.50 (Support pack17)
SAP_BASIS - Release 6.20 (Support pack 54)
SAP_ABA -Release 6.20 (Support pack 54)
PI_BASIS - 2004_1_620 (Support pack 10)
FINBASIS -200 (Support pack18)
BI_CONT - 330 (Support pack 17)
We have the following questions. Please advise.
1. Understood that the mainstream maintenance for BW 3.10 has ended on December 2006 ( The same for SAP_SEM: 3.50 also). So, If we upgrade to BW3.5 (Netweaver 2004), whether we will get the SEM 4.00 along with the upgrade so that we will have everything BW 3.5 and SEM 4.0 in a single box?
2. I am still seeing that the SEM_BW version 3.50 in the system component informations. Does that mean that we still have SEM components within BW 3.10? If yes, can we upgrade this to SEM 4.00 so that our BW system will get upgrade to BW 3.5?
3. Or what is the alternative, you suggest so that we will have SEM4.0
We are confused. Please advise at your earliest.
Please also send some links where we can compare the versions for BW/ SEM.
Thanks .
Message was edited by:
BW USA

Hi,
With BW 3.5 you'll need to upgrade SEM to SEM 4.0.
With 3.1 you'll have SEM components if you had installed SEM earlier. You can upgrade SEM separately in this case. Check the release notes to make sure that it dosen't require any upgrade or patch upgrades to your existing BW components.
For your BCS implementation, check what functionality you need, because most of the functionality that BCS projects use are available with BW 3.5 and SEM 4.0. So chances are that even f just upgrade SEM to ver 4.0 you might still have to upgrade your BW to ver 3.5 in order to utilize the full functionality.
You can search this forum for links on the upgrade and comparisions. Other good sources will be the release notes for upgrades on the SAP site.
Cheers,
Kedar

FIX_NW730.UPG file missing in 7.3 upgrade

Dear all,
EHPi has failed to locate the FIX_NW730.UPG file in the download dir. Any clues if this is a separate dwonload from SMP or otherwise.
Best regards

refer to sap note:
Note 1403832 - Central Note: Upgrade Systems on SAP NetWeaver 7.3

Minimum SP Level For BW 3.1 To Perform Upgrade To NW04s

Colleagues,
My customer is preparing for an upgrade to NetWeaver 2004s, and is trying to find out if there is a minimum Support Package Level for BW 3.1, in order to perform the upgrade. Does anybody know if there is a minimum SP Level they must be on (in BW 3.1) in order to be able to perform the upgrade?
Thank you in advance for any guidance you may be able to offer! -M

Hi Michael,
please check the installation / master guide in the SAP Service Marketplace (links can be find by searching this forum with the respective terms).
This shoul have the information needed.
In addition, you can check
<a href="http://service.sap.com/upgrad">SAP Service Marketplace /upgrade</a>
Cheers
SAP NetWeaver BI Organisation

EHP4 Upgrade in Solution Manager 7.1 system

Hi
i recently upgrade the Solution Manager system from 7 to 7.1.
Now i'm asked to upgrade the Ehp4 for Solution Manager 7.1 system. Couple of questions...is it possible to install Ehp4 (which is only available for ERC ECC 6) to the Sol Man 7.1 system?
I searched in market place to download the Ehp4 , but it is only available for 7.01...Which is the right media to be used....?
EHP4 FOR SAP ERP 6.0 / NW7.01
Product Availability, Maintenance Dates & Supported Platforms
Installation
based on SAP NetWeaver 7.01
based on SAP NetWeaver 7.3
Upgrade
based on SAP NetWeaver 7.01
based on SAP NetWeaver 7.3
regards
Chan

Hi,
EHP4 is only available for ECC systems. For more information on the product please review the below links
http://service.sap.com/erp-ehp
Regards,
Naveen.

Upgrade from 7.01 to 7.3 stopped in phase DETECT_START_RELEASE_COMPONENTS

Hello colleagues,
We are trying to upgrade our portal landscape (Netweaver 7.01 with EHP1) to 7.3.We are currently stopped in phase DETECT_START_RELEASE_COMPONENTS with the following error:
The execution of PREPARE/INIT/DETECT_START_RELEASE_COMPONENTS ended in error.
java.lang.NullPointerException: while trying to invoke the method com.sap.sdt.j2ee.model.DevelopmentComponentIF.getSoftwareType() of an object
loaded from local variable 'readComp'
java.lang.NullPointerException: while trying to invoke the method com.sap.sdt.j2ee.model.DevelopmentComponentIF.getSoftwareType() of an object
loaded from local variable 'readComp'
More information can be found in the log file /usr/sap/U3T/upg/java/log/DETECT_START_RELEASE_COMPONENTS_SRC_06.LOG.
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS not
es with the following search terms:
com.sap.sdt.j2ee.phases.PhaseTypeDetectComponents
com.sap.sdt.util.diag.JavaException
java.lang.NullPointerException: while trying to invoke the method com.sap.sdt.j2ee.model.DevelopmentComponentIF.getSoftwareType() of an object
loaded from local variable 'readComp'
DETECT_START_RELEASE_COMPONENTS
I
Any related issues about this?
Thanks a lot in advance and best regards,
Iñigo Gastearena

Hello,
I will paste the last lines:
Feb 3, 2012 1:02:01 PM :                                                         com.sap.sdt.j700.sduanalyzer.SDUAnalyzerImpl [Thread[main,5,main]]: Dependencies of component sap.com/SAP KM BS Database Content have been read. Dependencies are sap.com/com.sap.netweaver.bc.db.
Feb 3, 2012 1:02:01 PM :                                                         com.sap.sdt.j700.sduanalyzer.SDUAnalyzerImpl [Thread[main,5,main]]: File /usr/sap/U3T/JC80/SDM/root/origin/sap.com/SAP KM BS Database Content/SAP AG/0/6.20020.20070320155156.0000/com.sap.netweaver.bc.rf.manager.database.dbcontent.sda has been analyzed for deployment components.
Feb 3, 2012 1:02:01 PM :                                                         com.sap.sdt.j700.sduanalyzer.SDUAnalyzerImpl [Thread[main,5,main]]: File /usr/sap/U3T/JC80/SDM/root/origin/sap.com/tc/sec/diagtool/ear/MAIN_APPL63SP_D/0/20071119192056/web_diagtool.ear is a valid deployable file archive.
Feb 3, 2012 1:02:01 PM :                                                         com.sap.sdt.j700.sduanalyzer.SDUAnalyzerImpl [Thread[main,5,main]]: Basic component properties of SDU file /usr/sap/U3T/JC80/SDM/root/origin/sap.com/tc/sec/diagtool/ear/MAIN_APPL63SP_D/0/20071119192056/web_diagtool.ear have been read. Component name is sap.com/tc/sec/diagtool/ear and version is 0.
Feb 3, 2012 1:02:01 PM :                                                         com.sap.sdt.j700.sduanalyzer.SDUAnalyzerImpl [Thread[main,5,main]]: Dependencies of component sap.com/tc/sec/diagtool/ear have been read. Dependencies are .
Feb 3, 2012 1:02:01 PM :                                                         com.sap.sdt.j700.sduanalyzer.SDUAnalyzerImpl [Thread[main,5,main]]: File /usr/sap/U3T/JC80/SDM/root/origin/sap.com/tc/sec/diagtool/ear/MAIN_APPL63SP_D/0/20071119192056/web_diagtool.ear has been analyzed for deployment components.
Feb 3, 2012 1:02:01 PM :                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:891) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
Feb 3, 2012 1:02:01 PM :                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:892) [Thread[main,5,main]]: java.lang.NullPointerException: while trying to invoke the method com.sap.sdt.j2ee.model.DevelopmentComponentIF.getSoftwareType() of an object loaded from local variable 'readComp'
Feb 3, 2012 1:02:01 PM :                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:890) [Thread[main,5,main]]: java.lang.NullPointerException: while trying to invoke the method com.sap.sdt.j2ee.model.DevelopmentComponentIF.getSoftwareType() of an object loaded from local variable 'readComp'
Feb 3, 2012 1:02:01 PM :                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:925) [Thread[main,5,main]]: Phase PREPARE/INIT/DETECT_START_RELEASE_COMPONENTS has been completed.
Feb 3, 2012 1:02:01 PM :                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:926) [Thread[main,5,main]]: Start time: 2012/02/03 13:01:28.
Feb 3, 2012 1:02:01 PM :                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:928) [Thread[main,5,main]]: End time: 2012/02/03 13:02:01.
Feb 3, 2012 1:02:01 PM :                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:930) [Thread[main,5,main]]: Duration: 0:00:32.784.
Feb 3, 2012 1:02:01 PM :                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:931) [Thread[main,5,main]]: Phase status is aborted.
All the components seem to be valid as it is shown in the sdm log:
Feb 3, 2012 1:01:48 PM   Info: caf/eu/gp/croom/content: File metadata is /usr/sap/U3T/JC80/SDM/root//origin/sap.com/caf/eu/gp/croom/content/MAIN_NW701P03_C/1/2857536/MANIFEST.MF; /usr/sap/U3T/JC80/SDM/root//origin/sap.com/caf/eu/gp/croom/content/MAIN_NW701P03_C/1/2857536/SAP_MANIFEST.MF
Feb 3, 2012 1:01:48 PM   Info: caf/eu/gp/croom/content: full component: vendor: 'sap.com', name: 'caf/eu/gp/croom/content', scV: 'sap.com', scN: 'SAP-EU', location: 'MAIN_NW701P03_C', counter: '2857536', R: 'null', SP: 'null', PL: 'null', change number: '17'
Feb 3, 2012 1:01:48 PM   Info: caf/eu/gp/croom/content: updating system component version store...
Feb 3, 2012 1:01:48 PM   Info: Synchronization summary:
Feb 3, 2012 1:01:48 PM   Info:    Total updates: 1416
Feb 3, 2012 1:01:48 PM   Info:   Failed updates: 0
Feb 3, 2012 1:01:48 PM   Info: Succeded updates: 1416
Feb 3, 2012 1:01:48 PM   Info: End of synchronization with system component version store is successful.
F
Thanks a lot for your help,
Iñigo

Upgrading 4.7 to netweaver

Similar Messages

Maybe you are looking for