Upgrading 5th generation hard drive

Wondering if anyone can advise.
Was thinking of upgrading one of my 80G classics to a 160G by replacing the hard drive, as I don't intend to splash out on yet another ipod, but see this as a cheaper option for getting more memory. Then I wondered.
I have an old 30G 5th generation too, probably nearing the end of it's time, partly the reason why I don't use it so often. So is it possible to replace a 5th generation 30G hard drive with a 160G Classic hard drive as an upgrade, or are the systems incompatible? Can this only be replaced with a larger 5th generation hard drive?
Cheers for any help.

Hi Dylan,
I repair iPods for a living, so know what I'm talking about.
YES - it is difficult if you don't know what your doing. And it can be expensive - the hard drive is the most expensive part, after all. My company, www.dr-pod.com can complete this service for you, but if you want to try it yourself...
The Hard drive is different - You will need to buy a new one of these
The rear case is SMALLER - You will need one that says 160GB on or 30GB as these are the same size.
If I were you though, I would take the 30GB up to 80GB, as this is easiest to do. If you are not confident inside small electronics, then don't do it, enjoy your iPod and send it to a repair company like mine. If you are, then go for it, and let us know how you get on.
Thanks,
Mark Sweeney
Dr Pod Founder

Similar Messages

  • Installing a 5th internal hard drive

    What is the simplest way to install a 5th internal hard drive in a first generation Mac Pro? Is it a bad idea or does it work well? I don't want my Mac to get too hot etc.
    If it is not practical I will do it another way.

    Use something like this:
    http://www.transintl.com/store/category.cfm?category=2790.

  • What All Do I Need If I Want To Upgrade My Macbook Hard Drive?

    hey guys.
    i've tried reading up a little but i was hoping someone (or a few people) could give me some straight up answers.
    if i want to upgrade my macbook hard drive what all do i need? just the hard drive? or are there other pieces?
    also.. whats a good 250GB one? i found this one on ebay: http://cgi.ebay.com/NEW-2-5-Western-Digital-250GB-SATA-Harddrive_W0QQitemZ220271 134397QQihZ012QQcategoryZ158853QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
    is that one any good? i just know the name (Western Digital) and have heard good things about them...
    any comments are welcome.
    thanks!
    beau

    I got a 320GB sata 2.5" hard drive and installed it myself, its easy. I also got a caddy so I can use my old 120GB drive as a back up. Make sure u have everything backed up! Seagate and western digital drives are most popular. I asked similar q and got this answer"
    Extended Hard Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
    If your backup is bootable, then boot from the external drive and use SuperDuper to clone it back to the newly installed drive.
    Mac Pro 2.66 Ghz; MacBook Pro C2D 2.33 Ghz; MacBook Pro 2.16 Ghz Mac OS X (10.5.4) Intel iMac C2D 17 "; MacBook 2.0 Ghz.
    And
    Now, to install the hard drive, follow http://www.ifixit.com/Guide/Mac/MacBook-Core-Duo/Hard-Drive-Replacement/86/5/

  • I upgraded my imac hard drive to a 2tb drive. how do i use time machine to get my computer back to normal?

    i upgraded my imac hard drive to a 2tb drive. how do i use time machine to get my computer back to normal?

    Thank you. I followed the faq#14 (using setup wizard from the osx install disk). Everything went just as planned until I woke up this morning and noticed there was no progress on the "transferring documents" meter. It stopped about 1/4 of the way. I can hear the computer working and the bar is somewhat animated like it is advancing but it's not.
    Should I cancel and restart or should I wait it out? It already been about 13 hours since I started the process. Do you think it is my time machine or my iMac? Maybe the time machine file is corrupt or something.
    Anyway, any help is appreciated. Thanks.

  • 2011 Macbook Pro - if i upgrade ram and Hard drive will it void my applecare ?

    2011 13" Macbook Pro - if i upgrade ram and Hard drive will it void my 3 years of applecare ?  - Does apple offer this service ?
    Thanks

    However it might be worth reading this article in The Register about Apple not using standard temperature sensing methodology  - see
    http://www.theregister.co.uk/2011/05/14/imac_hard_drive_replacement_woes/http://
    also read the links to OWC comments.

  • How to upgrade my internal hard drive for macbook 5,2 from 160GB to 1TB?

    Hello,
    I wonder if you can please help me out.
    I wonder, is it possible to upgrade my internal hard drive for macbook 5,2 from 160GB to 1TB?
    Thanks,

    There's only one 9.5mm high 1tb drive around http://eshop.macsales.com/item/Samsung/HNM101MBB/
    With a video on replacing the hard drive http://eshop.macsales.com/installvideos/macbook_13_mem_hd/

  • About to upgrade my Macbook hard drive - what steps to ensure TM works?

    I'm about to upgrade my 100Gb hard drive in my Macbook to a 320Gb drive and I was planning to use either Carbon Copy Cloner or SuperDuper to clone my existing drive to my new drive.
    Couple of questions:-
    Will TM continue to work seamlessly or are there some tweaks I will need to do to get it to continue to work.
    With the increase in size of my Macbook drive I probably need to increase the size of my TM drive for backup as well - can I just clone my current TM drive to a larger capacity drive or will there be tweaks required.
    Many thanks
    Mike

    Mike,
    If you have a good Time Machine backup, you can just use that. You would install the new drive, boot to the Leopard install disk, then use the "Restore From a Time Machine Backup" utility. This restores your entire installation from the Time Machine backup of your choosing. Time Machine would then continue with the same backup where it left off.
    Kappy will not agree with this, because he has not had the same success as I with Time Machine. For me, it has worked flawlessly, and I have used the above method several times to go from one machine to another, or to a new drive on the same machine.
    I do recommend that you take a few precautions prior to trusting your Time Machine backup, however. First, I would verify the Time Machine volume with Disk Utility, to make sure there are no disk errors. Then, I would make a final backup and monitor it carefully. Open /Applications/Utilities/Console. In the Sidebar, under "Log Database Queries," select "All Messages." Then type "backupd" into the search field. Finally, choose "Backup Now" from the Time Machine menu.
    Watch the progress of the backup in the Console window, and look for the presence of any potential errors. If nothing seems out of the ordinary, your backup should be safe to use.
    Scott

  • My Mavericks upgrade crashed my hard drive and I had to reinstall Mountain Lion.  Now I cannot get any of the apps that I purchased to download.  The icons on the launchpad just say "waiting" no matter what I try.

    My Mavericks upgrade crashed my hard drive and I had to reinstall Mountain Lion.  Now I cannot get any of the apps that I purchased to download.  The icons on the launchpad just say "waiting" no matter what I try.  My app store ID is fine.  What do I do?

    Are you now using a different username from the one you used prior to migrating? If so that is the reason for the problem. You might, then, give this a try:
    To fix Home folder permissions
    Open the Terminal application in the Utilities folder.  At the command line prompt enter or paste the following command line:
    sudo chown -R `id -un`:`id -gn` ~
    Press RETURN.  You will be prompted to enter your admin password which will not be echoed.

  • I upgraded my macbookpro hard drive to 1 TB then migrated my files from time machine. I'm now locked out of the computer because the password is not the same as my usual one and one that was years old and not retreivable. How do I work around this?

    I upgraded my macbookpro hard drive to 1 TB then migrated my files from time machine. I'm now locked out of the computer because the password is not the same as my usual one and one that was years old and not retreivable. How do I work around this?

    Whether or not you are able to recover the data off the drive yourself will depend on if the drive suffered any impact damage in the crash. You can buy USB SATA or IDE adapters (Intel and almost all G5 use SATA) that will let you connect your hard drive to a computer (like a flash drive) to see if you can recover the data. If the drive has suffered physical damage if may not mount.
    If you know someone who has one of these adapters you could try using theirs, otherwise you could buy one but you take the risk of the data on the drive being non recoverable. Regardless, both are much cheaper than $1699!
    (Alternatively, if you know of someone with a Mac Pro or PowerMac G5 they may be able to install the drive in their machine and try to boot from or mount it and copy the data off.)

  • Can you upgrade a MacBookPro hard drive from a "750GB Serial ATA Drive @ 7200 rpm" to a Solid State Drive easily?  The info seems to say that it's as easy as plugging the new drive into a drive slot?

    I am about to buy a new MacBook Pro, but want to try out the Serial Drive 7200rpm before taking the plunge to use the SSD....Can you upgrade a MacBookPro hard drive from a "750GB Serial ATA Drive @ 7200 rpm" to a Solid State Drive easily?  The info seems to say that it's as easy as plugging the new drive into a drive slot?

    shldr2thewheel wrote:
    Fmaharg wrote:
    I am about to buy a new MacBook Pro, but want to try out the Serial Drive 7200rpm before taking the plunge to use the SSD....Can you upgrade a MacBookPro hard drive from a "750GB Serial ATA Drive @ 7200 rpm" to a Solid State Drive easily?
           Yes
    Fmaharg wrote:
    The info seems to say that it's as easy as plugging the new drive into a drive slot?
           It's easy, but not that easy.  You need to copy all the info from the drive currently in the mac to the new  one before you install the new SSD.  You can do          this by downloading cloning software (I use CarbonCopyCloner because it's free)
    Not to be picky but CCC is donationware, if you use it because of its quality you should send a little bit of money in appreciation, and as a bonus you get to turn the banner off.

  • Upgrading my PS4 hard drive

    Hi, I'm looking to upgrade my PS4 hard drive to a 2TB. I am looking for the cheapest deal possible and I was hoping you guys could help me out because I have no idea what type of hard drive will work and what won't. What should I be looking for in a hard drive? 

    Oran_Gina wrote:
    Trust-A-Zombie wrote:
    I upgraded to a 2TB yesterday. Was very worried as don't like doing things to do with changing in console components but when i found out Sony actually made the console and hard drive slot to be changed if you want I went ahead and did it. Bought this. 100% works. Took me 10-15 mins. Got everything installed back. Very simple process. http://www.amazon.co.uk/gp/product/B00I8O6OQ4?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00 Watch this step by step on what to do. https://www.youtube.com/watch?v=NLOSeGlY5oo  Just need USB Stick and a screwdriver. No need to go all technical like a lot of people will. Just buy that product in the link and follow the video. Simple That's all good, but for £20 less you get exactly the same hard drive. You just have to pop it out of a plastic case.  I guess if that's not something someone feels happy to do then by all means buy the stand alone drive.  We did mention it in the first couple of answers   I am in two minds to go for the portable HDD from Argos and crack it open or the M9 2TB from Amazon,it's the warranty I am more concened about.I have had the 1TB M9 installed in my PS3 for a few years and touch wood never had any problems,problem with cracking open the portable HDD it voids the warranty instantly so I am leaning more to the more expensive option.

  • [Solved] Upgrading my current hard drive

    Hey guys
    I'm having this MSI GE60-2OC which I find slow.
    Last time I was seeking some advices on what I should upgrade, and I was adviced to upgrade my current hard drive with a SSD instead. I was recommended to go with a mSATA SSD, which is perfectly fine - however, I got one question.
    Would it be a waste to get a mSATA SSD and then replace my current HDD with a SSD?
    If so, I'm planning to buy the Samsung SSD 840 EVO mSATA 120GB and a Samsung SSD 840 EVO 250GB.
    Is that possible? Would it be overkill?

    You'll need at least two mSATA to have RAID 0, so it's not supported on GE60 2OC.
    Just stick with the original BIOS you have and there is no additional settings needed in BIOS.
    For how to do the OS installation onto the SSD, you can check on the post Svet share before.
    http://dragonarmy.msi.com/forum/showthread.php?t=64052&p=101050#post101050
    Quote:
    "Burn and prepare MSI Recovery DVDs, then:
    Disconnect/remove your HDD, and leave the mSata SSD installed only.
    Then use the burned recovery DVDs to restore it over the SSD.
    Once you can boot your OS from the SSD and restore is complete,
    install again your HDD, and adjust boot prioroty 1st boot: SSD"
    How to adjust boot prioroty?
    1. After seeing MSI logo while booting up, press "Delete" button to enter the BIOS menu.
    2. Use keyboard to move to "Boot" tab.
    3. Set SSD to the Boot Option #1.
    *You need to change the Hard Disk Drive BBS Priorities if you can't find your SSD in the Hard Disk item.

  • Upgrading Mini Mac Hard Drive

    I have a mid '06 Mac Mini (1.66 MHz w/80 GB HD) and want to upgrade to the largest HD possible. When I bought it Apple did not offer an upgrade.
    Is this doable?
    Thanks!

    I just replaced the hard drive in my 2007 mini. I stayed with Hitachi since that is what Apple supplies with new machines. Hitachi has 2-1/2 inch SATA drives up to 750 GB in both 5400 rpm and 7200 rpm. Naturally the 7200 rpm models have higher transfer rates. The only issue I can think of with 7200 drives is higher heat generation.
    I just visited an apple store and checked out their new mini and found it has 7200 rpm Hitachi drives in the server version. I also spoke to Apple Care and Hitachi and both of them assured me 7200 rpm drives are fully compatible.
    Hitachi's web page for 2 1/2 inch TravelStar drives is
    http://www.hitachigst.com/internal-drives/mobile/
    You may note that Hitachi has Standard, Bulk Data Encryption (BDE) and Enhanced Access (EA) versions of their drives. Both the original drive in my mid 2007 mini and the drives in the new mini at the Apple Store were standard version models.
    The best price this weekend here in Chicagoland for the Hitachi 320 GB drive I bought (7200 rpm) was at MicroCenter. Hope this helps.

  • Time Capsule - OS Upgrade and External Hard Drive

    Hi, This is my first request and am happy to have found this community helpful so far. It has answered many of my previous questions because somebody else had already asked. However, this time I’m not able to get all the answers since I have specific questions. Please help.
    I have a Macbook (late 2008 Aluminum) with 2GB memory, Intel Core 2 Duo, 2 GHz running Leopard. I just went and bought these to start an upgrade project–
    a. CD for Snow Leopard
    b. Time Capsule
    c. 4 GB memory (2*2GB)
    d. 1 External Hard Drive – 1 TB Seagate GoFlex (running out of space in 160GB macbook)
    I will buy these applications via Mac App Store after I have the OS upgrade:
    e. iPhoto ‘11
    f. iMovie ‘11
    I have successfully connected time capsule and configured it as my router and have set it up as the time machine backup device (what a breeze!). Also, I have taken the first full backup of macbook and am ready to go. Before I go ahead with next steps, I have few questions:
    Should I install the new memory first and then Snow Leopard or doesn’t matter?
    Any advice for my memory upgrade? I found the instruction manual in Apple’s site and am planning to do it myself.
    Any advice for my Snow Leopard upgrade or anything to be cautious about? I believe the instructions after I pop in the CD will be self-explanatory.
    After I have done the Snow Leopard Upgrade, I believe I will still have access to my files in the time machine backup in TC from before the OS upgrade? The reason I ask is I am planning to delete/move files after the OS upgrade.
    FYI – After the Snow Leopard Upgrade, I will upgrade to iPhoto ’11 and iMovie ’11 from ’08. I have the latest iTunes.
    After I have Snow Leopard, iPhoto/iMovie ’11, I will connect the EHD to the TC USB port and am planning to move the iTunes Media and iMovie project/events to the EHD (found the instructions on this) and delete the media from the macbook internal drive to relieve space. Say, just in case my EHD crashes in the next 2 days after I do this, will I still be able to recover the previous media/project files from Time Capsule? Or do I need to copy the iTunes Media and iMovie project/events into the Time Capsule manually before I move it into EHD? Basically, I want to make sure I have 2 copies of my media, 1 in TC and 1 in EHD, since I am deleting it from mac’s IHD.
    Now say I have the EHD connected to TC via USB and have moved my all media and movie projects into the EHD. So macbook is accessing the EDH wirelessly, as the source for iTunes and iMovie media. For performance or portability, if I plug my EHD directly into the macbook, can it seamlessly recognize it as the media source for iTunes and iMovie or are there any settings involved? I am just wondering since via the TC it was a shared drive, and now it’s a plugged-in EHD.
    I know that Time Machine does incremental backups. Is there an explanation on this as to what is meant by hourly, daily and weekly backups and what are the copies made? I heard the hourly are replaced by daily backups and the daily are replaced by weekly, what does that mean?
    This may not impact me now, but may be soon. Is it true that once TC is full, time machine will delete copies of the oldest backup? My concern is that I want to somehow conserve today’s backup for good. Is that do able?
    Should I be concerned that time machine backs up every hour, since it may reduce my macbook’s performance during the backups? I know a way to reduce the backup frequency, am just trying to understand if it’s necessary to do so?
    How do I use my time capsule as an external hard drive? The reason is I have another PC from which I want to copy files and store in TC as a backup.
    I know I have many questions, but am hoping to get your expert advice. Thank you.

    Hello, seems like you wanted to do pretty much what i wanted to do. that is free up space on lap top. But still have instant access to your itunes stuff. I found a solution that works for me.
    I have a portable WD hdd attached to my time capsule via usb, i then access both through the capsules wireless connection, using the TC for time machine.
    The Apple tv then accesses my itunes lib through my MBP via TC's wireless. I did however connect the WD Hdd directly to my MBP for the initial transfer to the apple tv, but itunes seems to find the lib as long as its there, doesnt matter if its connected to MBPs usb or the TCs usb. Sometimes it might revert to the default location, but i've found that if you click on a song it still plays, then if you close then reopen itunes every thing goes back to your external hdd...
    Which means if you go away or want your itunes lib on the move you just need a little WD hdd.
    I'm not totally sure if its worked yet but i connected my WD hdd to my MBP vie usb and told the TC to back up that too by going to options in TM preferences, seems to have worked, not sure if it would work while connected to the TC usb connection, doesnt seem to.
    NB:Before you do this do a back up of everything in you Itunes Lib on your TC incase you screw up.
    (For easy transfer of your itunes lib go to preferences on itunes and create a folder called iTunes Music on your Hdd then close preferences and allow itunes to do its thing, then in itunes go to
    file - library - consolidate library, itunes. Itunes then makes a copy of all music on your new hdd. I then deleted the tunes off my MBP)
    Just make sure you open your finder and click on the TC to wake the drive before you open Itunes other wise you'll have to go in to preferences and keep altering the location for your itunes folder. which can take i tunes a while.
    This method seems to cope with video and music just fine.
    Well hope that wasn't too confusing, as i confuse myself at times.
    Good Luck.........

  • I want to upgrade my macmini hard drive?

    Hello,
    how can I know what kind of hard drive I can buy to upgrade my Macmini (late 2006) hard drive?

    You'll need a 2.5" serial ATA (SATA) hard drive. I like, and use, the Western Digital Scorpio Black, which has a 5 year warranty. A good source for choosing a drive is http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007605%2060000345 9&IsNodeId=1&name=SATA%203.0Gb%2fs as they have good prices, quick shipping, and many user comments.
    If you plan to change it yourself, there's a video at http://eshop.macsales.com/installvideos/mac_mini_06-08/ and step by step instructions at ifixit.com

Maybe you are looking for

  • Problem with HP color laserjet CP3505

    Hi all,  I am having a Problem with my printer CP3505, i fitted this printer in my network and it is printing perfectly good at first even from my Mobie (S4) and other systems in my network, but recently a problem  started its printing only from one 

  • The "Exception" field cannot be written

    When I try to enter a website as an exception (so the password I use for it will not be saved anymore), the field cannot be written. The only action I can do is to click on the "Close" button !

  • Where can I find an old BIOS version for X200

    Hi, I am running windows 7 build 7100 on an x200. After updating to BIOS Version 3.05 - 3.06 the system is significant slower. Where can I find the former BIOS version for download? In advance thx a lot for support.

  • Mail- always displays "downloading"

    imm using montain lion o s x and my mail recently just displays in the message "loading", ive done all the checks wrt passwords and connectivity can anyone offer any suggestions Thanks

  • Plan query for hierarhial queries inlude materialized views?

    I have this problem; I have a tree with more levels . In nodes of this tree I have a I have a measure . For leafs I have MV . What's happend with non-leaf nodes? Querying this measure for non-leafs nodes use MV from leafs? Thanks in advance, Aurel