Upgrading a DB to oracle 10g R2

Hi
I'd a orcle 10g R1 database connected to our application. I've upgraded this to 10gR2.
The oracle SID is orcl
During upgrade I chose to upgrade the DB and hence DB upgrade assistant is invoked and orcl is upgraded.
The database associated to my application in mgmtdb. After upgrading to oracle 10g R2, when I try to start this DB ..it wouldn't start and the log says the DB has to be upgraded.
The DBUA doesnot list this DB "mgmtdb". how do I go about upgrading this DB to the newer version ?
can anybody help me on this ?
thanks
Cinthuja

make sure you set your ORACLE_SID to 'mgmtdb' before starting the DBUA.
You upgraded 'orcl' which is default instance create by DBCA when you do oracle installation.
If you don't use that instance I suggest you remove it as it's wasting your server resources.

Similar Messages

Using DS 4.2 repo manager to upgrade a repository in oracle 10g?

Hello Experts,
The DS 4.2 PAM states that oracle 10g is no more supported as a local repository. I have a couple of DS 3.x local repositories on oracle 10g. Will the DS 4.2 repository manager allow to upgrade these 3.1 oracle 10g local repositories? i dont have a DS 4.2 environment so can't test it at my end , anyone out there whose been successful?

I didn't mean that, because i have not actually done it. According to their installation document you can configure with oracle 10g as well.
Check this - http://help.sap.com/businessobject/product_guides/sbods42/en/ds_42_install_win_en.pdf

Is it possible to upgrade only apache in oracle 10g application server.

Hi All,
I have to upgrade only apache in oracle 10g application server with out upgrading oracle 10g as.
Is it possibel to upgrade only apache version in oracle 10g application server. if yes.could you suggest the steps that i need to follow.
This is very urgent.
Thanks in advance.
Regards,
Sathya

If your trying to upgrade just apache in that oracle home, then no. If your trying to upgrade to a real apache version, from apache.org, mod_oc4j won't work. You need to use Oracle's version of Apache or HTTP Server.
Is there a reason you only want to upgrade Apache and not the whole oracle home?
There are ways to do it, but it wouldn't be supported by Oracle and I wouldn't recommend that either.
Edited by: user11993398 on Apr 13, 2011 3:04 PM

Regarding MOSD 454811.1 ( Upgrading OracleAS 10g Forms and Reports in Oracl

I Installed R12.1.1 and now upgrading it to 12.1.3. I am following document 1080973.1.
As per MOSD 1080973.1, We need to upgrade Upgrading to the Latest OracleAS 10g 10.1.3.x Patch Set in Oracle E-Business Suite Release 12.
Currently Version is 10.1.2.3 and in the document it's written that after applying all the patches, Chk that version should be 10.1.2.3
Do I really need 10G AS form & report upgradation ?

Hi..10.1.3.X is for IAS ORACLE HOME. I am asking about FORMS & REPORT HOMESorry, I got confused with your line --> "As per MOSD 1080973.1, We need to upgrade Upgrading to the Latest OracleAS 10g 10.1.3.x Patch Set in Oracle E-Business Suite Release 12. "
Currently Version is 10.1.2.3 and in the document it's written that after applying all the patches, Chk that version should be 10.1.2.3
Do I really need 10G AS form & report upgradation ?Yes, you need it. As mentioned in the doc "If customers are already on 10.1.2.3.0, follow instructions in Step 3.2 to apply the bundle patch.".
Thanks,
Hussein

Upgrade Oracle 10g RAC - Oracle 11g RAC on Linux Environment

We are planning to Upgrade our databases to Oracle 10g RAC - Oracle 11g RAC which is Linux Environment. Kindly suggest me the best option for migration. Our production database size is 80GB.
- Frest installation of oracle 11g using export/iimport dumps
- Migration
- Upgrade process
Any information regarding this will be appreciated.

Pl identify exact versions of "10g" and "11g", along with the exact OS versions.
Pl see the upgrade doc - http://docs.oracle.com/cd/E11882_01/server.112/e23633/toc.htm
HTH
Srini

Oracle upgrade from 32-bit Oracle 9i to 64-bit Oracle 10g (Windows 2003 R2)

Hello Gurus,
Existing I have SAP R/3 4.7 200 Oracle 9i Windows 2003 32bit
I want to upgrade Hardware to x86 EMT64bit
I would like to upgrade to 64-bit Oracle 10G from 32-bit Oracle 9i. runs on Windows 2003 32bit. Target DB is Oracle 10G on x64 Windows (EMT64 hardware) on Windwos 2003R2 64bit. & Add Solution manager to new System
Please give me any advise which is the better way of upgrading Oracle 10g. Or better yet, please advise a safe way of upgrading to Oracle 10g from 9i
Please guide me about request shipping DVD For This Solution to my site
Many thank in advance
Kuekul

Hi
You can download Oracle 10g from service market place www.service.sap.com>downlaods>Installations and Upgrades-->
Installations and Upgrades - Entry by Application Group>SAP NetWeaver>SAP NetWeaver7.0>Installation and upgrade>windows server-->oracle check for below software and download it
EXE 51031678_1 ORACLE RDBMS 10.2 Windows 1 of 5
RAR 51031678_2 ORACLE RDBMS 10.2 Windows 2 of 5
RAR 51031678_3 ORACLE RDBMS 10.2 Windows 3 of 5
RAR 51031678_4 ORACLE RDBMS 10.2 Windows 4 of 5
RAR 51031678_5 ORACLE RDBMS 10.2 Windows 5 of 5
ZIP 51033272 ORACLE 10.2 Client
ZIP 51036971_2 ORACLE RDBMS Patch 10.2.0.4 Windows Server on IA32 32bit
ZIP 51036971_3 ORACLE RDBMS Patch 10.2.0.4 Windows Server on IA64 64bit
ZIP 51036971_4 ORACLE RDBMS Patch 10.2.0.4 Windows Server on x64 64bit
Regards
Uday

Oracle 10g Release 2 (10.2) for Linux x86-64

Hi All,
During installation - Oracle Database Configuration Assistance, I have got below error and thus I stuck. As per Metalink note 293988.1, this will be resolved if I do [root@localhos]# echo 1 > /proc/sys/vm/disable_cap_mlock . But problem is when I do this because I dont have /proc/sys/vm/disable_cap_mlock file in my system, it giving ¨bash: /proc/sys/vm/disable_cap_mlock: No such file or directory¨ error. So I am unable to get rid of this error. I also set SELinux Default and Current mode as permissible and rebooted it.
No use, Its giving same error.
ORA-27125: Unable to create shared memory segment.
DB Details_
Oracle 10g Release 2 (10.2) for Linux x86-64
Choosen Basic Installation
OS Details:_
*[root@localhost vm]# uname -rm*
2.6.32-100.0.19.el5 x86_64
*[root@localhost vm]# uname -a*
Linux localhost.localdomain 2.6.32-100.0.19.el5 #1 SMP Fri Sep 17 17:51:41 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
*[root@localhost etc]# cat /etc/redhat-release*
Red Hat Enterprise Linux Server release 5.5 (Tikanga)
*[root@localhost etc]# make -v*
GNU Make 3.81
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
This program built for x86_64-redhat-linux-gnu
This is bugging me since last two days. Any help would be appreciated.
Thanks in advance.
Regards,
Mahi

Trust me I verified installtion guide and release notes atleast 20 times. I never had luck witht any thing. I was wondering how come edelivery.oracle.com packages (both Linux 64 bit Linux with upgrade to Unbreakable and Oracle 10g db version) is not workign for me. Finally below trick to the installed file could make my installation work(Ref link http://www.oracle-base.com/articles/10g/OracleDB10gInstallationOnFedora2.php) . In this I am setting DISABLE_HUGETLBFS to value 1. My only doubt is, does this have any impact on performance? Can some one relay on such tweeking for prod installtions? Ofcourse I am yet to go for commercial. At present I dont have ULN or metalink authorised access.
cd $ORACLE_HOME/bin
mv oracle oracle.bin
cat >oracle <<"EOF"
#!/bin/bash
export DISABLE_HUGETLBFS=1
exec $ORACLE_HOME/bin/oracle.bin $@
EOF
chmod +x oracle
Edited by: TechMahi.com on Nov 7, 2010 10:15 PM

URGENT- Apply OracleAS 10g Release 3 (10.1.3.0) Patch Set 5 (10.1.3.5.0)

Hi friend;
I had one urgent issue. I am following Upgrading to the Latest OracleAS 10g 10.1.3.x Patch Set in Oracle E-Business Suite Release 12 [ID 454811.1]
I had one issue and i restart to installation but on OUI screen i have,
There are no patches that need to applied from the patchsert Oracle application Server Patchset 10.1.3.5
I dont have oraInventory and i followed :
How to Create a Clean oraInventory in Release 12 [ID 834894.1]
My oraInventory which i created its shows:
inventory_loc=/etc/oraInventory
inst_group=dba
Any one has idea?
Regard
Helios
Edited by: Helios- Gunes EROL on Jul 13, 2010 5:57 PM

You say you have 10.1.3.0 and your message says "There are no patches that need to applied from the patchset Oracle application Server Patchset *10.2.3.5*"
You can't patch 10.1.2 with a 10.1.3.
are you sure you have the appropriated patch?

Combination: oracle 9i server with Oracle 10g client??

Hello, we are running R/3 4.6C on Windows cluster system (node1-DB instance and node2-Central instance) and on Oracle 9i server. We also have several dialog instances running Oracle client 9i. Hardware and software (sap, oracle, windows) - everything is 32bit.
We are replacing those several old application servers (=dialog instances) with new X86_64 hardware and Windows 64 bit + Oracle client 64 bit. The question is: is it possible (and also supported) to install Oracle client 10g 64bit on new application servers? We are not planning to upgrade DB server to Oracle 10g yet!! So, can we run DB server on oracle 9i 32bit and oracle client 10g 64bit on applicaton servers??
Thank you very much!
Best regards, Igor

Hello,
To Andreas:
A little puntualization:
the oracle client software version depends on the sap version and not on the oracle server version...as far as i remember, oracle client 10 is either supported for sap kernel 7.00 or the brtools 7.00, which means that you cannot use oracle client 10 with sap kernel 46D_EXT
This is correct for <i>UNIX</i> systems, not for windows.
On windows the client to be used is the same version as the RDBMS.
I think this also answers Igor question.
If you RDBMS software is 9i then you have to use the client 9i

Oracle 10g to 11g Upgrade - Oracle Clusterware problem

Oracle10g RAC (2 Nodes) RHEL 4 64bit
Hi All,
I have began the procedure for upgrading Oracle Clusterware to 11g. However, during the install OUI was giving me certain error messages like it couldn't transfer the OUI installlogs to node 2. Well, I kept pushing through the install and after I ran the last rootupgrade script on node 2 it gave me the following error:
Checking the existence of nodeapps on this node
Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/ops/opsctl/OPSCTLDriver (Unsupported major.minor version 49.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
Creating '/crs/home/install/paramfile.crs' with data used for CRS configuration
Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/ops/opsctl/OPSCTLDriver (Unsupported major.minor version 49.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
Failed to retrieve VIP details
Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/ops/opsctl/OPSCTLDriver (Unsupported major.minor version 49.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
Failed to retrieve VIP details
Setting CRS configuration values in /crs/home/install/paramfile.crs
So I ignored the error for the time being and after that I checked the status of crs and it gave me the following:
[oracle@vtl-rac2 crsd]$ crsstatus
HA Resource Target State
ora.VMRACDEV.VMRACDEV1.inst ONLINE ONLINE on vtl-rac1
ora.VMRACDEV.VMRACDEV2.inst ONLINE ONLINE on vtl-rac2
ora.VMRACDEV.db ONLINE ONLINE on vtl-rac1
ora.vtl-rac1.ASM1.asm ONLINE ONLINE on vtl-rac1
ora.vtl-rac1.LISTENER_VTL-RAC1.lsnr ONLINE ONLINE on vtl-rac1
ora.vtl-rac1.gsd ONLINE ONLINE on vtl-rac1
ora.vtl-rac1.ons ONLINE OFFLINE
ora.vtl-rac1.vip ONLINE ONLINE on vtl-rac1
ora.vtl-rac2.ASM2.asm ONLINE ONLINE on vtl-rac2
ora.vtl-rac2.LISTENER_VTL-RAC2.lsnr ONLINE ONLINE on vtl-rac2
ora.vtl-rac2.gsd ONLINE ONLINE on vtl-rac2
ora.vtl-rac2.ons ONLINE OFFLINE
ora.vtl-rac2.vip ONLINE ONLINE on vtl-rac2
So i tried to bring it back up by doing a crs_stop -all and crs_start -all and it gave me the following error:
vtl-rac1 : CRS-1019: Resource ora.vtl-rac2.ons (application) cannot run on vtl-rac1
Start of `ora.vtl-rac1.ons` on member `vtl-rac1` failed.
vtl-rac2 : CRS-1019: Resource ora.vtl-rac1.ons (application) cannot run on vtl-rac2
CRS-0223: Resource 'ora.VMRACDEV.db' has placement error.
CRS-0215: Could not start resource 'ora.vtl-rac1.ons'.
CRS-0215: Could not start resource 'ora.vtl-rac2.ons'.
I am thinking that all of this is caused by the various issues I had with the install. If I am incorrect, then please let me know. If it is true, I would like to know if there are any 11g docs on how to clean up a failed clusterware upgrade. Any advice would be greatly appreciated on any of the situations I am having.
Thank you

Hi Chandra,
Did CVU report any problems before the upgrade?No, there were no errors reported by CVU before the upgrade.
I don't there is note out there for cleaning 11g CRS
install...and I think can very use the 10g CRS note -
239998.1.Yeah I might have to go that way.
I have both the 11g CRS install and upgrade from 10g
to 11CRS at
http://chandradba.blogspot.com/2007/08/oracle-11g-rac-
install-on-red-hat-50.html
and
http://chandradba.blogspot.com/2008/02/oracle-10g-crs-
upgrade-to-11g-crs.html
see if it helps.Yup, your guide is very simple, clear and error proof :) That's how mine when pretty much except right around 75% I started getting these strange errors of files not being able to be transferred to node 2. Anyways, it shouldn't be a problem as none of those errors were configuration related...or else I would have a messed up cluster.
Well, I actually rebooted both machines and now the whole CRS stack is up!! So I guess I am ok. We'll just have to wait and see.
Thanks for your help Chandra...I always appreciate it.

Upgrading IMP/EXP utility in ORACLE 10g

Hi,
I have installed Oracle 10g 10.2 Enterprise edition.Can I upgrade the the version of the EXP/IMP utility od my oracle so that i can import dump files which are exported from Oracle 11g 11.2 version.
Thanks in advance,
Anindya

user13006709 wrote:
Hi,
I have installed Oracle 10g 10.2 Enterprise edition.Can I upgrade the the version of the EXP/IMP utility od my oracle so that i can import dump files which are exported from Oracle 11g 11.2 version.
Thanks in advance,
Anindya
No, you must use the imp utility from target database which is 10g.
Cheers

Upgrade Oracle 10g 10.2.0.2 to 10.2.0.4

Hi,
Is there anybody there, who upgrades Oracle 10g 10.2.0.2 to 10.2.0.4.
May I know where did you download and how you did it as I check the SAP Note 1137346, there is before and after upgrade but nothing about the upgrade process and I can't file the upgrade file as well.
Thanks for the help
P.S.: Our OS is Windows 2003 and we are running NW2004s , EP7.

Hello,
not sure exactly what do you want.
Is there anybody there, who upgrades Oracle 10g 10.2.0.2 to 10.2.0.4.
Yes, me, for example
May I know where did you download and how you did it.
SAP Service Marketplace
http://service.sap.com/oracle-download
-> Oracle 10.2.0.4 -> Database RDBMS -> Your OS
Note that still is not available for Itanium (MS Windows Itanium (64-bit))
The instructions to install any patch set can be found on the patch ser (README file)
you can also take a look at the note 839187 Oracle Database 10g: Patch set installation

Oracle 10g RAC to 11g RAC Upgrade on Solaris

Hi,
We are planning to do a migration of a 4 Node Oracle 10g RAC on Solaris 9 to 11g with Solaris 10. We'd like know what would be the best path to take. We cannot afford any downtime!
Options: Are these feasible? Which option is best? Any documents links?
a) Do a rolling upgrade of Oracle from 10g to 11g. Then take down individual nodes and upgrade the Solaris OS from 9 to 10 and bring them up back into the cluster. Is there any known issues taking this path? Is a rolling upgrade like this possible?
b) Do an upgrade of the Solaris OS from 9 to 10 on each node and then bring them back up? Is this practical? Does Oracle allow different versions of OS running on different nodes?
c) Use Dataguard with 2 different RAC environments (2 nodes each). How would this work? Is it the only possible way? Any steps please?
Thanks

a) Do a rolling upgrade of Oracle from 10g to 11g. Then take down individual nodes and upgrade the Solaris OS from 9 to 10 and bring them up back into the cluster. Is there any known issues taking this path? Is a rolling upgrade like this possible?Hi,
first of all i would not change several components (OS, database version) at a time. My recommendation is to make small steps and start with the operating system first. Seconds recommendation is to test and test everything in your dev or test environment prior doing the upgrades in the productive environment. Trust me: You will face problems :-) So you better try it beforehand!
b) Do an upgrade of the Solaris OS from 9 to 10 on each node and then bring them back up? Is this practical? Does Oracle allow different versions of OS running on different nodes?As far i know you can run different operating system versions on different nodes if they are supported (Solaris 9 and 10 are).
Ronny Egner
My blog: http://ronnyegner.wordpress.com

Can not upgrade oracle 10g express edition 10.2.0.1 to 10.2.0.4

I have install oracle 10g express edition 10.2.0.1 for windows 2003
now I want upgrade to 10.2.0.4,I download p6810189(10.2.0.4 patch)
When I upgrade 10.2.0.4 at OUI,have 2 option I don't know how to fill
Specify File Locations
1.Name:
2.Patch:
my oracle was installed at c:\oraclexe
oracle Home:C:\oraclexe\app\oracle\product\10.2.0\server
oracle BASE:C:\oraclexe\
oracle home_name:XE
oracle sid:XE

Hello,
Oracle 10g XE is rather specific and, I'm not sure that you can upgrade it to 10.2.0.4 .
However, Oracle published an Upgrade Guide for Oracle Express Edition but, it's limited to *10.2.0.3*:
http://download.oracle.com/docs/cd/B25329_01/doc/server.102/b32391/toc.htm
But be careful:
Once you have upgraded to Oracle Database 10g, you cannot downgrade back to Oracle Database Express Edition.Hope this help.
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on May 22, 2010 12:06 AM

After upgradation from Oracle 9i to Oracle 10g,one proc is throwing error

recently upgraded from Oracle 9i to Oracle 10g. We have some Oracle procedures which are not working in Oracle 10g.
A section of code from one of the procedures looks somewhat like the code below:
Declare
Cursor c_matched_records (…..) is
Select a.field 1, b.field2
From table1 a, table2 b
Where a.field3=b.field1
FOR UPDATE;
BEGIN
For records in c_matched_records
LOOP
-- Continue processing
-- Update records
COMMIT;
END LOOP;
END;This section of the code throws out the following error in Oracle 10g
ORA-01002: fetch out of sequence during PUT outputFile file
However this code was working fine in Oracle 9i.
please help me with this?
Thanks

I believe you are lucky that the pl/sql is okay in Oracle 9i. How about remove the commit statement? Why do you need it in the loop. I look up metalink. You may refer to article ID 257914.1

Upgrading a DB to oracle 10g R2

Similar Messages

Maybe you are looking for