Upgrading ASA from command line

I've upload a new flash image to my ASA and can see it when doing a "Sh Flash" command.
However, we rebooting it is not used. What is the proper procedure to get it to use an image file?
Would I use...
boot system flash:/asa722-k8.bin
We are currently using 7.02 (disk0:/asa702-k8.bin)

The issue is due to the boot option that you have mentioned in the ASA. This boot option determines the boot image when the ASA boots.

Similar Messages

How to send report output to two detinations at a time from command line?

Hi ,
how to send my report to two detinations at a time from command line i.e FILE and Mail ?
i created batchfile in that i mentioned one line for file(DESTYPE=FILE) perpose and another line for mail perpose(DESTYPE=Mail).i don't want to mention to lines.
i want to send my report out put two destinations at a time insted of running two times.
thx in advance.....
raghu

hello,
did you try to use distribution for that ? check out the reports distribution facilities available in 6i.
regards,
the oracle reports team

Error while running a Discoverer Workbook with parameter from command line

I am trying to run a discoverer report from command line and export the results in xls on to my local machine. I could do it fine for a simple workbook, but if I add a parameter(madatory) to the workbook and run it from command line specifying the parameter value I wanted to run the report for, I do not get any results. Here is the command line I am using.
dis51usr.exe /connect user/password@database /apps_user /apps_responsibility "System Administrator" /eul EUL_US /open C:\Disco\Test.DIS /sheet Testsheet /parameter Period Jan-07 /export xls C:\Disco\X.xls /batch
Parameter value is entered in correct format(Jan-07).
When I removed /batch from this to see if I get any error, Discoverer Desktop opened up, logged in and gets terminated saying 'Oracle Discoverer Desktop has encountered a problem and need to close. We are sorry for the inconvenience.'
Did anybody come across this issue before?

Hello,
If you have a few minutes, Windows is also aborting for me:
the differences are, my situation is:
a) am running the command line from a .bat file
b) am NOT running with parms, want the discoverer query to come up for the user
c) am running a query from the database
i am signing in as myself BUT running a query that was created by a generic user called SREG
c) if i run the .bat file from Windows Explorer, the query opens fine
d) if i execute the .bat file from within Microsoft Access using the shell command,
the query opens and then aborts RIGHT BEFORE the parm screen would display
e) btw, if i modify the .bat file, to run a query from MY database signon, then (d) - running .bat file
from vb using SHELL command works
Do you have a ideas as to why (d) does not work? I would be very grateful for your time, tx, sandra
this is what i posted yesterday, tx: Re: Running Discoverer command line
tx, sandra

VPN Client disconnection from command line

Hi,
I want to connect to IPsec VPN on ISA500 by VPN Client (v 5.0.07.0440, the last version, I think), using command line parameters.
I can connect with the command:
"%programfiles%\Cisco Systems\VPN Client\ipsecdialer.exe" -c -user myUser -pwd myPassword "MyConnectionEntry"
but i don't know the command to disconnect from command lines.
If I do
"%programfiles%\Cisco Systems\VPN Client\ipsecdialer.exe" -?
I obtain the list of parameters
vpngui [-c | -sc [sd] [-user <username>] [-pwd <password> ! -eraseuserpwd]] <connection entry>
but I don't unterstand what I have to do... I try every combination using -sd parameter (I think means for silent disconnect), but in every case I can only to show VPN interface without disconnect anything...
Can anyone help me?
Thanks

Prasath,
This appears to be a data flow issue. You need to look in the dataflow log file. Your information indicates the project name is SAMPLES.xml, and the data flow ID is D20091213_014350765. Look at the data flow log file in
C:\dqxi\11_7\repository\configuration_rules\runtme_metadata\project_SAMPLES\D20091213_014350765
Alternatively, you can temporarily replace the transactional reader and writter transforms with their corresonding batch transforms, and run the job from the Project Architect. Any errors will be displayed in the Running window.
Paul

I can not uninstall Office 2013 from command line

Hi, I have been stuck for a while trying to uninstall Office 2013 via command line. Installation file was downloaded from Volume Licensing Service Center, Uninstall.xml file for silent uninstallation looks like this:
<Configuration Product=”ProPlus”>
<Display Level=”basic” CompletionNotice=”yes” SuppressModal=”yes” AcceptEula=”yes” />
</Configuration>
From command line the following will not work:
setup /uninstall ProPlus /config .\ProPlus.ww\Uninstall.xml
Error: Setup can not find or validate an installation file. Please try reinstalling Office . . .
setup /uninstall ProPlus gives me GUI to continue process - it seems /config .\ProPlus.ww\Uninstall.xml part does not work as it should be
This is very important to me since I used above command line in SCCM 2012 R2 to allow user to uninstall Office 2013 by itself via Software Center. When this failed I tried locally but the error was the same. This should have been trivial task - silent uninstallation
using .xml file. It is not a rocket science. I am very angry because losing time for something like this is unacceptable for system engineers working with SCCM 2012 R2.

Hi,
This error might occurs due to lots of reasons. Where is the installation file stored? If it's stored on a network share, please copy it to your local disk, and then manually run the command again. This way, we'll see if the installation file is the
problem.
If issue persists in this case, then this generally means that something wrong with the installation file. Please try to redownload it and then try again.
Please also make sure that you're executing the command with elevated privileges (run as administrator).
Regards,
Ethan Hua
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

How to delete more than one workbook from command line

Hi, I'd like to delete more than one workbook from command line:
The following syntax, it doesn't work....but I followed the manual instructions:
dis51adm.exe /connect eul/eul@uatdb /delete /workbook "ALE_TEST_1, ALE_TEST_2" /eul eul /log D:\Ale\delete.log
where:
eul/eul@uatdb: is the db’s schema/user where the EUL is installed;
/delete "ALE_TEST_1, ALE_TEST_2": is the command to delete the workbooks, specified inside the “” (with the relative path)
/log D:\Ale\delete.log: is the command to write a log’s file named “delete.log” to track the action
The log file says:
22/4/2008 4:00:26 μμ
dis51adm.exe /connect /delete /workbook ALE_TEST_1, ALE_TEST_2 /eul eul /log D:\Ale\delete.log
Document ALE_TEST_1, ALE_TEST_2 not found in EUL.
Internal EUL Error: ObjectNotFound - Can't find EUL element
There are 0 eul elements to be deleted.
Completed deleting eul elements.
22/4/2008 4:00:29 μμ
Anyone can tell me how is the right syntax ?
Thanks in advance
Alex

Hi Rod
I was coming to that conclusion myself but wanted to wait until the other avenues had been exhausted first - aka making sure of the workbook names.
I checked through all of the command line documentation and read nothing which clearly indicated that only one workbook could be processed at a time, other than the fact that the syntax says workbook and not workbooks, which could be a big clue.
I think you are right though in that it has to be one at a time, which would be a pain.
Best wishes
Michael

How to run a 10g report from command line ?

Good Afternoon,
Please advise if there is a way to run a 10g report from command line.
We use 6i right now and our job scheduler runs reports using "D:\ORADEV6I\BIN\RWRUN60.EXE ..." executable in batch mode on a separate server. We plan to migrate to 10g Database, Forms, Reports. Is there a way to keep this functionality and create a "command" to address an report server and run a report?
Thank you,
Dmitri

Steps to take.
(1.) In command prompt type RWSERVER SERVER=repserver1 to star the rep server.
(2.) If you get "Javaw.exe The procedure entry point psoasyn could not be located in the dynamic link library orapls10.dll." error do one of the following
        (a.) Type the full name for the server. D:\OracleDevR2\bin\rwserver SERVER=repserver1
               or, if it does not work
        (b.) Add D:\OracleDevR2\bin to the system env. variable PATH
(3.) Start OC4j
(4.) Now you can access the jobs using URL like:
    http://192.161.11.143:8890/reports/rwservlet/showjobs?server=repserver1
      where 192.161.11.143 is your machine's IP address.

To run a report from command line, when using jdbc-odbc bridge

Hi,
How to run a report from command line, when using jdbc-odbc bridge?
Usually with tns, we do by "rwrun module=<> userid=<user>/<passwd>@tns".
with odbc, we do by "rwrun module=<> userid=<user>/<passwd>@odbc:DSN"
Please specify, what is command line arguments for jdbc-odbc bridge driver?
Environment : Oracle 9i Report Builder on WinNT
Database : Sybase
Regards,
Ramanan

Hello Ramanan,
Report Builder : connect JDBC Query in Report Builder is to through Connection Dialog in JDBC Query Editor. User can use a Sign on parameter (can use, default : P_JDBCPDS or can create new) to connect to JDBC Data Source. Connection once made will be mentioned and will be reused through out Reports Builder.
JDBC PDS allows user to connect one or more same or different kind of databases.
While running report through runtime or Server, user can pass the sign on parameter(connection string) value, like any other user parameter.
Syntax for connection string : <username>/<password>@databaseURL . The syntax of database part of connection string depend on the type of JDBC Driver used to connect to Data Source while designing the JDBC Query. databaseURL refer to the location of the database and its format depend on the JDBCPDS river selected in design time while creating the JDBC Query.
rwrun eg :
rwrun report=jdbc_odbc.rdf destype=file desname=output.html desformat=html P_JDBCPDS=scott/tiger@database
Server eg :
http://server.com:8888/servlet/RWServlet?server=MyReportServer+report=jdbc_odbc.rdf+destype=cache+desformat=html+P_JDBCPDS=scott/tiger@database
http :
Please see ORACLE_HOME/reports/conf/jdbcpds.conf for more information.
With Regards
Reports Team

Error while running ADF-BC Test Suite from command line

Hi,
I have created a separate test project containing the Test Suite for the Model componenet of my ADF-BC application.
I need to run this test project separately from jmeter.
The tests run fine from Jdev, But when I package the test project into a jar and try to run from command line, I get the following error:
java.lang.NoClassDefFoundError: oracle/jbo/ApplicationModule
        at com.oracle.cs.cap.module.applicationModule.ServiceAMFixture.<init>(ServiceAMFixture.java:36)
        at com.oracle.cs.cap.module.applicationModule.ServiceAMFixture.<clinit>(ServiceAMFixture.java:15)
        at com.oracle.cs.cap.module.view.EntitlementReportDurationViewVO.EntitlementReportDurationViewVOTest.<init>(EntitlementReportDurationViewVOTest.java:11)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
        at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
        at java.lang.reflect.Constructor.newInstance(Unknown Source)
        at org.junit.internal.runners.JUnit4ClassRunner.createTest(JUnit4ClassRunner.java:72)
        at org.junit.internal.runners.JUnit4ClassRunner.invokeTestMethod(JUnit4ClassRunner.java:79)
        at org.junit.internal.runners.JUnit4ClassRunner.runMethods(JUnit4ClassRunner.java:51)
        at org.junit.internal.runners.JUnit4ClassRunner$1.run(JUnit4ClassRunner.java:44)
        at org.junit.internal.runners.ClassRoadie.runUnprotected(ClassRoadie.java:27)
        at org.junit.internal.runners.ClassRoadie.runProtected(ClassRoadie.java:37)
        at org.junit.internal.runners.JUnit4ClassRunner.run(JUnit4ClassRunner.java:42)
        at org.junit.internal.runners.CompositeRunner.runChildren(CompositeRunner.java:33)
        at org.junit.runners.Suite.access$000(Suite.java:26)
        at org.junit.runners.Suite$1.run(Suite.java:93)
        at org.junit.internal.runners.ClassRoadie.runUnprotected(ClassRoadie.java:27)
        at org.junit.internal.runners.ClassRoadie.runProtected(ClassRoadie.java:37)
        at org.junit.runners.Suite.run(Suite.java:91)
        at org.junit.internal.runners.CompositeRunner.runChildren(CompositeRunner.java:33)
        at org.junit.internal.runners.CompositeRunner.run(CompositeRunner.java:28)
        at org.junit.runner.JUnitCore.run(JUnitCore.java:130)
        at org.junit.runner.JUnitCore.run(JUnitCore.java:109)
        at org.junit.runner.JUnitCore.run(JUnitCore.java:100)
        at org.junit.runner.JUnitCore.runMain(JUnitCore.java:81)
        at org.junit.runner.JUnitCore.main(JUnitCore.java:44)
Caused by: java.lang.ClassNotFoundException: oracle.jbo.ApplicationModule
        at java.net.URLClassLoader$1.run(Unknown Source)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(Unknown Source)
        at java.lang.ClassLoader.loadClass(Unknown Source)
        at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
        at java.lang.ClassLoader.loadClass(Unknown Source)
        ... 27 more
The Test project jar is created as ADF Library JAR File with Model.jpr as the dependent project. This takes care of project class dependencies
All the adf library dependencies are added to the manifest file of the Test Project jar referring to a location lib/ in the jar file directory.
I tried creating the ApplicationModule using both Configuration class (Configuration.createRootApplicationModule) as well as using the JDBC Connection String but both fail when I run the test cases independently from jmeter.
Anybody came across such an error? Please help.
Thanks,
Sapna

Hi Timo,
Im using JDev version 11.1.1.6.0.
I checked the class path on the jdev console. All the library references are mentioned in the manifest.mf classpath of the test project like below:
Manifest-Version: 1.0
Class-Path: lib/identitystore.jar
lib/adfm.jar
lib/groovy-all-1.6.3.jar
lib/adftransactionsdt.jar
lib/adf-dt-at-rt.jar
lib/adfdt_common.jar
lib/adflibrary.jar
lib/xmlparserv2.jar
lib/db-ca.jar
lib/jdev-cm.jar
lib/ojmisc.jar
lib/commons-el.jar
lib/jsp-el-api.jar
etc...
So I expect the library references should be resolved looking at the manifest file.
Another set of entries that I see in the jdev classpath are related to the Model project which is under test.
-classpath
D:\CurrentProject_1\16_7_2013_3pm\11_7_2013\.adf;
D:\CurrentProject_1\16_7_2013_3pm\11_7_2013\Model\classes;
How do I put these entries into my class path? Will it be sufficient if I add the Model.jar into my test project classpath?
Thanks,
Sapna

Running FlexUnit tests from command line

Sorry if that has been posted before: I searched best I could and nothing came up.
I am interested in building and running my unit tests from the command line so we can add it to a nightly build process.
I am *very* new to all this: basically I picked up Adobe Flash Builder 4 a month ago and I have done *everything* inside that IDE: writing code, building, testing, running.
I looked into at least how to build something from the command line, I found this:
http://help.adobe.com/en_US/flashbuilder/using/WSbde04e3d3e6474c4-59108b2e1215eb9d5e4-8000 .html
Can't get past this error:
Buildfile: /Users/dbanks/build_test.xml
BUILD FAILED
Target "FlexUnitApplication" does not exist in the project "null".
Total time: 0 seconds
Adobe Flash Builder 4:
An error has occurred. See the log file
/Users/dbanks/Documents/Adobe Flash Builder 4/.metadata/.log.
Plus, even if I got this going, I am just building the swf. I also want to run it and capture the output in some meaningful way that can be read/evaluated/acted on.
FWIW, the script/xml I am using to try to build:
build_test.xml:
<?xml version="1.0"?>
<project default="main">
    <target name="main">
        <fb.exportReleaseBuild project="NightclubMogul" />
    </target>
</project>
execute_build_test.sh:
WORKSPACE="$HOME/Documents/AdobeFlashBuilder4"
# works with either FlashBuilder.app or Eclipse.app
"/Applications/AdobeFlashBuilder4" \
    --launcher.suppressErrors   \
    -noSplash   \
    -application org.eclipse.ant.core.antRunner   \
    -data "$WORKSPACE"    \
    -file "/Users/dbanks/build_test.xml" FlexUnitApplication
I am not clear what in here is actually supposed to point to where my project lives: it's off in some directory somewhere. I see that I am pointing to a workspace (Documents/AdobeFlashBuilder4) but when I poke around in there I don't see anything connecting back to the directories where the code lives.
Any help would be great: getting the tests to build from command line, then getting them to run.

C:\>sqlplus @myscript
That would be the easiest variation
C:\>sqlplus user/passwd@tns_alias @myscript
would be an often used variation
And then there is of course the version with parameter passing:
C:\>sqlplus user/passwd@tns_alias @myscript param1 ... paramx
Dunno about MSBuild

How to run form in the background from command line

please can anybody tell me to
how to run form in the background from command line
vishal

Ummm....Oracle Forms is a foreground runtime kind of thing. What you want is a database procedure (or an OS utility - it depends on what sort of processing you want to do in the background).
Cheers, APC

Why not all jars picked up by ojdeloy and how to generate build.xml from command line and not JDEV GUI - quick question

Hi All
We have 11.1.1.7 ojdeploy to compile our app.
We notice in the log that not all jars are used in classpath arguments when we explicitly set them up for compilation.
eg:
<path id="classpath">
    <pathelement location="../../Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/commons-el.jar"/>
    <pathelement location="../../Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/jsp-el-api.jar"/>
    <pathelement location="../../Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/oracle-el.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/a.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/b.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/c.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/d.jar"/>
</path>
Log Output -
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/bin/javac
[ora:ojdeploy] -g
[ora:ojdeploy] -Xlint:all
[ora:ojdeploy] -Xlint:-cast
[ora:ojdeploy] -Xlint:-empty
[ora:ojdeploy] -Xlint:-fallthrough
[ora:ojdeploy] -Xlint:-path
[ora:ojdeploy] -Xlint:-serial
[ora:ojdeploy] -Xlint:-unchecked
[ora:ojdeploy] -source 1.6
[ora:ojdeploy] -target 1.6
[ora:ojdeploy] -verbose
[ora:ojdeploy] -encoding Cp1252
[ora:ojdeploy] -classpath
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/jre/lib/resources.jar:
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/jre/lib/rt.jar:
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/jre/lib/jsse.jar:
    [ora:ojdeploy] /path/to/interface/public_html/WEB-INF/lib/a.jar"/>
    [ora:ojdeploy] /path/to/interface/public_html/WEB-INF/lib/c.jar"/>
1- Is it because it depends on how jpr or jws are configured ?
2- How can we automatically generate a build file of the application from command-line (as opposed to using Jdev IDE to click to generate a build.xml) ?

The first warning is happening because you're stating drivers for input devices without need. You haven't disabled hotplug so evdev gets used instead of kbd. This is normal, and you should change the driver line from kbd to evdev so that whatever options (if any) you've specified for the keyboard get parsed.
The second warning is about you not installing acpid.
The third I have no idea about, but look at the synaptics wiki. None of the (WW) are related to your video card.
And every card that has 2 or more output ports show up as "two cards". You also don't need to specify the pci port in xorg.conf. edit: this is the general case with laptops, might be different for desktops.
When I do lspci -v I get:
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. Device 0110
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at dfe80000 (32-bit, non-prefetchable) [size=512K]
I/O ports at d0f0 [size=8]
Memory at c0000000 (32-bit, prefetchable) [size=256M]
Memory at dff00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device 0110
Flags: bus master, fast devsel, latency 0
Memory at dfe00000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
And it doesn't matter if it errs in trying to sli up with it self. That's just not a possibility.
Last edited by gog (2009-10-15 23:59:49)

Generating UDT from command line or C# code

Hi,
I want to write an application which is capable of generating UDTs and hence use the newly generated UDTs in C#. Right at the moment I can only generate the classes via the wizard in Visual Studio ("Generate Custom Class.."), but i know that e.g. for C++ it is possible to generate these types from command line - with OTT.
I appreciate any help, finding a way to automatically generate the user defined types in C# (without manually mapping it).
BR

Hi Sathish,
did you find a solution for this? I am looking for the same thing. I want to write a program(perl, batch script, etc.) which could automatically convert pdf to excel without any manual intervention.
I have the acrobat javascript which could achieve this, but it can only be executed in arobat consolt. I need it to be able to get executed in a script to automate the processing.
thanks
Warren

How to restore or backup Apex application from Command line ? URGENT

We have Oracle apex 4.1 installed in Oracle 11g R2 database (windows 64-bit) 2008 R2
For some reason our database dictionary objects are corrupted.
We wanted to backup our Apex applications in some workspaces ASAP.
We are not able to access apex from http://localhost:7777/pls/apex/htmldb_login
We have an underlying database schema export (expdp).
1) Is there a way to export or backup the apex application without logging into the apex URL ? if yes how ?
2) Does Oracle has any of its own native tool to backup and restore from command line ?
Thanks in advance

My (MS Windows) experience, if I may; perhaps you'll find something useful.
You'll find the README.TXT file in /apex/utilities directory. Read it.
In order to use APEXExport, you need JDK version 1.5 or higher. Check your version by typing (and viewing the result):
C:\>java –version
java version "1.6.0_06"
Java(TM) SE Runtime Environment (build 1.6.0_06-b02)
Java HotSpot(TM) Client VM (build 10.0-b22, mixed mode, sharing)Its directory should be part of the PATH environment variable: on my computer, directory name isC:\Program Files\Java\jre1.6.0_06\binFurthermore, Oracle JDBC class libraries must be part of the CLASSPATH environment variable. Check whether it exists (in Control Panel - System - Advanced - Environment Variables). For my 10gXE, it is here:C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\ojdbc14.jarI couldn't make it work; didn't know that ".\" directory must be entered into CLASSPATH as well (found that information in Arie Geller's book). Therefore, my final CLASSPATH version is:.\;C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\ojdbc14.jarOK, setup is done. Now, go to your /apex/utilities directory and, from the command prompt, run (mind the upper case!)java oracle.apex.APEXExportwhich will show a short help.
I chose to export the whole workspace. In order to do that, I need the workspace ID (got it from Apex's SQL Workshop; that might be a problem as you can't get there, can you? I can't tell how to find that information apart from SQL Workshop, but I'm pretty sure someone, who is much more experienced than me, will know it). OK, here's how you find it:select v('WORKSPACE_ID') from dual;Finally, here's the final step - export:C:\apex\utilities>java oracle.apex.APEXExport -db localhost:1521:xe -user scott -password tiger -workspaceid 1038408092496568The result are fxxx.sql files (where "xxx" represents application number).
I hope you'll manage to export your applications; basically, nothing special here (except that ".\" directory in the CLASSPATH variable).
Best of luck!

Problem with tokenized input from command line

I am trying to take an input from the command line, parse it to tokens and perform whatever operation is needed depending on the name of the token, on a binary tree of stacks for example, if i type 1 2 1 3 printLevelOrder, then the root of the tree should have 3, 2,1 in the stack, the left child should have 1 and the right child should be empty. and then a level order print of the tree should be performed.
however what is happening when i run this code is the numbers are being put into the right stacks of the tree, but any commands such as printLevelOrder or PrintPopRoot are entering the code that is for placing numbers onto the stack instead of executing that command and skipping past this piece of code.
so my question is, why is the if statement if (word =="printLevelOrder") not being executed when thats whats in the word ?
example input and output shown below code fragment.
          try {
              BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
             String line = "";
             while (line != "***") {
                  System.out.print("> prompt ");
                  line = in.readLine();
                  StringTokenizer tokenizer = new StringTokenizer(line," ");
                  String word = new String();
                  while (tokenizer.hasMoreTokens()) {
                         word = tokenizer.nextToken();
                         boolean notCommand = true;
                         if (word =="printLevelOrder") {
                              theTree.printLevelOrder();
                              System.out.println("(word ==printLevelOrder)");
                              notCommand=false;
                         if (word == "printPopLevelOrder") {
                              theTree.printPopLevelOrder();
                              notCommand=false;
                         if (word == "printPopInorder") {
                              theTree.printPopInorder();
                              notCommand=false;
                         if (word == "printPopPreorder") {
                              theTree.printPopPreorder();
                              notCommand=false;
                         if (word == "printPopRoot") {
                              theTree.printPopRoot();
                              notCommand=false;
                         if (word == "***") {
                              notCommand=false;
                         if (notCommand == true) {
                              System.out.println("(notCommand == true)");
                              boolean notPlaced = true;
                              int v = 1;
                              while ((notPlaced==true) && (v < theTree.size())) {
                                   if (theTree.element(v).isEmpty()) {
                                        theTree.element(v).push(Integer.valueOf(word));
                                        System.out.println("Inserting"+word);
                                        System.out.println("in empty stack at location: "+v);
                                        notPlaced=false;
                                   if (notPlaced==true) {
                                        if ( Integer.valueOf(word) >= Integer.valueOf( theTree.element(v).top().toString() ) ) {
                                             theTree.element(v).push(Integer.valueOf(word));
                                             System.out.println("Inserting"+word);
                                             System.out.println("in stack at location: "+v);
                                             notPlaced=false;
                                   v++;
          }valid inputs: int value, printLevelOrder, printPopLevelOrder, printPopInorder, p
rintPopPreorder, printPopRoot, *** to quit
prompt 1 3 2 4 2 printLevelOrder(notCommand == true)
Inserting1
in empty stack at location: 1
(notCommand == true)
Inserting3
in stack at location: 1
(notCommand == true)
Inserting2
in empty stack at location: 2
(notCommand == true)
Inserting4
in stack at location: 1
(notCommand == true)
Inserting2
in stack at location: 2
(notCommand == true)
Exception in thread "main" java.lang.NumberFormatException: For input string: "printLevelOrder"
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
at java.lang.Integer.parseInt(Integer.java:447)
at java.lang.Integer.valueOf(Integer.java:553)
at TreeStack.main(TreeStack.java:73)
Press any key to continue . . .

lol aww, shame that you forgot to do that. i had 10 / 10 for mine, and seing as the deadline is now well and trully over,
here is the entire source for anybody who was following the discussion or whatever and wanted to experiment.
additional files needed >
http://users.cs.cf.ac.uk/Paul.Rosin/CM0212/Stack.java
http://users.cs.cf.ac.uk/Paul.Rosin/CM0212/ArrayStack.java
http://users.cs.cf.ac.uk/Paul.Rosin/CM0212/StackEmptyException.java
http://users.cs.cf.ac.uk/Paul.Rosin/CM0212/StackFullException.java
/*TreeStack.java - reads command line input of values and assigns them to stacks in a binary tree and performs
operations on the ADT. valid inputs: <int>,   printLevelOrder,   printPopLevelOrder,
printPopInorder,   printPopPreOrder,   printPopRoot.         Terminates on invalid input.
Written by George St. Clair.
S/N:0208456         22/11/2005
import java.util.Vector;
import java.io.*;
import java.util.StringTokenizer;
public class TreeStack {
     private final int TREE_CAPACITY = 7 + 1;
     private final int STACK_CAPACITY = 10;
     Vector tree = new Vector(TREE_CAPACITY) ;
     //collect input from command line, add values to stacks at nodes of the teee
     //and perform required operations on the treestack
     public static void main (String [] args) {
          //create a tree of stacks
          TreeStack theTree = new TreeStack ();
          try {
               //collect standard input
              BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
             String line = "";
             while (line != null) {
                    System.out.print("");
                  line = in.readLine();
                  //tokenise input
                  StringTokenizer tokenizer = new StringTokenizer(line," ");
                  String word = new String();
                  while (tokenizer.hasMoreTokens()) {
                         //assign word to the token
                         word = tokenizer.nextToken();
                         boolean notCommand = true;
                         //perform operation on treestack depending on what word is
                         if (word.equals("printLevelOrder")) {
                              System.out.println("printLevelOrder");
                              theTree.printLevelOrder();
                              notCommand=false;
                         if (word.equals("printPopLevelOrder")) {
                              System.out.println("printPopLevelOrder");
                              theTree.printPopLevelOrder();
                              notCommand=false;
                         if (word.equals("printPopInorder")) {
                              System.out.println("printPopInorder");
                              theTree.printPopInorder();
                              notCommand=false;
                         if (word.equals("printPopPreorder")) {
                              System.out.println("printPopPreorder");
                              theTree.printPopPreorder();
                              notCommand=false;
                         if (word.equals("printPopRoot")) {
                              System.out.println("printPopRoot");
                              theTree.printPopRoot();
                              notCommand=false;
                         //if word was not a command it must be a number
                         if (notCommand == true) {
                              boolean notPlaced = true;
                              int v = 1;
                              //starting at the root, find suitable place for number
                              while ((notPlaced==true) && (v < theTree.size())) {
                                   //if the stack at v is empty, number goes here
                                   if (theTree.element(v).isEmpty()) {
                                        theTree.element(v).push(Integer.valueOf(word));
                                        System.out.println("inserting: "+word);
                                        System.out.println("in empty stack at location: "+(v-1));
                                        notPlaced=false;
                                   //if the stack is not empty
                                   if (notPlaced==true) {
                                        //if the value on the top of the stack is smaller than number, number goes onto the stack
                                        if ( Integer.valueOf(word) > Integer.valueOf( theTree.element(v).top().toString() ) ) {
                                             theTree.element(v).push(Integer.valueOf(word));
                                             System.out.println("inserting: "+word);
                                             System.out.println("in stack at location: "+(v-1));
                                             notPlaced=false;
                                   //if that node was no good, check the next one for suitability
                                   v++;
          catch (Exception e) {
               //occurs when user inputs something that is neither a command, or a number, or upon EOF, or stack is full
     public TreeStack () {
          //create the TreeStack ADT by adding stacks in the vector, note vector 0 is instantiated but not used.
          for (int i = 1;i<=TREE_CAPACITY;i++)
               tree.add(new ArrayStack(STACK_CAPACITY));
     public int size() {
          //return the size of the tree +1 (as 0 is not used)
          return tree.size();
     public ArrayStack element (int v) {
          //return the ArrayStack at v
          return (ArrayStack)tree.get(v);
     public int leftChild (int v ) {
          //return left child of v
          return v*2;
     public int rightChild (int v ) {
          //return the right child of v
          return v*2+1;
     public boolean children (int v ) {
          //search for children of v and return true if one exists
          for (int i =v;i<size();i++) {
               if (i/2==v ) {
                     //left child found at i
                     return true;
               if ((i-1)/2==v ) {
                    //right child found at i
                    return true;
          //no children found
          return false;
     public boolean isInternal (int v ) {
          //test whether node v is internal (has children)
          if (children (v)== true) {
               //has children
               return true;
          return false;
     //print the top value in each stack encountered on a level-order traversal of tree
     public void printLevelOrder() {
          //for every node of tree v
          for (int v = 1;v<size();v++) {
               if (!element(v).isEmpty() ) {
                    //print the top value in stack v
                    System.out.println(" "+element(v).top());
               else {
                    //stack at v is empty
                    System.out.println(" -");
     //pop off and print the top value in each stack encountered on a level-order traversal of tree
     public void printPopLevelOrder () {
          //pop off and print the top value in stack v
          for (int v = 1;v<size();v++) {
          //for each node of tree v
               if (!element(v).isEmpty() ) {
                    //if v isnt empty print the top value in stack v
                    System.out.println(" "+element(v).top());
                    //pop the top value in the stack at v
                    element(v).pop();
               else {
                    //stack at v is empty
                    System.out.println(" -");
     //pop off and print the top value in each stack encountered on an in-order traversal of tree
     public void printPopInorder () {
          printPopInorder (1);
     public void printPopInorder (int v) {
          boolean isInternal = false;
          if (isInternal (v)) {
               //use a boolean for isInternal to save on running the method twice
               isInternal = true;
               //recursively search left subtree
               printPopInorder (leftChild(v));
          //pop off and print the top value at v
          if (element(v).isEmpty() ) {
               //stack at v is empty
               System.out.println(" -");
          else {
               //if v isnt empty print the top value in stack v then pop
               System.out.println(" "+element(v).top());
               element(v).pop();
          if (isInternal ) {
               //recursively search right subtree
               printPopInorder (rightChild(v));
     //pop off and print the top value in each stack encountered on an pre-order traversal of tree
     public void printPopPreorder() {
          printPopPreorder(1);
     public void printPopPreorder(int v) {
          //pop off and print the top value at v
          if (!element(v).isEmpty() ) {
               //if v isnt empty print the top value in stack v then pop
               System.out.println(" "+element(v).top());
               element(v).pop();
          else {
               //stack at v is empty
               System.out.println(" -");
          if (isInternal (v)) {
               //recursively search left and right subtrees
               printPopPreorder (leftChild(v));
               printPopPreorder (rightChild(v));
     //pop off and print all values from the stack at the root
     public void printPopRoot (){
          //while the root stack has values left
          while (!element(1).isEmpty()) {
               //print, then pop
               System.out.println(" "+element(1).top());
               element(1).pop();
}

Upgrading ASA from command line

Similar Messages

Maybe you are looking for