Upgrading call manager from version 8 to 9

Hi All
Can anyone please tell me the summary steps on what I need to do to go from call manager version 8 to version 9?
many thanks
Carl

The answer to your question, is that they entirely depend on you exact CUCM versions, asking here and just saying "8 "does not work. You will need to do your due diligence, and read:
A) Upgrade guide for your target version
B) Release Notes
C) New and changed doc, if not included in the RNs already
They will provide you with ALL you need to perform the upgrade, pre-reqs, procedure, and post-upgrade changes to the VM. All the information is available on cisco.com under the CUCM main documentation site.
Once you've been thru those, you can come back with any further questions.

Similar Messages

Upgrade Call Manager from 8.6.2 to 10.5

Hello All,
We are planning to upgrade a Cisco Call Manager Publisher node from 8.6.2 to 10.5. We want to install a new publisher on a new environment, but we are struggling with some questions.
If we install the Pub node 10.5 can we migrate the configuration from the 8.6.2 to 10.5? Do we need a special tool for this?
If above doesn't work, we can still migrate the existing call manager towards the new servers and start the upgrade, the only problem we face there is that we have to change the publisher's IP because we want to use a new ip addressing scheme.
Kr,
Yannick Vranckx

Your best bet is to use the new tool: cisco prime collaboration deployment. This fits perfectly into what you want to do here and can easily help you with all aspect of the migration including the ip address change. You can learn how to use the tool here..
https://www.youtube.com/watch?v=JzG4kz1_hL4

Upgrade Call Manager from 8.5(1) to 10.5(1) and migrate from MCS to UCS...

We are upgrading UCM from 8.5(1) to 10.5(1) and migrating from MCS to UCS. We used UCM 8.5 OVA (7500 user) and migrated to UCS.
Once migrated to UCS we upgraded UCM to 10.5(1). We wanted to use OVA to accommodate 10,000 users, hence took backup of 10.5(1) cluster and installed new servers with new 10.5(1) OVA (10,000 users).
While doing DRS restore, system we were not able to perform a restore. It seems UCM is not recognizing the XML file. It is strange as we took the back from UCM 10.5(1) and trying to restore same version, only difference is upgrade was done with 7500 user OVA and we are now trying to install 10,000 user OVA.
Has anyone run into similar issue? any help will be great.
Thank You.

This thread is 5 months old but doesn't seem resolved...
I ran into this same scenario last week. Was using the same SFTP server for backups and restores during migration from 7.1(5) to 10.5 and during final rebuild/restore of the "to-be" production 10.5 Publisher, the DRS server was unresponsive and blamed the Master Agent or SFTP server. I had restarted Master and Local agent repeatedly, and regenerated ipsec certs to no avail.
TAC suggested I try a different SFTP server (which I already had, with the same files), and try deleting the .xml files that were included with the backup (drfComponent.xml and processhost.xml). I installed TitanFTP, per TAC's recommendation, deleted the processhost.xml file, regenerated the ipsec certificate one last time, restarted DRF Master, and then DRF Agent, and was able to start a DRS Restore.
Try the above process if you're still having issues.

Upgrade Call Manager

Hello All,
our company is planning to upgrade Cisco Call manager 5.0 to version 8. Can you please help me out what the procedure will be. Or also what the steps i need to follow to upgrade from 5 to 8.

Hi ,
For upgrading call manager from version 5 to 8 , u need to consider the following steps:
a. you need to have valid ESW and UCSS contract since this would be a major upgrade.
b. Check for existing Hardware since DRAM and HDD requirements are different for version 8.0(3) and above.
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html
c. you also need to check the software compatibility matrix.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr1.pdf
regds,
aman

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

I have upgraded Acrobat Standard from version 8 through time until I am currently using version X, which doesn't work with Office 2013. Can I upgrade to version Standard XI?

Over the years I have upgraded Acrobat Standard from version 8 to currently working with version X.
However, since getting a new laptop it doesn't work with Office 2013.
Can I upgrade to Standard XI?

Upgrade pricing now only applies to version 9 and X. So if you have a retail serial number for X, you should be able to upgrade. (Or consider subscription).

Does anybody know benefices of upgrading SAP ERP from version ECC 6.0 EHP 7 to ECC 6.06 EHP 10?

An upgrade of ERP SAP from version ECC 6.0 EHP 7 to ECC 6.06 EHP 10 is being planned in the company I work for. However, I don´t know what the benefices are to implement this upgrade so I wonder if someone knows benefices of upgrading SAP ERP from version ECC 6.0 EHP 7 to ECC 6.06 EHP 10?
Regards, Alejandro

Hi _Miguel
I am going from ECC 6.0 to ECC 6.06. However, I don´t know what the benefices are to implement this upgrade so I wonder if someone knows benefices of upgrading SAP ERP from version 6.0 to 6.06
regards, Alejandro

Upgrade Call Manager 6.5

Hello Team,
Just to get confirmation about the MCS Servers 7800 Series that is it recommanded to upgrade Call Manager 6.5 which is running
on MCS 7800 Series Server to Call Manager 9. CM-9 us fully unified.
Thanks,

Supported Servers for Releases of Cisco Unified Communications Manager (Including Business Edition 3000/5000/6000 and Session Manager Edition) and Cisco Intercompany Media Engine
http://www.cisco.com/en/US/partner/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Advice on upgrading ASA 5510 from version 8.4(4)1

Hello all,
Due to an issue we need to upgrade our ASA. Cisco Support team recommended upgrading to version 8.4.7, but, as we'll upgrade, we'd like to upgrade to version 9.
We still use Cisco VPN Client for Remote Access VPNs so I'd like your advice on which version to install on ASA.
Would you recommend version 9.0.3? 9.1.X?
Thanks in advance,
Igor

We have a pretty huge ASA and ASASM complex, and we are just about finished upgrading from an assortment of 8.4.x, 8.5.x, and 8.6.x installs to 9.1.3 on everything. There is one gotcha on some systems in that there is a file system change or some sort of bug that is fixed in 8.4.5 I think. So you _may_ have to first upgrade to a newer version (8.4.7 would work) before going to 9.1.3.
Our Cisco team has recommended going to version 9.x, and this is supported by recent tickets I've had on our stuff still running on 8.x, as the TAC engineer often says we need to upgrade to version 9.
Four our setup, we had some fatal bugs in 8.4.6 and 8.4.7 that kept us running 8.4.5 for a very long time on some equipment.
Anyway, I would recommend going to 9.1.3, which is one removed from the recently recleased 9.1.4. Our AnyConnect VPN complex has been on 9.1.3 for a few months now with no issues. Be sure to read the release notes thoroughly as 9.x changes some command contexts, new features, etc.
Graham

Upgrading SAP BW from version 7.0 to 7.4

Hello Everyone,
We are going to upgrade the BW system from version 7.0 to 7.4. My question is that, we have 3.5 flow as well in our system, so would it cause any issue while upgrading or we should do the migration of 3.5 flow to 7.0 first and then we should go for upgrade. Does 7.4 supports 3.5 flow? Please suggest.

SAP BW 7.4 supports 3.5 flows and i guess upcoming version will also supports 3.5 flow.
The 3.5 flow will not create any issues during SAP BW upgrade.The migration of 3.5 to 7.0 is also not mandatory.The Application upgrade is taken care by SUM tool.It will not differentiate any flows (3.5/7.0). It will upgrade all BW objects to 7.4 versions.

Upgrading Enterprise Manager from 10.2.0.5 to 11.1 (What are add-ons?)

Hi There,
I am about to upgrade our Oracle Enterprise Manager OMS from 10.2.0.5 to 11.1. I'm trying to figure out which document to use. I have the SQL Server Plugin installed on our OMS and I'm wondering if this is concidered an add-on. If this is the case I should follow the document: Oracle enterprise manager grid control advanced installation and configuration guide and follow: upgrading enterprise manager grid control with add-ons? Correct?
Thanks,
J

user560159 wrote:
Hi There,
I am about to upgrade our Oracle Enterprise Manager OMS from 10.2.0.5 to 11.1. I'm trying to figure out which document to use. I have the SQL Server Plugin installed on our OMS and I'm wondering if this is concidered an add-on. If this is the case I should follow the document: Oracle enterprise manager grid control advanced installation and configuration guide and follow: upgrading enterprise manager grid control with add-ons? Correct?
Thanks,
JAs 12C is also launched , may be you can wait for some time and directly go for 12C. Because in 10.2.0.5 and 11.1 , we don't have much difference functionality wise.
Apart from Oracle Docs which you mentioned , you can also have a look at MOS note :
FAQ: Grid Control 11g Install / Upgrade Frequently Asked Questions [ID 1073184.1]
Thanks
Rajesh

Downloaded adobe exchange in CS6, I was prompted to upgrade the Extension Manager from version 6.0.0.412 to 6.0.8 . I keep getting error code: U44M1P7 - any suggestions? tks

can anyone help me with the error code U44M1P7? thanks

Please delete the EM CS6 installation folder manually, then download and install the EM 6.0.8 from Adobe - Exchange : Download the Adobe Extension Manager

I can't upgrade my Iphoto from version 9.1.1 (527)

Hi.
I am trying to upgrade my Iphoto. I currently have version 9.1.1 (527).
When i open Iphoto i get a promt, that there is a new version, and would i like to download it. Sure! But when the appstore opens, where the upgrade should be there is nothing there.
Ive tried other solutions, such as searching for Iphoto in Spotlight, opening Iphoto, and manually clicking the "search for updates" or what it is called in the drop-down menu.
Then i found differnt upgradefiles here on the apple-site. I downloaded upgrades 9.1, 9.3.1, 9.3.2. But when i tried to apply them, a error message says that i have to have Iphoto 9.1 installed on my mac to upgrade.. But, i have that already don't I, as i have Iphoto version 9.1.1 (527) ??
Ive read that you could delete it, and download it again from the appstore, but im not gonna pay to download something i already own !
Can anybody help me ?
Thanks,
Simen

How old is your Mac? If it's very recent you need to update via the App Store
If you purchased at the App Store you need to update via the App Store
Otherwise you update via Softare Update
--> If you have moved iPhoto from the default location (i.e. into a Folder) then the updater won't find it. Move it back.
-- > If you have renamed iPhoto, the updater won't find it. Change it back.
Regards
TD

I want to upgrade to Lion from version 10.4.11 how do I do this?

Hi
I want to upgrade my Macbook to the latest Lion software but do I have to upgrade to Snow Leopard first then go to Lion?
Can I do this online or do I need to go in store?
current version 10.4.11
thanks

You can upgrade from 10.4 to 10.6 with no problems. Any program that runs under 10.4 should run under10.6. See this list for compatibility with 10.6: http://snowleopard.wikidot.com/ You might have to upgrade some drivers for printers, etc.... And you will have to install Rosetta if you have any third party Power PC applications http://www.macobserver.com/tmo/article/snow_leopard_installing_rosetta/ I recently upgraded an older MacBook (model 1,1) straight from 10.4 to 10.6.
To upgrade your iLife and iWork. If you only want iPhoto or other single apps from iLife '11 you can get them from the App Store after you've upgraded to 10.6.6. iPhoto, iMovie or Garage Band for $15 each and Pages, Keynote or Numbers from iWork '09 for $20 each.
Once you are at 10.6.8 you can buy Lion for $29 from the App Store if you have at least a model 2,1 MacBook. Lion will require at least 2gb of RAM but really needs 4gb to run smoothly. As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
Before Mac switched to Intel processors they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

VZAccess Manager not working with Mountain lion Must upgrade VZaccess manager to version

You must update VZ Access Manager to verision 7.4.5 before upgrading to mountain Lion from Lion if you use a Verizon USB modem to access the internet. If you do not upgrade VZ Access manager first you will not have Internet access after you upgrade to Mountain Lion Ver 10.8.2 and will have no way to update VZAcess manager

If you are attempting to use a VZ Access Manager installer earlier than 7.4.5 on Mountain Lion, the software is incompatible. You should use the following link to determine if your device is supported by 7.4.5 on Mountain Lion, and if true, get the 7.4.5 software.
Is this an error message coming from an attempt to install VZ Access Manager v7.4.5 on Mountain Lion? If so, it is interesting that they assume people would know this tidbit before their ML upgrade, or expect people to reinstall an operating system to properly upgrade their connection software.
I just checked the requirements for 7.4.5 and it claims Mountain Lion compatibility. And, you are allowed to select either Lion or Mountain Lion in the download selection process. If you could only install 7.4.5 in Lion before a 10.8 upgrade, why is there a separate 10.8 selection criteria for installation?
2Os support may vary by device
Goodl luck with this.

Upgrading call manager from version 8 to 9

Similar Messages

Maybe you are looking for