Upgrading CIM objects from 6.30 to 6.40

Hi,
I am trying to setup JDI and I see that the CIM objects SAP-JEE, SAP_BUILDT and SAP_JBASIS is of release 6.30. Is there a way I can upgrade these objects from 6.30 to 6.40
Thanks in advance!!
Kiran

Similar Messages

Steps to upgrade Bw Objects from BW 3.5 to BW 7.0

I have upgraded a NW2004(BW3.5) system to NW2004s(BW 7.0) .
After upgrade i see that the infocubes, infoobjects are still in BW 3.5 Concept itself.
When i open each object and save it , it is changing to BW 7 Object. But there are about 10000 objects. Please let me know the steps to upgrade the Objects to BW 7.0

Just upgrade.
There are some guides in service.sap.com and lots of notes on upgrade.
Reg efforts, it is totally dependent on the no of objects, etc to upgrade / convert and so many other factors. Even a rought estimate will not be possible without the knowledge of the system.
Ravi Thothadri

Copying objects from Illustrator CS3 to FreeHand 11.0.2

Working on a Mac in OSX 10.4.11, I was able to select and copy objects in an open Illustrator CS2 file and paste them into an open FreeHand 11.0.2 file, where they would be fully editable. After migrating to OSX 10.6.2 and upgrading to CS3, this no longer works - the objects selected and copied from Illustrator either do not appear (only corner indicators are visible) or a pale version appears as an uneditable low-rez image with funny colors....
Because there are so many missing features in Illustrator, it's important for me to be able to work back and forth between the two apps. Has anyone been able to achieve this (formerly) simple interactivity?

I got the following post from Danny Haas:
If you go to Edit>Special>Paste Special and then select AI/EPS from the list
it should paste just fine. It works well for me.
Worked for me too, although text was not imported as editable text. To do
that had to special paste the text separately as unformatted text, and then
reformat in FH.
From: Judy_Arndt <[email protected]>
Reply-To: <[email protected]>
Date: Wed, 13 Jan 2010 17:19:27 -0700
To: PETER AGOOS <[email protected]>
Subject: Copying objects from Illustrator CS3 to FreeHand 11.0.2
I skipped AICS3, but now use AICS4 for some tasks.
The only solution I've found is to save the AI CS4 file as AI 8, open that
in FHMX and copy from there.

Upgrade to R2 from SCOM 2012 SP 1 UR 4 - Final configuration failed to install

I was upgrading our test SCOM 2012 SP1 UR 4 sever to R2 and ran into the following issue:
Setup cannot be completed… Final configuration failed to install.
Everything else upgraded fine.
There was no rollback performed…. The log states “Skipping rollback for install item Final Configuration as it was not successfully installed”
Looking in OpsManagerSetupWizard.log in the section for Final Configuration I see the following:
[16:00:43]:           Always: :!***** Installing: POSTINSTALL ***
[16:00:43]:           Info:      :SetProgressScreen: StartMinorStep.
[16:00:43]:           Warn:    :ApplyUpdates: Unable to load QFE file.
[16:00:43]:           Always: :Doing Preinstall task for POSTINSTALL
[16:00:43]:           Warn:    :CheckAndLoadUpdateFiles: Unable to load QFE file.
[16:00:43]:           Always: :Doing Install task for POSTINSTALL
[16:00:44]:           Debug: :DoInstallTask: Found Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.PostInstall;PostInstallProcessor as type and method.
[16:00:44]:           Info:      :Type: Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.PostInstall Method: PostInstallProcessor
[16:00:44]:           Info:      :SetProgressScreen: Init Exe Install progress.
[16:00:44]:           Info:      :AddUninstallChangeEntry: Cleaning out existing files at the ARP file cache location D:\Program Files\System Center 2012\Operations
Manager\Setup
[16:00:44]:           Error:     :InstallActionProcessor.DoInstallTask: method PostInstallProcessor threw exception. We will return installSuccessful = false.:
Threw Exception.Type: System.Reflection.TargetInvocationException, Exception Error Code: 0x80131604, Exception.Message: Exception has been thrown by the target of an invocation.
[16:00:44]:           Error:     :StackTrace:   at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
   at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at Microsoft.SystemCenter.Essentials.SetupFramework.InstallActionProcessor.DoInstallTask(InstallItemsInstallDataItem itemToInstall)
[16:00:44]:           Error:     :Inner Exception.Type: System.UnauthorizedAccessException, Exception Error Code: 0x80131604, Exception.Message: Access to the path 'EULA_EN_EVAL.RTF'
is denied.
[16:00:44]:           Error:     :InnerException.StackTrace:   at System.IO.Directory.DeleteHelper(String fullPath, String userPath, Boolean recursive, Boolean
throwOnTopLevelDirectoryNotFound)
   at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.ARPFileCache()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.AddUninstallChangeEntry()
   at Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.PostInstall.PostInstallProcessor(Func`3 setProgressScreen)
[16:00:44]:           Error:     :ProcessInstalls: Install Item Final Configuration failed to install. We did not launch the post process delegate.
[16:00:44]:           Always: :SetErrorType: Setting VitalFailure. currentInstallItem: Final Configuration
[16:00:44]:           Info:      :SetProgressScreen: FinishMinorStep.
[16:00:44]:           Always: :****************************************************************
[16:00:44]:           Always: :****Starting*RollBack*******************************************
[16:00:44]:           Always: :****************************************************************
[16:00:44]:           Info:      :SetProgressScreen: StartMinorStep.
[16:00:44]:           Always: :ProcessRollback: Skipping rollback for install item Final Configuration as it was not successfully installed.
[16:00:44]:           Always: :****************************************************************
[16:00:44]:           Always: :****Ended*RollBack**********************************************
[16:00:44]:           Always: :****************************************************************
[16:00:44]:           Always: :Entering Page: FinishPage
The log states “Access to the path 'EULA_EN_EVAL.RTF' is denied.” I was able to find this file in D:\Program Files\System Center 2012\Operations Manager\SetupTemp\EN, but when viewing its contents I see it
was from the SP 1 upgrade as it starts off with “MICROSOFT EVALUATION SOFTWARE LICENSE TERMS MICROSOFT SYSTEM CENTER 2012 STANDARD SERVICE PACK 1.” Based on everything else referenced in the log file previously, it seems like it was trying to locate
this file in D:\Program Files\System Center 2012\Operations Manager\Setup. Also, I applied the product key after installing SP1 previously, so it was not running with an evaluation license.
Running Get-SCOMManagementGroup | ft skuforlicense, version, timeofexpiration –a
gives me:
SkuForLicense Version     TimeOfExpiration
       Retail 7.1.10226.0 12/31/9999 11:59:59 PM
The version (7.1.10226.0) is that of SCOM 2012 R2 (as I noted before, there was no rollback.) Everything seems to be functioning fine (Console, Web Console, Reporting Services.)
Is there a way to get it to re-run only the Final Configuration steps (which will probably fail again as the EULA file does not exist where it expects it)? I am not sure if there were supposed to be any further
configuration steps that did not get completed, so i dont know how stable SCOM is now. Should I re-run the R2 installer? Or is it OK as is? The only info online about a SCOM Install where the final configuration failed to install dealt with
an error upgrading the SCOM Console, which is not relevant to my situation. This is my test SCOM environment, running on a VM. I could revert to the pre-upgrade snapshot and see if another upgrade attempt completes successfully, but if that does
work I am concerned that something like this may happen in my prod environment, which is not running on a VM, so has no ability to revert to a snapshot.

Hi,
Please refer to the following links:
Do I need a specific Cumulative Update Release (UR) in order to upgrade to SCOM 2012 or 2012 SP1 or 2012 R2?
http://blogs.technet.com/b/kevinholman/archive/2014/01/20/do-i-need-a-specific-cumulative-update-release-ur-in-order-to-upgrade-to-scom-2012-or-2012-sp1-or-2012-r2.aspx
Upgrading Operations Manager from 2012 SP1 to 2012 R2 step by step
http://www.systemcentercentral.com/upgrading-operations-manager-from-2012-sp1-to-2012-r2-step-by-step-upgrading-to-2012-r2-series/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+systemcenterforum+%28System+Center+Central+Rollup%29
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error : Only edit objects from package ZSD in local requests

Hi Experts,
We are modifying all Z-programs to unicode enabled programs in ECC6.0 Upgradation. While doing this we are not able to save it as a transportable request. It displays error as "Only edit objects from package ZSD in local requests".
So can anyone tell me how to save it as a transportable request.
Thanks,
Ranjith C.

Hi,
two ways:
1. change the transport type: create transport type copy in se01 and copy all mentioned objects to that transport
2. better way: correct development class and transport layer
case a. target system was not definied (not known to TMS) or is empty
case b. source system (original system for objects) not known to TMS
case c. objects assigned to local package (former local development class)
etc.
If you don't understand this explanation, just use one of Z transport layers showed in stms, by changing the transport layer in the definition of the package (se80) to shown in STMS (link name from source to targed system)
Kind regards,
Mirek

RGZPFM stopped working after OS upgrade to V5R4 from V5R3

Hi Guys,
We recently upgraded the operating system on our DEV & TEST boxes from V5R3 to V5R4.
Before the upgrade, we used to use the program ZRGZPFM attached in SAP note number: 84081 Reorganization of database tables (RGZPFM) for Re-Organizing the database tables weekly after the offline backup.
Now When we submit this program with the parameters &LIBRARY= R3<SID>DATA & &THRESHOLD =1000, we get the following Error:
CALL PGM(*LIBL/ZRGZPFM) PARM(R3BWTDATA 1000)
Object MBRLIST in QTEMP type *FILE not found.
Output file MBRLIST created in library QTEMP.
Member MBRLIST added to output file MBRLIST in library QTEMP.
16108 records added to member MBRLIST in file MBRLIST in QTEMP.
String constant beginning "QDBRGZ_R" not delimited.
The fast copy, or initialization can not be done.
Function check. CPF3169 unmonitored by ZRGZPFM at statement 1800,
instruction X'004C'.
CPF3169 received by ZRGZPFM at 1800. (C D I R)
When we do a F1 above on the "String constant beginning "QDBRGZ_R" not delimited", it shows us the following message:
Message ID . . . . . . :   SQL0010       Severity . . . . . . . :   35
Message type . . . . . :   Diagnostic
Date sent . . . . . . :   02/11/07      Time sent . . . . . . :   18:31:49
Message . . . . :   String constant beginning "QDBRGZ_R" not delimited.
Cause . . . . . :   The string delimiter is missing in the constant beginning
with "QDBRGZ_R". The string is treated as if it were delimited by the end
of the source file.
Recovery . . . :   Delimit the string constant. Check for any missing or
extra quotation marks and apostrophes. These errors are likely to cause
other errors. Some statements may not have been processed as the result of
either missing or extra string delimiters. Precompile the program again.
I have tried recompiling and generating the object ZRGZPFM after the OS upgrade...Also deleted the duplicate ZRGZPFM object from the library ZRPLOBJ
and checked after the re-generation that the object is the latest generated version...
I have checked the File QDBR0001 in library QRECOVERY....which is generated during the Re-org...Also tried deleting the file and then restarting the job but to no success....
The same program was running perfectly till Last week in V5R3...and the same program is running perfectly in our PROD box...for which we are planning to upgrade the OS this coming weekend..., which I guess we may have to defer...if this is not resolved....
just running out of ideas altogether...Cud it be a PTF or something else...??
Thanks for all your help guys...
Abhi

Hi Christian,
Thanks a lot for the response. Yeah, even I was stumped as to what is "QDBRGZ_R"??
I think that this maybe QDBRGZ_R3<SID>DATA_/<file_name>, which it reads from probably library QRECOVERY/QDBR0001 at runtime. This QDBR0001 is created I guess,when the reorgs run.
and during the Re-Org, it is not able to read the proper file name(SQL error) and hence bombs out...My Theory....I do not know why although...???
not sure although...
Yes, tried, recompiling the program in V5R4 as I mentioned before in both my DEV/TEST boxes and the same result. Infact, both my boxes give exactly the same error, as mentioned before.
I did not guess a chance to Dump the CL variables as now the systems are up. But I will try tonight to do it. Will definitely post the dump.
Thanks
Abhi

Proxy object from "Enterprise Service" in SE80 is not available?

Hi all,
We are currently working on SAP CRM, the component version is SAP CRM ABAP 6.0 (SAP CRM 2007).
Previously the component version was SAP CRM 5.0, so as you can understand it has been upgraded from 5.0 to 6.0.
Now when we use the transaction code SE80 and try to create a "proxy object" from "Enterprise Service" in the context menu, this feature is no more available.
Initially it was available in SAP CRM 5.0.
Can anyone tell me What is missing in the current version SAP CRM ABAP 6.0 ? Do we need to install any Add-on?

Yes...I got it...

CMS fails - Error 500 - since upgrading to SP19 (from 15) - [RESOLVED]

We have been using XI3.0 for almost two years now, however after patching to SP19, our CMS system has failed - Error 500:
500   Internal Server Error
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   com.sap.tc.webdynpro.progmodel.controller.MessageManager$AbortMessageManagerException: Unexpected error; inform your system administrator - (class: com/sap/cms/pcs/conf/core/plugin/DefaultTrack, method: readTrackConfiguration signature: (Ljava/lang/String;Ljava/lang/String;)Lcom/sap/cms/client/types/config/TrackConfigurationObject;) Incompatible object argument for function call
    at com.sap.tc.webdynpro.progmodel.controller.MessageManager.raiseMessageInternal(MessageManager.java:254)
    at com.sap.tc.webdynpro.progmodel.controller.MessageManager.raiseMessage(MessageManager.java:964)
    at com.sap.cms.ui.wl.Custom1.getConfigurationDataOfTrack(Custom1.java:10038)
    at com.sap.cms.ui.wl.Custom1.setSelectedTrack(Custom1.java:2823)
    at com.sap.cms.ui.wl.Custom1.prepareTransportStudio(Custom1.java:3585)
    ... 46 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; {12F65990-D65C-C5FA-1449-43FE4509287F}; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
Version
DOM version
Client Type msie6
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, Build ID: 6.4019.00.0000.20061005104024.0000 (release=630_VAL_REL, buildtime=2006-10-26:20:43:46[UTC], changelist=419718, host=PWDFM026)
J2EE Engine 6.40 patchlevel 106831.313
Java VM Java HotSpot(TM) Server VM, version:1.4.2_08-b03, vendor: Sun Microsystems Inc.
Operating system Windows 2003, version: 5.2, architecture: x86
Other
Session Locale en
Time of Failure Tue Jan 30 09:30:57 UTC 2007 (Java Time: 1170149457113)
Web Dynpro Code Generation Infos
sap.com/tcSLCMS~WebUI
SapDictionaryGenerationCore (unknown)
SapDictionaryGenerationTemplates (unknown)
SapGenerationFrameworkCore (unknown)
SapIdeWebDynproCheckLayer (unknown)
SapMetamodelCommon (unknown)
SapMetamodelCore (unknown)
SapMetamodelDictionary (unknown)
SapMetamodelWebDynpro (unknown)
SapWebDynproGenerationCTemplates (unknown)
SapWebDynproGenerationCore (unknown)
SapWebDynproGenerationTemplates (unknown)
sap.com/tcwddispwda
No information available
sap.com/tcwdcorecomp
No information available
Detailed Error Information
Detailed Exception Chain
com.sap.tc.webdynpro.progmodel.controller.MessageManager$AbortMessageManagerException: Unexpected error; inform your system administrator - (class: com/sap/cms/pcs/conf/core/plugin/DefaultTrack, method: readTrackConfiguration signature: (Ljava/lang/String;Ljava/lang/String;)Lcom/sap/cms/client/types/config/TrackConfigurationObject;) Incompatible object argument for function call
     at com.sap.tc.webdynpro.progmodel.controller.MessageManager.raiseMessageInternal(MessageManager.java:254)
     at com.sap.tc.webdynpro.progmodel.controller.MessageManager.raiseMessage(MessageManager.java:964)
     at com.sap.cms.ui.wl.Custom1.getConfigurationDataOfTrack(Custom1.java:10038)
     at com.sap.cms.ui.wl.Custom1.setSelectedTrack(Custom1.java:2823)
     at com.sap.cms.ui.wl.Custom1.prepareTransportStudio(Custom1.java:3585)
     at com.sap.cms.ui.wl.Custom1.wdDoInit(Custom1.java:299)
     at com.sap.cms.ui.wl.wdp.InternalCustom1.wdDoInit(InternalCustom1.java:990)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingCustomController.doInit(DelegatingCustomController.java:73)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.controller.Component.getCustomControllerInternal(Component.java:436)
     at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:374)
     at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:403)
     at com.sap.tc.webdynpro.progmodel.context.MappedAttributeInfo.initAttributeMapping(MappedAttributeInfo.java:319)
     at com.sap.tc.webdynpro.progmodel.context.MappedAttributeInfo.init(MappedAttributeInfo.java:278)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initAttributes(NodeInfo.java:674)
     at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:238)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:659)
     at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:539)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:397)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:554)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:421)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:130)
     at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:41)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.displayToplevelComponent(ClientComponent.java:135)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:404)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:618)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
I have some development to move through today as part of aproject, but we cannot due to this.
I have checked that the Data in ExchangeProfile is correct. No users are locked. I have started the CBS applications not started in Java Admin Console.
It worked before upgrading to SP19 (from 15).

Hi,
I hope, please try this error in SAP Notes
like
Note 907721 - "Web Dynpro Client" missing in SAP GUI 6.40
similar Note 843804 ,
Regards
Chilla..

WBEM SDK - Mapping CIM Object to XML

Hi all !
In Sun WBEM SDK such classes as CIMClass, CIMProperty, CIMInstance have
methods toXML(.....).
Where can I find specification, used for CIM-to-XML mapping in Sun WBEM SDK?
I will appreciate any assistance you might be able to offer me.
Thank you in advance for your attention.
Please, mail me on [email protected]
Sincerely yours,
Ihor Krivenchuck

To construct an object from XML, builder pattern looks like a good option. Here is a quick design
public class XMLCoder{
public static Object decode(InputSream in, XMLBeanMapper xm) throws some_exception_if_ASM_object_is_in_inconsistent_state {
public static void encode(OutputStream out, XMLBeanMapper){
public class BeanProperty{
private String name;
priavte String value;
.. cons,accessors and muatators ...
public interface XMLBeanMapper{
public void setProperty(BeanProperty bp);
public Object getObject() throws some_exception_if_ASM_object_is_in_inconsistent_state ;
public BeanProperty getNextProperty();//returns null if no more property needs to be converted to xml
for each class that needs conversion to and from XML, you need a XMLBeanMapper class.
XMLCoder.encode parses XML, creates a BeanProperty from each element and calls setProperty of XMLBeanMapper. The XMLBeanMapper calls necessary method of your ASM object to set the value. When it is done with parsing the xml document, it calls the getObject on the XMLBeanMapper and returns the object or throws exception if needed.
XMLCoder.decode keeps calling the getNextProperty unless it returns null. It writes necessary xml element from the data provided by the BeanProperty instance.
Depending on how complex your xml is you will probably need to change the BeanProperty class to keep the XMLcoder generic. For example to handle child elements, you may chain BeanProperty instances, or if the XML may have arbitrarily more information for a property than a name-value pair, you may need to use a hashtable.
Benefits:
You have a generic class to parse XML
The unique XmlBeanMapper implementation for each ASM type will be pretty simple. You can have a generic XmlBeanMapper implementation when the xml elements contains the name of the method
Disadvantages:
You need to write and maintain a XMLBeanMapper implementation for each type of ASM class.

Performance Issues during Upgrade of EBS from 11.5.10.2 to 12.1.1

Hi,
We're upgrading our EBS , from Rel 11.5.10.2 to 12.1.1.
We're stuck , while running script ar120bnk.sql (ran more than 20 Hours) :
Regarding the tables involved in this Process :
select owner , table_name,num_rows,last_analyzed,sample_size
from dba_tables
where table_name in
'RA_CUSTOMER_TRX_ALL',
'RA_CUST_TRX_LINE_GL_DIST_ALL',
'XLA_UPGRADE_DATES',
'AR_SYSTEM_PARAMETERS_ALL',
'RA_CUST_TRX_TYPES_ALL',
'RA_CUST_TRX_LINE_GL_DIST_ALL',
'XLA_TRANSACTION_ENTITIES_UPG')
AR RA_CUSTOMER_TRX_ALL 55,540,740 04/02/2012 12:41:56 5554074
AR RA_CUST_TRX_LINE_GL_DIST_ALL 380,513,830 04/02/2012 13:54:12 38051383
AR RA_CUST_TRX_TYPES_ALL 90 04/02/2012 14:04:54 90
AR AR_SYSTEM_PARAMETERS_ALL 6 04/02/2012 12:19:49 6
XLA XLA_UPGRADE_DATES 4 05/02/2012 17:12:57 4
As you can see: RA_CUST_TRX_LINE_GL_DIST_ALL is more tan 380 million rows !
and RA_CUSTOMER_TRX_ALL is more than 55 million rows.
We have more huge tables in the AR schema , and we would like to know if we are unique customer
with huge AR schema objects , and if NOT how come that we are getting stuck on threed statment in
AR schema.
Bellow an output of all the objects that have more than 10 million rows in AR schema :
select owner , table_name,to_char(num_rows,'999,999,999') ,last_analyzed
from dba_tables
where owner = 'AR'
and num_rows > 10000000
order by num_rows desc nulls last
AR AR_DISTRIBUTIONS_ALL 408,567,520 04/02/2012 11:49:57
AR RA_CUST_TRX_LINE_GL_DIST_ALL 380,513,830 04/02/2012 13:54:12
AR MLOG$_AR_CASH_RECEIPTS_ALL 310,777,690 04/02/2012 12:30:33
AR RA_CUSTOMER_TRX_LINES_ALL 260,211,090 04/02/2012 13:30:26
AR AR_RECEIVABLE_APPLICATIONS_ALL 166,834,930 04/02/2012 12:16:54
AR MLOG$_RA_CUSTOMER_TRX_ALL 150,962,980 04/02/2012 12:33:23
AR AR_CASH_RECEIPT_HISTORY_ALL 145,737,410 04/02/2012 11:40:31
AR RA_CUST_TRX_LINE_SALESREPS_ALL 130,287,580 04/02/2012 14:03:54
AR AR_PAYMENT_SCHEDULES_ALL 108,652,480 04/02/2012 12:05:32
AR RA_CUSTOMER_TRX_ALL 55,540,740 04/02/2012 12:41:56
AR AR_CASH_RECEIPTS_ALL 53,182,340 04/02/2012 11:29:53
AR AR_DOC_SEQUENCE_AUDIT 52,865,150 04/02/2012 11:52:46
AR RA_MC_TRX_LINE_GL_DIST 17,317,730 04/02/2012 14:05:18
AR AR_MC_DISTRIBUTIONS_ALL 13,037,030 04/02/2012 11:53:35
AR AR_MC_RECEIVABLE_APPS 12,672,050 04/02/2012 11:53:57
AR AR_TRX_SUMMARY 12,457,560 04/02/2012 12:20:16
AR RA_CUST_RECEIPT_METHODS 11,105,750 04/02/2012 13:35:38
AR HZ_ORGANIZATION_PROFILES 10,271,640 04/02/2012 12:24:44
How to Upgrade AR tables whith Huge amount of Datas ( > 50 Millions Rows ) ?

Hi,
Dont worry, you are not the only one even we have one customer whose AR_DISTRIBUTIONS_ALL table is 80 GB now and i can even do select count(*) for this table.
We had to keep this much data for business requirements, but i wonder if this is a bug or users mistake.
Due to this we are facing seruios performance issues for AR reports and raised SRs but no resolution yet. And this guy who is assigned to us is reall ynot been helpful to fix the issue.
Although we did not upgrade for this customer, but we migrated from 11.5.9 to R12.1.1 by re-implementation. But all these increasing size of these tables happened after migration.
And i believe most of the time in your upgrade is going to building the indexes. You can ask Oracle if they can edit the driver file to skip building the indxes and rebuild them after upgrade. But again it will also take time.
Another option for you is to "Archive and Purge the data" as per chapter 10 of
11i Receivables user guide.
http://docs.oracle.com/cd/B25284_01/current/acrobat/115arug.zip
Thanks
Edited by: EBSDBA on Feb 8, 2012 10:04 PM

My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

Hi candy, glad that you found that Shockwave Flash Object, it works with the Flash files and is very important
The NPSWF files that you said are not there, those are for the Firefox browser or Chrome or some other browser. If you use Firefox and want the Flash Player for that, then close all of your browsers so you are only looking at your Desktop.
Click on this Flash Player Installer for Firefox and SAVE it to your Desktop. Then RUN it from your Desktop, and after it is finished Installing, Restart your computer.
Then Using Firefox go to the plug-ins and find a SWF vs 10.0.45.2 and make sure it is Enabled. This is just like the Shockwave Flash Object for Internet Explorer, but it is the one that works with Firefox.
Let me know if that is what you wanted to do. If you don't use Firefox, but Chrome or another browser, then this will work for that one also.
If you don't use another browser, then don't do any of this. I just thot maybe you did and that is why you were concerned that the NPSWF files were not there.
Thanks,
eidnolb

Migration tool for migrate MII objects from 11.5 to 12.1

Hi All,
We can use any of the tools SP01/02/03/04 for migrate MII objects from 11.5 to 12.0.
Our requirement is to migrate MII objects from 11.5 to 12.1.
Can we use the same tool to accomplish our requiremnt ? Or is there any other tool for this?
Please suggest me on this.Thanks in advance.
Regards,
Manisha

Thanks Jamie.I got it.upgrade guides located at http://service.sap.com/instguides -> SAP Business Suite Applications -> SAP Manufacturing -> SAP MII.
Thanks,
Manisha

Unlock objects from transport requests

Hi Gurus
I was doing the SAP_Basis support pack upgrade, in netweaver 7.1 and many of the objects seems to be locked in transport requests. as my understanding, i have two options only,
1. replease transport - but it can create issues to us, as that will automatically imported to the next system in teh landscape, so unwanted requests will move to QAs system
2. unlock objects from transport request.
So i did the second option, but it had a message that it can create inconsistencies in the system, do u know what all the meassures we need to take, if we unlock objects from the transport requests. Is it required to delete the transport requests,
by mistake , if someone releases the that transport, whether it will release the old object or the new object.
Please suggest what would be the best recomended approch by SAP
Bijoy Babu

Hi Bijoy,
Its better to release the TR and then delete the same from the queue before it is imported into the following system. This will avoid any inconsistancy when the TR released after the SP application.
Regards,
Varadhu

What is the impact of upgrading jdbc drivers from 9.2 version to 10g driver

Hi,
My application is built on Oracle 9.2 with 9.2 version jdbc drivers.
To use Java objects mapping with Oracle object TYPES (for ex. STRUCT),
I had to go for 10g jdbc drivers. Otherwise, I am getting an error:
java.sql.SQLException: Non supported character set: oracle-character-set-178
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:210)
at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:829)
at oracle.sql.CharacterSetUnknown.failCharsetUnknown(CharacterSetFactory
Thin.java:150)
at oracle.sql.CharacterSetUnknown.convert(CharacterSetFactoryThin.java:1
14)
at oracle.sql.CHAR.<init>(CHAR.java:109)
at oracle.sql.CHAR.<init>(CHAR.java:133)
at oracle.jdbc.oracore.OracleTypeCHAR.toDatum(OracleTypeCHAR.java:143)
at oracle.sql.StructDescriptor.toOracleArray(StructDescriptor.java:385)
at oracle.sql.StructDescriptor.toArray(StructDescriptor.java:560)
at oracle.sql.STRUCT.<init>(STRUCT.java:95)
at oracle.sql.OracleSQLOutput.getSTRUCT(OracleSQLOutput.java:95)
at oracle.sql.STRUCT.toSTRUCT(STRUCT.java:328)
at oracle.jdbc.driver.OraclePreparedStatement.setObject(OraclePreparedSt
atement.java:2025)
at oracle.jdbc.driver.OraclePreparedStatement.setObject(OraclePreparedSt
atement.java:2148)
I would like to hear from you that, what is the impact on the existing application if I upgrade
jdbc drivers from 9.2 version to 10g version?
Please do mention all the impact.
Vyshu

JDBC 10g works just fine against 9.2 database. See the interopeability matrix on the JDBC portal http://www.oracle.com/technology/tech/java/sqlj_jdbc/index.html
Kuassi - blog http://db360.blogspot.com/

Migrate objects from ALUI 6.0 to WCI 10g?

Is it possible to use the migration tool to export objects from an ALUI 6.0 portal and import them into a WCI 10g portal?

No, migration needs to happen between same versions. You'll need to upgrade your first 6.0 instance to 10g then migrate objects from there to your other 10g instance.

Upgrading CIM objects from 6.30 to 6.40

Similar Messages

Maybe you are looking for