Upgrading ebs database from 10g to 11g
Hi,
By following Interoperability Notes Oracle EBS 11i with Oracle Database 11gR2 (11.2.0.1) [ID 1265268.1]
i am doing a test upgrade.
As part of upgrade, only the oracle home location is changed. sid, host and port all are same as previous.
After running dbua, for autoconfig, changing the OH path in xml file and run autoconfig is fine? or any other steps are needed?
Thanks,
Kavitha
Hi,
Could you please tell us which step you are refering to in the document. During upgrade you do not have to change the ORACLE HOME any where in XML file
But you need to run perl adbldxml.pl
As mentioned in step 22 of "Interoperability Notes Oracle EBS 11i with Oracle Database 11gR2 (11.2.0.1) [ID 1265268.1]"
On application tier
Source the env file
$$ADPERLPRG $AD_TOP/bin/admkappsutilpl
Copy appsutil.zip to $ORALCE_HOME/.
Unzip –o appsutil.zip
cp –r $11g oracle home <which came with rapidwiz> $ORACLE_HOM/appsutil/jre
On the database tier
Source database env file
Export JRE_TOP=$ORACLE_HOME/appsutil/jre
$cd $ORACLE_HOME/appsutil/bin
$perl adbldxml.pl
$sh adconfig.sh
Thanks
Edited by: user11970143 on Aug 26, 2011 6:22 PM
Similar Messages
-
Facing Parse Errors after upgrading database from 10g to 11g
Hi,
We are facing parse errors in the SQL's after upgrading database from 10g to 11g.
Kindly look into below parse errors.
********************************** Parse Error *****************************************************
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Tue Aug 13 14:13:10 2013
kksfbc 16173533: parse err=942 hd=3c387c4028 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
Select feature from toad.toad_restrictions where user_name=USER or user_name in ( select ROLE from sys.session_roles)
kksfbc 16173533: parse err=942 hd=3c97d83648 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT password
FROM SYS.USER$
WHERE 0=1
kksfbc 16173533: parse err=6550 hd=35185e4278 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object line object
handle number name
319e277050 30 anonymous block
319e277050 57 anonymous block
PARSE ERROR: ospid=29813, error=6550 for statement:
BEGIN sys.dbms_profiler."146775420110782746251362632012"; END;
kksfbc 16173533: parse err=942 hd=3c142d8600 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object line object
handle number name
319e277050 67 anonymous block
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT 1 FROM plsql_profiler_data WHERE 0 = 1
Please help.
Regards
SureshHi Suresh,
Apologies for misunderstanding..
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Assuming you see the above error message in the alert log file, which was your original post, follow the below steps:
1 Get the 'ospid' value from the error
2. Issue the below command:
SQL> select request_id,ORACLE_PROCESS_ID
2 from fnd_concurrent_requests
3 where request_id = 15598;
3. After obtaining the request_id
4, Query it from the front-end using SYSADMIN responsibility
Hopefully this should get you the respective concurrent report/program.
Thanks &
Best Regards, -
Issues after upgrading the Obiee from 10g to 11g
Hi all,
We have recently upgraded our rpd from 10g to 11g. And a part of Webcatlog is being upgraded. We observe issues with the upgraded reports.
As the for the report prompts the script was taking lot of time. And the browser pop's a message either to 'stop' or 'continue'.
The report is taking lot of time to run than the usual 10g environment. And the path BP1 is also applied for the 11g environment.
Please suggest a troubleshoot method to overcome the issues with the upgraded reports.
Thank you,
Chris.Check this pdf file
http://www.rittmanmead.com/files/biforum2012/ranka_performance.pdf
If helps pls mark -
Migrating database from 10g to 11g
Hi gurus,
how we can migrate the database from 10gr2 to 11gr2 using rman.
thank you!Pl see these MOS Docs
Upgrading Database Version Online Using Streams and RMAN [ID 782444.1]
RMAN Restore of Backups as Part of a Database Upgrade [ID 790559.1]
The recommended method is to use DBUA as outlined in the link posted above
HTH
Srini -
.Database upgrade from 10g to 11g in Oracle EBS 11i
Hi,
An urgent help is needed.I am upgrading Oracle Database from 10g to 11g.My EBS is version 11i.So after upgrading my database
from 10g to 11g as sa sanity check what are the parameters we need to take care of the EBS.My point is will there be any Application level changes if the database
is upgraded?Wiill the Workflow and what other things we had to do the sanity check if its working properly?Any Concurent Program level changes be affected?
Thanks and Regards
Edited by: 918308 on May 10, 2013 7:52 PM918308 wrote:
Hi,
Thanks for the info provided but i dont have the metalink id.Kindly can you provide me the link for the subjected docs so that i can relate.Any application level testing to be done?Concurrent Programs,Schedule Manager,Workflow etc.?We cannot post the contents of MOS docs since this violates Oracle support agreement policy.
You need to go a regular sanity check (i.e. submit concurrent programs, check workflow functionality, ..etc) -- E-Business Suite Diagnostics 11i Test Catalog [ID 179661.1]
Thanks,
Hussein -
Check list for upgrading from 10g to 11g when there is a schema replication
Hi
We are looking to upgrade one of our production database from 10g to 11g
Currently this database has one schema that is replicated to 2 other databases using Oracle streams.
The replication is excluing DDLs and excluding several other application tables.
What should I do pre and post the upgrade ?
should we remove the stream configuration all together and rebuild it after the upgrade ?
I was hoping that we can first upgrade the two target databases to 11g and then the source database, without impacting our streams configuration at all
Is that possible ?
Is there any documentation on the subject ?
thanks in advance
OrnaPl post the OS versions of the source and target servers, along with exact (4-digit) versions of "10g" and "11g". I do not have any experience with streams, but the 11gR2 Upgrade Doc suggests that you upgrade the downstream target databases first before upgrading the source - http://download.oracle.com/docs/cd/E11882_01/server.112/e10819/upgrade.htm#CIAFJJFC
HTH
Srini -
Hi,
I am going to upgrade CRS from 10g to 11g. Can i upgrade CRS only from 10g to 11g?
Thanks,user2017273 wrote:
Hi,
I am going to upgrade CRS from 10g to 11g. Can i upgrade CRS only from 10g to 11g?
Thanks,You mean 11gR1, right?
If yes.. you can... Oracle Cluser version must >= Database Software. -
Migrating with RMAN from 10g to 11g
Hi gurus,
I am following the following procedure to migrate database from 10g to 11g using rman
Source side:
RMAN>connect target
RMAN>backup database;
RMAN>backup archivelog all;
RMAN>backup current controlfile;
SQL> create pfile from spfile;
Copied datafile, archivelog backup files and pfile and password files to target side. i.e. on 11g server side
Target side:
Set proper parameters for 11g
SQL>startup nomount;
RMAN>connect target
RMAN>set dbid=<source database id>
RMAN>catalog start with '<rman backup file location';
RMAN>restore controlfile;
RMAN>run
set newname for datafile 1 to '<target datafiles location with file name';
restore database;
switch datafile all;
finished
upto now it's success full when i am trying to recover
RMAN>recover database;
it is saying
rman 00571
rman 00569
rman 00571
rman 03002
ora - 19698
can you please suggest the solution for this.
thanks a lot.I'm not sure what you're doing is supported.
You are taking a 10g database and restore and recover it using 11g software.
I think you are allowed to do that with 10g software only. -
Upgrade ebs Database 10G to 11G (Os upgrade from 32 to 64)
I have to perform the following upgrade:
ebs Database 10G to 11G (Os upgrade from 32 to 64)
Any information is welcome.
Thank you in advance.
Edited by: Atanas Cholakov on Nov 19, 2012 2:27 AMPlease also see:
11gR2 11.2.0.3 Database Certified with E-Business Suite
https://blogs.oracle.com/stevenChan/entry/11gr2_11_2_0_3
Thanks,
Hussein -
Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR]
Hi Deepak/Folks,
Another question that I have is that while doing the Oracle Upgrade on an EP server, the patches were not installed properly and I had to shut down the Patches installation after it did not do anything for a while.
Now when I try to install the patches it fails telling me that the Installed patches cannot be verified, I had written to SAP and they told me to follow the
SAP note 1862446 - Inventory
load failed... OPatch cannot load inventory for the given Oracle Home
and re-create the oracle inventory.
This has also not helped in anyway.
Is there a solution to this problem.
Following is the error that I am getting when I try to Install the patches
Getting pre-run patch inventory...
Getting pre-run patch inventory...failed.
Cannot get pre-run patch inventory.
Refer to log file
$ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-14-52-51.log
when I open the log file specified here I get the following
more mopatch-2014_08_06-14-52-51.log
more /oracle/<SID>/11203/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
MOPatch - Install Multiple Oracle Patches in One Run - 2.1.15.
Copyright (c) 2007, 2013, Oracle and/or its affiliates. All rights reserved.
Version: 2.1.15
Revision: 5.1.2.26
Command-line: /oracle/<SID>/11203/MOPatch/mopatch.sh -v -s SAP11203P_1312-20009978.zip
Oracle Home: /oracle/<SID>/11203
RDBMS version: 11.2.0.3.0
OPatch version:11.2.0.3.3
Clean-up: supported
PSUs: supported
Log file: $ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
Patch base: .
Patch source: SAP11203P_1312-20009978.zip
Link script: ./link.mts<SID>ua.sh
Readmes: <none>
Strpd. Readmes:<none>
make utility: /usr/ccs/bin/make
unzip utility: /oracle/<SID>/11203/bin/unzip
User name: ora<SID>
Working dir: /oracle/stage
System: HP-UX mts<SID>ua B.11.31 U ia64 2468369872 unlimited-user license
Disk free: 11734549 KBytes on /oracle/<SID>
Disk required: 886496 KBytes on /oracle/<SID>
Getting pre-run patch inventory...
executing: "/oracle/<SID>/11203/OPatch/opatch" lsinventory -retry 0 -xml "./mopatch-187-21696-tmpdir/preinv.xml"
========================================================
GENERIC OPATCH VERSION - FOR USE IN SAP ENVIRONMENT ONLY
========================================================
Oracle Interim Patch Installer version 11.2.0.3.3
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home : /oracle/<SID>/11203
Central Inventory : /oracle/<SID>/oraInventory
from : /oracle/<SID>/11203/oraInst.loc
OPatch version : 11.2.0.3.3
OUI version : 11.2.0.3.0
Log file location : /oracle/<SID>/11203/cfgtoollogs/opatch/opatch2014-08-06_15-01-56PM_1.log
List of Homes on this system:
Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
Possible causes are:
Oracle Home dir. path does not exist in Central Inventory
Oracle Home is a symbolic link
Oracle Home inventory is corrupted
LsInventorySession failed: OracleHomeInventory gets null oracleHomeInfo
OPatch failed with error code 73
Getting pre-run patch inventory...failed.
Cannot get pre-run patch inventory. Exiting.
I would appreciate if you folks can help me out on this
Thanks
APSFOLLOW UP QUESTION BRANCHED:
Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR] -
Images after upgrade from 10g to 11g
We recently upgraded from 10g to 11g and all the images are broke in the dashboard.
Can anyone provide the steps needs to be done in order to fix the broken images?
Thanks.Put image files at
Drive:\Oracle\Middleware\Oracle_BI1\bifoundation\web\app\res\s_blafp\images
Drive:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\bi_server1\tmp\_WL_user\analytics_11.1.1\7dezjl\war\res\s_blafp\images
If required
Drive:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\tmp\.appmergegen_1291264099332\analytics.ear\ukjjdc\res\s_blafp\images
Call them using fmap
Syntax: fmap:images/imagename.imageformat
for e.g: fmap:images/geograph.jpg
Pls mark correct/helpful if helps -
Error after upgrading BI Publisher report from 10g to 11g
Hi All,
I have migrated the BI Publisher from 10g to 11g. The upgrade was done using the upgrade assistant and the installation process was a success.
However whenever I try to access the reports in 11g after migration I get the following error:
oracle.xdo.servlet.CreateException: Data Model definition not found:/dlypurge.xdm.
I have tried modifying the .xdo to include the following:
<dataModel url="/RMS/dlypurge/dlypurge.xdm"/> where dlypurge is one of the reports. However in the BI Publisher does not seem to access the latest .xdo file.
Any suggestions on how to rectify the error.
Sanchita ChakrabartyHi All,
I have migrated the BI Publisher from 10g to 11g. The upgrade was done using the upgrade assistant and the installation process was a success.
However whenever I try to access the reports in 11g after migration I get the following error:
oracle.xdo.servlet.CreateException: Data Model definition not found:/dlypurge.xdm.
I have tried modifying the .xdo to include the following:
<dataModel url="/RMS/dlypurge/dlypurge.xdm"/> where dlypurge is one of the reports. However in the BI Publisher does not seem to access the latest .xdo file.
Any suggestions on how to rectify the error.
Sanchita Chakrabarty -
ODI Procedures not working after upgrading from 10G to 11G
Hello Gurus,
We have run into a scenario where the procedures in ODI are not working after we upgraded it from 10G to 11G (11.1.1.6). However we can make it to run if we create the procedure from scratch.
Also we are having issues related to packages where in the packages were running before we applied the patch 11.1.1.6.3. And after applying the patches they are not running.
Any help will be appreciated.
ThanksIf you want someone to help you, please be elaborate in the exact errors you are getting.
A general statement would do nothing but guess work.
What is the error that you get while executing the procedure.
What are the exact issues that you get while executing packages ? -
Unable to Sign in analytics After Upgraded obiee from 10g to 11g
Hi all,
I have problem when upgrading catalog from 10g to 11g.
The error is:" Unable to Sign In . An invalid User Name or Password was entered. "
I upgraded following the steps like this:
1.Login EM and check BI server is running successfully.
2.Started the UA.bat.
Select the operation:Upgrade Oracle BI RPD and Web Catalog.
Step by Step,and the upgrade completed successfully.
3.Open the RPD online using the Admintool succefully.
4.But when I Login the BI and view the dashboard with the 10g's user (Administrator),the page appear the error "*Unable to Sign In . An invalid User Name or Password was entered.* "
5.Then I Try to Regenerating User GUIDs
1. Update the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter in NQSConfig.INI:
a. Open NQSConfig.INI for editing at:
b. ORACLE_INSTANCE/config/OracleBIServerComponent/coreapplication_obisn
c. Locate the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter and set it to YES, as follows:
d. FMW_UPDATE_ROLE_AND_USER_REF_GUIDS = YES;
e. Save and close the file.
2. Update the Catalog element in instanceconfig.xml:
a. Open instanceconfig.xml for editing at:
b. ORACLE_INSTANCE/config/OracleBIPresentationServicesComponent/
c. coreapplication_obipsn
d. Locate the Catalog element and update it as follows:
e. <Catalog>
f. <UpgradeAndExit>false</UpgradeAndExit>
g. <UpdateAccountGUIDs>UpdateAndExit</UpdateAccountGUIDs>
h. </Catalog>
i. Save and close the file.
3. Restart the Oracle Business Intelligence system components using opmnctl:
4. cd ORACLE_HOME/admin/instancen/bin
5. ./opmnctl stopall
6. ./opmnctl startall
7. Set the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter in NQSConfig.INI back to NO.
Important: You must perform this step to ensure that your system is secure.
8. Update the Catalog element in instanceconfig.xml to remove the UpdateAccount GUIDs entry.
9. Restart the Oracle Business Intelligence system components again using opmnctl:
10. cd ORACLE_HOME/admin/instancen/bin
11. ./opmnctl stopall
12. ./opmnctl startall
BUT THE ERROR ALSO EXISTING!
So,waiting for the help,thanks!Hi,
if your using oracle db please make sure your db settings and tnsnames.oRA settings
also try you please try below troubleshooting steps:
1) please check latest error message and find the root cause,
presentation catalog log path:
obiee installed Drive:\Oracle\Middleware\instances\instance1\diagnostics\logs\OracleBIPresentationServicesComponent\coreapplication_obips1\sawlog0.txt file
also check it nqserver.log file
oracle bi server log path ref:
obiee installed Drive:\Oracle\Middleware\instances\instance1\diagnostics\logs\OracleBIServerComponent\coreapplication_obis1\nqserver.log
2)can you try to login RPD,EM and console by using your weblogic a/c then try to login with some other user.
if its not working then try to delete that users from catlog and check it Check OPMN services are running state.
e.x:
C:\Oracle\Middleware\instances\instance1\bin>opmnctl startall
opmnctl startall: starting opmn and all managed processes...
C:\Oracle\Middleware\instances\instance1\bin>opmnctl status
Processes in Instance: instance1
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
coreapplication_obiccs1 | OracleBIClusterCo~ | 4992 | Alive
coreapplication_obisch1 | OracleBIScheduler~ | 2420 | Alive
coreapplication_obijh1 | OracleBIJavaHostC~ | 1856 | Alive
coreapplication_obips1 | OracleBIPresentat~ | 5684 | Alive
coreapplication_obis1 | OracleBIServerCom~ | 5232 | Alive
3) Refresh GUIDs and Restart WebLogic and OPMN Services then try it again...still if your getting same issues then try to
check DB(try to login and confirm) and check it RPD --> physical layer connection pool setting and try to
view physical data.
also paste it your latest error log message (nqserver.log and sawlog01.log message) here
THanks
Deva -
Cannot find dashboard and reports after upgrading rdp from 10g to 11g OBIEE
Hi all
I am trying to upgrade from OBIEE 10g to 11g. These two products are installed on different servers. I have followed the guide: http://www.oracle.com/technetwork/issue-archive/2011/11-jul/o41bi-402913.html and everything seems to work fine.
So i have taken a copy of rdp from the server where was installed OBIEE 10g and took it in the server where OBIEE 11g is installed.
Ran the upgrade tool and upgrade finished successfully. Restarted the BI Servers in core application on Enterprise Manager.
Now when i access the upgraded rpd, the layers and the fields are fine but I cannot find all the reports and dashboards that i had created.
Am I missing any upgrade steps?
Please suggest
Thank you and best regardsHi Deepak,
Thanks for your response.
Oracle also came back to me and looks like my method is not valid:
Hi Jim,
Thanks a lot for the information. First of all I would like to inform you that upgrade CANNOT be performed across two machine. So, if 10g installation is on Host A, then upgrade to 11g will be on Host A.
So, in your scenario this is what you can do:
1. On Host A running Forms/Discoverer 10g on Windows 2003, install Forms/Discoverer/Reports 11g (11.1.1.6.0)
2. Run the upgrade Assistant to perform the upgrade from 10g to 11g.
3. Now upgrade OS of Host A to Windows 2008
In short, I would like to inform you that upgrades across machines does not work. Source instance which is 10g and destination instance which is 11g must exist on same box.
Here is the documentation which you can follow:
http://docs.oracle.com/cd/E23943_01/upgrade.1111/e10130/toc.htm
(Oracle® Fusion Middleware Upgrade Guide for Oracle Portal, Forms, Reports, and Discoverer)
11g Release 1 (11.1.1)
Let me know if you have any further questions.
Thanks,
Rishi
Maybe you are looking for
-
How to Create Pop-up in ActionScript 3.0
Hi, Suppose, we have an object on the stage(say Rectangle/Circle, Movieclip, Button,etc.,). When we click on this object using mouse, Then it should display some information in a pop-up(say Click event occured on specific object being clicked(viz., R
-
Unbreakable Linux on a Stripe and Mirror Raid
Hi all I was wondering if there is any best practice with respect to the placement of the Linux OS executables on Raid storage. We have a 12 x 500gb disk storage unit and intend to stripe and mirror everything giving a total of 3 terrbytes. I was con
-
Why is the sound wavy only through itunes?
Whenever I play my songs through itunes on the computer, the sound is really wavy! When I play the songs on my ipods they sound just fine. Cd's also sound just fine when I play them through the computer.
-
Flex and the cold fusion wizard
I am trying to use the cold fusion wizard in Flex 3. What must be set up before you can use this? I know what the wizard does, but I don't understand what is needed or going on in the background in order to get it to work properly. I have a msql tabl
-
My screen blacks out during phone use.
Wondering if anyone else has had this issue ...yet. Started on Friday 1/20 while watching a you tube video, thought it was going through a random reboot. Screen barely powered on while trying to fix then randomly starts back up. Happened again Satur