Upgrading Elements 9 with Camera Raw 6.5 a failure

Have tried the update as suggested by Barbara B.  A complete failure. 
Rebooted the computer many times and each attempt says that the update failed.
Checked my registration for multiple computers  -  all okay.
This is completely frustrating.....

It's better to keep this all in one thread to avoid confusion, so let's go back to your other one.

Similar Messages

  • I just installed elements 11 with camera raw 7.1. My  photos from iPhoto will not open in camera raw

    I just installed elements 11 with camera raw 7.1 in my iMac. My raw photo files from iPhoto will not open in camera raw. The elements screen opens without a photo, but camera raw willnot open. Help.

    You need to tell iphoto to send raw files out of iphoto or it will make its own conversion and send a pre-converted file. Go to the iphoto preferences>advanced and turn on this checkbox:

  • Updating Elements 9 with Camera Raw 6.5

    I updated Elements version 9 with camera raw 6.5 but it still won't open NEF files from my Nikon D7100.  The read me file says it should support this camera.

    Adobe Camera Raw 7.4 was the first to support D7100 RAW files
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    ACR 7.4 will only work on Elements 11 and higher
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    Your other option is to convert your NEF files to DNGs using the free DNG converter then edit the DNGs in Elements 9
    http://www.adobe.com/products/photoshop/extend.displayTab2.html

  • My understanding was that Elements shipped with Camera Raw 6.6 which included the Adjustment Brush

    I have bought Elements 10 and updated the Camera Raw to 6.6 but the Adjustment Brush & Graduated Filter do not appear in the Toolbar of the Workspace.
    Emlyn

    Adobe Camera Raw differences between Photoshop and Photoshop Elements

  • Elements 9 -Update Camera Raw

    Failure to update Elements 9 with Camera Raw 6.7.  Error U44M1P7

    You're welcome.  If you're wanting the ACR update because of a new camera that you need to support, you can always use the DNG converter:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5375
    to convert the files for use in PSE9's ACR editor.
    Ken

  • PSE 10 from Apple Store problem with camera raw 6.7 upgrade

    PSE 9 was not opening Nikon d4 raw files so I've purchased PSE 10 at the Apple Store and installed on my Mac. PSE 10 is still not opening d4 raw files (camera raw 6.5). I tried to update to 6.7 taken from Adobe but did not succeed to install it. Could you please advice what to do?

    Thanks for your help. It works !!!
    Bartek A
    Wiadomość napisana przez Barbara B. w dniu 17 maj 2012, o godz. 00:34:
    Re: PSE 10 from Apple Store problem with camera raw 6.7 upgrade
    created by Barbara B. in Photoshop Elements - View the full discussion
    You will have to do the update manually for the app store version. Instructions are here:
    http://forums.adobe.com/message/4106477
    (that's for 6.6 but the steps/file paths are the same for 6.7)
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4414265#4414265
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4414265#4414265. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Problems with Camera Raw 6.7 after upgrading to OS 10.8

    I've been using Photoshop CS 5 with Camera Raw 6.7 on my MacBook Pro with no issues until I recently upgraded to OS 10.8. Now my Canon CR2 files (shot with a Canon G15) won't open.  Does anyone know of a solution or work-around for this problem? 

    thanks for the prompt response...i appreciate it.  according to the link you listed, that's correct.  the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
    so it's clearly an issue related to the "upgrade" of the os.  seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it!  thanks again.

  • Just upgraded to 10.8.4 and now can't open canon raw files in photoshop cs5 with camera raw plug in 6.7

    i've just upgraded to os 10.8.4 and now i can't open canon raw files in photoshop cs5 with camera raw plug in 6.7 which worked perfectly prior to the upgrade....anyone else encountered this issue?

    Adobe's software is a mess in terms of the fact that it's sprayed all over the place and may not survive an OS upgrade.  Try reinstalling Photoshop CS5.

  • Problem with Camera Raw update in Elements 11

    I need to update the raw plug-in in elements 11, but when I go to the update section, I just keep getting an error message (which says server busy or might be prevented by firewall).  I suspect that my firewall is stopping the updates, but I don't know how to over-ride this.  Can anyone explain it please?  (I have managed to 'allow' certain things on the firewall, but for this update, I don't know what I'm looking for to 'allow'!

    I know nothing about Photoshop Elements. But, according to this list, Photoshop Elements can only work with Camera Raw through version 8.0.
    Camera Raw-compatible Adobe applications

  • Have PS6 with Camera Raw 7.0 Unable to open Canon 5D Mark III  files. SNo support or upgrade availab

    Have PS6 with Camera Raw 7.0 Unable to open Canon 5D Mark III  files. SNo support or upgrade available on the site but 6.7 upgrade.!Please advise

    http://labs.adobe.com/technologies/cameraraw7-1/

  • Pb with Camera raw 6.6 installer on Element 10 editor for mac

    Hello i cannot intall the Camera raw 6.6 updater on my PS element 10 editor (from Apple Store)
    The patch installer told me thet the patch cannot be applicated. Why ?
    Any way to change that. May I install in a different way ?
    Regards
    Christophe

    I 've done it. Its works (the way as described) even with the new ACR 6.7 CR.
    Many thanks
    Christophe DOUMENC
    [email protected]
    mob : +33 (0)6 2422 3232
    Le 6 mars 2012 à 18:52, 99jon a écrit :
    Re: Pb with Camera raw 6.6 installer on Element 10 editor for mac
    created by 99jon in Photoshop Elements - View the full discussion
    See this thread Christophe
    http://forums.adobe.com/message/4106477
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4248526#4248526
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4248526#4248526. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Does elements 8 support camera raw?

    I am debating whether to upgrade my cs3 photoshop to cs4 or to purchase the less expensive elements 8. My biggest concern is whether or not elements 8 supports camera raw and does it have the same tools within camera raw that cs4 has. I really do not want to break the bank on photoshop cs4 or 5, but don't want to spend the money on elements to later realize that I may want more out of it. I am just a photo enthusiast right now, but plan on expanding my hobby in the near future.

    Hi,
    Yes, you would have Camera RAW in PSE 8 with all basic edits. Some options would not be available which are there in Photoshop howver.
    You can try using a trial version of Elements 8 to decide if the options are of good use to you.

  • How do I upgrade elements 10 to open raw files from my Canon 70d?

    How do I upgrade elements 10 to open raw files from my canon 70d?

    Normally, if there are any updates for your version of PSE then they should be offered to you automatically.  However, you can also check if there are any new updates by going to:
    Help >> Updates
    If your camera is relatively new then even by getting the updates you may not be able to edit raw files from the new camera because old versions of PSE are normally not updated as soon as the new version hits the market.  We are currently at version 13 so version 10 was stopped long time ago.  However, you can see a workaround at this link where I posted a video to get things moving:
    <Why can't I open my RAW files from my Nikon D7000 ?? I can open RAW files from my old Nikon D70's but not my D7000...>
    Hope this helps.

  • Photoshop Elements 8 and Camera Raw

    I have Elements 8 installed on my Dell notebook (INSPIRON mini) I have installed the Camera Raw 5.5 plug-in and I am using a Nikon D90 camera.
    The plug-in has been installed in "Program files/Adobe/Photoshop Elements 8/Plug-Ins/File Formats/ and the file name is Camera Raw.8BI
    Every time I click on a NEF file to load into camera raw, a window appears in Elements saying reading camera raw format and a progress bar under it, when the file has been loaded it opens up in Elements and not in Camera raw. I am now at a lose as what else I can do to correct this problem.
    Any ideas???

    1) Location of Camera Raw Plugin
    With PSE8, the file Camera Raw.8bi has been moved from
    C:\Program Files\Adobe\Photoshop Elements 8.0\Plug-Ins\File Formats
    to
    C:\Program Files\Common Files\Adobe\Plug-Ins\Elements 8\File Formats
    This is not documented in the ACR 5.5 Installation Guide yet, but PSE 8 comes with ACR 5.5 anyway.
    2) ACR not loading, but PSE Editor
    This sounds to me like the Screen Resolution Problem described here.
    Beat Gossweiler
    Switzerland

  • PSE 9 does not come with Camera Raw 6.2?

    Photosho Elements 9 does not come with camera raw 6.2
    , I downloaded the trial version which came with an outdated 6.1... the only version of 6.2 is for PSE8 and does not work with PSE9 how is this possible? How can they release a product with an outdated ACR????Now we have to wait for an update to a new product???Come on people!!!

    Cheap shot, Phil. Up to now, Mac users got no Organizer but a special bonus: full Bridge, full access to full featured ACR. With this version, both platforms get the same stuff -- it's less than full Photoshop/Bridge CS5, at a small fraction of the price.
    I admit, as a Mac user who shoots RAW, I liked the old trade-off...but I can understand the desire to make the two products consistent. If that makes PSE "inferior" for you than you should stick with Bridge CS4/Raw 5.7, or move up to the full-featured siblings, or switch to Lightroom.

Maybe you are looking for

  • Cron job help- Need to run the Autobuddy command every night...

    I have not written anything in the form of a Unix script for YEARS and YEARS. Our XServe was built in Advanced mode, currently running 10.5.4 Server. On this box, we are running Wiki and iChat. Since we built this box as an Advanced box the "Autobudd

  • I would like to add new scale quantity for a material in VK12 transaction

    I wouls like to add new scale quantity to already existed material in VK12 tcode. Here I need to  update large amount of data.For that i can use the LSMW (BDC recording) for VK12. But in the BDC recording in VK12 tcode the first selection screen was

  • Google maps are not rendering correctly. A work related site also gets messed up. I am forced to use IE.

    There is too much white space. And, things are not where they used to be. On the work related site SharePoint looks weird. There are lines around things I did not expect. Also, I have a website that I publish. It looks fine with Firefox 3.6.3, but wi

  • HELP - scrollbar

    Hi, I have a problem with an overlay: I can't apply the scrollbar on buttons. I can apply a scrollbar for a group picture. However, the touch user will roll continue all images. I'd like to just scroll to the next image, from image to image. How can

  • Console freez after install Rollup 5 for DPM 2012 R2

    Hello, first domain admin installed Update Rollup 5 for DPM 2012 R2. The DPM console freeze in "Monitoring" area in second domain admin. In first domain admin DPM console works good. Do anybody know where si problem? Thanks, Jakub