Upgrading fm CCM 1.0 to CCM 2.0

Hello gurus,
does anybody know if upgrading from CCM 1.0 to CCM 2.0 all the existing content, schema, mapping and catalogs is preserved or a reinitialization of /CCM/MASTER_CATALOG is required and everything must be created again?
I've got this doubt because in CCM 2.0 I receive error message "Error reading catalogs..." whenever I start "Edit Catalogs" transaction and cannot see any catalog there(neither /CCM/MASTER_CATALOG).
Before starting program /CCM/INITIALIZE_CME we would be sure that it's the only way to make CCM 2.0 work...
Thanks in advance for any advice you eould give.
Pierluigi

Hi
Pl see note 843867.
You will need to run /CCM/INITIALIZE_CME
Best regards
Ramki

Similar Messages

Issues after delta upgrade ccm 1.0 to ccm 2.0

Hello,
After a delta Upgrade of CCM 1.0 to CCM 2.0 SP12 i have issues that i show down below:
1º issue
I´m trying to do the upload of a schema into the master catalog for the first time but it´s not finish as show the exemple below:
Uploading catalog /CCM/MASTER_CATALOG
Name of file that was uploaded: C:Documents and SettingsadminMy Documentsexport.csv
15.09.2008 17:43:51 (UTC+1): Starting CSV import for catalog /CCM/MASTER_CATALOG
15.09.2008 17:43:52 (UTC+1): 0001 package(s) were processed OK
15.09.2008 17:43:52 (UTC+1): Package 0001 received and saved
15.09.2008 17:43:52 (UTC+1): processing of package 0001 started
15.09.2008 17:43:53 (UTC+1): catalog header data updated
15.09.2008 17:44:30 (UTC+1): 311 data types updated/created
15.09.2008 17:45:15 (UTC+1): characteristics updated; 316 updated/created; 0 deleted
2ºissues
On SAP authoring tools the options create procurement catalog, create supplier catalog and display log, they give me BSP Application Error Runtime.
3º issues
I am facing some sintax on class and they are class and methods missing.
Please can somebody help me?

For Batch jobs -- Try analyzing your database schema's referred by batch jobs. Also look if you have suff o/s resources as recommended by oracle for running Oracle 9i software.
For backups -- Check the size of your dmp file before upgradation and after upgrading to 9i. If you do not find major diff in size then it could be a resource issue like cpu usage / io / memory.
Thanks,
http://askyogesh.com

Exception /CCM/CX_MAPPING_DELETION_FAILD occurred (program: /CCM/CL_MAPPING

Dear all,
I have uploaded master catalog with full indicator.
It was uploaded .
Now while mapping the supllier catalog to master catalog the below error came.
Exception /CCM/CX_MAPPING_DELETION_FAILD occurred (program: /CCM/CL_MAPPING
Please guide me so that i can move further to publish.
Regards
Amit

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Exception /CCM/CL_PE_REQUEST_SERVICE while publishing (CCM)

Dear gurus,
We have a problem when publishing a CCM catalog. The following message appears: "The
exception occurred (program: /CCM/CL_PE_REQUEST_SERVICE====CP, Include /CCM/CL_PE_REQUEST_SERVICE====CM00F, line: 141) ".
I have checked TREX indexes and they are ok.
We have not found which is causing this problem.
I would appreciate your help.
Kind Regards,
SBonilla

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Upgrade from CCM 1.0 to SRM-MDM 3.0

At present we are using CCM 1.0 with SRM 4.0 and in the process of upgrading it to SRM-MDM 3.0 catalogs. All the internal catalogs needs to upgraded to MDM 3.0 from CCM 1.0.
Could somebody explain the steps to follow to achieve this.
Thanks for your help.

Hi,
It is not upgrading the system. It is new installation and contents migration.
1. install SRM-MDM Catalog
2. import contents
3. define views (namedsearch/mask in MDM)
Please check the SRM-MDM Catalog installation guide.
http://service.sap.com/srm-inst -> SRM Server 7.0
Regards,
Masa

CCM 2.0 upgrade problem..

Hi all,
I have upgrad CCM 1.0 to CCM 2.0. After upgrade while go to Edit catalog: Following Error was coming:
"Error when reading catalogs; error when reading master catalog".
So i ran the report: /CCM/INITIALIZE_CME. After that i am facing problem.. in performance..
It is taking long time and in SLG1 i am able to find out the log as below for each catalog:
Start the catalog conversion for catalog <Catalog name>
Reference updated in component /CCM/QUANTITY_VALUE of data type /CCM/PRICE_BASIS_QUANTITY
Reference updated in component /CCM/AMOUNT of data type /CCM/PRICE
Reference updated in component /CCM/QUANTITY_VALUE of data type /CCM/MINIMUM_QUANTITY
Characteristic /CCM/MAN_ACCEPTANCE was created
Characteristic /CCM/ORIG_CATALOG_ID was created
Characteristic /CCM/PICTURE was created
Catalog <catalog name> converted successfully.
The current version is as below:
Component version - SRM 5.00
SRM_SERVER - Release 550, Support pack level SAPKIBKT07
SAP_ABA - Release 700, Support pack level SAPKA70010
CCM - Release 200_700, Support pack level SAPK-27007INCCM
Kernel release - 700
Please help. Need solution as soon as possible.
Thanks

Hi,
Have you followed the SNOTE 843867:
The report /CCM/INITIALIZE_CME should be ran once.
Please consider the given note above.
with regards,
mahesh

CCM 2.0 standard XSD file ?

hello...
we have upgraded from CCM 1.0 to CCM 2.0.
While upgrading we are facing some issues regarding schema definition.
Becuase in CCM 1.0 we have used our custom program to convert input in to XML file using Z programs. Now these Z programs are not supporting CCM 2.0 we are getting some schema errors.
So can any one have standard XSD(XML schema defintion) file. If so please forward to [email protected]..
this would be greatful to me..
please help...

Hello..
please any update on this...
thanks
venkatesh

CCMS ALERT--- /SAPAPO/DELETE_LC_ANCHORS

Dear Experts,
How to resolve the CCMS alert for the /SAPAPO/DELETE_LC_ANCHORS which says as 'Not configured'.
Regards,
KK

Hello KK,
1.. Please pay attention:
"The /SAPAPO/DELETE_LC_ANCHORS program must not run during the upgrade or
during the download/upload procedure (see Note 632357). Otherwise, you
may experience a loss of data." - SAP note 1064405.
If you are running upgrade or migration =>
you could see "CCMS ALERT--- /SAPAPO/DELETE_LC_ANCHORS".
Check/fix it only after the upgrade/migration was finished.
2. If you are NOT running the upgrade/migration =>
    check the LCA connection settings in LC10-> Integration
   In Administration report Tab In the "Postprocessing" field of the "Initialize liveCache"
   subarea of the "Configuration of application-specific functions" area, enter the report name
    "/SAPAPO/DELETE_LC_ANCHORS" in change mode, save.
    Do NOT initialize the liveCache in LC10 after that, if it's not recommended by SAP support and it's not a brand new installation.
    Please review the SAP note 640107.
3. I recommend you to use the /n/sapapo/om13 -> check, review the red lights, click on 'i' info box & see the hints how to fix it.
    If you still have questions/problems to fix the red lights in /n/sapapo/om13 -> check
    => create the SAP message to the BC-DB-LCA component & get SAP support.
Thank you and best regards. Natalia Khlopina

Moving-Intergrating CCM/Unity 3.X cluster to 4.2 cluster

We are working on incorporating or upgrading a 3.2 cluster to 4.2. for CCM and Unity. Can we BAT the profiles User/Devices from one to the other. Also what are some of the challenges that we may encounter.

Hi James,
I'm just going to speak to the CCM question for now (pretty complicated) Just as an FYI CCM 4.2 has been announced as EoL (see below) I really like 4.2(3) but I just wanted you to know (you may already :)
End-of-Life Milestones and Dates for the Cisco Unified CallManager Version 4.2
End-of-Sale Date
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
May 15, 2008
Last Ship Date:
App. SW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
August 13, 2008
End of SW Maintenance Releases Date:
App. SW
The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.
May 15, 2009
End of New Service Attachment Date:
App. SW
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
May 15, 2009
End of Service Contract Renewal Date:
App. SW
The last date to extend or renew a service contract for the product.
August 11, 2010
Last Date of Support:
App. SW
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
May 15, 2011
End-of-Life and End-of-Sale Notices
http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_eol_notices_list.html
For a CCM 3.2 to CCM 4.2;
This type of upgrade uses a multi-step approach to migrate the data from CCM 3.2 to 4.2(3). There are different considerations depending on whether or not the Servers are being replaced etc.
Upgrading Your Cisco Unified CallManager Server (When You Are Not Replacing Hardware)
You cannot upgrade directly from Cisco CallManager Release 3.2 or earlier to Cisco Unified CallManager Release 4.2. If your server runs a version of Cisco CallManager Release 3.2 or earlier, you must first upgrade every server in the cluster to the latest version of Cisco CallManager Release 3.3, 4.0, or 4.1 before you can upgrade to a version of Cisco Unified CallManager Release 4.2. For information on upgrading to Cisco CallManager Release 3.3, refer to the latest version of Upgrading Cisco CallManager Release 3.3.
Note If you are upgrading from Cisco CallManager 3.3, you must use the disks from the Cisco Unified CallManager 4.2(3) software kit.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_installation_guide_chapter09186a00807202d7.html
If all you want from the 3.2 database is the phone/user info, you may be able to use the BAT Export from 3.2 and then BAT Import on 4.2. Be careful with the actual BAT format between versions as they will not match exactly for sure. With some tweaking this would probably work. Try some example Export/Imports to fine tune the .csv or BAT.xlt details before going for the lot.
Hope this helps!
Rob

CCM and MDM

Hi Architects...
I would like to understand how SAP MDM can be integrated with SAP SRM/CCM. Since SP03, MDM is OCI enabled so 'close/tight' integration becomes feasible. Doesn't CCM becomes obsolete as all master data can resides in MDM now..
Is there any best-practice on using MDM with SRM/CCM ?
Thx,
Dirk

Mattias,
What is the SAP SRM version you would like to upgrate to? If u plan to upgrade to SAP SRM 5.0 (Server 5.5) u dont need to upgrade to SAP MDM, however SAP suggest it. In SRM 5.0 bundle u have CCM 2.0 included,(CCM 2.0 is supported till 2013).
On the other hand if u plan to upgrade to SAP SRM 6.0, MDM Catalog is included.
However, even with SAP SRM 5.0 you can also use MDM Catalog, but it is not included in the bundle but it is something extra.
JK

Error during upload pictures in CCM 2.0 via CVS file

Hello everybody,
We're using SRM5.0 and CCM2.0.
I'm trying to upload (via CVS upload) pictures but during the upload in the supplier catalog following error message appears: Value for catalog item xxx (supplier part number) of supplier xxx is incorrect.
This errors appears only when we add our picture characteristics which are in our upload file : /CCM/PICTURES#/CCM/URL and also /CCM/PICTURES#/CCM/DESCRIPTION.
We put all pictures in MIME repository and also put the MIME repositerory URL link on schema level into procurement catalog. We're using "Pictures" characteristic. But I know that characteristic "Image" also exists. What do I have to use? Do I have to put something specific into cahracteristic /CCM/PICTURE (our OCI field is still empty there...)?
It would be great if somebody can help me on that,
Regards,
Caroline

Hi,
I don't understand very well, the standard characteristic for images is /CCM/PICTURE.
It's a complex characteristic composed by
/CCM/DESCRIPTION
/CCM/URL
/CCM/MIME_TYPE. (for example image/jpeg).
If your problems still exist, you can send me your file
Regards

Installing CCMS on a new system. System entry not found in RZ20CEN aftr reg

Hi Guys,
I am trying to install CCMS for our systems. I have made all the configurations as per the "Monitoring Setup Guide
(CEN SAP Net Weaver7.0 SPS 13)" document and refered all the help.sap.com doc's for configuring ccms.
I have registered the system with the CEN and I see the entry for my system in CEN in RZ21. but in RZ20 on CEN I donot see the entry for my system.
Do I need to add this manually in RZ20? Or did I miss something. If some one has come accross this plz help.
Thanks
Manmath

Hi Kunal,
That was very helpful. I awarded you the points.
I had just done that when I received your reply.I refered to to the thread
CCMS CEN Configuration for SAP 4.6C version
Now, I have added the system to the new monitor set.
I want to use the templates provided by SAP to set up the alerts (monitor).
There are templates like
SAP CCMS Monitor Templates
SAP CCMS Monitors for Optional Components
SAP CCMS Technical Expert Monitors
SAP CCMS Technical Operations Templates
How can I use the template SAP CCMS Monitor Templates ?
Thanks
Manmath

CCM 2.0

Hi,
We are using SRM 5.0 SP 7, CCM 2.0 SP 7 and SAP_ABA 7.0 SP10
We are trying to transfer product master data from SRM to CCM. The data is getting successfully transferred from SRM to XI and SMXB_MONI in XI server shows successfully message but we are not able to see the Catalog id SRM_EXTRACTED_CTLG in CCM. We checked the logs in SLG1 which shows as /CCM/CX_OBJECT_CREATION_FAILED .
The exception occurred at the following point:
Program /CCM/CL_SCHEMA_MANAGER========CP
Include /CCM/CL_SCHEMA_MANAGER========CM006
Table /CCM/D_UPD_STATE shows the entry of the catalog SRM_EXTRACTED_CTLG in CCM but with errors.
As anyone faced this issue before?
Thanks and Regards,
Anthony

Hi
<u>Related SAP OSS Notes to refer here -></u>
Note 1039136 Price condition of new items not transferred.
Note 915866 BBP_CCM_TRANSFER_CATALOG - COMMIT MISSING
856092 Error in SRM-CCM master data transfer in locked products
873303 Master data transfer CCM: Initial transfer is quicker
875039 BBP_CCM_CHAR_MAINT: Valuating predefined characteristics
867960 Master data transfer CCM: Services transferred too often
865338 SRM extraction->CCM check of the validity end date incorrect
865434 BBP_CCM_TRANSFER: additional entries in the application log
864208 Master data transfer to CCM: too many changed products
858615 Lock problem for many products
Note 811655 Report BBP_CCM_TRANSFER_CATALOG creates short dump
Note 813484 Master record transport: Improved search help
Do let me know.
Regards
- Atul

Conversion of an excel file into a CSV 2.0 file for uploading in CCM 2.0

Hi guys,
We are downloading content from SAP R/3 into an excel spread sheet.
We are uploading this content in a CSV file 2.0 into CCM 2.0
the csv file we use today we are arming manualy because of the difference in structure between excel and CSV 2.0. We would like to be able to convert easily the excel file in a CSV file. How can one do this.
Example of our csv-file:
SAP CATALOG CSV 2.0 <,>FULL,,,,,,,,,,,,,,
DEFAULTS,ES,,,,,,,,,,,,,,
Model,,,,,,,,,,,,,,,
DataType,String_ID,String,,,,,,,,,,,,,
Characteristic,Z_COMPANY,/CCM/ID,,,,,,,,,,,,,
Characteristic,Z_DOC_TYPE,/CCM/ID,,,,,,,,,,,,,
Characteristic,Z_DATE,STRING_ID,,,,,,,,,,,,,
Characteristic,Z_SUPPLIER_ID,/CCM/ID,,,,,,,,,,,,,
Characteristic,Z_MARCA,/CCM/DESCRIPTION,,,,,,,,,,,,,
Schema,ENTEL,Z_COMPANY,Z_DOC_TYPE,Z_DATE,Z_SUPPLIER_ID,Z_MARCA,{}ENTEL,,,,,,,,,,,
Category,PRODUCTOS ENTEL,,,,{}ENTEL PRODUCTS,,,,,,,,,,
Category,A.B.G INGENIERIA S.A.,PRODUCTOS ENTEL,,{}A.B.G. INGENIERIA S.A.,,,,,,,,,,,
Content,,,,,,,,,,,,,,,
ItemValuation,parent cty,/ccm/supplier_part_no,/ccm/base_uom,/ccm/order_unit,/ccm/price[1]#/ccm/amount,/ccm/price[1]#/ccm/currency_code,Z_DOC_TYPE,/ccm/supplier_name,/ccm/contract_id,/ccm/contract_item_id,Z_MARCA,/ccm/short_description,Z_SUPPLIER_ID,/ccm/product_group,/ccm/product_id,Z_DATE,Z_COMPANY
1,A.B.G INGENIERIA S.A.#ENTEL,61,PCE,PCE,1,UF,ZSV0,A.B.G INGENIERIA S.A.,4410000181,10,ALL,Insp.TTecnica Terreno Servicios Privado,096898120K,A0307S001,3001870,20060111,ENT
Any advice is welcome,
Thanks in advance
Aart

Hi,
We are also facing same issue like when we saved data was in CSV formate but now when we open the file then it comes in Text formate.
Currently file extension is .xls but we tried to change that to .csv but still it opening in text only...
Regards,

Uploading of Master Schema in CCM 2.0

<b>Hello Seniors,</b>
We are implementing CCM 2.0 as per landscape given below:
SRM release 4.0
EBP component 5.5
Scenario being implemented SSP and CCM
(employee should be able to create shopping cart for catalog items through EBP)
CCM and EBP are in same client
No XI installed as we will be uploading CSV catalogs only.
Now, when I start with the basic step of uploading master schema and click on "upload" button in edit catalog , no selection box appears so that I can browse CSV file from my local m/c. When I try to check the URL linked to "upload" button , no URL is found.
I know that config guide says that for first time we should click "edit catalogs" first. But I am not sure whether anybody has clicked any other button as I joined late on this project.
I have run the report " /CCM/INITIALIZE_CME" on the CCM system.
Pl. help.
You are most welcome for any clarifications required.
Thanking in advance.
Regards,
Dinesh Powale
093238 73714

Hello CCM seniors,
I request you to go through the earlier communication of this thread.
Now the status is the user i am using for CAT has following roles:
/CCM/CATALOG_MANAGER
/CCM/CATALOG_SEARCH
SAP_BBP_STAL_ADMINISTRATOR
SAP_BBP_STAL_EMPLOYEE
SAP_BBP_STAL_MANAGER
SAP_EC_BBP_ADMINISTRATOR
SAP_EC_BBP_EMPLOYEE
SAP_EC_BBP_MANAGER
and profile of sap_all and sap_new.
in my home page all the buttons "upload,edit,publish,schema expo,delete, delete history,add to favoirites" are active (but there are no URLs attached in the properties of these respective buttons).
i had run /ccm/intialize_cme , restarted server , could find /ccm/master catalog in IMG-->fuzzy search,
but the same master cataog was not appearing on CAT home page.
when i check SLG1 i am getting the following message
"error when generating catalog /ccm/master_catalog " and also "error when creating a catalog"
can anybody pl. help??
if you require any further info i can send screen shots on personal ID !!
best regards,
Dinesh

Upgrading fm CCM 1.0 to CCM 2.0

Similar Messages

Maybe you are looking for