Upgrading from 10.2.8 to Tiger, questions?

I've never upgraded my OS. I've had my G4 for two years and have enjoyed using it very much. I recently purchased an external Lacie DVD/CD Burner with lightscribe capabilities, but I can't use it with my current OS. I went ahead and bought Tiger, and started to install but then I aborted when after RESTART the G4 was stuck at the bright initial image with the Apple icon and the spinning wheel.
It was in this mode for almost 10 minutes, so I finally did a hard boot, and ejected the install disk. When it came back I saw three icons: In the center was my hard drive icon with an OS blue "X" on it, to the left was a circular arrow icon, and to the right was a straight arrow icon pointing to the right.
Everything seemed to come normally when I clicked on the arrow pointing to the right.
So, here's the deal. I want to upgrade to Tiger, but before I do it again I would like to get some informative answers to a few of my questions.
By attempting to install the new OS and stopping it, did I do anything wrong that I need to go in and fix?
Should I back-up my Home Directory files before installing?
Do I need to upgrade to Panther before I can upgrade to Tiger?
What info should I document prior to the install, ie internet settings, that may get wiped when I do the install?
Also, should a do a full install, or a custom?
I use Final Cut Pro and it's companion programs almost every day, and I would hate for anything to jeapordize these programs. If there is anything I need to be wary of, please let me know.
Thanks for all your input and advice.

Hi Christopher,
Welcome to Apple Discussions.
By attempting to install the new OS and stopping it, did I do anything wrong that I need to go in and fix?
Something obviously went wrong, but I'm wondering if you got a viable Tiger install: go to Apple Menu>About This Mac and see what version of OSX it lists.
Should I back-up my Home Directory files before installing?
Yes. Should always be backed up, but even more so when installing a new OS.
Do I need to upgrade to Panther before I can upgrade to Tiger?
No.
What info should I document prior to the install, ie internet settings, that may get wiped when I do the install?
Your ISP connection settings and Mail would be helpful so you don't have to figure them out again; you may want to take screen shots of them.
Also, should a do a full install, or a custom?
If you do an Upgrade or Archive and Install, it should leave your settings and home folder intact so you may not have to reset much. However, if one of those doesn't work (there was obviously some kind of issue first time around - and btw, which install option did you choose?) you may have to do an Erase and Install, in which case everything will be erased and only Tiger installed.
Also, do you want OS9 and/or Classic?
I use Final Cut Pro and it's companion programs almost every day, and I would hate for anything to jeapordize these programs. If there is anything I need to be wary of, please let me know.
You'll need to check with the makers of your software to see what's Tiger compatible, what will need to be upgraded and at what cost.

Similar Messages

  • Need to upgrade from 10.4.11 to Tiger..

    Can I upgrade from 10.4.11 to Tiger through app store, or do I need install disk? Really don't want to move all my files, so I am hoping I can upgrade with just a few clicks...

    Hi Ira,
    10.4 is Tiger, & 10.4.11 is as high as Tiger goes.
    10.5.x is Leopard
    10.6.x is Snow Leopard
    10.7 is Lion
    The highest OS your Core Duo can run is 10.6.x, you cannot install or run 10.7 on it...
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 2GB at least)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    It looks like they might still have it...
    http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
    If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.

  • Upgrading from a G5 iMac running Tiger to a new iMac.

    I am upgrading from a G5 iMac running Tiger to a new iMac, can I use 32Gb SD Card to move iphotos, itunes, ivideos? If so, how do I do it and insure I keep slideshows, playlists etc. I have built in iphoto, itunes etc.

    Your Tiger iPhoto library may need upgrading with a Apple Library updater tool before you can use it with iPhoto '11. Reference. More iPhoto help just in case.
    Make sure that that SD card is an SDHC card, and not just an SD card, or it may not be readable in your new iMac.
    Here is the layout of the iTunes 11.0.1 Music folder on OS X 10.8.2. It may vary from what you have on Tiger.
    Read the following articles before you move your iTunes library from Tiger.
    iTunes for Mac: Moving your iTunes Media folder.
    iTunes: What are the iTunes library files?
    When you are satisfied that your iTunes content is moved over to Mountain Lion, you may wish to deauthorize the G5 from iTunes.

  • Upgrade From 10.1.2 to Tiger

    I have a friend who was using her flat panel iMac mainly in OS9. She wanted to upgrade to Tiger and has been sold the OS but is now worrying that she will have to wipe her entire hard drive to install it. She doesn't want to do this. Will the discs perform an upgrade?

    Hi Danktuft ,
    First make sure you buy the retail full install version of Tiger (black DVD). You cannot use hardware specific disks that shipped with another computer (gray).
    You cannot directly upgrade from 10.1.x to 10.4.x. You will have to either reformat the drive (recommended) or do an Erase&Install. In both cases all your data will be lost, so make sure you have a complete backup!!!
    If your computer can boot into OS 9 natively:
    I suggest to reformat the drive using the OS 9 install CDs. By reformatting the drive with the OS 9 disk you are safe that all required OS 9 hardware drivers will be installed properly.
    0. BACKUP YOUR ENTIRE HARD DISK - it will be completely erased during the following procedure!
    1. Boot up from the OS 9 install CD and reformat the drive as Apple Extended (HFS+).
    2. Install OS 9 and update it to 9.2.2: Mac OS 9: Available Updates
    3. Confirm you can boot into OS 9
    4. Upgrade your firmware: Firmware Upgrades
    5. Insert the Tiger install DVD and reboot while holding down th c-key.
    6. Once the installer has started select "disk utility" from the menu.
    7. Select "repair OS 9 privilegies" from the menu.
    8. Repair the disk.
    9. Quit disk utility and proceed with a normal install (do not select Erase&Install because this would erase your OS 9)
    10. After the reboot Repair permissions!
    11. Download and apply the Mac OS X Update 10.4.8 Combo PPC.
    12. Repair permissions again and finally run Software Update from the Apple menu to install all remaining updates (yes, you should install all at once because only the software update app knows the exact order in which they have to be installed).
    Good luck!
    If this answered your question please consider granting some stars: Why reward points?

  • Error message when trying to upgrade from 10.3.9 to Tiger 10.4.5

    Hope somebody can help. I'm fairly recent to macs as have always built and used pcs. Am having trouble upgrading from current pantherOS to Tiger. Bought emac with upgrade disc provided by seller. Disc was gray labelled emac. Installation went fine and everything was proceeding to point it finished writing files, configuring installation, and running installer scripts and then it quit with message: error installing software. Try reinstalling.
    Tried reinstallation and same thing occurred. then Tried complete erase and new installation. Same error message.
    Came to discussion group searching for something I might be doing wrong. Decided maybe disc was wrong even though it specified emac which is what I am using. Bought generic install disc that would install on any G3/4/5 with minimum specs per hardware which system met.Installation proceeded as it was going to install same as emac disc. This is normal full install disc for generic installation.
    All installations screens came up and installation proceeded to same point as before and then quit with same message: error installing software/ Try reinstalling.
    Have removed ram to original 256MB and tried. No luck. I am using external DVD for installation of DVD and wonder if this is problem but in the forums external DVD seems to work alright. Can reinstall old Panther OS without any problem
    Ran hardware test and everything checked okay.
    Should I just forget about upgrading and use 10.3.9 but would really like to know what is wrong. thanks. Rick

    Welcome to Apple Discussions!
    See my FAQ:
    http://www.macmaps.com/upgradefaq.html
    and then consider the instructions here to Archive and Install:
    http://docs.info.apple.com/article.html?artnum=301270

  • Upgrade from 10.1.5 before Tiger?

    I have an eMac and don't know much about computers. I was told to get the MSOS X 10.4. Do I need to upgrade something before attempting to install? I can't event get the install information to come up on the desktop.
    Thanks,
    scottingham
    eMac   Mac OS X (10.1.x)  

    Hi, scottingham. Welcome to the Discussions.
    I agree with Templeton that more details on how you are going about trying to install Tiger would help us help you.
    Meanwhile, here are some things to consider:
    1. Does your eMac have a DVD-capable optical drive? Tiger ships on a DVD. If you do not have a DVD-capable optical drive, you can exchange the Tiger DVD for CDs. See the info concerning the "Media Exchange Program" in the box in the right border of this page.
    2. Assuming your eMac has a DVD-capable drive, have you tried starting up your eMac using the Tiger DVD?
    3. I believe you must have Mac OS X 10.2 Jaguar or later installed in order to install Tiger by the Upgrade Install method. Let me explain:
    • The article "Mac OS X 10.4: About installation options" states "... "Upgrade to Mac OS X" appears (unless the installed version can't be upgraded, as described in this article)."• The reference to "this article" in the quote above is to the article "Mac OS X 10.2: Upgrade installation requires Mac OS X 10.1 or later," which states one cannot upgrade from 10.0.x to 10.2. I think this reference is incorrect w.r.t. TIger.
    • I believe that reference is incorrect for the following reason: in the manual "Mac OS X v10.4 Tiger Installation and Setup Guide" that should be included in your Tiger retail package, it states on page 3:"If you already have Mac OS X v10.2 or later installed on your computer: All you need to do is Upgrade Tiger..."This implies to me one must be running 10.2 or later, not 10.1.5 as you are now, to use the Upgrade Install. You could use the Archive and Install option discussed on page 7, again presuming your eMac has a DVD capable drive and that some other problem is not prohibiting the disc from mounting.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • Upgrading from 15" MBP to 13" MBP (questions on Adobe CS/Microsoft)

    Hi there,
    I have an existing MBP 15" running Snow Leopard that I use for work. I will be purchasing a new 13" from Apple which has Lion to replace my work computer. However, I will be keeping my 15" and would like to upgrade that to Lion (will purchase the Lion software). In addition, on my 15" I have Adobe CS4 and Microsoft Office 2008. I have purchaed the upgrade to Adobe CS5.5 and the new Office 2011 (finally with Outook) which I intend to use on both computers (this is all within the license agreements - installing on 2 computers used by the same user, but not running at the same time).
    I basically want the 15" and 13" to mirror each other. I know I can do this with Migration Assistant, but I have questions on the way to prep the computers first before doing so (mainly my concern is tranferring Adobe CS programs versus installing them from the CDs and trasnferring from a Snow Leopard OS to a Lion OS). If anyone has any advice on the options I've listed below, I would really appreciate it. I also plan to post to the Adobe and Microsoft forums but thought I would start here first.
    Option 1: Is it better to first upgrade EVERYTHING on the 15" and then use Migration Assistant to tranfser everything including apps to the 13"? This means on the 15", first upgrade from Snow Leopard to Lion, then install the upgrade to Adobe CS5.5, install Office 2011 (transfer from Entourage email to Outlook) and then transfer everything to 13" new computer.
    Option 2: Should I only upgrade the 15" OS to Lion and then transfer all the apps as is (Adobe CS4/Microsoft Office 2008) to the 13"? After the tranfsfer, then on both computers, I would install from the CDs the Adobe CS5.5 upgrade and Microsoft Office 2011.
    Option 3: Should I just transfer everything as is (without upgrading first) from the 15" to the the 13"? This means after the transfer, on the 15" I would install Lion, then CS5.5 upgrade, then Office 2011 from CDs. Then on the 13", I would install from the CDs Adobe CS4, then CS5.5 upgrade, then Office 2011 (I don't really need 2008 on the 13" as this will be my work computer that I need Outlook for).
    I'm also wondering in general regarding Entourage to Outlook if is better to do that transfer of email on my Snow Leopard computer first or Lion or does it really matter?
    Thanks so much in advance!

    Csound1 wrote:
    Courcoul wrote:
    15" to 13"?  That, technically, is a downgrade, in more ways than one.
    2008 to 2011,
    That, technically, is a upgrade, in more ways than one.
    Mid 2009 to 2011...
    Will be a good test whether I/O trumps pure processing. Now, if the OP lucks out and gets the 13" when this year's iteration comes out (Ivy Bridge), then I'll raise the white flag and accept "upgrade".

  • Is upgrade from French Panther to English Tiger recommended?

    Hi all
    I guess the title says it all...
    I'm currently running the French version of OS 10.3.9 (even though I always use it in English) on an iBook G4 purchased in France, with a French keyboard.
    I'm pretty sure I need to upgrade to 10.4 but I have a couple of questions:
    1) Am I more likely to run into problems if I try to upgrade to the English version of Tiger?
    2) I have Macromedia Studio MX 2004 and Adobe Creative Suite v1 installed and rely on them for my living. I've checked the Adobe Tech Notes and it appears that all the initial problems encountered when running these packages on Tiger have now been ironed out. Does anyone know if there are still any outstanding issues/problems that I should be aware of?
    Thanks in advance for the help!
    Martin

    Hi Martin,
    MAC OSX is multilingual. You don't have to be worried in between french and english.
    I personally used os 10.4.8 and MacroMedia Studio MX 2004 and I have no problem with it (I had performed all MacroMedia updates). However, I have CS2; so I could not talk about CS1.

  • What to be aware of upgrading from 10.2.8 to Tiger

    I have an iMac superdrive G4 17" flatpanel. I am running on 10.2.8 currently but am considering upgrading to Tiger. What should I be aware of with regards to my software if I do upgrade - most importantly my Photoshop 7, Illustrator 10, InDesign 2 (am not wanting to invest in all the upgrades of that and Tiger at the same time) -or for my Epson printer drive? I'm just worried that I'll upgrade and find that much of what is on my computer will now have difficulties and require more $...
    Any help or advice?
    thanks,
    Tracy

    Hello TracyZ:
    Welcome to Apple discussions.
    I do not use those applications so I have no first hand knowledge. I would check with the manufacturer's web site to check on compatibility. You might also do a search of the OS X 10.4 forums to gain additional information. The printer "should" work - but, again, check to see if Epson has upgraded the driver to work with Tiger.
    If you decide to upgrade, have a good backup (I just described my own approach to back up and upgrading here):
    Barry Hemphill, "BACK UP" #3, 07:32am Nov 3, 2005 CDT
    I am a fan of OS X 10.4 - I really like the Safari version (2.0.1). That Safari has a built-in RSS reader - great for us news junkies.
    Barry

  • Upgrading from 5.1 to 5.2 question

    We are currently testing 5.1.0.44.2.  Due to design problem in 5.1.0.44.2 that would allow us to implement the product with the wildcard functionality we have in 4.2, we werent able to roll this into production.  Had we known about this deficiency, we wouldnt have ordered the product.  After multiple TAC calls, we found out that a future release/update would have the wildcard function we needed.  Otherwise, we are looking at a significant configuration change to close to 500 devices firmwide.
    I have been looking for the info on upgrading and dont see a clear path.  Do I download the FCS ISO for 5.2 and the latest patch to start with ?  Since we never went to production, is there an upgrade path that allows me to keep the installed license or do I just blow out what we have and then replace the license ?  Since we have smartnet on this, I am assuming that our existing license from 5.1 should work on 5.2 or will I need to get a new license from Cisco Licensing ?
    Thanks,
    Ron

    Base on the release notes
    http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/nx-os/release/notes/52_nx-os_release_note.html#wp423588
    You need to upgrade to 5.1.(3), and from there, the upgrade to 5.2.7 is supported using ISSU i assume. Worst case, the system will prompt you the the upgrade going to be distruptive or not before proceeding with the upgrade.
    But in release note 5.1(X), it did not mentioned that upgrading from 5.1(2) will be distruptive or not since 5.1(2) has been deffered.
    Thanks

  • Worried about upgrading from 10.2.8 to Tiger

    I know, everyone tells me I should upgrad to Tiger. I've been using 10.2.8 for some time now on my iMac FP and I got a lot of applications on it. My thinking is "If it aint broke, don't fix it" but I am finding that new stuff like the newest Java and iLife, etc., don't run on 10.2.8.
    So, can everyone put my worries to rest? I guess I want to do the "upgrade" so I don't lose my existing apps. I have two large firewire drives. If I back everything up to there, is that a good idea? Or, since I'm doing an update, I don't have to worry about that? When you upgrade, what happens to all the apps you've installed in the "Application" folder? Are they still there? I would think that things like "Terminal" and other OSX apps would be replaced.
    My internal drive is 80G and I'm using about 33G of that. I have one FW external drive that has 140G available. Should I "clone" my 33G internal to it, then do a clean install. If I do that, how do I get my stuff back over from the clone to the newly formatted 80G internal with Tiger on it.
    I'm sorry for all the questions, but its a big step for me to take. Is upgrading just as good as doing a clean install?
    More questions, I know.
    Well, I'll stop now.
    Thanks in advance,
    Alfredo

    If we go right back to the original Question we can assume that you are concerned about loss of data and the possibilty that a new or upgraded os will not operate to your satisfaction.
    Point 1. regardless of what you do relating to the os you must have a backup?
    Point 2. If you do not have a backup then make one. This is without question the most important fact of all time regarding data on a computer regardless of what system amd which os you run.
    Point 3. all advice given by others is good, the choice of which app to use regarding a backup is often personal as many apps do the job as required.
    Point 4. If a backup exists then you already have your insurance. Making changes to your os can be done without worry as this is the primary reason that backup apps exist. If we ever take the time to read the "read me files"
    All of them state that we should make a backup before installing new data!
    Point 5. I wish you a happy Christmas and wish all a happy mac in the new year.
    regards
    john

  • Upgrade from 10.1.2 to Tiger (can it be done)

    I have a relative who is still using 10.1.2. He is using a flat panel G4 with 512k ram and 40GB HD. he would like to upgrade but he still has some old system 9 apps that he uses and does not want to lose them plus he still wants his iMac to work. Can this even be done.

    James:
    Tom has given you information on the System Requirements for Tiger.
    Your relatives flat panel will run the latest version of OS X, (read Tiger). This computer has Open Firmware, and does not need a Firmware update. Although 512 MB of RAM meets the minimum requirement I suggest upgrading to 1 GB of RAM.
    Expanding on what Tom said, Tiger can be purchased from the Apple Store or, on CDs, from applerescue. See this article for options on Installing Tiger without a DVD drive.
    Please do not hesitate to post back with further questions or comments.
    Good luck.
    cornelius

  • Upgrade from OS 9.1 to Tiger...is it possible?

    I have a Powermac G4 running OS 9.1. I have recently upgraded the processor from a 466 to a 1.2, and added the maximum amount of RAM (1.5gb). I have an available copy of Tiger that I would like to install. I am guessing that the best option would be a clean install, as opposed to an upgrade.
    I have just updated the firmware...I would love any input about what I may be overlooking before going ahead with the install.
    Thanks, Aaron
    PowerMac G4   Mac OS 9.1.x  

    These are other questions you should be asking:
    1. Is your data backed up?
    2. How much free disk space do you have?
    3. Is the majority of your software already available for Mac OS X, and are you going to buy, or install the necessary updates to run them natively in X?
    4. Are the drivers available for Mac OS X to connect your peripherals?
    Mac OS X doesn't have a "clean install" option. Rather as was already mentioned you don't have to erase your drive to install it. There are these options for installation:
    http://discussions.apple.com/thread.jspa?messageID=607614

  • Upgrade from 10.2.8 to Tiger

    I have this: eMac 700MHz PowerPC G4 700MB memory
    The Tiger DVD ejects itself and a previous post says I might need to update the Superdrive firmware. I can't find the download to do that. I have "DVD.framework 1.2.2"
    Do I have to install Panther before Tiger?
    Thank you.
    Judy Darby

    Hello Judy,
    First of all, Welcome to the  Discussion Forums!
    Are you holding down the "c" key while restarting and booting to the install dvd? Are you sure your eMac model has a combo drive or dvd superdrive? Some of the older eMacs I beleive do not. Have you looked at the dvd to make sure it is not scratched or warped perhaps?
    No, you do not need to upgrade to Panther 10.3 first before upgrading to Tiger 10.4 from 10.2.8 Jaguar.
    "a previous post says I might need to update the Superdrive firmware. I can't find the download to do that"
    Open the  Menu and click on About This Mac and then when the info pane opens click on "More Info" button. When the System Profiler opens under Contents (left pane) select "Hardware" if not already selected and then look in the right pane for the "Boot ROM" version. This should read Boot ROM Version: 4.1.9f1. If it does not you may need to upgrade the firmware from here for your particular model.
    Make sure you have purchased and upgrade with a full retail install disk set of Tiger 10.4 and not machine specific or computer model specific upgrade disks.
    Here are the "Mac OS X 10.4 Tiger System Requirements".
    hope that helps some and post back with further questions or comments,
    littleshoulders
    Message was edited by: littleshoulders

  • Upgrade from 10.3.9 to tiger and can no longer restart or shutdown

    I upgraded my powerbook G4 with 1 gb of ram with tiger recently and ever since, I can not reboot or shutdown without holding down the powerbutton. The system shuts down all programs and then hangs on the desktop with no applications running... just a blank screen.
    If I press the powerbutton, the window that prompts you what you want to do (shutdown, restart) comes up, but does not do anything.
    I use file vault.
    Any ideas? I can not find anything on this on any support site. I can not reinstall the OS again... as I can not restart into the CD or boot from a CD by holding down C.
    HELP
    I'm about to trash this mac and by a PC!

    Since you can't boot from the Tiger install disc to run Disk First Aid repair, you can run FSCK instead with instructions for doing so provided per this link.
    http://docs.info.apple.com/article.html?artnum=106214

Maybe you are looking for