Upgrading from 10.4.11 to 10.5.7 possible?

I have two computers:
-13-inch MacBook Pro (2.25 GHz Intel Core 2 Duo, 2 GB 1066 MHz RAM, OS 10.5.7)
-15-inch MacBook Pro (2.16 GHz Intel Core 2 Duo, 1 GB 667 MHz RAM, OS X 10.4.11)
I am trying to upgrade my 15-inch MBP to Leopard with the OS X Installation DVD from the 13-inch MBP. When I proceed with installation, the language-selection window pops up, then "Mac OS X cannot install on this computer".
Any way to successfully upgrade with this DVD?
DVD information: It is the grey disk(s) bundled with purchase of the 13-inch MBP. It reads "13-inch MacBook Pro, Mac OS X Install DVD, Mac OS version 10.5.7, Disc version 1.1".

Betaville wrote:
I have two computers:
-13-inch MacBook Pro (2.25 GHz Intel Core 2 Duo, 2 GB 1066 MHz RAM, OS 10.5.7)
-15-inch MacBook Pro (2.16 GHz Intel Core 2 Duo, 1 GB 667 MHz RAM, OS X 10.4.11)
I am trying to upgrade my 15-inch MBP to Leopard with the OS X Installation DVD from the 13-inch MBP. When I proceed with installation, the language-selection window pops up, then "Mac OS X cannot install on this computer".
Any way to successfully upgrade with this DVD?
DVD information: It is the grey disk(s) bundled with purchase of the 13-inch MBP. It reads "13-inch MacBook Pro, Mac OS X Install DVD, Mac OS version 10.5.7, Disc version 1.1".
In general you can't install Mac OS X from a "system disc" that came with one Mac onto a different model of Mac. You'll need a standard "retail" OS X installer.

Similar Messages

Future upgrading from current MBP express card 34 capability to54 possible?

My MBP arrived this morning and (my bad) I just noticed lack of FW800 port. I came here to discussions before tearing the seal on the protective envelope in case I might need to return based on your answers:
From reading here, I see people saying express card is better than FW800, but saying 34 is bad, 54 is good/wave of the future.
If I keep this MBP, will I be able to have the internal 34 upgraded to 54, or is the physical slot opening in the body unable to do this, making this MPB already obsolete?
And assuming that there is eventually an expressCard34 adapter eventually made for FW800 (current links provided on the board only led to expressCard54 adapters to FW800), will I be getting FW800 speed (or faster)?
Sorry if these are dumb questions.
MBP, PowerBookG4, etc Mac OS X (10.4)

ExpressCard 54 cards are wider than 34's (hence the name), so no, the slot on a MacBook can't support them. It's possible someone will come out with an adapter with some kind of a dongle that plugs into the 34 slot, but it would be cumbersome to use.
When a FW800 ExpressCard 34 comes out, it should be full FW800 speed, since the ExpressCard bus speed exceeds the speed of FW800. But you'll have to check the individual card vendors to see what they provide on their products.

Upgrade from CRM 5.0 to 7.0 not possible ?

Hello CRM-experts,
yesterday I was on presentation of CRM IC-helpdesk, and the mentor
explained that there is no upgrade-strategy from sap for the crm 5.0 to 7.0.
Is that true ? Ins't it possible to upgrade my crm 5.0 SP11 to crm 7.0 ? (included with mobile sales ?)
We use crm-online (quotations, orders) and mobile sales .
Thanks for response,
Gerd

Gerd,
That is wrong about the upgrade path, your SAP rep and Kai mis-understand what no-direct CRM upgrade path means.
Here is the deal:
If you are using CRM 5.0 with the SAP GUI/PCUI/IC webclient based applications then your upgrade migration is the following:
1. Technical upgrade of CRM 5 to CRM 7.0
2. Manual conversion of SAP GUI/PCUI/IC webclient enhancements from CRM 5 to the CRM 7.0 webclient UI. This only applies to the UI enhancements, and most of your backend BADI's provided they did not violate any CRM enhancement concepts will still work.
If you review the PAM at http://service.sap.com/pam or read the upgrade guide on service marketplace you will see this is the case. It even states on the PAM that CRM 5.0 is a source release for the upgrade to CRM 7.0. There is no need to go to CRM 2007(6.0) first.
Honestly there is not a "huge difference" between CRM 2007 & CRM 7.0 except that CRM 7.0 is a refinement of CRM 2007.
Take care,
Stephen

Upgrade from Tiger Unlimited to Leopard 10 User License Possible?

Hello:
I have a Intel Xserve that came with an unlimited user license for Tiger. We have less than 10 afp users, so the 10 user license is sufficient. Does anyone know if I can purchase the 10 user version of Leopard and "upgrade" to that?
Thanks much!

Hi
This should tell you everything you need to know:
http://www.apple.com/server/macosx/specs.html
Tony

Upgrade from 8.1 - Installation stuck at 30% - Revert possible?

Hi All,
I started my W10 installation last night and it has been going for about 11 hours. It has however got stuck at 30% as reported by many other users on the 'Applying PC Settings' stage. I wondered if I was to do a hard reset would it revert back to 8.1 or
am I better off just leaving it to see if it completes?
Thanks

If the installation fails to complete you will revert to the previous install. In your case, 8.1.
I should point out though that if left for long enough the update is likely to complete on it's own. My record updating times are ~20 hrs for Win 10 to Win 10 and ~28 hours for Win 7 to Win 10, especially on older hardware. Doing a fresh install is *much*
faster and I would recommend that where possible. In general, the new updater in use for Windows 10 is very poor, easily the most disappointing aspect of the entire build.

Is it still possible to upgrade from cs5 to cs6 standalone

i have a copy of cs5 which is an upgrade from elements and wondered if it is still possible to upgrade to cs6.

Sure, start here:
http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_cata log_sl_software_sl_creativesuite6.html
Note that you can get to the upgrade prices after you click the Buy link.
-Noel

I want to upgrade from the 4th generation to the fifth generation

i want to upgrade from my fourth generation to a fifth generation

Not possible, there is no trade from ipod 4g to ipod 5g.

SRM Upgrade from SRM 4.0

Does anyone have any good incite on upgrading from SRM 4.0 to SRM 5.0 possibly(6.0)? We are preparing to upgrade to ECC 6.0 and I want to know for:
1 - Is an SRM upgrade absolutely required if we are currently on 4.0?
2 - What are the possible benefits/pitfalls of the upgrade in both SRM 5.0 and 6.0?
Your wisdom is greatly appreciated!
Points will be rightfully rewarded!
Charles

Hi,
See the foll links:
SRM 6.0 update
https://websmp101.sap-ag.de/~sapidb/011000358700006330942006D
Since SRM 6.0 is quite new, and will be officially released after some time, you need to read the release notes in order to find the exact differences in terms of enhancements from the above link.
Refer to this OSS Note as well.
Note 995220 - SRM 6.0 SP Stack 00 (12/2006): Release Information Note
You can check next link:
https://websmp110.sap-ag.de/srm
Re: Additional advantages of having SRM in EBP 5.0 compared to EBP 2.0
In EBP 5.0, you have more flexibility in case of the WF's.e.g. in the SC Approval WF's ,you can have the n-step dynamic header level as well as the Item level approval Workflow in addition to the Standard 1 step,2 step and no approval Workflows
BR,
Disha.
<b>Pls reward points for helpful answers.</b>

I upgraded from 3gs and want to use my old 3gs as an ipod. how can i update my new apple ID on the 3gs as it still shows a previous one that I had?

I recently upgraded from 3Gs to Iphone4 and want to use my old 3Gs as an ipod. how can i update
the user ID on the 3gs to a new one that I have as it is still showing a previous user ID?

Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.

Is it really possible to upgrade from a Treo 650 to a Treo 750?

I am not a very happy customer at the moment, but any help would be greatly appreciated. I upgraded from my old Palm Tungsten to a Zire, then to a Cingular Treo 650, combining three devices into one. I have since discovered that the Treo 650 seems to have a faulty transmission mode, as I can rarely be clearly understood by whomever I call. Am on the second (or third, I have lost track) and continue to have the same problem. I get five bars of reception but can't be understood on the other end. A bit of a problem when one is trying to call 911. Am constantly told I am "breaking up". The repair shop says it "Can't duplicate the problem". OK, then I do not want to give up all the info I have stored in the fool thing, and the 750 seems to have a different system, so I thought I would try that. All the stuff I could find seemed to indicate it wouldn't be a problem to upgrade. When the 750 arrived, I tried to install the software from the CD on my Windows XP computer. No dice. Setup encounters an error and closes. Can't even look at the files, because setup tries to run any time I access the CD. From any drive. Gave it to my girlfiend to check on her computer, and the CD seemed to run fine. Other CDs work just fine on my computer. Must be some kind of conflict, but what? Tried calling the AT&T number that suggested they could help with setup, and was first connected to the business center, they routed me to the laptop center, who routed me to the network center, who said they would have to bring in the Palm customer service and connected me to a Mac guy that dumped me back to a menu that took me to someone for whom English is a second language with whom I was trying to communicate over a very poor satellite connection. They made no sense anyway. telling me first that I couldn't have two desktops running (wrong, my girlfriend has my old Zire and the CD worked fine) and then insisting that the serial number on my device had to start with a P, when it clearly does not have any alpha characters in it. Gave up on that route of assistance. Managed to get the new ActiveSync installed from my girlfriends computer over the network. Great. Now let's get my 650 synced with Outlook (which I have not used at home) and see if we can move on. Nope. First I have to update Outlook 2000 from the old Win98 to my current XP. Find the old CD, and square that away. OK, now sync to Outlook. Nope. The sync program gives an error, saying it will only sync with Outlook 98, 2000, and XP(2002). Good grief. I have Outlook 2000, and the software apparently does not recognize it. If the Palm doesn't work, there is no reason for me to keep this phone, and I am very close to returning it and abandoning the Palm entirely when I upgrade to something that works, although I dread re-entering all that information.
Post relates to: Treo 750 (AT&T)
This question was solved.
View Solution.

Thanks for the feedback. Today I installed an Enterprise version of Office 2007 I purchased a while back, but had not yet installed. Microsoft presented a few challenges, but they were quickly resolved. I then downloaded the appropriate conduit from Palm, and synced the 650 with the handheld overwriting the computer. Then used Active Destop to sync the 750. Satisfied I had moved as much info as possible, I called AT&T and had them move the phone number to the new Treo.
Bonus! When the guy at AT&T called me on the new phone to verify it, he said it sounded better than my landline.
Sorry for the streaming paragraph. When it is late I tend to write like I think.
Dave
Post relates to: Treo 750 (AT&T)

I upgraded from iPhone 3GS to iPhone 6. Everything converted fine until I deleted an app in error. When I downloaded it from iTunes, my account is no longer recognized by the app's host servers. Can I go back and re-sync one app from my old phone?

I upgraded from iPhone 3GS to iPhone 6. Everything converted fine. Yesterday I deleted an app in error. When I downloaded the software it from iTunes ( did this many times on the old 3GS), my account is no longer recognized by the app's host servers (Playtika), even though it did after the initial conversion. Can I go back and re-sync just one app from my old phone?

Try deleting what is called the iPod Photo Cache.
http://support.apple.com/kb/TS1314

I have just downloaded the upgrade from Mountain Lion to Yosemite. In the process i am now unable to gain access to iTunes. The app on desktop no longer works and the install is not able to be opened.

I Have downloaded the upgrade from Mountain Lion to Yosemite. In thee process of so doing I have lost access to iTunes.
The app on desktop no longer opens the program and having downloaded and installed as per Apple instructions, can not make a connection.

Hi, drjbuchanan.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend going through when experiencing this issue.
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/en-us/ts3430
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/en-us/ht2311
Cheers,
Jason H.

Can't print from IE 8 after upgrading from Vista to Windows 7

My laptop (HP Elitebook 8530w) uses two HP printers: Color LaserJet CP3525x (at work) and Deskjet 6940 (at home). Both printers are accessed across a local network.
I recently upgraded from Vista Enterprise to Windows 7 Enterprise.
Everything still prints fine (from Word, Adobe Reader, Windows Photo Viewer, etc.), except for IE 8! When I try to print a web page from IE, it prints only the page header, and otherwise the sheet is empty. This symptom occurs on both printers. (And of course this worked fine before the upgrade.)
Any ideas? Thanks for any help.
Jeff
This question was solved.
View Solution.

(same poster)
If anyone else is having this problem, I found the solution on another forum (http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/920588e5-ccc4-4e24-83d6-606...).
Specifically, the following steps solved the problem:
1. If it doesn't already exist, create a directory named "Low" in your directory "C:\Users\<your_user_name>\AppData\Local\Temp\".
2. From a command prompt, issue this command: ICACLS C:\Users\<your_user_name>\AppData\Local\Temp\Low /setintegritylevel (OI)(CI)low
Jeff

Fields in read-only mode for BP transaction in upgrade from 4.72 to ECC6.0

Hello,
This is regarding the query for BP transaction in upgrade from 4.72 to ECC 6.0.
While creating BP / Changing BP system is disabling the fields in compnay code & sales area option. There is a SAP not provided 907860; and specified that the proplem is because of the delta customizing.
All the customization settings are as per the note. And the Synchronization Control is also activated. But still the fields are disabled only.
I have checked the field settings also in Cross-Application-Components & Logistic-Genral.
But these are not working for compnay code & sales area data.
please let me know if anyone has faced this type of problem / found any solution on this.
Best Regards,
Shubhada

SAP IMG -> Cross Application Components -> Master Data Synchronization  Synchronization Control -> Synchronization Control -> Activate Synchronization options
This setting allows you to activate synchronization of BP with R/3. Not maintaining the values may result in certain fields being read-only in BP.
Suggested Values:
Source Object: BP | Target Object: CUSTOMER | Active Indicator : X
Source Object: BP | Target Object: VENDOR | Active Indicator : X
Source Object: CUSTOMER | Target Object: BP | Active Indicator : X
Source Object: VENDOR | Target Object: BP | Active Indicator : X
Have you set all of the above settings??
BHARATH

Error in Access VBA Application when upgrading from Acrobat 8.0 to 9.0

Hello.
The company that I work for recently upgraded from Adobe Acrobat 8.0 to 9.0 and I`m experiencing some problems with my Access 2003 VBA Application that extracts text from PDF-files and insert it into a table. I have tried adding references to Adobe 9.0 Type Library, but still no luck. Anyone having any ideas for a workaround? See attatched image for error-message. Any help will be greatly appreciated!
Regards,
Steffan

Public Function lesPDF()
'On Error Resume Next
Dim MyDB As Database, EplanSet As DAO.Recordset, ResultSet As DAO.Recordset, SideSet As DAO.Recordset, TekstSet As DAO.Recordset
Dim AcroApp As CAcroApp
Dim AcroAVDoc As CAcroAVDoc
Dim AcroPDDoc As CAcroPDDoc
Dim AcroHiliteList As CAcroHiliteList
Dim AcroTextSelect As CAcroPDTextSelect
Dim PageNumber, PageContent, i, j
Dim Ferdig As Boolean
Dim StartPos, Length As Double
Dim PartSyntax() As String
Dim DocType() As String
Dim Content, strFileName, Temp As String
Dim k, Lengde As Integer
Plant = Form_Autoexec.cmbPlant.Value
Set AcroApp = CreateObject("AcroExch.App")
Set AcroAVDoc = CreateObject("AcroExch.AVDoc")
Set MyDB = DBEngine.Workspaces(0).Databases(0)
EplanSet.MoveLast
EplanSet.MoveFirst
Do Until EplanSet.EOF
    strFileName = EplanSet!path & EplanSet!File
    If AcroAVDoc.Open(strFileName, vbNull) <> True Then
        Exit Function
    End If
    Set AcroAVDoc = AcroApp.GetActiveDoc
    Set AcroPDDoc = AcroAVDoc.GetPDDoc
Here is some of the code, where the program stops is marked in red. This worked perfectly with Adobe 8.0. Thaks for any help or suggestions!

Upgrading from 10.4.11 to 10.5.7 possible?

Similar Messages

Maybe you are looking for