Upgrading from 11.1.1.2 to 11.1.2.1 question(s)
Hey guys, I have a question about upgrading Essbase. I'm pretty new to Essbase and most of my experience with it has to do with loading data and MAXL.
my environment is setup as follows:
App box 1 - Essbase 11.1.1.2 - AIX
App box 2 - Essbase 11.1.1.2 - AIX
Web box 1 - Websphere, APS, EAS, SS, Dodeca
Web box 2 - Websphere, APS, Dodeca
F5 Load balancer in front of the web tier
I believe they have APS and Dodeca clustered. App box 1 and 2 have different Essbase applications running on each box.
My first thought was to upgrade Essbase and migrate the cubes for both applications at once. Further down the road that could be 5-6 applications and it doesn't look so easy.
So my question is, is it possible to upgrade only one of the application boxes and web tier to 11.1.2.1?
Possible setup might look like this:
my environment is setup as follows:
App box 1 - Essbase 11.1.1.2 - AIX
App box 2 - Essbase 11.1.2.1 - AIX
Web box 1 - Websphere, APS, EAS, SS, Dodeca
Web box 2 - Websphere, APS, Dodeca, SS 11.1.2.1, EAS 11.1.2.1, APS too?
F5 Load balancer in front of the web tier
Would you upgrade all the web tier and just have App box 1 on an older version of Essbase?
If anyone has any suggestions on sites/material to catch up on it would be appreciated (I'm working my way through epm_install_11121, epm_install_start_here and epm_install_troubleshooting right now).
Thanks,
Phil Matre
John, thanks for taking the time to read over my issue. We got a hold of an Oracle engineer and this is what he had to say "Shared Services must be at the same level across all applications! So net is you can’t mix the two. Also the upgrade to 11.1.2.1 is NOT an in place upgrade, must be a new environment."
So the WebLogic part was another question bouncing around in my head. I guess I didn't want to believe I would have to use it. In the end it will probably save us some dollars on two WebSphere licences. The boss men will be happy about that. I hope all upgrades are this exciting!
Thanks,
Phil
Similar Messages
-
Upgrading from 4.7C to ECC 6.0: A rookie's question
Hi.. I'm a rookie abap guy, waiting to jump into my first upgrade project (which is also my first project in SAP). Can you tell briefly about the set of main procedures involved? My questions are the basic ones like who starts an upgrade? Is it the basis guys? How does it go on? And where does my role.. or rather a good abapper's role start? Thanks in advance..
hi Arun,
Technical Upgrade is only a version upgrade without any functionality changes.
The objects that are needed to be upgraded are:
Includes
Function Groups / Function Modules
Programs / Reports
OSS Notes
SAP Repository Objects
SAP Data Dictionary Objects
Domains, Data Elements
Tables, Structures and Views
Module Pools, Sub Routine pools
BDC Programs
Print Programs
SAP Scripts, Screens
User Exits
You have to aware of all related program like BDC's , Screens related errors and all dictionary related problems.
Some function modules may become obsolete, and some screens will change
abnd some new fields will be added in the new versions etc.
Also take care of SPAU and SPDD tcodes.
You should be able to know about Unicode concept in sap.
The upgrade team includes:
mySAP Technology staff (formerly know as SAP Basis staff)
Functional / business process staff
User owners / key users
Training staff
IT (network, servers, desktop, and so on)
Your network of contacts and peers
Partners or consultants
SAP
Your sales contact:
SAP Sales for direct customers
CBS provider for VAR customers
SAPlocalsupport
During planning for an upgrade, you must gather and prepare all materials,
including the:
ASAP Upgrade Roadmap
Upgrade manuals
Upgrade script
<b>Hope this is helpful, Do reward.</b> -
I'm not the type to normally write in forums but I just went through 2 days of customer service and technical support hell and thought I would share the experience with the sole motivation being to spare fellow TCS users the aggravation and make you aware of a possible disconnect between sales and technical support - know what you`re getting!!
Yesterday I purchased the upgrade from TCS 2.0 to TCS 2.5 from the Adobe online store as an electronic download. After receiving a confirmation email I logged into my Adobe account and noted that the download page contained 2 serial numbers, one for Photoshop CS5, one for Captivate 5 and then a zip folder for UPDATES only to Framemaker and Robohelp and also 2 language packs for text-to-speech for Captivate 5. Obviously I was missing links to Framemaker, Robohelp and Acrobat.
The goal of my purchase was to procure an additional licence in order to install TCS v 2.5 on 2 additional computers so, I had a sick feeling that I may have misunderstood what was offered in the upgrade; I then had the following conversation with Adobe`s Chat Live Now (excerpted from transcript):
Me: Hi. I just purchased the upgrade from TCS 2.0 to TCS 2.5. My expectation was that this contained all programs within the suite yet on my downloads the only programs that are listed are Photoshop CS5 and Captivate 5. Does this upgrade package not include the ability to install Framemaker, Robohelp and Acrobat. I purchased on the assumption that the upgrade would constitute an additional licence for these products as well. Was I wrong?
Perkins: ...TCS includes all programs, you need to select those programs while installing.
Me: Okay, I'm just downloading it now so I will confirm that it does, in fact, include all of the programs. So just to clarify, my original understanding was correct and the upgrade provides me with 2 additional licences for TCS?
Perkins: Yes. You can install 1 copy of the software on 2 computers with same Operating System.
Okay - fair enough, I then re-visited the Adobe Technical Communication Suite 2.5 web page under Upgrade--Reasons to Upgrade where it states:
``Work with full new versions of Adobe professional tools for technical communicators and help authors, including Adobe® FrameMaker® 9, Adobe RoboHelp® 8, Adobe® Captivate® 5, Adobe Acrobat® 9 Pro Extended, and Adobe Photoshop® CS5 software``.
Now to me, FULL means full versions. I subsequently entered customer service hell and spent an hour and a half on the phone being transferred through 5 different people, none of whom were familiar with the contents of the Technical Communication Suite. It took forever jsut to get them to understand that I weas upgrading from TCS version 2.0 and NOT trying to upgrade from Photoshop CS4 and Captivate 4 directly. Eventually my question as to whether I was entitled to an additional licence for Framemaker, Robohelp and Acrobat Pro Extended was elevated to Tier 2 and I was told I would be contacted by Adobe. Today I received a voicemail and email stating that I should install Framemaker, Robohelp and Acrobat Pro Extended from my original TCS v 2.0 installer. I subsequently did so (successfully) and then installed Captivate 5 without issue.
The next challenge arose with Photshop CS5 - the serial number, according to the installer, was invalid. Back to customer support who referred me to technical support - turns out the download link on my Adobe account download page was for a Chinese language-only version of Photoshop Extended which doesn`t even come with TCS 2.5! So, another 90 minutes on the phone throughout which I keep seeking clarification, does TCS 2.5 grant me an additional licence for Framemaker 9, Robohelp 8 and Acrobat 9 Pro Extended...
Technical Service states they can send me a physical disc with installers for Photoshop CS 5 and Captivate 5 and then CONFIRMED that I am NOT entitled to any additional licences for Framemaker, Robohelp or Acrobat, I am ONLY entitled to the 2 installs under the original TCS version 2 licence. This of course runs completely contrary to the literature on the website and my conversation with Live Chat Now. In disgust, I have submitted a refund request.
Just for kicks I decided to again try to clarify with Live Chat Now what products that I, as a customer, receive a licence for by purchasing the upgrade to TCS v 2.5 and have pasted the transcript of that chat as follows;
Me: Can you please confirm for me whether upgrading from the Adobe Technical Communication Suite version 2.0 to version 2.5 entitles me to 1 additional licence for ALL of the applications that constitute the Technical Communication Suite (i.e. Robohelp, Acrobat, Framemaker, Captivate, Photoshop and Presenter) OR does it merely entitle me to 1 licence to install Photoshop CS5 and Captivate 5 in conjunction with my pre-existing TCS 2.0 installation?
Morph: Give me a minute, I’m reading it.
Me: sure
Morph: When you place the order for upgrade, you will get new products.
Me: I understand that I will get Photoshop CS5 and Captivate 5 BUT do I also get Framemaker, Acrobat and Robohelp?
Morph: Adpbe eLearning Suite 2 includes: Adobe Captivate 5, Flash Professional CS5, Dreamweaver CS5, Photoshop CS5 Extended, Acrobat 9 Pro, Adobe Presenter 7 (Available only on Windows platform), Soundbooth CS5.
Morph: No.
Morph: Only Acrobat is Included.
Me: I am not talking about the e-Learning Suite, I am referring to the Technical Communication Suite
Morph: Oh okay, got you, first tell me, using which product you will be upgrading this from?
Me: TCS 2.0
Morph: Okay.
Morph: Yes, if you do this upgrade you will get Adobe FrameMaker 9, RoboHelp 8, Adobe Captivate 5, Photoshop CS5, Acrobat 9 Pro Extended, and Adobe Presenter 7
Me: so this will entitle me to 1 additional licence for all of these applications, over and above the licence I already own for the TCS version 2?
Morph: Correct, however, you may also be installing the software (Upgrade version) directly without uninstalling the previous version of the software.
Me: So just to clarify, if I purchase the upgrade and decide that I want to install on a completely different machine than the two computers that already have TCS version 2.0 installed (as entitled by my licence) then I will be able to, in effect, install the TCS 2.5 onto two completely different computers (as per the Adobe licence) so that, at the end of the day, I can actually have FOUR computers with TCS installed by virtue of the 2 licences that I should have - one from TCS version 2.0 and 1 licence from TCS version 2.5É
Morph: Purchasing the “upgrade” version product is nothing but a “full” version, but if you do not have the serial key for older version you can’t Install the upgrade, but for full version you do no need previous version serial number.
Morph: Correct.
Morph: You can simply purchase your upgrade and verify that you have the qualifying older product during the installation process.
Morph: If it's installed on your computer, the Adobe installer will either find it or prompt you to help it find the software for verification.
Morph: If it's not installed, you will be prompted to enter the qualifying serial number for the older version.
Me: Is the download file one individual installer or an installer for each application
Morph: It is one Indiviidual Installer.
Morph: When you download it will automatically Install every program in the Suite one-by-one.
Me: Okay, the reason I have been asking is that yesterday I made this purchase yet my download page had links only to Photoshop (a Chinese language only version of Photoshop Extended which does not come with the Suite) and Captivate. There was no link whatsoever for the other applications. I went through customer service and technical support and no one, and I mean no one, could answer the questions I`ve asked you. According to customer support and the serialization team, the upgrade to v. 2.5 DOES NOT include Framemaker, Robohelp and Acrobat. As a consumer I have absolutely no idea what is right and what is wrong. How am I supposed to make an informed purchase...
Morph: did you check on the link and confirmed that it does not Include the upgrade to version 2.5?
Me: Sorry - not clear what you mean, my receipt from the Adobe store was for TCS v 2.5
Morph: Like I said upgrade for the Technical communicate suite Includes Adobe FrameMaker 9, RoboHelp 8, Adobe Captivate 5, Photoshop CS5, Acrobat 9 Pro Extended, and Adobe Presenter 7, and you should be getting all as a single download link, seems like you are not able to make it with the link to Install Individual products altogether, so you need to contact our Customer Service at 800-833-6687. for the
Morph: precise Info.
Me: I went through that route yesterday and today and they told me that the upgrade DOES NOT include the other applications. As well, I noticed that the download file size for the upgrade is 1 half the size of the full version - obviously something is missing
Me: The information you are telling me is the precise opposite of what they told me. How do I, as a consumer, get the proper answer
Morph: upgrade do Includes the product I have mentioned above.
Me: I know you`re trying to assist but I`m flummoxed - my case was escalated to Tier 2 and they told me it doesn`t include the other applications
Morph: up to some extent i can help being a sales team member, ant only customer people generate the links and have access to customer account to check what really went wrong.
Me: Is it possible to have a senior sales rep contact me - this matter of a `simple` upgrade has consumed a ridiculous amount of time. As far as my issue - Adobe tells me nothing was wrong and that the upgrade is only a licence for Photoshop and Captivate
Morph: Okay,Just a minute.
Morph: You can contact our Sales Team on 1-800-585-0774.
So, at the end of the day, sales tells me that upgrading to v 2.5 grants me an additional licence for ALL applications in the suite whereas Adobe`s own technical support has told me this is not true. Again I ask, how does a consumer make an informed choice...
I`ve been buying Adobe software for both Mac and PC since Creative Suite 2 came out and this has absolutely been the most frustrating experience I have ever had. I get great use out of the Techncial Communication Suite and thought it would be nice to have an additional licence but at the end of the day I have decided it certainly was not worth the hassle - particularly when Adobe itself can`t figure out what I am entitled to!!
I am a fan of Adobe`s software but honestly, is business that good that you can treat your customers this way????Hi. I suspect that may indeed be the case. If so, that's fine but nowhere is it clearly articulated what a user gains by purchasing the upgrade (and I am specifically referring to an upgrade from TCS version 2 to v 2.5) and certainly sales (as evidenced by my chat transcripts where I believe I asked quite specific questions) are advising customers that you will, in fact, gain an additional licence to ALL components of the TCS by upgrading.
If it had been clearly articulated on the Adobe TCS 2.5 website that an upgrade from TCS version 2 only entitles users to install Photoshop CS5 and Captivate 5 in conjunction with the existing installation of the other components of TCS 2 - or - better yet, stated clearly that the upgrade from version 2 to 2.5 does not entitle the end-user to an additional licence for Acrobat Pro Extended, Framemaker, Robohelp and Presenter 7 then that would allow me, as a consumer, to make an informed decision whether to make the purchase. Since that is not the case, and Adobe's sales representatives are clearly advising customers otherwise, I felt compelled to post this so others don't waste their time as I did trying to sort it out. At one point I was advised that I should use my existing TCS version 2 installer to install Acrobat etc but received contradictory answers as to whether I was entitled to an additional licence for these products. At no time during my first hour and forty-five minute conversation, my second ninety minute conversation nor my third, and last, twenty minute conversation was anyone able to clearly articulate what you have stated - and - that still leaves the fact that the text on Adobe's website is misleading.
BTW - why I received a download link from Adobe for a Chinese-language-only version of Photoshop CS5 Extended is still a mystery
At the end of the day, I think the TCS (while not perfect) is a very useful tool and I will, in all probability, upgrade to the full version of TCS 3 which will, no doubt, constitute a full licence for all components of the suite. I am not attributing malicious intent to the Adobe employees, but I am saying that they themselves seem confused about what is included in the upgrade and provided contradictory statements. If Adobe employees can't provide a straight, cut-to-the-chase answer about what seems a straightforward question then that certainly creates unnecessary confusion for the customer. -
Installing upgrading from 8.1.7 to 9.2.0
Hi we are upgrading from 8.1.7 to 9.2.0. Some questions :
1-what is oraInst.loc used for ?
2-what should I modify in this file before beginning to Install and upgrade ?
3-in OUI , in file locations window I'm prompted to give Oracle Home name . What is Oracle home name ( I know that $ORACLE_HOME is a path where Oracle DB server would be installed, but Oracle Home name ? I don't understand. And what should I give as Oracle Home Name and for what it would be necessary ?
Many thanks before.1-what is oraInst.loc used for ?A file which contains some string definition like inventory_loc=/home/dba/oraInventory
2-what should I modify in this file before beginning to Install and upgrade ?Nothing, install the new oracle version.
3-in OUI , in file locations window I'm prompted to give Oracle Home name .
What is Oracle home name An identifier of a Oracle Home.
That's the name which appear in the programs list bar under windows (start>all programs>Oracle - OracleHomeName). That's too the beginning of the oracle windows services like OracleHomeNameTNSListener etc...
The home name can be up to 16 alphanumeric characters. The only special character allowed in the home name is the underscore.
=> http://download-uk.oracle.com/docs/cd/B10501_01/win.920/a95491/preface.htm#970818
And what should I give as Oracle Home Name and for what it would be necessary ?Generally, it's like OraHome<version>, eg : OracleHome92, but that's what do you want.
Nicolas. -
Finger print reader not working 'post' Windows 10 upgrade from windows 7
Ok I have succumbed to upgrading to Windows 10 as I did to Windows 8, perhaps this time I won't 'rollback' but already things don't look good . As a part of the upgrade the Windows 10 the installer spat about the HP Protect Tools Security Manager and asked me to uninstall in order to proceed with the upgrade. I started to get a little concerned from this point on that I would lose my fingerprint reader as a result of going to Win 10 and low and behold that’s happened. It was only after following several threads online that I originally got the fingerprint reader working on windows 7. I went in and out of the BIOS resetting this and that but in the end despite having all the HP drivers for the readers (latest ones) the only thing that ‘fixed’ my fingerprint reader was the installation of the HP Protect Tools Security Software. So the question is where’s the Windows 10 version of the HP Protect Tools Security Software or the ‘fix’ is there one?? Hate to think an operating system is blocking such a great HP laptop feature!
I want to upgrade from windows7 to windows10 (probook 4350s) I have the same question about compatible version, which I hope HP or somebody answer soon and help us...I also cant uninstall my protect tools as upgrade needs me to.I want to know is it possible for finger scanner to work in windows10 after uninstalling HPPTM. thanks,Nazanin Mirzabeigi
-
I recently upgraded from 3Gs to Iphone4 and want to use my old 3Gs as an ipod. how can i update
the user ID on the 3gs to a new one that I have as it is still showing a previous user ID?Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.
-
Is it really possible to upgrade from a Treo 650 to a Treo 750?
I am not a very happy customer at the moment, but any help would be greatly appreciated. I upgraded from my old Palm Tungsten to a Zire, then to a Cingular Treo 650, combining three devices into one. I have since discovered that the Treo 650 seems to have a faulty transmission mode, as I can rarely be clearly understood by whomever I call. Am on the second (or third, I have lost track) and continue to have the same problem. I get five bars of reception but can't be understood on the other end. A bit of a problem when one is trying to call 911. Am constantly told I am "breaking up". The repair shop says it "Can't duplicate the problem". OK, then I do not want to give up all the info I have stored in the fool thing, and the 750 seems to have a different system, so I thought I would try that. All the stuff I could find seemed to indicate it wouldn't be a problem to upgrade. When the 750 arrived, I tried to install the software from the CD on my Windows XP computer. No dice. Setup encounters an error and closes. Can't even look at the files, because setup tries to run any time I access the CD. From any drive. Gave it to my girlfiend to check on her computer, and the CD seemed to run fine. Other CDs work just fine on my computer. Must be some kind of conflict, but what? Tried calling the AT&T number that suggested they could help with setup, and was first connected to the business center, they routed me to the laptop center, who routed me to the network center, who said they would have to bring in the Palm customer service and connected me to a Mac guy that dumped me back to a menu that took me to someone for whom English is a second language with whom I was trying to communicate over a very poor satellite connection. They made no sense anyway. telling me first that I couldn't have two desktops running (wrong, my girlfriend has my old Zire and the CD worked fine) and then insisting that the serial number on my device had to start with a P, when it clearly does not have any alpha characters in it. Gave up on that route of assistance. Managed to get the new ActiveSync installed from my girlfriends computer over the network. Great. Now let's get my 650 synced with Outlook (which I have not used at home) and see if we can move on. Nope. First I have to update Outlook 2000 from the old Win98 to my current XP. Find the old CD, and square that away. OK, now sync to Outlook. Nope. The sync program gives an error, saying it will only sync with Outlook 98, 2000, and XP(2002). Good grief. I have Outlook 2000, and the software apparently does not recognize it. If the Palm doesn't work, there is no reason for me to keep this phone, and I am very close to returning it and abandoning the Palm entirely when I upgrade to something that works, although I dread re-entering all that information.
Post relates to: Treo 750 (AT&T)
This question was solved.
View Solution.Thanks for the feedback. Today I installed an Enterprise version of Office 2007 I purchased a while back, but had not yet installed. Microsoft presented a few challenges, but they were quickly resolved. I then downloaded the appropriate conduit from Palm, and synced the 650 with the handheld overwriting the computer. Then used Active Destop to sync the 750. Satisfied I had moved as much info as possible, I called AT&T and had them move the phone number to the new Treo.
Bonus! When the guy at AT&T called me on the new phone to verify it, he said it sounded better than my landline.
Sorry for the streaming paragraph. When it is late I tend to write like I think.
Dave
Post relates to: Treo 750 (AT&T) -
I upgraded from iPhone 3GS to iPhone 6. Everything converted fine. Yesterday I deleted an app in error. When I downloaded the software it from iTunes ( did this many times on the old 3GS), my account is no longer recognized by the app's host servers (Playtika), even though it did after the initial conversion. Can I go back and re-sync just one app from my old phone?
Try deleting what is called the iPod Photo Cache.
http://support.apple.com/kb/TS1314 -
I Have downloaded the upgrade from Mountain Lion to Yosemite. In thee process of so doing I have lost access to iTunes.
The app on desktop no longer opens the program and having downloaded and installed as per Apple instructions, can not make a connection.Hi, drjbuchanan.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend going through when experiencing this issue.
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/en-us/ts3430
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/en-us/ht2311
Cheers,
Jason H. -
Can't print from IE 8 after upgrading from Vista to Windows 7
My laptop (HP Elitebook 8530w) uses two HP printers: Color LaserJet CP3525x (at work) and Deskjet 6940 (at home). Both printers are accessed across a local network.
I recently upgraded from Vista Enterprise to Windows 7 Enterprise.
Everything still prints fine (from Word, Adobe Reader, Windows Photo Viewer, etc.), except for IE 8! When I try to print a web page from IE, it prints only the page header, and otherwise the sheet is empty. This symptom occurs on both printers. (And of course this worked fine before the upgrade.)
Any ideas? Thanks for any help.
Jeff
This question was solved.
View Solution.(same poster)
If anyone else is having this problem, I found the solution on another forum (http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/920588e5-ccc4-4e24-83d6-606...).
Specifically, the following steps solved the problem:
1. If it doesn't already exist, create a directory named "Low" in your directory "C:\Users\<your_user_name>\AppData\Local\Temp\".
2. From a command prompt, issue this command: ICACLS C:\Users\<your_user_name>\AppData\Local\Temp\Low /setintegritylevel (OI)(CI)low
Jeff -
Fields in read-only mode for BP transaction in upgrade from 4.72 to ECC6.0
Hello,
This is regarding the query for BP transaction in upgrade from 4.72 to ECC 6.0.
While creating BP / Changing BP system is disabling the fields in compnay code & sales area option. There is a SAP not provided 907860; and specified that the proplem is because of the delta customizing.
All the customization settings are as per the note. And the Synchronization Control is also activated. But still the fields are disabled only.
I have checked the field settings also in Cross-Application-Components & Logistic-Genral.
But these are not working for compnay code & sales area data.
please let me know if anyone has faced this type of problem / found any solution on this.
Best Regards,
ShubhadaSAP IMG -> Cross Application Components -> Master Data Synchronization  Synchronization Control -> Synchronization Control -> Activate Synchronization options
This setting allows you to activate synchronization of BP with R/3. Not maintaining the values may result in certain fields being read-only in BP.
Suggested Values:
Source Object: BP | Target Object: CUSTOMER | Active Indicator : X
Source Object: BP | Target Object: VENDOR | Active Indicator : X
Source Object: CUSTOMER | Target Object: BP | Active Indicator : X
Source Object: VENDOR | Target Object: BP | Active Indicator : X
Have you set all of the above settings??
BHARATH -
Upgrading from Mac OS 8.6 to 9.1 on iMac G3 333
Hello all,
I recently inherited (or my mother did rather) an old iMac G3 333 mhz machine. It has 96 megs of RAM currently, and is running OS 8.6. I want to upgrade the machine to at least 9.1 so I purchased a Mac OS 9.1 software install/restore disc set on eBay.
When I load the disc into the drive it says it's a 9.1 G4 software disc. I tried booting from the disc and it doesn't seem to work, question mark on the folder appears, then goes to a smiley face, then goes to something about an unrecoverable trap error or something to that effect.
If I put in the restore CD in while 8.6 is up and running and try to restore/install it says it will not let me with the current configuration, but if I put in the software disc (I got two discs, a software disc and a restore disc) it allows me to attempt the install, but says that I need to install the latest firmware which is supposed to be in the "CD Extras" folder, but as far as I can see, is not there. These are NOT CD-R copies but ORIGINAL restore/software discs, I believe they came from a G4 machine.
If anyone could point me in the right direction or give me some advice on how to get this working it'd be much appreciated. I tried burning the firmware upgrade (the 1.2 firmware for the 333 that is recommended on the apple site) on my brother's mac using toast, but it doesn't seem like this old G3 will read CD-R's. Additionally, the internet browsing software is so old that I can't even do something like email it to myself because Yahoo mail doesn't support my browser!
Please help! Any advice would be greatly appreciated. Thanks in advance!
JustinHi, Curmudgeon. The G4-specific discs you bought won't work on a G3. You'll need to obtain a retail (not model-specific) OS 9.0.4, 9.1 or 9.2.1 installer CD if you want to upgrade beyond OS 8.6.
But let me ask: do you have a pressing reason to upgrade the OS on this old iMac? Do you have some hardware or software that requires OS 9? OS 8.6 is a fine operating system for an early iMac or any other Mac of that vintage, and OS 9 doesn't offer much that isn't available in 8.6. If you can make do with what's already installed, my recommendation is that you do so, saving a little money and hassle in the bargain.
As for web browsers, I don't think you're going to find OS 9's selection of available browsers much larger than that for OS 8.6. All the browsers that will run in either OS are long in the tooth now, and won't properly handle a lot of modern web sites. -
Error in Access VBA Application when upgrading from Acrobat 8.0 to 9.0
Hello.
The company that I work for recently upgraded from Adobe Acrobat 8.0 to 9.0 and I`m experiencing some problems with my Access 2003 VBA Application that extracts text from PDF-files and insert it into a table. I have tried adding references to Adobe 9.0 Type Library, but still no luck. Anyone having any ideas for a workaround? See attatched image for error-message. Any help will be greatly appreciated!
Regards,
SteffanPublic Function lesPDF()
'On Error Resume Next
Dim MyDB As Database, EplanSet As DAO.Recordset, ResultSet As DAO.Recordset, SideSet As DAO.Recordset, TekstSet As DAO.Recordset
Dim AcroApp As CAcroApp
Dim AcroAVDoc As CAcroAVDoc
Dim AcroPDDoc As CAcroPDDoc
Dim AcroHiliteList As CAcroHiliteList
Dim AcroTextSelect As CAcroPDTextSelect
Dim PageNumber, PageContent, i, j
Dim Ferdig As Boolean
Dim StartPos, Length As Double
Dim PartSyntax() As String
Dim DocType() As String
Dim Content, strFileName, Temp As String
Dim k, Lengde As Integer
Plant = Form_Autoexec.cmbPlant.Value
Set AcroApp = CreateObject("AcroExch.App")
Set AcroAVDoc = CreateObject("AcroExch.AVDoc")
Set MyDB = DBEngine.Workspaces(0).Databases(0)
EplanSet.MoveLast
EplanSet.MoveFirst
Do Until EplanSet.EOF
strFileName = EplanSet!path & EplanSet!File
If AcroAVDoc.Open(strFileName, vbNull) <> True Then
Exit Function
End If
Set AcroAVDoc = AcroApp.GetActiveDoc
Set AcroPDDoc = AcroAVDoc.GetPDDoc
Here is some of the code, where the program stops is marked in red. This worked perfectly with Adobe 8.0. Thaks for any help or suggestions! -
Upgrade from R/3 4.6C to ECC 6.00 : languages
Hi,
We're trying to upgrade from SAP R/3 4.6C to ECC 6.00 under NT environment, having Oracle as database. During the preparation phase, we got the following error, and in our current SAP system R/3 we have 2 additional languages NL and FR (EN and DE are already in), can you please explain why this phase is blocking in this step, and if I continue I've to do a full language import, thanks in advance.
The following language(s) could not be updated yet:
- French for component EA-APPL
- French for component EA-DFPS
- French for component EA-FINSERV
- French for component EA-GLTRADE
- French for component EA-HR
- French for component EA-IPPE
- French for component EA-PS
- French for component EA-RETAIL
- French for component ECC-DIMP
- French for component ERECRUIT
- French for component FI-CA
- French for component FI-CAX
- French for component FINBASIS
- French for component INSURANCE
- French for component IS-CWM
- French for component IS-H
- French for component IS-M
- French for component IS-OIL
- French for component IS-PS-CA
- French for component IS-UT
- French for component LSOFE
- French for component PI_BASIS
- French for component SAP_ABA
- French for component SAP_AP
- French for component SAP_APPL
- French for component SAP_BASIS
- French for component SAP_BW
- French for component SAP_HR
- French for component SEM-BW
- French for component ST-PI
- Dutch for component EA-APPL
- Dutch for component EA-DFPS
- Dutch for component EA-FINSERV
- Dutch for component EA-GLTRADE
- Dutch for component EA-HR
- Dutch for component EA-IPPE
- Dutch for component EA-PS
- Dutch for component EA-RETAIL
- Dutch for component ECC-DIMP
- Dutch for component ERECRUIT
- Dutch for component FI-CA
- Dutch for component FI-CAX
- Dutch for component FINBASIS
- Dutch for component INSURANCE
- Dutch for component IS-CWM
- Dutch for component IS-H
- Dutch for component IS-M
- Dutch for component IS-OIL
- Dutch for component IS-PS-CA
- Dutch for component IS-UT
- Dutch for component LSOFE
- Dutch for component PI_BASIS
- Dutch for component SAP_ABA
- Dutch for component SAP_AP
- Dutch for component SAP_APPL
- Dutch for component SAP_BASIS
- Dutch for component SAP_BW
- Dutch for component SAP_HR
- Dutch for component SEM-BW
- Dutch for component ST-PI
Please mount another Language Disk for these language(s).
If you do not have further Language Disk(s), you may
continue, but the languages mentioned above will be lost
after the upgrade. A full language import has to be
performed after the upgrade to reinstall the language(s).
? continue
? cancelHi Markus,
I've introduce the following information:
> MOUNT POINT 07 = S:\export\Data\CDLAN2
> MOUNT POINT 01 = S:\export\Data\KN_WINDOWS_X86_64_AUPG
> MOUNT POINT 06 = S:\export\Data\CDLAN1
> MOUNT POINT 05 = S:\export\Data\CD3
> MOUNT POINT 03 = S:\export\Data\CD1
> MOUNT POINT 08 = S:\export\Data\UMN_WINDOWS_X86_64
> MOUNT POINT 02 = S:\export\Data\KN_WINDOWS_X86_64
> MOUNT POINT 04 = S:\export\Data\CD2
And in mount point 06/07 we have the languages.
The content of the trace file is:
here's the complete trace:
2007/07/05 16:35:01 *****************************
2007/07/05 16:35:01 Checking directories ...
2007/07/05 16:35:01 Searching for Data Carrier labeled AOXUPGR
Adding path: S:\export\Data\KN_WINDOWS_X86_64_AUPG
2007/07/05 16:35:01 Working on S:\export\Data\KN_WINDOWS_X86_64_AUPG ... no matching label
Adding path: S:\export\Data\KN_WINDOWS_X86_64
2007/07/05 16:35:01 Working on S:\export\Data\KN_WINDOWS_X86_64 ... no matching label
Adding path: S:\export\Data\CD1
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD1
Adding path: S:\export\Data\CD1\UPG1
Adding path: S:\export\Data\CD1\UPG2
Adding path: S:\export\Data\CD1\UPG3
Adding path: S:\export\Data\CD1\UPG4
Adding path: S:\export\Data\CD1\UPG5
Adding path: S:\export\Data\CD1\UPG6
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD1 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG4 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG5 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG6 ... no matching label
Adding path: S:\export\Data\CD2
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD2
Adding path: S:\export\Data\CD2\UPG7
Adding path: S:\export\Data\CD2\UPG8
Adding path: S:\export\Data\CD2\UPG9
Adding path: S:\export\Data\CD2\UPG10
Adding path: S:\export\Data\CD2\UPG11
Adding path: S:\export\Data\CD2\UPG12
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD2 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG7 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG8 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG9 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG10 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG11 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG12 ... no matching label
Adding path: S:\export\Data\CD3
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD3
Adding path: S:\export\Data\CD3\UPG13
Adding path: S:\export\Data\CD3\UPG14
Adding path: S:\export\Data\CD3\UPG15
Adding path: S:\export\Data\CD3\UPG16
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD3 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG13 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG14 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG15 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG16 ... no matching label
Adding path: S:\export\Data\CDLAN1
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CDLAN1
Adding path: S:\export\Data\CDLAN1\LANG1
Adding path: S:\export\Data\CDLAN1\LANG2
Adding path: S:\export\Data\CDLAN1\LANG3
Adding path: S:\export\Data\CDLAN1\LANG4
2007/07/05 16:35:01 Directory structure below S:\export\Data\CDLAN1 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG4 ... no matching label
Adding path: S:\export\Data\CDLAN2
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CDLAN2
Adding path: S:\export\Data\CDLAN2\LANG5
Adding path: S:\export\Data\CDLAN2\LANG6
2007/07/05 16:35:01 Directory structure below S:\export\Data\CDLAN2 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2\LANG5 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2\LANG6 ... no matching label
Adding path: S:\export\Data\UMN_WINDOWS_X86_64
2007/07/05 16:35:01 Working on S:\export\Data\UMN_WINDOWS_X86_64 ... no matching label
Regards,
A.Kamel -
I've recently completed a database upgrade from 10.2.0.3 to 11.2.0.1 using the DBUA.
I've since encountered a slowdown when running a script which drops and recreates a series of ~250 tables. The script normally runs in around 19 seconds. After the upgrade, the script requires ~2 minutes to run.
By chance has anyone encountered something similar?
The problem may be related to the behavior of an "after CREATE on schema" trigger which grants select privileges to a role through the use of a dbms_job call; between 10g and the database that was upgraded from 10G to 11g. Currently researching this angle.
I will be using the following table creation DDL for this abbreviated test case:
create table ALLIANCE (
ALLIANCEID NUMBER(10) not null,
NAME VARCHAR2(40) not null,
CREATION_DATE DATE,
constraint PK_ALLIANCE primary key (ALLIANCEID)
using index
tablespace LIVE_INDEX
tablespace LIVE_DATA;When calling the above DDL, an "after CREATE on schema" trigger is fired which schedules a job to immediately run to grant select privilege to a role for the table which was just created:
create or replace
trigger select_grant
after CREATE on schema
declare
l_str varchar2(255);
l_job number;
begin
if ( ora_dict_obj_type = 'TABLE' ) then
l_str := 'execute immediate "grant select on ' ||
ora_dict_obj_name ||
' to select_role";';
dbms_job.submit( l_job, replace(l_str,'"','''') );
end if;
end;
{code}
Below I've included data on two separate test runs. The first is on the upgraded database and includes optimizer parameters and an abbreviated TKPROF. I've also, included the offending sys generate SQL which is not issued when the same test is run on a 10g environment that has been set up with a similar test case. The 10g test run's TKPROF is also included below.
The version of the database is 11.2.0.1.
These are the parameters relevant to the optimizer for the test run on the upgraded 11g SID:
{code}
SQL> show parameter optimizer
NAME TYPE VALUE
optimizer_capture_sql_plan_baselines boolean FALSE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 11.2.0.1
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
optimizer_secure_view_merging boolean TRUE
optimizer_use_invisible_indexes boolean FALSE
optimizer_use_pending_statistics boolean FALSE
optimizer_use_sql_plan_baselines boolean TRUE
SQL> show parameter db_file_multi
NAME TYPE VALUE
db_file_multiblock_read_count integer 8
SQL> show parameter db_block_size
NAME TYPE VALUE
db_block_size integer 8192
SQL> show parameter cursor_sharing
NAME TYPE VALUE
cursor_sharing string EXACT
SQL> column sname format a20
SQL> column pname format a20
SQL> column pval2 format a20
SQL> select sname, pname, pval1, pval2 from sys.aux_stats$;
SNAME PNAME PVAL1 PVAL2
SYSSTATS_INFO STATUS COMPLETED
SYSSTATS_INFO DSTART 03-11-2010 16:33
SYSSTATS_INFO DSTOP 03-11-2010 17:03
SYSSTATS_INFO FLAGS 0
SYSSTATS_MAIN CPUSPEEDNW 713.978495
SYSSTATS_MAIN IOSEEKTIM 10
SYSSTATS_MAIN IOTFRSPEED 4096
SYSSTATS_MAIN SREADTIM 1565.746
SYSSTATS_MAIN MREADTIM
SYSSTATS_MAIN CPUSPEED 2310
SYSSTATS_MAIN MBRC
SYSSTATS_MAIN MAXTHR
SYSSTATS_MAIN SLAVETHR
13 rows selected.
{code}
Output from TKPROF on the 11g SID:
{code}
create table ALLIANCE (
ALLIANCEID NUMBER(10) not null,
NAME VARCHAR2(40) not null,
CREATION_DATE DATE,
constraint PK_ALLIANCE primary key (ALLIANCEID)
using index
tablespace LIVE_INDEX
tablespace LIVE_DATA
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 4 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.00 0 0 4 0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 324
{code}
... large section omitted ...
Here is the performance hit portion of the TKPROF on the 11g SID:
{code}
SQL ID: fsbqktj5vw6n9
Plan Hash: 1443566277
select next_run_date, obj#, run_job, sch_job
from
(select decode(bitand(a.flags, 16384), 0, a.next_run_date,
a.last_enabled_time) next_run_date, a.obj# obj#,
decode(bitand(a.flags, 16384), 0, 0, 1) run_job, a.sch_job sch_job from
(select p.obj# obj#, p.flags flags, p.next_run_date next_run_date,
p.job_status job_status, p.class_oid class_oid, p.last_enabled_time
last_enabled_time, p.instance_id instance_id, 1 sch_job from
sys.scheduler$_job p where bitand(p.job_status, 3) = 1 and
((bitand(p.flags, 134217728 + 268435456) = 0) or
(bitand(p.job_status, 1024) <> 0)) and bitand(p.flags, 4096) = 0 and
p.instance_id is NULL and (p.class_oid is null or (p.class_oid is
not null and p.class_oid in (select b.obj# from sys.scheduler$_class b
where b.affinity is null))) UNION ALL select
q.obj#, q.flags, q.next_run_date, q.job_status, q.class_oid,
q.last_enabled_time, q.instance_id, 1 from sys.scheduler$_lightweight_job
q where bitand(q.job_status, 3) = 1 and ((bitand(q.flags, 134217728 +
268435456) = 0) or (bitand(q.job_status, 1024) <> 0)) and
bitand(q.flags, 4096) = 0 and q.instance_id is NULL and (q.class_oid
is null or (q.class_oid is not null and q.class_oid in (select
c.obj# from sys.scheduler$_class c where
c.affinity is null))) UNION ALL select j.job, 0,
from_tz(cast(j.next_date as timestamp), to_char(systimestamp,'TZH:TZM')
), 1, NULL, from_tz(cast(j.next_date as timestamp),
to_char(systimestamp,'TZH:TZM')), NULL, 0 from sys.job$ j where
(j.field1 is null or j.field1 = 0) and j.this_date is null) a order by
1) where rownum = 1
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 1 0.47 0.47 0 9384 0 1
total 3 0.48 0.48 0 9384 0 1
Misses in library cache during parse: 1
Optimizer mode: CHOOSE
Parsing user id: SYS (recursive depth: 1)
Rows Row Source Operation
1 COUNT STOPKEY (cr=9384 pr=0 pw=0 time=0 us)
1 VIEW (cr=9384 pr=0 pw=0 time=0 us cost=5344 size=6615380 card=194570)
1 SORT ORDER BY STOPKEY (cr=9384 pr=0 pw=0 time=0 us cost=5344 size=11479630 card=194570)
194790 VIEW (cr=9384 pr=0 pw=0 time=537269 us cost=2563 size=11479630 card=194570)
194790 UNION-ALL (cr=9384 pr=0 pw=0 time=439235 us)
231 FILTER (cr=68 pr=0 pw=0 time=920 us)
231 TABLE ACCESS FULL SCHEDULER$_JOB (cr=66 pr=0 pw=0 time=690 us cost=19 size=13157 card=223)
1 TABLE ACCESS BY INDEX ROWID SCHEDULER$_CLASS (cr=2 pr=0 pw=0 time=0 us cost=1 size=40 card=1)
1 INDEX UNIQUE SCAN SCHEDULER$_CLASS_PK (cr=1 pr=0 pw=0 time=0 us cost=0 size=0 card=1)(object id 5056)
0 FILTER (cr=3 pr=0 pw=0 time=0 us)
0 TABLE ACCESS FULL SCHEDULER$_LIGHTWEIGHT_JOB (cr=3 pr=0 pw=0 time=0 us cost=2 size=95 card=1)
0 TABLE ACCESS BY INDEX ROWID SCHEDULER$_CLASS (cr=0 pr=0 pw=0 time=0 us cost=1 size=40 card=1)
0 INDEX UNIQUE SCAN SCHEDULER$_CLASS_PK (cr=0 pr=0 pw=0 time=0 us cost=0 size=0 card=1)(object id 5056)
194559 TABLE ACCESS FULL JOB$ (cr=9313 pr=0 pw=0 time=167294 us cost=2542 size=2529254 card=194558)
{code}
and the totals at the end of the TKPROF on the 11g SID:
{code}
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 2 0.00 0.00 0 0 4 0
Fetch 0 0.00 0.00 0 0 0 0
total 3 0.00 0.00 0 0 4 0
Misses in library cache during parse: 1
Misses in library cache during execute: 1
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 70 0.00 0.00 0 0 0 0
Execute 85 0.01 0.01 0 62 208 37
Fetch 49 0.48 0.49 0 9490 0 35
total 204 0.51 0.51 0 9552 208 72
Misses in library cache during parse: 5
Misses in library cache during execute: 3
35 user SQL statements in session.
53 internal SQL statements in session.
88 SQL statements in session.
Trace file: 11gSID_ora_17721.trc
Trace file compatibility: 11.1.0.7
Sort options: default
1 session in tracefile.
35 user SQL statements in trace file.
53 internal SQL statements in trace file.
88 SQL statements in trace file.
51 unique SQL statements in trace file.
1590 lines in trace file.
18 elapsed seconds in trace file.
{code}
The version of the database is 10.2.0.3.0.
These are the parameters relevant to the optimizer for the test run on the 10g SID:
{code}
SQL> show parameter optimizer
NAME TYPE VALUE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 10.2.0.3
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
optimizer_secure_view_merging boolean TRUE
SQL> show parameter db_file_multi
NAME TYPE VALUE
db_file_multiblock_read_count integer 8
SQL> show parameter db_block_size
NAME TYPE VALUE
db_block_size integer 8192
SQL> show parameter cursor_sharing
NAME TYPE VALUE
cursor_sharing string EXACT
SQL> column sname format a20
SQL> column pname format a20
SQL> column pval2 format a20
SQL> select sname, pname, pval1, pval2 from sys.aux_stats$;
SNAME PNAME PVAL1 PVAL2
SYSSTATS_INFO STATUS COMPLETED
SYSSTATS_INFO DSTART 09-24-2007 11:09
SYSSTATS_INFO DSTOP 09-24-2007 11:09
SYSSTATS_INFO FLAGS 1
SYSSTATS_MAIN CPUSPEEDNW 2110.16949
SYSSTATS_MAIN IOSEEKTIM 10
SYSSTATS_MAIN IOTFRSPEED 4096
SYSSTATS_MAIN SREADTIM
SYSSTATS_MAIN MREADTIM
SYSSTATS_MAIN CPUSPEED
SYSSTATS_MAIN MBRC
SYSSTATS_MAIN MAXTHR
SYSSTATS_MAIN SLAVETHR
13 rows selected.
{code}
Now for the TKPROF of a mirrored test environment running on a 10G SID:
{code}
create table ALLIANCE (
ALLIANCEID NUMBER(10) not null,
NAME VARCHAR2(40) not null,
CREATION_DATE DATE,
constraint PK_ALLIANCE primary key (ALLIANCEID)
using index
tablespace LIVE_INDEX
tablespace LIVE_DATA
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.01 0 2 16 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.01 0.01 0 2 16 0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 113
{code}
... large section omitted ...
Totals for the TKPROF on the 10g SID:
{code}
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 1 0.00 0.02 0 0 0 0
Execute 1 0.00 0.00 0 2 16 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.02 0 2 16 0
Misses in library cache during parse: 1
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 65 0.01 0.01 0 1 32 0
Execute 84 0.04 0.09 20 90 272 35
Fetch 88 0.00 0.10 30 281 0 64
total 237 0.07 0.21 50 372 304 99
Misses in library cache during parse: 38
Misses in library cache during execute: 32
10 user SQL statements in session.
76 internal SQL statements in session.
86 SQL statements in session.
Trace file: 10gSID_ora_32003.trc
Trace file compatibility: 10.01.00
Sort options: default
1 session in tracefile.
10 user SQL statements in trace file.
76 internal SQL statements in trace file.
86 SQL statements in trace file.
43 unique SQL statements in trace file.
949 lines in trace file.
0 elapsed seconds in trace file.
{code}
Edited by: user8598842 on Mar 11, 2010 5:08 PMSo while this certainly isn't the most elegant of solutions, and most assuredly isn't in the realm of supported by Oracle...
I've used the DBMS_IJOB.DROP_USER_JOBS('username'); package to remove the 194558 orphaned job entries from the job$ table. Don't ask, I've no clue how they all got there; but I've prepared some evil looks to unleash upon certain developers tomorrow morning.
Not being able to reorganize the JOB$ table to free the now wasted ~67MB of space I've opted to create a new index on the JOB$ table to sidestep the full table scan.
CREATE INDEX SYS.JOB_F1_THIS_NEXT ON SYS.JOB$ (FIELD1, THIS_DATE, NEXT_DATE) TABLESPACE SYSTEM;The next option would be to try to find a way to grant the select privilege to the role without using the aforementioned "after CREATE on schema" trigger and dbms_job call. This method was adopted to cover situations in which a developer manually added a table directly to the database rather than using the provided scripts to recreate their test environment.
I assume that the following quote from the 11gR2 documentation is mistaken, and there is no such beast as "create or replace table" in 11g:
http://download.oracle.com/docs/cd/E11882_01/server.112/e10592/statements_9003.htm#i2061306
"Dropping a table invalidates dependent objects and removes object privileges on the table. If you want to re-create the table, then you must regrant object privileges on the table, re-create the indexes, integrity constraints, and triggers for the table, and respecify its storage parameters. Truncating and replacing have none of these effects. Therefore, removing rows with the TRUNCATE statement or replacing the table with a *CREATE OR REPLACE TABLE* statement can be more efficient than dropping and re-creating a table."
Maybe you are looking for
-
Need to format month into three characters in SSRS Expression
I am using the following expression to place the month in the heading of a column. =MonthName(Month(DateAdd("M",-1,Now))) The expression above gives me the previous month, but I need to have it as "Jan", not "January". Can someone help me with an exp
-
Has Anyone Used the Pinnacle TV for Macbook Tuner?
I saw this product at the store yesterday and I'm wondering how well it works for recording TV programs and possibly movies onto my macbook. I am hoping it performs similar to a DVR, and I am also wondering if it would be possible to burn these progr
-
Standby DB creation internal error - Where do I see the detail ???
Hi all, I have Win2003 Server runnning Oracle 10.2.0.3. I have been trying to use Grid Control to create a standby database and have been running into some problems during the http transfer of the compressed data files. To get around this I decided t
-
I have Oracle 11g R2 running on Windows Server 2008 R2 In trying to load data (csv file) with SQL Loader in Enterprise Manager it tells me the job completed successfully, but there is no data in the table. The bat file is created as is the ctl and sh
-
Can't install CS5 Master collection engl Win 7 64- bits
I've downloaded the trial (no problems) and went installing. After only 3% the installation is shut down (exit code 7) with an impressive error log of 12 fatal errors, 144 errors and 135 warnings. Am running English (IE) Win7 64-bit (no additioanl la