Upgrading from 2007 to 2012 - Restoration of 2007 Storage

We are in the process of revieiwing the upgrade process. Our main concern is the ability to use DPM 2012 to restore Backups that were created on DPM 2012.
Is the restoration process supported by DPM2012.
Thank you in advance for your answer.
Will Sass
Will S. 15 Years in this thing

Hi,
As long as you are upgrading along the way, then recovery points made on DPM 2007 will be available for restore on DPM 2012.
The proper steps to upgrade from DPM 2007 to DPM 2012 are as follows:
a) Patch SCDPM 2007 to newest patch level. (kb2250436)
b) Save copy of DPM2007 SQL database (dpmbackup -db) - copy to network share.
c) Un-install DPM 2007 - then Upgrade OS Windows 2003 to Windows 2008 - then to Windows 2008 R2.
Upgrading a DPM Server to Windows Server 2008
http://technet.microsoft.com/en-us/library/dd637098.aspx
d) Install DPM2007 and install latest patch level. (kb2250436)
e) Copy saved DPM 2007 DPMDB to local drive, then restore DPM 2007 DPMDB.
(dpmsync -restoredb -dbloc c:\msdpm.bak)
(dpmsync -sync)
f) Upgrade SCDPM 2007 to DPM 2010 (Which automatcally included SQL upgrade)
g) Patch SCDPM 2010 to newest update UR7 (kb2751231)
h) Update the Agents to DPM 2010 agents
I) Upgrade SCDPM 2010 to SCDPM 2012.
j) Install latest DPM 2012 update UR3 (KB2756127)
k) update the agents to DPM 2012 agents.
L) Run CC on all data sources.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Similar Messages

Collision Detection during Upgrade from CRM 4.0 to CRM 2007

We are in the process of doing an upgrade from CRM 4.0 to CRM 2007. As part of this upgrade we are following the steps detailed in the mobile upgrade guide. we are currently working on the collision
resolution issues in the mobile area. The latest issue on the UI layer is caused by changes on tiles like docactdocu2 or capsearch2 that were reverted to standard SAP.
When solving the collisions we have been working on sub objects to these tiles. When changes to theses sub objects were finished not only the collision for the sub object was solved but no collision on the parent object was shown. But the result was that the parent objects have returned to SAP standard on vital objects like custom anchors and/or custom controllers are missing on these tiles resulting in build errors. You can easily see what happened in the version tree of these objects as no merge between the changed branch and the SAP branch took place.
Returning to the tiles version from the changed branch is not possible though this function is offered in the version tree.
Why is the collision resolution functionality not working as we would expect. Why can we not chsange the tile version to the changed branch.
Has anyone else experienced these issues
Regards
Eddie

Hi Shankar
We resolved collisions on script level like "docactdocu2onLoad" by merging or accepting the change list (SAP) version. With the collision on script level being resolved the tile the script belongs to (in this case "docactdocu2") also vanished from the collision list. The result was that the tile was reverted to the SAP version.
With the change list being released we cannot go back to the custom version of the tile except by using the version tree. But the option "Copy to Open Version" offered by a right click on the version node wanted does not work.
Any ideas
Regards
Eddie

Upgrade from Windows Server 2012 Active Directory to Windows Server 2012 R2 Active Directory

We are currently running Windows Server 2012 Active Directory and would like to upgrade to Windows Server 2012 R2 AD. Is it OK to just do an in-place upgrade, or is it advisable to build new domain controllers on R2? Are there any guides or articles anyone
can recommend?

Hi Ginandtonic,
To upgrade DC(Domain Controller) from windows server 2012 to windows server 2012 r2, please refer to these articles:
Upgrade from windows Server 2012 to 2012 R2
Upgrade Active Directory from 2012 to 2012 R2
I hope this helps.
Best Regards,
Anna

Upgrading from SBS2008 to 2012 Essentials

I'm upgrading from SBS2008 to 2012 Essentials. I understand that Essentials does not include everything that SBS did (Exchange, DC, DHCP, AD, DNS, SharePoint Companyweb, etc), so I'm guessing that I will need multiple servers. I'm trying
to figure out how to apportion and configure my overall system.
I have seen posts that indicate a recommendation to set up 2012 Standard R2 on the 1st physical server with Essentials R2 on a virtual server. And then using other virtual servers for other functions. Why would I do that? I don't understand
all the advantages and disadvantages of how to set up the various functions. Should I put Exchange server on a totally different physical machine, a server #2?
My number 1 server is a HP Proliant DL160 with dual quad core, 24GB ram and hardware RAID. What would you think would be best to install on that server and what would you put on another server?
skb

yeah...Windows Server 2012 Essentials no longer contains a built-in email service. However, it supports multiple email options that include Office 365, an on-premises server running Exchange
Server, and third-party hosted email services. If use on-premises server running Exchange Server, we do support running Exchange Server on a second server.
http://blogs.technet.com/b/sbs/archive/2012/07/26/email-options-supported-by-windows-server-2012-essentials.aspx
-->DC, DHCP, AD, DNS
you can normally transfer those roles, services and configure.
-->sharepoint
general similar steps...http://technet.microsoft.com/en-us/library/gg616007.aspx
in theory, can host Exchange server and sharepoint on one same windows server in physical machine...
Best,
Howtodo

Upgrade from CRM 5.0 to CRM 2007

Hi,
We are planning to update from CRM 5.0 to CRM 2007. We are using CRM for Leads, Opportunities and Account & Contact Management with PCUI as front end. We do have some customized iViews for Sales People and Customers. Can any one, please provide me the step-by-step process to do technical and functional upgrade or point me towards the documentation on the same
You will rewarded with the points. Thanks in advance. Please, Its URGENT...
Cheers,
Amit

Amit,
Based on your reply your work looks like the following:
1. Basis teams performs tech upgrade of your dev system
2. Security team grants temporary expanded access in dev system to access new UI and new UI tools
3. Dev/Config team takes standard delivered new UI screens and adjusts screen layouts
4. Dev/Config team adjusts any BADI's built in the previous release
The data model of CRM has not changed. If you stuck with the EEWB and used all the standard methods of enhancing the data model, you don't need to worry about data migration. However if you did not play by the SAP standards you could have more work.
As far as tracking your project you can use solution manager or build simple project tracking in MS project.
If you did no coding period, and only configuration. You should be able to complete all the configuration work in less than two weeks to get the screens as needed. However that is based on having at least one to two weeks of learning the new UI tool.
I would guess a config-only CRM implementation would only need two-three to finish all reconcilation work not including testing and training.
Take care,
Stephen

Java Enging upgrade from CRM 5.0 to CRM 2007

Hello all,
we would like to upgrade our CRM 5.0 System to 2007 (MS SQL Server 2005, Windows 2003 X64) and now we have a problem when we want to upgrade the JAVA Engine. I've got an error in Phase READ_AND_CHECK_ADMIN_PASSWORD in Java Prepare programm. A possible reason, says the system, is that the J2EE engine is not started. I must say that we have an ABAP and Java System and there are some ABAP workprocesses in the SAP management console but I cannot see any J2EE processes under "J2EE Process Table". Is that normal? I have no idea. I worked with the system perfectly, therefore I thought that this was not a problem, but now, after this upgrade error I'm not certain any longer. In which cases do we need Java processes anyway? Can/shall I uninstall the java component if we don't need it? If yes, how?
Thanks for your help.
Diana

The upgrade process is asking for a mounting point on iSeries. Removing the Windows drive letter Y: solved the issue. The correct mounting point was /BASISDVD/.......

Upgrading from SCM 4.1 to SCM 2007/5.1 (HP-UX/MaxDB)

Here's my challenge - I need to upgrade an SCM 4.1 system (HP-UX IA64 11.23/MaxDB 7.5) to SCM2007/5.1. From what I can see in the Product Availability Matrix, SCM2007/5.1 requires MaxDB 7.7. What I need to know is how and when should the MaxDB database and liveCache be upgraded from 7.5 to 7.7 (or 7.5 > 7.6 > 7.7). I've tried to run PREPARE on the first system we wanted to test the upgrade on, but it fails with the following hard error: "ERROR: MaxDB Version is not supported by this upgrade. ERROR: Error in database software path determination (ERR -10)". This leads me to believe I need to upgrade the database before upgrade upgrading the application, yet I can't seem to find this requirement documented in any of the SCM upgrade guides.
Any assistance will be appreciated.
John

Hi Kaushik
just a little input about funtional DP (not sure of system architectural improvements) :
I dont think performance would drastically improve per se
the areas that might be of some impact/ use in terms of performance are -
- parallel processing profiles
- macro improvements
- changes in Admin Workbench (BW 7 functionality might make things easier)
- changes in Planning area (no negatives for eg can help remove macros that used to do that function making it easier)
The important improvements are in more functionality
Its recommended to do some better process and layout deisgns to get performance improvements
pl note, there would be an initial long run time the first time you perform any transaction because of indexes being created

Can't queue a build after upgrading from 2008 to 2012 (TF246021)

Hi,
We're trialling an upgrade from TFS 2008 to 2012.4. New TFS has been set up on new hardware with new slq and build boxes. Then we imported 2008 backups and used TFSConfig to import / upgrade them. No errors or warnings where shown.
Unfortunately we can't queue any builds on the collection. Even a brand new definition in a new team project building "hello world". Builds in other collections work OK.
The error we're getting is
"TF246021: An error occurred while processing your request. Technical information (for administrator): SQL Server Error: 2601"
Exception Message: Cannot insert duplicate key row in object 'dbo.tbl_BuildQueue' with unique index 'PK_tbl_BuildQueue'. The duplicate key value is (2, 1). (type SqlException)
SQL Exception Class: 14
SQL Exception Number: 2601
SQL Exception Procedure: prc_iiQueueBuilds
SQL Exception Line Number: 553
SQL Exception Server: TFSSQL001\INST1
SQL Exception State: 1
SQL Error(s):
Exception Data Dictionary:
HelpLink.ProdName = Microsoft SQL Server
HelpLink.ProdVer = 10.50.4000
HelpLink.EvtSrc = MSSQLServer
HelpLink.EvtID = 2601
HelpLink.BaseHelpUrl = http://go.microsoft.com/fwlink
HelpLink.LinkId = 20476
Exception Stack Trace: at Microsoft.TeamFoundation.Framework.Server.TeamFoundationSqlResourceComponent.MapException(SqlException ex, QueryExecutionState queryState)
at Microsoft.TeamFoundation.Framework.Server.TeamFoundationSqlResourceComponent.HandleException(Exception exception)
at Microsoft.TeamFoundation.Framework.Server.TeamFoundationSqlResourceComponent.Execute(ExecuteType executeType, CommandBehavior behavior)
at Microsoft.TeamFoundation.Build.Server.DataAccess.BuildQueueComponent5.QueueBuilds(IEnumerable`1 requests, QueueOptions options)
at Microsoft.TeamFoundation.Build.Server.TeamFoundationBuildService.QueueBuilds(TeamFoundationRequestContext requestContext, IList`1 requests, QueueOptions options)
at Microsoft.TeamFoundation.Server.WebAccess.Build.ApiBuildController.QueueBuild(String definitionUri, String controllerUri, String whatToBuild, String shelveset, Nullable`1 checkin, String priority, String dropFolder, String msbuildArgs)
at lambda_method(Closure , ControllerBase , Object[] )
at System.Web.Mvc.ReflectedActionDescriptor.Execute(ControllerContext controllerContext, IDictionary`2 parameters)
at System.Web.Mvc.ControllerActionInvoker.InvokeActionMethod(ControllerContext controllerContext, ActionDescriptor actionDescriptor, IDictionary`2 parameters)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass42.<BeginInvokeSynchronousActionMethod>b__41()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)
at System.Web.Mvc.Controller.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.Controller.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.MvcHandler.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult asyncResult)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
I found a thread with similar error but it doesn't help us.
http://social.msdn.microsoft.com/Forums/en-US/ec3f9a9d-0c93-422b-bbc4-959e1e6bfe59/tf246021-an-error-occurred-while-processing-your-request-technical-information-for?forum=TFService
Any help will be much appreciated.

Hi Rad,
Thanks for your post.
Daniel provided us the helpful suggestion, please confirm that.
If install the new Build Service cannot resolve this issue, and according the error message: Cannot insert duplicate key row in object dbo.tbl_BuildQueue with nique…, it seems that this issue relate to your TFS database,
we suggest you contact a Professional Support Service at
http://support.microsoft.com/common/international.aspx?RDPATH=gp;en-us;offerprophone to gain more support on this case.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Upgrading from SQL Server 2012 Standard to SQL Server 2014 Standard Failover Cluster

Goal: To upgrade my default instance from SQL Server 2012 to SQL Server 2014 in a failover cluster.
Given:
1) Operating System Windows 2012 R2
2) 2 Virtual Machines in a cluster with SQL Server as a Guest Cluster resource. The two VMS are called APPS08 and APPS09. They are our development environment that is setup similar to our production environment.
Problem: When running the SQL Server 2014 upgrade, I started on the VM that was not running the instance. I then moved onto upgrading on the node that was running the instance. As soon as the install attempt to failover the running instance
an install error occurred that it could not failover. After many install attempts I consistently received the error
The SQL Server Failover cluster instance name 'Dev01'
already exists as a cluster resource. Opening Failover cluster manager there is no record of a DEV01.
New Strategy: Create a SQLCluster called DEV07. At the end of the Install I get 'Resource for instance 'MSSQLSERVER' should not exists. Neither I nor my Windows 2012 guy understand what Resource the install may be referring to.
We do not see anything out of the ordinary.
Any suggestions as to what Resource may be seeing the default instance would be greatly appreciated.

Hi PSCSQLDBA,
As your description, you want to upgrade the default instance in SQL Server cluster.
>> 'SQL Server failover cluster instance name 'Dev01' already exists as cluster resource'
This error could occur when there is a previously used instance name which may not be removed completely.
To work around the issue, please use one of the ways below.
1. At command prompt, type Cluster res. This command will list you all the resources including orphan resources. To delete the orphan resource, type Cluster res <resource name>/delete.
For more information about the process, please refer to the article:
http://gemanjyothisqlserver.blogspot.in/2012/12/sql-2008r22012-cluster-installation.html
2. Delete DNS entries, and force a replication of DNS to the other DNS servers.
For more information about the process, please refer to the article:
http://jon.netdork.net/2011/06/07/failed-cluster-install-and-name-already-exists/#solution
>> 'Resource for instance 'MSSQLSERVER' should not exist'
This error could occur when you already have MSSQLSERVER as a resource in the cluster, which may not be removed completely. To work around the issue, you could rebuild the SQL Server cluster node.
Regards,
Michelle Li

Upgrade from 2003 to 2012

when migrate from 2003 to 2012 server all user and ou in activedirectiry go to server 2012 or not
can upgrade from 2003 to 2008 to 2012 or not

Yes, you can add a 2012 server as a domain controller in your 2003 R2 functional level Active Directory. All AD information will replicate to the 2012 DC.
http://blogs.technet.com/b/canitpro/archive/2013/05/27/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
. : | : . : | : . tim

Upgrading from SBS 2008 and Exchange Server 2007 and Adding Modest Failover Protection

I haven't seen anyone describe this scenario, so maybe it can't be done, but it seems it should work. Can someone either confirm this is viable or set me straight and tell me it's not wise (and if not, why not).
I currently have SBS 2008 (2008 Server + Exchange Server 2007 + some other components). I use redirected folders so all my user data is stored primarily on the server, and then sync'd with their local harddrives for roaming use and as an additional
backup precaution. I want to upgrade to a modern version of Exchange (don't care too much about the underlying server OS, but seems like a good time to upgrade everything). I also want to improve the reliability for rapid recovery in the event of a system
failure. I have always felt nervous with SBS because it only runs on a single server.
My plan is:
Install Windows Server 2012 Standard on a new server machine
Join that new server to the existing SBS domain and sync the users, etc.
Install Exchange Server 2013 on the new 2012 Server
Migrate the existing Exchange data and account info to the new server
Demote the SBS Server and promote the new server to primary DC
Reformat the old SBS server and install Windows Server 2012 on it too, and join it to the domain as a second DC
Set up DFS Replication and keep all my user data folders between the two servers (so if one server fails, the other can take over, just not automatically like with a cluster)
Install Exchange Server 2013 on the reformatted 2012 Server box (so second instance on the domain) and set it up to sync with the first Exchange Server 2013 via DAG (so if either computer crashes, the other can take over for both Exchange Server and file
services)
Wouldn't that give me a complete slow-response failover system without the need for setting up a cluster (I know a cluster would provide instant failover protection, but I don't need that kind of speed - a manual switchover in the rare event of a server
failure is acceptable for us)? I could do this using cheap hardware for each server, because unless both servers fail at the same time, clients can point to the other server. And because it's not a formal cluster, I don't need to buy anything for a shared
SAN. This seems like such an obvious more cost-effective solution for a small network, I don't understand why this isn't a common approach, which makes me wonder if there is some reason it won't work.
Any suggestions or feedback? Are Redirected Folders still recommended for users on a Server 2012-based domain?
Thanks,
Colin
Colin

Ed, thanks again for your help. OK, so here's my updated plan (I realize I should probably check on some of these pieces on the Server group, instead of this Exchange group).
Constraints/objectives:
None of the machines are truly server grade hardware, but only 5 people on the network, so performance is generally not an issue, unless a given server is just pegged on CPU or HD due to its own internal maintenance tasks and can't respond to user requests.
Haven't seen any problems, since upgrading server from 4GB RAM to 8GB a few years ago.
Not going to buy any new hardware at this time, but do have several unused consumer-grade computers I can deploy as wimpy or moderate servers.
Main issue is to limit repair time in the event of a system failure (instant failover is not required, but want to be able to restore network functions within less than 24 hours in the event of a hardware failure) and minimize time spent on IT
maintenance.
Because of light IT maintenance (not anyone's primary job and we're too small to justify a dedicated IT person or to pay for outside help), almost every touch takes me research and time to re-learn what I haven't done in weeks, months, or years -- so also
want to keep all IT tasks as simple as possible.
We philosophically want to invest now for the next 5 years and avoid ongoing cloud fees (so zero interest in Windows Server Essentials with Exchange Online)
A little nervous about using VM's, just because I never have before, but I do respect that's probably the right way to do many of these things...
Currently I have SBS 2008 (Windows Server 2008 R2, Exchange Server 2007, WSUS 3, all with latest SP's, also includes SharePoint and other stuff, but I don't really care about most of it) on a single 8GB consumer grade system, which functions as a file
server and Exchange server. We use Redirected Folders and Offline files for all users, which works great for us and provides additional file redundancy (if server goes down, all of each user's files are also on their own machine and they can even continue
to work just fine w/o the server, losing only ability to send and receive e-mail). It has been sufficient, but I want to upgrade our version of Exchange and I am nervous that if that current one server fails, it would take me a long time to restore everything
from backup, easily many days, especially if I need to buy any replacement hardware. It is RAID1, so a single drive failure is easy to handle, but that's the only hardware redundancy for the current server.
New Plan:
Install Windows Server 2012 R2 Standard on a new modest machine (16GBR RAM, Core i7, 1TB RAID1 (may upgrade to 3 or 4 TB), 256 GB SSD boot drive, this had been my old personal computer)
Join that new server to the existing SBS domain (2008 R2/Exchange 2007), make it a DC, sync the users, etc.
Install Windows Server 2012 R2 Standard on a wimpy computer (4GB RAM Core i3 processor), leave it as a member server
Install Exchange Server 2013 on the wimpy new 2012 R2 Server (and nothing else, this will be dedicated to Exchange to make the most of such a wimpy machine)
Migrate the existing Exchange data from the old SBS Exchange 2007 server and account info to the new server
(or should I just create new accounts and copy the data from the user end through Outlook -- is that safer and cleaner than attempting any kind of server-level Exchange data migration?)
Demote the old SBS Server and promote the new 16GB server to primary DC. Now it's OK to take the old SBS server off the network.
Reformat the old SBS server and install Windows Server 2012 R2 on it too, and join it to the domain as a second DC (and possibly DCPROMO it to be the main server)
Install Exchange Server 2013 in a VM on the reformatted 2012 R2 Server box (so second instance on the domain for Exchange redundancy) and set it up to sync with the first Exchange Server 2013 via DAG OR set up another physical wimpy member server and install
it there. In any case, do NOT install Exchange directly on either DC.
Set up DFS Replication or a Failover Cluster (still need to research this, but I had planned on DFS, thinking Cluster required shared drive, but Ed corrected me on this) between the two DC's for redirected files and keep all my user data folders between
the two servers. We don't need automatic failover, like with a cluster, a manual switch would be acceptable, but if no additional cost or risk to clustering the two DC's, then the auto-failover protection that provides would be better than DFS.
I think this incorporates all of your points, Ed. Does this sound right now? What's your advice on #5 (how to best migrate user data)?
Thanks so much for all your help,
Colin

Error in GENSTATUS during upgrade from CRM 4.0 to CRM 2007

Dear experts
We have 12 errors in GENSTATUS after upgrading our CRM system from 4.0 to 2007. I don't know how to solve them - I had a look at SDN forum, OSS notes without success. Our system was previously connected to MSA but we want to turn it off part of this upgrade.
Below are the generation errors. I couldn't solve any of them:
CNBCCPSAP00070            CG          GNREP                  E              F              Could not find active BDoc for TRANS_ID CNBCCPSAP00070 - Identification not possible via TransID / Name
CNBCCPSAP00070            CG          LUTAB                   E              F              Could not find active BDoc for TRANS_ID CNBCCPSAP00070 - Identification not possible via TransID / Name
MSV_COUNTER               CG           GNREP                  E              F              Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
MSV_COUNTER               CG           LUTAB                   E              F              Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
0000000001CG 5ABEB7BA9F5BD3118A5F00A0C9AA8D71                PUBLI                    E              F              Database access error using table SMOG_GFUGR
F000000272CG F3CFBBF7F736D844995523584B67E937     PUBLI                    E              F              Generation error REPL_TEMPLATE_SUBCHECK
F000000273CG CDF390E3E874144F8399B0F88E37F9F2      PUBLI                    E              F              Generation error REPL_TEMPLATE_SUBCHECK
MSV_COUNTER               HT           GNREP                  E              F              Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
MSV_COUNTER               HT           LUTAB                   E              F              Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
0000000034HT B49F577F7D5BD3118A5F00A0C9AA8D71 PUBLI                    E              F              Generation error REPL_TEMPLATE_SUBCHECK_IL2
F000000273HT 42411AD9608668DAE10000000A1552B6    PUBLI                    E              F              Generation error REPL_TEMPLATE_SUBCHECK
F000000272HT 42411ADC608668DAE10000000A1552B6    PUBLI                    E              F              Generation error REPL_TEMPLATE_SUBCHECK
Thanks a lot in advance for your help
Best regards
Stephanie

Hi Stephanie
Did you find a resultion to your genstatus issue.
We are in a similar issue currently - we have the following errors
CNBCCPSAP00070            CG
CNBCCPSAP00070            CG
DOC_HEADER                CG
S000000290CG 98FBC48FBE4A0040888E14E1C27C7262
CAMPAIGN_WRITE            CG
Look forward to your response on this
Regards
Eddie

Upgrade from CRM 5.0 to CRM 2007 dublestack

Hi Group.
Running JPREPARE for the java stack we get stucked in the step where mounting points are requested ( EXTRACT_ROMS ). The JPREPARE cannot find the correct label or index.
In the step EXTRACT_ROMS the JPREPARE askes for the mount point of the following DVD Type:
CRM60_Java 'CRM 6.0 Java DVD'
DVD_KERNEL 'SAP Kernel 700'
NW_Java 'NW Java Content DVD
We copied the DVD's to our iSeries and try to extract from there in a pathes like this:
Y:\BASISDVD\SAPNW04s_SR3\CRM2007\D51033093_CRMJava
Y:\BASISDVD\SAPNW04s_SR3\CRM2007\D51033260_KRN
Y:\BASISDVD\SAPNW04s_SR3\CRM2007\D51033265_NWJava
Labels ( LABEL.ASC) are the following:
SAP:JAVA-DVD1:CRM60:SAP CRM 2007 Java DVD:*:D51033093
SAP:AKK:700:DVD_KERNEL:SAP Kernel 700:D51033260
SAP:JAVA-DVD:700SR2:content:*:D51033265
Since the step checks one by one we initially only specified the kernel DVD, since we know that it is working on iSeries side when running PREPARE for the ABAP stack.
Does anyone know what labels are expected???
We also tried to mount the DVD's in the PC running the SDTgui, without any success.
Best regards,
Teddy
ECCO Sko A/S
Edited by: Teddy L. Andersen on Jun 6, 2008 2:28 PM
The upgrade process is asking for a mounting point on iSeris. Removing the Windows drive letter Y: solved the issue. The correct mounting point was \BASISDVD\.......

The upgrade process is asking for a mounting point on iSeries. Removing the Windows drive letter Y: solved the issue. The correct mounting point was /BASISDVD/.......

JAVA Upgrade from CRM 5.0 to CRM 2007

Hi,
I need help. I'm trying to upgrade our CRM 5.0 to CMR2007 and encountered a problem during the JAVA Prepare Phase.
Here is the error I received.
The execution of ended in error.
Could not load class com.sap.sdt.j2ee.phases.PhaseTypeDetermineSystemId.
com.sap.sdt.util.misc.LoaderException: Class com.sap.sdt.j2ee.phases.PhaseTypeDetermineSystemId not found using classpath.
com.sap.sdt.ucp.pce.ctrl.PhaseLoaderException
Could not load class com.sap.sdt.j2ee.phases.PhaseTypeDetermineSystemId.
DETERMINE_SIDS
INIT
PREPARE
NetWeaver Upgrade
SAPJup
Java Upgrade
Thanks,

Hi Ramon,
In subdirectory trc you should find a file SAPJup.TRC containing some more details on the exception that happened. Add the stack if you find it there.
PhaseTypeDetermineSystemId is the first phase class to be loaded from package lib/sdt_j2ee.jar. So, you should check if this jar is around.
Regards,
Thomas

Upgrade from 2008R2 to 2012 or 2014?

Hi,
Have to start planning/testing a upgrade of SQL 2008R2 in the next month or so. I was planning on going to 2012 but I'm wondering if I should jump straight to 2014. Anyone done this all in one go, any problems/issues?
I will upgrade one instance to start with, however I will still need to backup/restore from 2008R2 to this 2012 server, mostly using RedGate SQL Backup, however there are occasions when vanilla backup/restore are used.
No replication or log shipping (as yet).
The server is a development environment for SSIS & SSRS, basically it's a BI server.
Thanks in advance.
Dave

Hello,
On SQL Server 2008 R2 you have Business Intelligence Development Studio for BI, SSIS. SQL Server 2012 and 2014 offer SQL
Server Data Tools. You won’t be able to use SSIS designers in VS 2008 to target SSIS 2012, you will have to use VS 2010 or VS2012, and if you upgrade to SQL 2014 to will have to use VS 2013.
http://blogs.msdn.com/b/analysisservices/archive/2014/04/02/sql-server-data-tools-business-intelligence-for-visual-studio-2013-ssdt-bi.aspx
Use SSIS package upgrade wizard to upgrade SSIS packages.
http://msdn.microsoft.com/en-us/library/cc280547.aspx
Since SQL Server 2012, a new project deployment model exists. Read about it on the following document.
http://msdn.microsoft.com/en-us/library/hh667275.aspx
If you choose to upgrade to SSIS 2014 instead of SSIS 2012, you will have to provide users access to integration services service using the following procedure. You do not have to do this procedure for SSIS 2012.
http://msdn.microsoft.com/en-us/library/hh213130.aspx
Please use Upgrade Advisor to detect any possible blocking points.
http://msdn.microsoft.com/en-us/library/d85b0833-ddeb-42e3-9397-97ea60d521b7(v=sql.120)
The following technical guides may be useful.
http://download.microsoft.com/download/9/5/3/9533501A-6F3E-4D03-A6A3-359AF6A79877/SQL_Server_2012_Upgrade_Technical_Reference_Guide_White_Paper.pdf
http://blogs.technet.com/b/sqlman/archive/2014/12/17/sql-server-2014-upgrade-technical-guide-now-available.aspx
Questions:
(1)
Are you planning an in-place upgrade or a side-by-side upgrade? Backup SSRS encryption keys and restore them on the new environment on a side-by-side
upgrade.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Upgrading from 2007 to 2012 - Restoration of 2007 Storage

Similar Messages

Maybe you are looking for