Upgrading from 7.5 to version 8: CEM and CCS problem with the EDMT

Hi All;
The current UCCE is 7.5 and some scripts and configuration for the CCS and CEM were already done, when I tried to upgrade for version 8 and I used the EDMT version 8 to upgrade the side_A database (logger Database), then an error message appeared which states that CCS and CEM is existed and it should be removed.
After checking, I discover that UCCE version 8 is no more supporting CCS or CEM scripts and configuration.
But, how I can resolve this problem as removing all the related configurations and all the related objects in the scripts and the scripts will be very hard and very complex ... what is the solution to overcome this problem?
I think there should be a proper method or solution from CISCO to resolve this problem.
Looking forward to hear from someone that can help me.
Regards
Bilal

Similar Messages

Upgrading from 7.5 to version 8: Web and Email Collaboration problem

Hi All;
To be able to upgrade from 7.5 to version 8.x then the web and email collaboration should be removed and this is the hard thing !
To go through all the web collaboration objects and remove it one after one is something not possible, special when I am trying to remove for example an agent who is belonging to the skill group and it gives us: you do not have a permission !!
So I decided to do a clean at the database level (specially that the problem appears when running EDMT), I need a help to know the following to be able to do this cleaning:
1) Should I do this in the side_A database or on the AWDB?
2) If I removed the Application Instance that is related to the Collaboration, could this resolve the problem to do the upgrade from version 7.5 to 8.x? Or I have to delete all the values related to the Collaboration (for example, the media class, the used skill group and the used agents, ... etc)?
Looking to a help PLZ.
Regards
Bilal

Hi All;
To be able to upgrade from 7.5 to version 8.x then the web and email collaboration should be removed and this is the hard thing !
To go through all the web collaboration objects and remove it one after one is something not possible, special when I am trying to remove for example an agent who is belonging to the skill group and it gives us: you do not have a permission !!
So I decided to do a clean at the database level (specially that the problem appears when running EDMT), I need a help to know the following to be able to do this cleaning:
1) Should I do this in the side_A database or on the AWDB?
2) If I removed the Application Instance that is related to the Collaboration, could this resolve the problem to do the upgrade from version 7.5 to 8.x? Or I have to delete all the values related to the Collaboration (for example, the media class, the used skill group and the used agents, ... etc)?
Looking to a help PLZ.
Regards
Bilal

Since i upgraded my ipad to 7.0.2 there is a problem with the photo images are

can any one help my ipad photographs are now low quality with the a serious problem with the colours, this has all happened since i upgraded to 7.0.2

Do the filenames contain special characters, like "ä,ü,..." or white space or are the vry long? Is there anything special about the image format? Try to export the edited versions in that case and reimport it with a different, shorter filename.
For testing, create a new book with only the images you want to check.
If this does not fix it, try rebuilding. Depress the option and command keys, launch iPhoto and rebuild the library.

I am trying to install the newest version of Itunes and it fails with the message "Program cannot start MSVCR80.dll is missing from your computer. Try reinstalling program to fix this program.I have tried reinstalling several times but get same results

I am trying to install the newest version of Itunes and each time I repeatedly get the message "Program cannot start MSVCR80.dll is missing from your computer Try reinstalling to fix this problem". I have tried reinstalling several times and I get the same message . Any ideas? I am most appreciative. I am using Windows 7.

Hi 49balf,
Thanks for visiting Apple Support Communities.
I recommend removing and reinstalling iTunes using these steps:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
You can find the article with these steps and more information here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best,
Jeremy

Upgrade from EDGE 3.0 -- EDGE 3.1: What to do with the new SAP transports?

Hello together,
we upgraded our EDGE 3.0 System to EDGE 3.1.
Also we upgraded the SAP integration kit.
Everything seems to work fine.
With the EDGE 3.1 Integration pack there are also new SAP transports included.
Now there are a few questions. Hope someone can help me with this
Do we have to import them?
Can we still use the "old" transports already imported in SAP?
Can we just "override" the "old" transports?
Is there an performance improvement (especially with WebI) with the new transports?
Thanks very much in advance!
With kind regards
Sebastian

Ingo,
If I do a fresh install of BOXI 3.1 Edge SP2...do I have to import the original transports or can I go directly to the SP2 "version" of the transports?
Thanks.
Kevin

I recently upgraded from 10.5 til 10.6.8 and got problems..

now I cant download pictures from my camera or from my Iphone anymore. It says "no camera found" . Tried to install the software from camera over again but it doesent help.
Any suggestions whats wrong?

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

IPAD2 since yesterday seems to have stopped allowing transfers of photos from anything other than another Apple product and comes up with the message2 itunes will no longer sync photos....which are not transferred from a Mac? Looks as if there is a prob

IPAD2 since yesterday seems to have stopped transfers of photos from non Mac equipment. I use dell with ITunes cloud facility.
Any ideas or are we to await Mac correcting the software?

Okay, can someone please give a useful answer? Thanks! I have been experiencing exactly the same problem for some time now, and it is very annoying. Furthermore, I would like to point out to Chris CA that there is absolutely nothing ambiguous about the original post.
So here is the deal. I used to be able to burn CDs with iTunes that played back fine on both my car and home stereo. After some update, and I am very sorry but I really do not remember which one, as I am just a user and not a programmer and just want something that works, which in the end Apple used to be all about, and therefore do not keep track of all the updates, CDs won't play back on my car stereo. Nothing else changed, still the same brand of CDs (even the same stack!), still the same car stereo, and still the same 2007 MBP. So by simple deduction I conclude it must be a software update. And I do not care what the exact cause is, I just want a fix!
I'd like to apologize for my tone in the above, but it is just a very annoying problem, even more so because it seems nothing is being done about it. Thanks for your answer in advance!

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

I downloaded a film from ITunes in HD and had problems, I upgraded to the latest version of ITunes and have then downloaded the film again in SD on my Windows 7 computer, but I still can't get the film to play, any idea's what to do next?

I downloaded a film from ITunes in HD and had problems, I upgraded to the latest version of ITunes and have then downloaded the film again in SD on my Windows 7 computer, but I still can't get the film to play, any idea's what to do next?
I've been working at the same problem for hours now and it's really driving me crazy so any help would be greatly appreciated.

It is working now. I no longer get the message about the item not being available in the US and I can access the store.

Lightroom: upgrade from trial to full version, how to enter license key?

I installed Lightroom from Creative Cloud (CC) trial on Windows 7 Pro, 64-bit. The version is LR 5.6. I do not want CC, so I purchased the full version of LR on DVD. I was going to reinstall LR from the DVD, but see that it is only version 5.2. I have already done a fair amount of work with the trial LR 5.6 and am worried about losing the catalog that I have created.
So I thought I could apply the full version license key to the trial install, but there is no place to do that within LR. When I bring up the CC master application it shows that I have 5 days left with LR, but still has no way to apply a license key.
I had a very long and frustrating chat session with tech support. In the end I was advised to uninstall the trial, then install the full version. I might be able to download LR 5.6 full and simply install that.
So let me summarize my questions:
Is there any way to apply the license key for standalone full version of LR to the trial version that was installed using CC?
If I uninstall trial version, will I be able to install LR 5.6 download and apply license key?
If I cannot install from download and instead have to install from purchased DVD, will version 5.2 be able to import the existing catalog? Will subsequent upgrade(s) to 5.6 go smoothly?
What about the catalog? Will the existing catalog simply be found during a new installation? Or do I have to manually import?
I've found the community help in the LR forum to be very good - and that is why I am abandoning ACDSee after many years Thank you all for your help.

You should just uninstall what you have installed for LR 5.x, now, then download and install the LR 5.6 update from the Adobe Updates page, and enter your standalone serial number, and things should pick up where you left off.
You might want to go into LR’s preferences (if LR is still opening for you) and see where the catalog (.lrcat) file actually resides on your computer in case you have a problem and have to double-click on that .lrcat file to open your catalog, but my experience is that nothing will seem different after you’ve installed the new version other than the version number will be newer. The preferences, catalog, and pictures are somewhere different than where the program is installed so uninstalling and reinstalling shouldn’t affect any of it.
LR 5.6 update is here: http://www.adobe.com/downloads/updates/
FYI, the CC-LR is licensed by logging into CC, the standalone version is licensed by entering a serial number. That is why you have to uninstall the CC_licensed version and install the non-CC-licensed version.
It also probably wouldn’t mess anything up to install LR 5.2 from the DVD, but then you’d have to turn around and immediately download the LR 5.6 update, anyway, and it would waste time, so why not start with the latest update. The update is a fully function program, not a patch to an existing program. It’ll either find your existing licensing information if you’ve already entered the serial number or ask for a serial number if it doesn’t find anything—which sounds like your situation.

I need to upgrade from my present operating version of Mac OS X version 10.6.8 to the Snoe Leopard version which I am unable to find the app for. Is this version still offered as an upgrade?

Hello,
I need to upgrade from my present operating version Mac OS X , Version 10.6.8 to the Snow Leopard. However, I am unable to locate this app. Is it still available? Any help would be greatly appreciated.
John

Prior to upgrading to Maverick, you must FIRST make sure your iMac meets all of its system requirements.

When upgrading from osx 10.7.4 to osx mountain lion I get the following Alert! This update requires OS X version 10.8.

When upgrading from osx 10.7.4 to osx mountain lion I get the following Alert! This update requires OS X version 10.8.

Sounds like you downloaded the 10.8.1 update instead of the Mountain Lion installer from the Mac App Store.
You have to purchase Mountain Lion from the App Store to get to 10.8

How do I upgrade from OS X processor version 10.5.8 to 10.6 or later. Is it worth the upgrade?

how do I upgrade from OS X processor version 10.5.8 to 10.6 or later? Is it worth the upgrade?

I have 5.8 on iMac, but it is not server version, it is a usual OS install. I would say, that the only thing there worth upgrading is adding more memory. You should also keep upgrading Firefox, OpenOffice etc. for comfortable work and avoid memory and resource-hungry or buggy applications (like Safari). I have recently used iMovie to work with video, and I never had problems with image editing there. I can compare to 6.8 on my MacBook - I cannot say there is something I missing on this iMac 5.8 which is present on 6.8.
In general, I am an old mac user, and I had experiences where OS upgrade speed up things, like going from 10.2 to 10.3, but I still recommend to make sure that you will get rid of the bugs while keeping functionality - notoriouse examples are Photoshop 7 that stopped working on new systems, Gimpshop (and underling gimp 2, though some cured it) and even some Finder features.

How do I upgrade from Mac OS X version 10.6.8 to version 10.7.4?

How do I upgrade from Mac OS X version 10.6.8 to version 10.7.4?

Choose About this Mac from the Apple menu, click on More Info, and check the model identifier against the following, which are the earliest Macs of each type that can run Mountain Lion:
iMac7,1
MacBook5,1
MacBookPro3,1
MacBookAir2,1
Macmini3,1
MacPro3,1
Xserve3,1
If your system's compatible, buy it from the Mac App Store. A computer incapable of running Mountain Lion which has a Core 2 Duo(not Core Duo) or better CPU and at least 2GB of RAM can run Lion 10.7, which is available by phoning the online Apple Store and ordering a download code for it.
(84155)

How to upgrade from trial connect 9 version with elearning features?

Please advise how i upgrade from my current trial version of Connect 9 to the full version with elearning features.
I see that the public pricing is without the elearning features, so for me this is no good as i need to host courses. The email address of [email protected] is invalid and bounces back and the phone line helpers are unable to provide information to help.
I cannot find costings or online download options anywhere
Please help as a matter of urgency
Thanks

Contact me off-forum and I'll get you all the info you need.
Jorma Jennings
jorma[at]realeyesconnect.com
Not sure why the adobe email bounces, but they probably can't get you anything more than a contact for a reseller anyhow.

Upgrading from 7.5 to version 8: CEM and CCS problem with the EDMT

Similar Messages

Maybe you are looking for