Upgrading from Edge 3.0 to edge 3.1

Hi,
If we consider upgrading from edge 3.0 to 3.1 what are the implications with the data/database?
I am aware that we would have to completely uninstall 3.0 and install 3.1 and I am fine with that concept. However, what I would like to know is:
1. can I simply point the 3.1 application to the 3.0 database and it will work?
2. what happens to the reports which already exist in our 3.0 implementation?
3. what other considerations need to be made?
Any advice would be appreciated.
Many Thanks.

Hi,
I think it should be ok, we only use it for basic presentation of Crystal Reports at present.
I will check out the documentation for the Import Wizard.
We are using a Windows environment and were hoping to take advantage of WACS although I am still not sure it is as secure as Tomcat - that will be a question for another post
Thanks,
David

Similar Messages

Upgrade from free EE to EE monthly pay (Samsung S6 edge) and it does not work

Hi, Today 28th of July, I upgraded from a free EE iphone 4S which i bought back in December 14 to a Samsung S6 edge.
Same operator. Same number. BUT I can't use it as it shows only "Emergency calls only". I also can't use my former phone as the mobile service has been disabled on it. The salesperson at carphone warehouse said that my contract would run the moment he finished my application (which was midday). SO I have paid for a service which I cannot use. I need my phone for my job.I would like to speak to someone at EE but as I don't have a phone I will have to use my work's phone which I am not allowed to do.
I feel disatisfied, very disatisfied by EE and it's not the first time. They are cheap but It seems that they do everything to disgust you from using them.
Regards,

Hi,
Carphone warehouse lied and it is not the first time if you read other peoples posts. EE are not responsible for them and they need to make the request to EE to transfer your account over I suspect to a new sim?
It can also take up to 48 hours at busy times and is obviously from the time CPW make the request.
Thanks,

Upgrade BOCD XI R2 to BO Edge 3.1

Hello,
Is it possible to upgrade the BOCD XI R2 (which was renamed to Edge in subsequent product releases) to BO Edge 3.1. The Edge 3.1 documentation only talks about upgrade from BO Edge 3.0, however does not explicitly list which upgrade paths are supported.
For BOE it is possible to upgrade from BOE XI R2 to 3.1 but there is a requirement that the XI R2 system be on SP2. There is on SP2 for BOCD XI R2 as far as I can tell.
Any clarity on this is greatly appreciated!
Kasia

I do not believe this is possible with a wizard but you probably can do it with the CCM DB copy/FRS copy, which is how the wizard did it anyway. The steps should be in SAP notes and in the 3.1 admin guide.
The general steps are install 3.1, then stop the SIA, go to properties > configuration > select DB > then point the source to the BOCD to copy the DB then copy the FRS.
Regards,
Tim

Downgrade from Enterprise 3.1 to EDGE

Do we have to make a new install if we will downgrade our installation from Enterprise 3.1 Sp03 to Edge.
Is it simply just to change the license key?
The current license applied is a temp enterprise license and system is installed at one server.

Hello,
no - you have to make a seperate install. After the install you have to transport your content from the Enterprise to the EDGE Server using the Import Wizard.
Regards
-Seb.

I just upgraded from PS cs4 to cs6. All of my files open up viewing at .0625% - which is very irrita

I just upgraded from PS cs4 to cs6. All of my files open up viewing at .0625% - which is very irritating. How can I change this?

Are you on a Mac or PC? If the former, do you have the Application Frame visible?
Could you post a screenshot of how Photoshop CS6 looks when you first open an image and have it show at the tiny size?
Chances are you've made the main Photoshop window small, which is causing it to try to fit a newly opened image in too small a space.
I'm going to make a wild guess that you're on a Mac, and have dragged the bottom edge of the Photoshop window up instead of turning off the Application Frame, so as to be able to see your desktop.
-Noel

Can I upgrade from 4.2.1 to 4.3?

Can I upgrade from 4.2.1 to 4.3 on my iPod touch?

You haven't bothered me at all. I just don't see why you are bothering to post all of this.
Can you name some other small electronics maker who does not have their products eventually not be able to be updated, or run updated software?
As things got smaller and cheaper products were left behind even faster. In the Windows world it worked a bit differently, your computer might run the latest Windows software but you had to check to see if the software you were buying was supported by the hardware you were using. Didn't have a Pentium processor?, sorry you can't use the latest version of __________.
Smartphones, tablets, etc. have just accelerated this process. I have one friend who's first smartphone purchase was a Nexus. And how many OS upgrades did he get to do on this phone? 0. Nada.
It is just a fact of electronics. The Touch version 2 just doesn't have enough RAM and graphics power to run the newer OS and apps. And this will keep happening with every smartphone as it is now the pioneer product and is easy to get caught on the bleeding edge. Welcome to the new world.
I liked it better when you built your own and could upgrade the parts in your computer to maintain some level of compatibility. But laptops came along and it was much harder to upgrade them, then you couldn't do it at all. I could at least increase the RAM in the desktops I built, I was much more limited with the laptops, and the smartphones, tablets, et. al are manufactured to such tight tolerances there is no hardware upgrade. So as software needed more RAM back in the day I just added RAM. But how do you do that in an iPad or a Touch? Or should the programmers be restricted from offering anything new?
Get used to it, it will get worse and there is no competitor you can go to in order to avoid it.

Upgrading from CS5.5 to CS6

thinking of upgrading from CS5.5 to 6
anything i should know about the difference here - i am used to building folios with 5.5 ?

There's the convenience of placing Edge files and pasting HTML.
CS6 will also package your files with Overlay Assets.
Beside that there's nothing major (unless you include alternate layouts).
If you're going to be producing Single Edition apps you may want to
check out moving to CS6 via Creative Cloud as they are included with the
price: http://www.adobe.com/products/creativecloud.html
Bob

Upgrade from BO R1 to BO R2

Hi,
We planned an upgrade from our current BO R1 to the R2 environment.
BO disapproves an upgrade directly from R1 to R2.
For this we will uninstall the R1 version on the server and install the R2 environment on it.
(Reports and groups will be earlier transferred to a test system so we can re-import them again)
Question:
Does anyone has any experience with this?
Is it possible that some files (dll or other) must be uninstalled manually?
Does BO supports this kind of upgrade?
Thx in advance for your help
JP

Hello Jean-Pierre,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Upgrade from FMS 3.5 to Flash Media Interactive Server no apps working

I sucessfully upgraded from FMS to FMIS. In the Admin it shows that the license is now Flash Media Interactive Server r405 I believe.
The live and vod services continue to work as expected.
On a separate development server I have developed a number of applications that I want to move to the new production server. Nothing connects at all on the new server. In the Admin, all the applications show as being available.
Is there something I need to do to make it work?
I don't want to post details on line but willing to share if someone can help out?
Boss really wants to make the $4000 upgrade work if you know what I mean...

Thank you. If you don't mind, I would prefer to do it here although I am
happy to post the final results for the thread. I used to work at MM
and Adobe before that so I think there is great value in one to many
support.
1. How did you upgrade - using license file or license keys - i suppose license key?
License key. Just copied and pasted into the server admin's license screen.
2. Did you restart your server after putting in the serial key? If not , please restart, for licensing changes to take place, you need to restart the server.
Yes. I did, but I did it from the admin, not the start and stop applets.
3. If you have restarted and you are facing same issue - can you check your logs and see what error messages are you getting, you can check edge.00.log,core.00.log and master.00.log.
This is from the Edge.log. I am not really sure what it says, but it
coincides with when I entered the key.
#Version: 1.0#Start-Date: 2010-08-03 07:11:16
#Software: Adobe Flash Media Server 3.5.0 r405
#Date: 2010-08-03
#Fields:
date     time     x-pid     x-status     x-ctx     x-comment2010-08-03     07:11:15     52 36     (i)2581250
Edge disconnected from core (9412).     -2010-08-03     08:51:40     5236     (i)2581252
Registering core (11384).     -2010-08-03     11:37:14     5236     (i)2581250
Edge disconnected from core (11384).     -2010-08-03     11:37:31     5236     (i)2581252
Registering core (12104).     -2010-08-03     17:06:16     5236     (i)2581250
Edge disconnected from core (12104).     -2010-08-03     17:06:16     5236     (i)2581250
Edge disconnected from core (5264).     -
#Date: 2010-08-03
#Fields:
date     time     x-pid     x-status     x-ctx     x-comment2010-08-03     17:06:38     60 80     (i)2581173
Host: C29527-121731 IPv4: 10.0.0.2     -2010-08-03     17:06:38     6080     (i)2631174
Listener started ( defaultRoot_edge1 ) :
localhost:19350/v4     -2010-08-03     17:06:39     6080     (i)2631174
Listener started ( defaultRoot_edge1 ) :
80/v4     -2010-08-03     17:06:39     6080     (i)2631174
Listener started ( defaultRoot_edge1 ) :
1935/v4     -2010-08-03     17:06:39     6080     (i)2581252
Registering core (6052).     -2010-08-03     17:06:40     6080     (i)2581252
Registering core (6120).     -
#End-Date: 2010-08-05 05:43:58
4. If I am not mistaken you have upgraded from Streaming Server to Interactive Server, am i right?
Well the name on the screen was Flash Media Server 3.5 It streams just
fine, but I get really confused with all the names of the servers frankly.
5. Also which version of FMS are you using?
3.5
Thank you so much for your help. I am trying not to have to deinstall
the server and reinstall it. If I can avoid that, please let me know.
FWIW, this is the code I used to test to see if the server was accepting
connections to an unsigned app.
package
import flash.net.NetConnection;
import flash.display.Sprite;
import flash.text.TextField;
import flash.events.NetStatusEvent;
public class FMS3Connect extends Sprite
private var nc:NetConnection;
private var rtmpNow:String;
private var msg:String;
private var connectText:TextField;
private var posX:Number;
function FMS3Connect ()
nc=new NetConnection();
nc.addEventListener (NetStatusEvent.NET_STATUS,checkConnect);
rtmpNow="rtmp://www.letsgoexpo.com/connect";
trace (rtmpNow);
//rtmpNow="rtmpe:/connect";
nc.connect (rtmpNow);
private function checkConnect (event:NetStatusEvent):void
connectText=new TextField();
msg=event.info.code;
connectText.width=250;
connectText.text=msg;
addChild (connectText);
posX=connectText.stage.stageWidth;
connectText.x=100;
connectText.y=175;
Of course it has a little SWF that goes with it, but there isn't
anything there except this.
On the development server this works and shows the connect.
Thanks for your help. I will be checking mail frequently after noon
pacific. I don't know where you are located so I guess you get mail out
whenver you can.
Matt Brown - Moss Beach Ceramics
email: [email protected]
web: www.mossbeachceramics.com
store: mossbeachceramics.etsy.com
cell: (650) 518-0250

When looking at Verizon account, I found the message "your upgrade date is aligned with term of your contact", what does that mean? I want to upgrade from an Iphone 4 to 6

I need help with upgrade questions.

My account use to say the same thing. VZW used to let us upgrade every 20 months rather than 24. This ended some time ago...so now instead of being eligible to upgrade in month 20, your upgrade date has been aligned with your 24 month contract end date. Hope this info help.
I wouldn't have been able to upgrade from my iP5 to the 6+ according to the new upgrade policy until 11/20/14. But right before iP6+ pre-order date, VZW was allowing certain customers to upgrade earlier than their contract end date as long as they moved to EDGE rather than the 2 year contract. I was going to utilize EDGE anyway so it was a bonus for me as I was able to pre-order and get my iP6+ a lot sooner than having to wait until 11/20 just to order.

Upgrading from macbook white to imac...which one?

Im looking to upgrade from my macbook white (nearly 2 and a half years old now) to a new imac.
Spec: 2.1 ghz intel core duo, 4gb ram, 120 gb hard drive, 500gb external seagate HD, 160gb external seagate HD
I am running logic 8 and use AU's such as all the native instruments ones, Rob Papen synths and Spectrasonics instruments a lot (normally running at least 10 instances of each in a project). Everything i do is software based and i am not currently running an external audio interface but i will probably get one to connect my mackies and my decks.
My macbook is now struggling to keep up with it all and regularly cuts out while playing which gets very frustrating, therefore i feel it is time to upgrade.
I dont have much money and am looking at buying the basic imac available on the apple site. Would the step up from 2.1ghz dual core to 3.06 ghz i3 processor be significant and very noticable i.e. would it stop logic cutting out while playing? or is it actually worth going for a quad core even though the i3 processor can run 4 threads at once?
Also, is it worth going all out on 8gb of ram or would it not be worth it if i wasnt running a much more powerful processor?
Any issues with the hard drive, graphics cards etc?
Obviously a new imac will have a significantly improved performance to a 2 and half year old basic macbook white but i just need to know if it is worth spending a lot more money on a more top spec imac since i cannot afford to be upgrading very often.
Matt

Even the lowest end base model iMac would be a pretty significant jump from what you have now. The amount of RAM would be the same, but the RAM in your laptop is almost certainly DDR2, while the new system would be DDR3-1333, and the Core i3 has an integrated memory controller which further reduces memory latency. Add to that hyperthreading, and I believe even Turbo Boost, it will make for a very nice step up.
What I would suggest doing, is trying things out with 4GB of RAM and see how it goes for say a month. If after some sufficient period of time, like a month or at least a couple weeks, you need more RAM, it's a lot cheaper to add it aftermarket. Any DDR3-1333 (Non-ECC) SO-DIMM should work. All you need is a Philips #2 screwdriver to remove a couple (captive) screws on the panel on the bottom edge of the system. There are 4 memory banks there you can fill. I want to think the current iMacs can take up to 32GB of RAM in a 4x8GB config.
You might want to consider scraping together just a little extra money for the i5 model however. Long term, it's going to provide better performance. Four physical cores will trump two hyperthreaded cores pretty much any day of the week. There's nothing wrong with the i3, it'll be a big improvement over what you have. However, given what you say you do with your system, the i5 is going to be a significantly better choice if you can find the money.

Access Edge or A/V edge for Skype

Dear Expert,
I received question from this customer and partner.
In TechNet told us about open port from Access Edge instead A/V edge when using Audio/Video with Skype, Is it correct? They are wondering, please help to explain.
http://technet.microsoft.com/en-us/library/jj618376.aspx
Role/Protocol/TCP or UDP/Port
Source IP address
Destination IP address
Notes
Access/SIP(MTLS)/TCP/5061
Public IM connectivity partners
Edge Server Access interface
For federated and public IM connectivity that use SIP.
Access/SIP(MTLS)/TCP/5061
Edge Server Access interface
Public IM connectivity partners
For federated and public IM connectivity that use SIP.
Access/SIP(TLS)/TCP/443
Clients
Edge Server Access interface
Client-to-server SIP traffic for external user access.
A/V/RTP/TCP/50,000-59,999
Edge Server Access interface
Live Messenger clients
Used for A/V sessions with Windows Live Messenger if public IM connectivity is configured.
A/V/STUN,MSTURN/UDP/3478
Edge Server Access interface
Live Messenger clients
Required for public IM connectivity with Windows Live Messenger.
A/V/STUN,MSTURN/UDP/3478
Live Messenger clients
Edge Server Access interface
Required for public IM connectivity with Windows Live Messenger.

I feel that that's a typo. It doesn't agree with other Lync 2013 TechNet documents such as
http://technet.microsoft.com/en-us/library/gg425891.aspxwhich specify these ports should be opened to/from the Edge Server A/V Edge service interface.
Alternatively, inbound UDP/3478 should be destined to the A/V edge. You can see in the first column, that they correctly identify the A/V role, but the typo is in the IP address that it should be sent to. Someone got excited with cut and paste.
I believe you're right to question it.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

The client connection is not allowed on the internal edge of the Access Edge Server

We are trying to setup Lync 2013 Edge Server, we have a setup as described below
Real IPs for Lync Edge/WebConf/AV
NAT of real IPs through Firewall Juniper to FE IP
Topology with NAT (Firewall IP) IP enabled
Certificates for with SAN for sip.acme.com etc (Both certs are Client Server Auth Templates from Internal MS CA)(Trusted) on Edge
Route 192.215.0.0 255.255.255.0 gateway (=firewall internal ip address)
But when external user connects and we are tracing the connection we are getting below error and lync client is
not able to connect.
TL_INFO(TF_CONNECTION) [1]0AD8.0C30::09/07/2014-08:11:13.091.0000000f
(SIPStack,SIPAdminLog::WriteConnectionEvent:SIPAdminLog.cpp(454))[4150361027] $$begin_recordSeverity: information
Text: TLS negotiation started
Local-IP: 192.215.0.xxx:5061 (Edge IP)
Peer-IP: 192.215.0.xxx:1835 (Firewall IP)
Connection-ID: 0x1100
Transport: TLS
$$end_record
TL_ERROR(TF_CONNECTION) [0]0AD8.0638::09/07/2014-08:12:45.279.0000005d (SIPStack,SIPAdminLog::WriteConnectionEvent:SIPAdminLog.cpp(389))[4150360514] $$begin_record
Severity: error
Text: The client connection is not allowed on the internal edge of the Access Edge Server
Peer-IP: 192.xxx.0.xxx:1322 (firewall ip)
Transport: TLS
Result-Code: 0xc3e93d6b SIPPROXY_E_CONNECTION_INTERNAL_FROM_CLIENT
$$end_record

Hi pshetty,
Check the following blog to deploy your Edge Server:
http://jsilverdrake.blogspot.se/2012/04/publishing-lync-with-forefront-tmg-part_25.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
You need to create persistent static routes on the internal interface to all internal networks.
Regards,
Lisa Zheng
Lisa Zheng
TechNet Community Support

I upgraded from 3gs and want to use my old 3gs as an ipod. how can i update my new apple ID on the 3gs as it still shows a previous one that I had?

I recently upgraded from 3Gs to Iphone4 and want to use my old 3Gs as an ipod. how can i update
the user ID on the 3gs to a new one that I have as it is still showing a previous user ID?

Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.

Is it really possible to upgrade from a Treo 650 to a Treo 750?

I am not a very happy customer at the moment, but any help would be greatly appreciated. I upgraded from my old Palm Tungsten to a Zire, then to a Cingular Treo 650, combining three devices into one. I have since discovered that the Treo 650 seems to have a faulty transmission mode, as I can rarely be clearly understood by whomever I call. Am on the second (or third, I have lost track) and continue to have the same problem. I get five bars of reception but can't be understood on the other end. A bit of a problem when one is trying to call 911. Am constantly told I am "breaking up". The repair shop says it "Can't duplicate the problem". OK, then I do not want to give up all the info I have stored in the fool thing, and the 750 seems to have a different system, so I thought I would try that. All the stuff I could find seemed to indicate it wouldn't be a problem to upgrade. When the 750 arrived, I tried to install the software from the CD on my Windows XP computer. No dice. Setup encounters an error and closes. Can't even look at the files, because setup tries to run any time I access the CD. From any drive. Gave it to my girlfiend to check on her computer, and the CD seemed to run fine. Other CDs work just fine on my computer. Must be some kind of conflict, but what? Tried calling the AT&T number that suggested they could help with setup, and was first connected to the business center, they routed me to the laptop center, who routed me to the network center, who said they would have to bring in the Palm customer service and connected me to a Mac guy that dumped me back to a menu that took me to someone for whom English is a second language with whom I was trying to communicate over a very poor satellite connection. They made no sense anyway. telling me first that I couldn't have two desktops running (wrong, my girlfriend has my old Zire and the CD worked fine) and then insisting that the serial number on my device had to start with a P, when it clearly does not have any alpha characters in it. Gave up on that route of assistance. Managed to get the new ActiveSync installed from my girlfriends computer over the network. Great. Now let's get my 650 synced with Outlook (which I have not used at home) and see if we can move on. Nope. First I have to update Outlook 2000 from the old Win98 to my current XP. Find the old CD, and square that away. OK, now sync to Outlook. Nope. The sync program gives an error, saying it will only sync with Outlook 98, 2000, and XP(2002). Good grief. I have Outlook 2000, and the software apparently does not recognize it. If the Palm doesn't work, there is no reason for me to keep this phone, and I am very close to returning it and abandoning the Palm entirely when I upgrade to something that works, although I dread re-entering all that information.
Post relates to: Treo 750 (AT&T)
This question was solved.
View Solution.

Thanks for the feedback. Today I installed an Enterprise version of Office 2007 I purchased a while back, but had not yet installed. Microsoft presented a few challenges, but they were quickly resolved. I then downloaded the appropriate conduit from Palm, and synced the 650 with the handheld overwriting the computer. Then used Active Destop to sync the 750. Satisfied I had moved as much info as possible, I called AT&T and had them move the phone number to the new Treo.
Bonus! When the guy at AT&T called me on the new phone to verify it, he said it sounded better than my landline.
Sorry for the streaming paragraph. When it is late I tend to write like I think.
Dave
Post relates to: Treo 750 (AT&T)

Upgrading from Edge 3.0 to edge 3.1

Similar Messages

Maybe you are looking for