Upgrading from HDD to SSD

I received a HP 2000 2b43dx laptop as a gift. I increased the ram from 4GB to 8GB but that did not help the performance very much. I realize that the performance is limited mostly by the cpu which is AMD E-300 running at 1.3 MHZ. I don't think it is possible to easily upgrade the cpu so I would like to replace the 320GB 5400 rpm HDD with a Samsung 840 EVO 250GB SSD. It looks like Samsung data migration software should work ok for cloning the existing HDD (except it does not carry over the OEM recovery partition). I made a USB copy of the recovery partition and since I have recently upgraded from Win 8 to 8.1 I hope I never have to go back to square 1 with the recovery partition.
First limitation for the upgrade is that I have SATA II instead of SATA III but that is not supposed to be a major limitation. Second limitation is that apparently HP consumer laptops such as mine have a locked BIOS so it is not possible to activate AHCI through the BIOS. Also device manager only displays AMD SATA controller and no AHCI SATA controller. I was hoping that this would not be a major problem because supposedly the Samsung Magician SSD management software allows to you to manually manage the SSD performance. BUT when I read the user manual for Samsung Magician:
(http://downloadcenter.samsung.com/content/SW/201401/20140128164030078/Magician_English_Installation_...
The Magician manual (page 5) states that it does not work with AMD chipsets with AMD drivers which my model has. This is a major limiting factor because use of the magician software is critical for making sure the SSD is working correctly. Is it possible to switch from AMD drivers to Microsoft or Nvidia drivers so I can use the Samsung Magician software? Any references to sources and methods would be appreciated.
This question was solved.
View Solution.

Don't overthink it. The BIOS is set to ahci by default and invisibly. Windows 8 and 8.1 manage SSDs natively so there is nothing you really need to do. Clone the old drive to the new and go. The only thing to be careful about when you are cloing is not to shrink the sytem reserved partitions. If you do that things like Windows Backup, which use the system reserved partition, will no longer function and if the system partitions are shrunk too much the system will fail to boot. That can be repaired with a repair disk but it is a pain you want to avoid. So use a manual clone option and keep all but the main C:\ partition the same size.
If this is "the Answer" please click "Accept as Solution" to help others find it.

Similar Messages

How to upgrade from HDD to SSD in Mid 2010 13inch MacbookPro?

I am upgrading from HDD to SSD and would like the step by step direction of how to do it on my 13inch MacBookPro mid 2010. Also, I would like to do a clean install of the OS onto the new SSD, and simply transfer my data(i.e. documents, pictures) from the old HDD to the new SSD(Samsung 500GB)
Any detailed directions would be appreciated. You may send responses directly to my address: ******* Thanks in advance
<Edited by Host>

Tolefe1 wrote:
Thanks. How do I booth to IR? Won't I need to connect to the internet to be able to booth to Internet Recovery... Please give steps as I am pretty new to this.
Turn the Mac on (or reboot it) and press command-option-R as soon as you hear the startup chime. Hold the keys down until you see a globe, then release. When the Recovery Menu appears you choose Disk Utility and format the SSD for use in a Mac (Erase>Set Format to MacOS Extended (Journaled), then exit Disk Utility and choose Install OSX
You will need to be connected to the Internet and your Mac should detect your network and ask for a password automatically when Recovery Starts.

How to upgrade from HDD to SSD

Hi All,
I am thinking of upgrading my HDD to a SSD, but I dont know how exactly to transfer OS, settings, my own files etc. onto new SSD?
Can someone please brake the whole process into simple step-by-step guide?
Thanks in advance,
Max

Not really - but here is a user tip on using Carbon Copy Cloner to clone your old drive to your new SSD.
All you really need to do is buy a $20 or so enclosure - I'd recommend OWC - for one of the drives and then clone your existing hard drive to your new SSD, after you format the SSD as "Mac OS Extended (Journaled)" with a single GUID partition.
You can go either way - install the SSD first and then boot from your old drive in the enclosure, use Disk Utility to format the SSD and then use CCC to clone your data from the old drive to the new. Or put the SSD into the enclosure first (I like the first way better).
Oh, and there are 100's of videos on YouTube (just make sure that you search for your specific model MBP).
Clinton

Q190 from HDD to SSD?

Hi,
Can I upgrade my Q190 (57312246) from HDD to SSD?
I am looking to purchase the following SSD: http://www.amazon.com/Samsung-MZ-7TD250BW-Series-Solid-2-5-Inch/dp/B009NHAEXE/
Thanks
Solved!
Go to Solution.

hi filippo,
Yes you can use that SSD Samsung MZ-7TD250BW 840 Series Solid State Drive (SSD) 250 GB Sata 2.5-Inch as the Q190 uses a standard SATA 3.0Gb/s, 2.5" wide HDD as per this pdf data sheet.
You may also want to check Crucial's SSD Upgrade for the Ideacentre Q190.
Best regards,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Going from HDD to SSD+HDD

I have a 2010 First Gen i7 desktop iMac computer and am looking rather fondly at SSD drives to run alongside my 1TB Internal HDD. Boot and Apps on SSD, everything else on Internal, the usual set-up.
I know I can change the location of my home folder via System Prefs > Users & Groups > Ctrl+Click User > Advanced Options
What would be the best way to deal with the migration from HDD to SSD+HDD?
Do I do a fresh install onto the SSD and then point to the home folder left over on the HDD and delete the old system files around it?
Does restoring from Time Machine via the Lion install process give me the option of choosing a different disk to send my personal files to? (this would be proffered).
Do I wipe everything clean, restore the OS from time machine, then use Time Machine from the temperary user account to restore my personal files to the HDD?
I do have two external HDDs (time machine and "junk" drive) - do I use the terminal to copy my files to the junk drive (preserving structure and timestamps using the -pR flag), then copy them back onto the HDD once everything is wiped and continue from there?
The last options seems like the most realistic, but the second would be the most proffered (if possible).
What is the best way to do this? Anyone done it before? Anything I should be careful of?
Thanks!

A clone of a HDD will have loads of empty blocks, all those blocks would be written to the SSD...
Incorrect. Most backup programs don't do a block-for-block copy (though some have such an option on very restricted conditions). They copy the files (like cp -rp). So blank space on the source won't be the same blank space on the destination.
But serious question for a moment, do these Carbon Copy Clone drive 3rd party softwares have some kind of special function? Some people have crazy devotion to them and its peaked my interest as to why.
If you want to go through the "exercise" of creating lauchagents or cron tasks for constructing and easily changing scheduling backups, more power to you. I for one just want to schedule the stuff, possibly change the schedule if need be, and move on to more important things like doing the work that actually needs to be backed up! If you don't believe in scheduling periodic backups, well, that's another story.
Though, to be honest, I still question its usefulness when Disk utility does the same thing; select a hard disk ( "TOSHIBA MK2561GSYN Media" on my MacBook Pro), click "new image" and then click go. Then use restore in Disk Ulitity to restore the disk from the image - carbon copy goodness!
So do most other people that do backups, i.e., creating a .dmg (what you get from DU's New Image) is not the way to do backups. DU's Restore, maybe, but I've never used DU for backups.

I have a hdd from late 2009 that I upgraded from leopard to snow leopard to lion to mountain lion. I want to upgrade the hdd to ssd. Do I need to buy a new copy of mountain lion to install on the ssd? If not, then what is the procedure to transfer?

I have a hdd from a late 2009 mbp. I upgraded from leopard to snow leopard to lion to mountain lion. Now I want to upgrade to a ssd. Do I need to purchase a new copy of mountain lion to go on my new ssd? If I don't, then what is the procedure to transfer mountain lion with my 4 user accounts onto the new ssd from the hdd?
I'm confused on if I can use the recovery hd on a thumb drive to install mountain lion on my ssd. Will it be pheasible with so many OS X upgrades? And then how do I get my user accounts onto the ssd from the hdd. Do I use migration assistant? Do I need to make a time machine backup first? Should I use something called Carbon Clone or something like that?
Thanks for reading

If you have a cable that connects and external HDD to the MBP, it will do. If it is something like this, an enclosure will not be needed for the swap:
An enclosure allows you to use your old HDD for storage or backup purposes. The cable will not.
Here are instructions as to how the swap can be performed using DISK UTITY. Substitute You cable for the enclosure in same:
INSTALLING A NEW HDD IN A MBP
1. Make certain that you have backed up all of your important data.
2. You will need a HDD enclosure. One with a USB connection will do. A 9 pin Firewire is better.
3. Install your new drive in the enclosure and connect it to your MBP.
4. Open DISK UTILITY>ERASE. From the left hand column drag the new drive into the 'Name' field. Make sure that the format is 'Mac OS Extended (Journaled)'. Click on the 'Erase' button.
5. Click on the 'Restore' button (on top). Drag the old drive into the 'Source' field and the new drive into the 'Destination' field. Click on the 'Restore' button on the bottom right hand corner.
Depending upon the amount of data you are transferring, this may take a couple hours or more. A Firewire will speed up the transfer. This will result in both drives having identical information on them.
6. After the data transfer has completed, you may swap the drives. Start the MBP and you have finished the installation. The initial boot may take a bit longer than you are accustomed to, but that is normal.
7. When you are satisfied that the new hard drive if functioning properly, you can erase the old drive and use it for any needs that you may have.
If there is any confusion on your part, post back.
Ciao.

T430s upgrading from HDD with 16G mSATA SSD to primary SSD - what to do with mSATA SSD

Hi all,
I am going to install a Samsung 840 pro 256G SSD to replace my HDD that came with my T430s. It also came with a 16G mSATA SSD "cache" drive. Once I install the primary 256G SSD, I think the mSATA SSD will be useless and only going to cause trouble.
My question is, can I just remove it at the same time as I swap the HDD and SSD or will that cause problems? Are there proper steps to follow in this situation? Will any info be lost if I just take it out?.....I figure not since it is just a "cache" drive which is not supposed to really store any files.
thanks,
Dan
btw - my overall impression is that this mSATA "cache" thing has been basically useless and a waste of money.
Solved!
Go to Solution.

My 16GB SanDisk U100 is giving a SMART error as noted by a variety of tools (Crystal Disk, SanDisk SSD Toolkit, Lenovo's boot diagnostics), and is failing and useless. I was thinking of replacing, but I have a couple of questions:
Will ExpressCache work just as effectively if I get a 32GB mSATA and partition out 16GB for caching and the rest of data?
Are bus transfer speeds any different if on mSATA vs. internal HD port? Meaning is internal HD on a faster bus configuration than mSATA?
I also wonder by OP thought ExpressCache was useless. I also like the idea of getting a large mSATA such as lead_org mentions, but I wonder if it is more cost effective to just get a single 1TB internal HD with hybrid SSD technology...

How to upgrade Sata Hdd to SSD on Mac Book Pro 13"?

I have a Mac book Pro 13" and I want to upgrade my Harddrive to SSD. Also want to know how to do cloning, so that no data loss will be there.
Regards
Sid J

what you do is first put the the SSD in an external enclosure and hook it up to your mac. Then, open disc utility in your utilities folder. Erase the new SSD and reformat it as Mac OS Extended (Journaled). Then, run the cloning program and it will make a mirror image of the HDD currently inside your mac to the new SSD in the external enclosure. Then, remove the SSD from the external enclosure and put in it your mac. All done! . If you are unfamiliar with an external enclosure, they are very inexpensive..here is one I own: http://www.newegg.com/Product/Product.aspx?Item=N82E16817106115. Any further questions you my have either now or during the process, don't hesitate to ask, I have done this process a handful of times and it is very easy even for the non-techie.

From hdd to ssd: what about os and all data?

Hello everybody.
I know there are a lot of discussion about it and i read lots of them,
But maybe because english is not my first language, i have some problems in understanding the right things to do.
Also, i am pretty new with mac world as i just have my mb pro since last november.
so i hope you can help me with easy words, thanks.
here's the list of what i have:
- MacBook Pro 2.5ghz, 4gb ram, 500gb hdd
- os x mavericks (installed 2 days ago)
- all my documents/photos/music in my MB Pro
... and:
- crucial ssd 480gb
- an external hd enclosure usb 3.0
- the 17 in 1 tool kit
What do i have to do first?
And how will i transfer/install the os x from hd to ssd? or it "remains" somewhiere in my MB Pro?
I know there is a link from crucial with the procedure for removing hd and installing ssd, is this all i have to do?
Really hope you can help me... thanks in advance!
F.

Follow these steps:
Make certain that you have your data backed up as a precaution.
Attach the SSD to the MBP and open Disk Utility>Erase. Format the SSD to Mac OS Extended (Journaled).
Open Disk Utility>Restore and in the 'Source' field drag the internal HDD from the left hand column.
In the 'Destination' field, drag the SSD from the left hand column.
Click on the 'Restore' button.
Depending upon the amount of data, this process may take a couple of hours.
When finished, restart your MBP holding doen the OPTION key. The display should show the internal HDD and the external SSD (yellow in color). Click on the SSD and if it boots the MBP, the clone has been successful.
Perform the physical swap. Your MBP should be ready to go. All of your data will be on the SSD exactly as it was on the HDD.
Ciao.
Message was edited by: OGELTHORPE

Going from hdd to ssd

I would like to change a hdd to ssd on macbook pro (mid 2010). If I use time machine backup from old system on new ssd will it be copied with the old disk faults ? I would like to install fresh OS X on ssd, but at the same time I wish to keep aperture librery with all my pictures and iweb where I created my website.
This are my priorities and the rest of data I can move to external hard drive and bring them one by one to new system on new ssd.
Could you please, tell me how to do it and what is best solution ?

A clone of a HDD will have loads of empty blocks, all those blocks would be written to the SSD...
Incorrect. Most backup programs don't do a block-for-block copy (though some have such an option on very restricted conditions). They copy the files (like cp -rp). So blank space on the source won't be the same blank space on the destination.
But serious question for a moment, do these Carbon Copy Clone drive 3rd party softwares have some kind of special function? Some people have crazy devotion to them and its peaked my interest as to why.
If you want to go through the "exercise" of creating lauchagents or cron tasks for constructing and easily changing scheduling backups, more power to you. I for one just want to schedule the stuff, possibly change the schedule if need be, and move on to more important things like doing the work that actually needs to be backed up! If you don't believe in scheduling periodic backups, well, that's another story.
Though, to be honest, I still question its usefulness when Disk utility does the same thing; select a hard disk ( "TOSHIBA MK2561GSYN Media" on my MacBook Pro), click "new image" and then click go. Then use restore in Disk Ulitity to restore the disk from the image - carbon copy goodness!
So do most other people that do backups, i.e., creating a .dmg (what you get from DU's New Image) is not the way to do backups. DU's Restore, maybe, but I've never used DU for backups.

Early 2008 mac pro won't boot from hdd when ssd is installed

I have Mountain Lion 10.8.3 installed on my 1TB HDD in my early 2008 mac pro. That is the only OS install on my mac. I have an OWC SSD formatted but left as an empty drive that I am trying to use but when it's installed my mac hangs on the blank gray screen.
My mac cold boots fine and runs fine when the SSD is *not* installed. When I shut down and put the SSD into a drive bay the mac does seem to boot ok the first time, but when the computer is off for a while it will not boot. It just hangs on the blank gray screen (no apple logo). As soon as I pull out the SSD, the computer boots fine and runs fine again. I am not trying to boot off the SSD, I am booting off the HDD. The correct drive (1tb hdd) is selected in startup disk.
OWC has been helping me and I have tested 3 SSD's. So it does not appear to be a problem with their drive.
The mac will boot into safe mode with the SSD installed. It will boot if I choose the boot drive with the option key at startup.
Mountain Lion was clean installed.
Could it be some sort of library pref or cache issue?
Any recommendations on what to try?

A HT does not find a lot of errors.
It doesn't look for bad sectors or directory or file problems.
Clone your SSD now that you have a clean OS and has the Apple updates on it. Before you make changes.
Install TRIM Enabler 2.2+ on it and any boot volume, to enable TRIM and so that Disk Utility's Repair Disk will trim cells. Mountain Lion Recovery won't which is a shame, so...
Clone and keep bootable backup clone of your system to use for maintenance.
A really bad directory on a system drive will cause interference from booting.
SSDs really need extra care, and even with TRIM, to be repaired from time to time and couple times a year, to do an erase and restore from a current image.
Of course Mac OS system even iwth apps is small and doesn't need to have any data or media and fits on 120GB usually just fine and still have a good enough amount free so TRIM and Garbage Collection can work properly and not get low on free pages. But 20GB free should be the minimum free, and better to have more, at least whatever total amount is written out in a month.

Moving Windows 8.1 from HDD to SSD

Hi! I want to know the best way to move Windows 8.1 from current HDD to SSD. Thanks!
System Information
Model: MSI GT72 2QE DOMINATOR PRO GT722QE-638NL
Product Name: GT72 2QE
OS: Microsoft Windows 8.1 64-bit
Windows Product Key:
HDI Build: ZS7-1781BM4-DS0 3.3.A15.8.0.1
BIOS Version: E1781IMS.10H
BIOS Release Date: 2014/11/21
EC Version: 1781EMS1 Ver5.08, 11/04/2014
CPU: Intel(R) Core(TM) i7-4720HQ CPU @ 2.60GHz
Memory: 16 GB @ 666 MHz
- 8192 MB, DDR3-1600, Kingston MSI16D3LS1MNG/8G
- 4096 MB, DDR3-1333, Samsung M471B5273DH0-CH9
- 4096 MB, DDR3-1333, Samsung M471B5273DH0-CH9
Graphics: NVIDIA GeForce GTX 980M, 4095 MB
VBIOS Version: 84.04.22.00.0c
Drive: HDD, HGST HTS721010A9E630, 931,51 GB
Drive: SSD, ADATA SP900NS38, 238,47 GB
Network: Killer Wireless-n/a/ac 1525 Wireless Network Adapter
Network: Killer e2200 Gigabit Ethernet Controller (NDIS 6.30)
OS Activation
Name: Windows(R), Core edition
Description: Windows(R) Operating System, OEM_DM channel
Partial Product Key:
License Status: Licensed

Thank you all for answers. I found a solution:
Tools: 1) Aomei Partition Assistant Pro Edition
2) Paragon Migrate OS to SSD 4.0 ™
First i convert my new SSD MBR to GPT with AOMEI Partition Assistant. After this used Paragon Migrate OS to SSD™ 4.0. Very easy. Time ellapsed ca 30 minutes.
w w w.paragon-software.com/technologies/components/migrate-OS-to-SSD/
w w w.download.paragon-software.com/doc/MigrateOStoSSD_4_manual_eng.pdf
w w w.tomshardware.co.uk/forum/id-1670056/successful-clone-windows-hard-drive-ssd-gpt-uefi.html

Upgraded to 10, How to move from HDD to SSD? (Y-Series Laptop)

Howdy all, I have a Lenovo Y Series Laptop that came with a combo HDD/SSD. I assumed that Windows would be installed on the SSD, leaving the HDD for everything else. Turns out this isn't the case. The SSD is currently at 22.6g free of 24.9, and I'm honestly not sure if it's a totally separate drive, or if it's integrated into the HDD somehow.. I am trying to figure out how to move windows onto the SSD potion of the hard drive, but just want to make sure I'm not forgetting something. I assume I'll have to:Backup any files I want to keep (there are none, just applications I can get again after)Make a Windows 10 Boot Drive on a USBReformat SSDBoot from the USBPerform clean install of Windows 10 on SSD(possible step here of backing up lenovo software?)Reformat HDDRe-install all apps + programsAre there any Particular things that I need to make sure of for Windows 10?Am I forgetting anything?Is this a terrible idea?Is this totally not how my particular hard drive works?Is there a waaaay easier way to do this without possibly destroying everything? Lastly I want to make sure that the Lenovo software stays on the laptop, I assume it'll all go bye-bye if I do a clean install. I tried this once years ago and ended up making the Fn keys stop working, the fan and temperature control goofy, and I think it may even have been haunted.. Any advice or known disastrous things to avoid would be super helpful.

hi Trosh,
Welcome to the Forums.
Using the parts lookup page to check the hard drive specs on models 80FA002CUS and 80FA002DUS, those machines are configured with an SSHD (1TB HDD with a built-in 8GB SSD cache).
The 22.6 GB free of 24.9 GB that you're seing is likely the D:\ drive, which is a partition of the 1TB HDD (you can verify this by opening up Disk Management)
As for upgrading to Windows 10:
1. Ensure that you have a backup copy of your files before upgrading and create a recovery drive just in case.
2. Before you can clean install Windows 10, you will need to upgrade your current installation (e.g., Windows 8.1) first to Windows 10 and activate. Once this is done, you can proceed in doing a clean install. If you proceed in doing a clean install on first attempt, you may not be able to activate Windows.
You can read more in this article:
How to Activate and resolve common Product key issues in Windows 10
Note that doing a clean install will definitely remove all preloaded apps and drivers, thus, you will need to reinstall them back (some proprietary preloaded apps though doesn't have an Installer due to license limitation)
3. After upgrading Windows 8.1 to Windows 10, some preloaded apps and drivers may have limited functionality or may not work at all. Thus, you will need to update to the latest Windows 10 drivers (if available).
More info here:
https://support.lenovo.com/us/en/documents/ht103611
4. In case you get issues with the upgrade, you can always refresh Windows 10 or go back to the previous Windows build or by doing a system recovery then re-upgrade.
- Refresh Windows 10
- Windows 10 - Go Back to Previous Win1dows
- Link to picture (select System Recovery)
5. If you're leaning towards an SSD upgrade (e.g., 256GB or 500GB), you will need to migrate the OS from the SSHD to the SSD and upgrade to Windows 10. If you have already originally upgraded though on the stock drive, you can clean install Windows on the new SSD.
More info before upgrading to Windows 10:
Windows 10 - Upgrade Installation
Hope the info above answers your questions.
Regards

How to transfer data from HDD to SSD?

Hi everyone,
I'm planning to upgrade my Mac Book Pro (13-Inch, Late 2011) by switching the default HDD with a new SDD. I've been told that with my generation of MBPs, I can remove the optical drive and replace it with a SSD and have two drives in stead of just one. Someone even told me that I can put the current HDD in a caddy where the optical drive is, and put the new SSD in the current HDD slot.
I would like to know which SSD would be the most suitable for my computer, I was looking to have a 512MB storage SSD, but I don't know which brand is the best.
I would also like to know, how to transfer all the storage from my current HDD to the new SSD, because I'd want to use the new SSD as the default one. I have an Apple AirPort Time Capsule for my Time Machine back ups. Is it possible to restore an old backup from the current HDD to the new SSD using Migration Assistant?
I would really appreciate the help. Thank you!

You may want to contact OWC -- they have a good reputation in the Mac world and an 800 number or online chat options to answer your questions. https://www.macsales.com
They also have installation videos and other support at http://eshop.macsales.com/tech_center/

Transfer of Windows 7 from HDD to SSD on same computer!?

Hi,
Ordered a new Solid State Drive for my computer so it will boot faster when i install my OS onto it. I have Windows 7 currently installed onto my HDD. Problem is how do i get my OS (Windows 7) from my Hard drive to my SSD?
Have important files on my HDD so a formatt is not an option.

Im hoping setting the PC to boot from the SSD will cause it to ignore the old OS still on my HDD but still alow me to browse the files left on there?
If the BIOS is set to boot from the SSD first then it will not boot from the HDD, but you will still have access to it.
If you have permissions issues with files:
How to Grant Permissions in Windows 7
1. Locate the file or folder in which you want to take ownership in Windows Explorer.
2. Right click on file or folder and select Properties from the Menu
3. Click on the Security tab, then click the Edit button. Click OK to confirm UAC elevation request if needed.
4. Select user/group from permission window or click add to add other user or group (you may need to do this for multiple users - ex: administrator and your own user account).
5. Now under the Permission section check the rights which you want for the user i.e check "Full Control" under the "Allow" column to assign full access rights control permissions to the user.
6. Click OK for changes to take effect, and click OK again to exit from the Properties window.
ADDED:
Will the old deactivated OS on the HDD cause any problems?
If you only have one install of Windows using your product key you should not have problems. After transferring files your need to format/delete the old install of Windows 7.
You might have to use phone activation.
Activate Windows 7 on this computer
http://windows.microsoft.com/en-US/windows7/activate-windows-7-on-this-computer

Upgrading from HDD to SSD

Similar Messages

Maybe you are looking for