Upgrading from Office 2010 to 365

Upgrading from Office 2010 Pro to 365 Pro Plus - I know you must uninstall 2010 and install 365 or can run them concurrently. Question is - if you uninstall 2010 and install 365, what settings are lost and what settings are retained? Outlook signatures?  Word
and Excel settings and preferences? 
Also must the OST files be re-downloaded again?  I hear there's a 40% compression improvement so this might be ideal, just want to know if the GPO to not re-download the OSTs actually works in this scenario?

Hi,
Uninstall Office 2010 will not remove any user settings, the user settings will migrate upon the first use of each Office 2013 application.
By default, when Outlook 2013 is installed, a new compressed version of the Outlook data file (.ost) is created. This new compressed version of the .ost is up to 40% smaller than the size of the .ost files that were created in earlier versions of Outlook.
So it is recommended to use the new .ost file.
The "Do not create new OST file on upgrade" policy also works for Outlook 2013, however you might need to download the new Outlook Group Policy template (Outlk15.admx). Outlook 2010 template should not work in this scenario.
Regards,
A.B.

Similar Messages

  • Can I sync my iCloud calendar with Outlook 365?  I upgraded from Office 2010 and now it doesn't sync.

    I upgraded from Outlook 2010, and now it doesn't update in Outlook 365.  Thinking I can't do it, and it's a pity, cause I want it all to integrate on phone and on desktop.  I'm running Windows 7 and Office 365.  The iCloud app works fine with Internet Explorer, but I can't get the calendar to update.  Any suggestions?

    Can't I just set up Exchange as one of my calendars in ical?
    Only if you're running Snow Leopard and your employer will allow access (different than iPhone/mobile device access, so most likely not), but not needed - keep reading.
    Is it really true that I have to choose between syncing Exchange with work server OR syncing iCal with personal Macbook?
    No. It was true, but with the v3.0 software that changed - you can now sync your Exchange contacts and calendar over the air, and your Address Book and iCal via iTunes over the docking cable.
    What is the best work around for this?
    None needed. When you set up the exchange account, and choose to turn on syncing of contacts and calendars, you will be prompted to remove all other data, or keep it on the iPhone. Choose the keep option. Note that in that case, your personal data will not be uploaded to the Exchange server - the iPhone keeps them separate (although you can choose to view them in a merged fashion).
    I have this set up on my phone (Exchange calendar along side personal and other calendars from iCal). Same for contacts. Works great.

  • Synch problems after upgrade from Office 2010 Beta

    I updated from the beta version of Office 2010 to the pro version. Now I can not synch my calendar. I get the message "no supported calendar application can be found" on the info page of my device in Itunes (seems it can not find Outlook 2010), even though it did find my contacts in Outlook and continues to synch those without a problem. it appears others have had some version of this problem. I followed the steps outlined to delete all the itunes and related programs in a specific order and then reinstall, no joy. any body have a clue what I should chase next?

    Hi Daniel,
    What OAT tool are you using? Is it the Office Customization Tool?
    Where did you get the "Do not create new ost file during Migration" option in the tool? As far as I know, OST file cannot be migrated. If you were able to use the old OST file, Outlook will prompt that it
    doesn't match the server mailbox.
    The ForceOSTPath applies only to new profile, it can't be used to force Outlook to use the old OST file.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • On Upgrade (from Office 2010) don't create new .ost file

    Hi there, hope someone can help me.
    Here is my Problem:
    I'm runninng Office 2010 (32Bit Version) on Windows 7 Enterprise x64. I've started Office 2010 with Exchange CacheMode activated. The ost-file is located under D:\Data\outlook\%username%
    Now I'm testing Migration to Outlook 2013.
    I'm using OAT to do the following things (regarding only Outlook):
    - Uninstall of Office 2010
    - Install of Office 2013 with using old settings
    -Features:  Configuring "Do not create new ost file during Migration" (we have many subsidiaries with low performance connections - so the old ost should be used after migration)
    Outlook-Profile: Tried all 3 methods (use existing profile | change profile | new Profile)
    At all my tests Outlook creates a new .ost-file under standard directory and don't use  the existing ost-file under D:\Data\%Username%
    After These tests i tried it with gpo "donotcreatenewostonupgrade" - But in this case also a new ost is created.
    In all cases i have 2 Outlook profiles: "Outlook" (with new ost) and "Backup of Outlook" (with old ost)
    By Setting ForceOSTPath to D:\Data\outlook\%username"
    and Donotcreatnewostonupgrade to 1
    i get two .ost's under D:\Data\outlook\%username" - "outlook.ost" and "Outlook data file.ost"and two mailprofiles "BACKUP OF Outlook" and "Outlook"
    So ForceOSTPath is getting used, but Donotcreatnewostonupgrade not *confusing*
    Can someone cann tell me a solution for this problem?
    Best regards
    Daniel
    Best regards
    Daniel

    Hi Daniel,
    What OAT tool are you using? Is it the Office Customization Tool?
    Where did you get the "Do not create new ost file during Migration" option in the tool? As far as I know, OST file cannot be migrated. If you were able to use the old OST file, Outlook will prompt that it
    doesn't match the server mailbox.
    The ForceOSTPath applies only to new profile, it can't be used to force Outlook to use the old OST file.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Office 2013 Upgrade - Retain Recently Opened Documents/WorkBooks from Office 2010

    Hello,
    In our Windows 7 environment, we are planning to upgrade our users from Office Professional Plus 2010 to Office Professional Plus 2013 via SCCM 2012 R2. One of the user requirements is that we are to retain their recently opened files/documents
    so that the history will still be shown even after they have upgraded over to Office 2013.
    From what I have researched, it may be possible to do this if we copy some of the user's registry keys from Office 2010 and export them to the Office 2013. However, I have not tried it and wanted to see what thoughts you guys may have on this.
    Has anyone run into this situation? Any advice on this? Thanks.

    Hi Jimmy,
    Did you get any error message when you try to open an Excel file/Word document?
    If so, you can post the error message and  event log here.Also ,if you had antivirus software installed, try to disable them to test this issue.
    In addition, what happens if you add the network server location as a trusted location?
    Wind Zhang
    TechNet Community Support

  • Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013

    Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013 
    Newform.aspx of list:-
    Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?

    Hello dcakumar,
    Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
    - Dennis | Netherlands | Blog |
    Twitter

  • Access is Denied -- Site Upgrade Upgrade from Foundation 2010 to Foundation 2013

    I'm trying to do a Site Upgrade from Foundation 2010 to 2013 and I keep getting Access Denied during the site upgrade process
    This is the error I keep seeing:
    Inner Exception: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
    Here is the log file.
    "02/28/2014 10:23:02.36 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPWebWssSequence ajyxw DEBUG [Navision] NeedsUpgrade = true, SchemaVersion = 4.0.25.0, TargetSchemaVersion = 15.0.30.0. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:02.36 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPUpgradeSiteSession ajxmv DEBUG NeedsUpgrade [Navision] true because of upgrader [Microsoft.SharePoint.Upgrade.SPWebWssSequence] 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:02.36 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPUpgradeSiteSession ajxmx DEBUG NeedsUpgrade [Navision] returned: True. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:02.36 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPUpgradeSiteSession ajxn3 DEBUG Disposing Navision. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:02.36 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPUpgradeSiteSession ajxni DEBUG Upgrading [Navision]. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:02.36 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPWebWssSequence ajywv DEBUG Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:02.36 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPWebWssSequence2 ajy8z DEBUG Begin upgrade of SPWeb scoped features. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:02.37 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPXmlConfiguration ajy1p DEBUG Template upgrade: Skipped upgrade WebTemplate XML for template 'STS#0' at: 'C:\Program Files\Common Files\Microsoft
    Shared\Web Server Extensions\15\CONFIG\Upgrade\WssUpgrade.xml'. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:02.37 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPXmlConfiguration ajy1t DEBUG Template upgrade:   Upgrade XML: <WebTemplate ID="1" LocaleId="*" FromProductVersion="4"
    BeginFromSchemaVersion="0" EndFromSchemaVersion="2" ToSchemaVersion="3" /> 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:02.37 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPXmlConfiguration ajy1q DEBUG Template upgrade:   FromProductVersion '4' does not match current database version '3' for template 'STS#0'. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:02.37 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPXmlConfiguration ajy1p DEBUG Template upgrade: Skipped upgrade WebTemplate XML for template 'STS#0' at: 'C:\Program Files\Common Files\Microsoft
    Shared\Web Server Extensions\15\CONFIG\Upgrade\WssUpgradeB2B.xml'. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:02.37 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPXmlConfiguration ajy1t DEBUG Template upgrade:   Upgrade XML: <WebTemplate ID="1" LocaleId="*" FromProductVersion="4"
    BeginFromSchemaVersion="0" EndFromSchemaVersion="2" ToSchemaVersion="3" /> 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:02.37 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPXmlConfiguration ajy1q DEBUG Template upgrade:   FromProductVersion '4' does not match current database version '3' for template 'STS#0'. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:02.37 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPWebTemplateSequenceForWeb ajy7f INFO Template STS#0: Web template upgrade for web/site [I deleted URL]6052f9bdc7c9
    02/28/2014 10:23:02.37 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPWebTemplateSequenceForWeb ajyw2 DEBUG SPRequest Objects=0 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:02.37 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPWebTemplateSequenceForWeb ajyw2 DEBUG SQL Query Count=0 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:02.37 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPWebTemplateSequenceForWeb ajyw2 DEBUG Execution Time=0.438254023905273 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:02.37 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPWebWssSequence ajyxl INFO [Navision] IsBackwardsCompatible = False, CurrentVersion = 4.0.25.0, BackwardsCompatibleSchemaVersion = 15.0.30.0, TargetSchemaVersion
    = 15.0.30.0. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:02.37 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPUpgradeSiteSession ajxn1 DEBUG UPGRADE PROGRESS: current object = [Navision], current sequence = [SPWebWssSequence], action 1 out of total 14 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:02.37 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPUpgradeSiteSession ajxn2 DEBUG UPGRADE PERCENTAGE: 5.21488095% done, Total Elapsed Time 00:00:08.8762641. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:02.37 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade VisualUpgradeAction15 (15.0.3.0) ajywc DEBUG Begin Initialize() 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:02.37 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade VisualUpgradeAction15 (15.0.3.0) ajywd DEBUG End Initialize() 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:02.37 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade VisualUpgradeAction15 (15.0.3.0) ajywe INFO Provision new master pages for O15 onto all webs and perform Visual Upgrade. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:02.37 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade VisualUpgradeAction15 (15.0.3.0) ajywf DEBUG Begin Upgrade() 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:02.42 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade VisualUpgradeAction15 (15.0.3.0) ajyqo INFO Modifying UIVersion field choices on the master page gallery in site: navision  Site Url: [I
    deleted URL]6052f9bdc7c9
    02/28/2014 10:23:03.65 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade VisualUpgradeAction15 (15.0.3.0) ajyqp INFO Provisioning seattle master page in site: navision  Site Url: [I deleted URL]6052f9bdc7c9
    02/28/2014 10:23:04.15 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPUtility ajy0k INFO Master page 'seattle.master' already exists in the master page gallery, so there is no need to provision it. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:04.15 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade VisualUpgradeAction15 (15.0.3.0) ajyqq INFO Updating masterpage in site: navision  Site Url: [I deleted URL]6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPWebWssSequence ajywk ERROR Action 15.0.3.0 of Microsoft.SharePoint.Upgrade.SPWebWssSequence failed. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPWebWssSequence ajywk ERROR Exception: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPWebWssSequence ajywk ERROR    at Microsoft.SharePoint.SPGlobal.HandleUnauthorizedAccessException(UnauthorizedAccessException ex)    
    at Microsoft.SharePoint.Library.SPRequest.OpenWeb(String bstrUrl, String& pbstrServerRelativeUrl, String& pbstrTitle, String& pbstrDescription, String& pbstrTitleResourceId, String& pbstrDescriptionResourceId, Guid& pguidID, DateTime&
    pdtTimeCreated, String& pbstrRequestAccessEmail, UInt32& pwebVersion, Guid& pguidScopeId, UInt32& pnAuthorID, UInt32& pnLanguage, UInt32& pnLocale, UInt16& pnTimeZone, Boolean& bTime24, Int16& pnCollation, UInt32& pnCollationLCID,
    Int16& pnCalendarType, Int16& pnAdjustHijriDays, Int16& pnAltCalendarType, Boolean& pbShowWeeks, Int16& pnFirstWeekOfYear, UInt32& pnFirstDayOfWeek, Int16& pnWorkDays, Int16& pnWorkDayStartHour, Int16& pnWorkDayEndHour,
    Int16& pnMeetingCount, Int32& plFlags, Boolean& bConnectedToPortal, String& pbstrPortalUrl, String& pbstrPortalName, Int32& plWebTemplateId, Int16& pnProvisionConfig, String& pbstrDefaultTheme, String& pbstrDefaultThemeCSSUrl,
    String& pbstrThemedCssFolderUrl, String& pbstrAlternateCSSUrl, String& pbstrCustomizedCssFileList, String& pbstrCustomJSUrl, String& pbstrAlternateHeaderUrl, String& pbstrMasterUrl, String& pbstrCustomMasterUrl, String& pbstrSiteLogoUrl,
    String& pbstrSiteLogoDescription, Object& pvarUser, Boolean& pvarIsAuditor, UInt64& ppermMask, Boolean& bUserIsSiteAdmin, Boolean& bHasUniquePerm, Guid& pguidUserInfoListID, Guid& pguidUniqueNavParent, Int32& plSiteFlags,
    DateTime& pdtLastContentChange, DateTime& pdtLastSecurityChange, String& pbstrWelcomePage, Boolean& pbOverwriteMUICultures, Boolean& pbMUIEnabled, String& pbstrAlternateMUICultures, Int32& plSiteSchemaMajorVersion, Int32& plSiteSchemaMinorVersion,
    Int32& plSiteSchemaBuildVersion, Int32& plSiteSchemaRevisionVersion, Int32& puiVersion, Int16& pnClientTag, Boolean& pfIsEvalSite, Guid& pgSourceSiteId, DateTime& pdtExpirationDate, Guid& pgEvalSiteId, Guid& pguidAppProductId,
    String& pbstrRemoteAppUrl, String& pbstrOAuthAppId, String& pbstrAppDatabaseName, Guid& pgAppDatabaseServerReferenceId, String& pbstrAppDatabaseTargetApplicationId, String& pbstrAppWebDomainId, Int32& plUpgradeFlags, DateTime&
    pdtReminderDate, UInt64& pmaskDeny)     at Microsoft.SharePoint.SPWeb.InitWeb()     at Microsoft.SharePoint.SPWeb.get_Title()     at Microsoft.SharePoint.SPSite.OpenWeb(Guid gWebId, Int32 mondoHint)    
    at Microsoft.SharePoint.SPWeb.<ClearMasterCssCaches>b__0()     at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()     at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated
    secureCode)     at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)     at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)    
    at Microsoft.SharePoint.SPWeb.Update()     at Microsoft.SharePoint.Upgrade.VisualUpgradeAction15.Upgrade()     at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade() 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade VisualUpgradeAction15 (15.0.3.0) ajywl DEBUG Begin Rollback() 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade VisualUpgradeAction15 (15.0.3.0) ajywm DEBUG End Rollback() 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade VisualUpgradeAction15 (15.0.3.0) ajywp DEBUG Begin Dispose() 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade VisualUpgradeAction15 (15.0.3.0) ajywq DEBUG End Dispose() 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade VisualUpgradeAction15 (15.0.3.0) ajywr DEBUG SPRequest Objects=6 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade VisualUpgradeAction15 (15.0.3.0) ajywr DEBUG SQL Query Count=17 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade VisualUpgradeAction15 (15.0.3.0) ajywr DEBUG Execution Time=4867.40689109929 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPUpgradeSiteSession ajxnk ERROR Upgrade [Navision] failed. Microsoft.SharePoint.Upgrade.SPWebWssSequence has the ContinueOnFailiure bit set. Moving
    on to the next object in sequence. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPUpgradeSiteSession ajxnk ERROR Inner Exception: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPUpgradeSiteSession ajxnk ERROR    at Microsoft.SharePoint.SPGlobal.HandleUnauthorizedAccessException(UnauthorizedAccessException ex)    
    at Microsoft.SharePoint.Library.SPRequest.OpenWeb(String bstrUrl, String& pbstrServerRelativeUrl, String& pbstrTitle, String& pbstrDescription, String& pbstrTitleResourceId, String& pbstrDescriptionResourceId, Guid& pguidID, DateTime&
    pdtTimeCreated, String& pbstrRequestAccessEmail, UInt32& pwebVersion, Guid& pguidScopeId, UInt32& pnAuthorID, UInt32& pnLanguage, UInt32& pnLocale, UInt16& pnTimeZone, Boolean& bTime24, Int16& pnCollation, UInt32& pnCollationLCID,
    Int16& pnCalendarType, Int16& pnAdjustHijriDays, Int16& pnAltCalendarType, Boolean& pbShowWeeks, Int16& pnFirstWeekOfYear, UInt32& pnFirstDayOfWeek, Int16& pnWorkDays, Int16& pnWorkDayStartHour, Int16& pnWorkDayEndHour,
    Int16& pnMeetingCount, Int32& plFlags, Boolean& bConnectedToPortal, String& pbstrPortalUrl, String& pbstrPortalName, Int32& plWebTemplateId, Int16& pnProvisionConfig, String& pbstrDefaultTheme, String& pbstrDefaultThemeCSSUrl,
    String& pbstrThemedCssFolderUrl, String& pbstrAlternateCSSUrl, String& pbstrCustomizedCssFileList, String& pbstrCustomJSUrl, String& pbstrAlternateHeaderUrl, String& pbstrMasterUrl, String& pbstrCustomMasterUrl, String& pbstrSiteLogoUrl,
    String& pbstrSiteLogoDescription, Object& pvarUser, Boolean& pvarIsAuditor, UInt64& ppermMask, Boolean& bUserIsSiteAdmin, Boolean& bHasUniquePerm, Guid& pguidUserInfoListID, Guid& pguidUniqueNavParent, Int32& plSiteFlags,
    DateTime& pdtLastContentChange, DateTime& pdtLastSecurityChange, String& pbstrWelcomePage, Boolean& pbOverwriteMUICultures, Boolean& pbMUIEnabled, String& pbstrAlternateMUICultures, Int32& plSiteSchemaMajorVersion, Int32& plSiteSchemaMinorVersion,
    Int32& plSiteSchemaBuildVersion, Int32& plSiteSchemaRevisionVersion, Int32& puiVersion, Int16& pnClientTag, Boolean& pfIsEvalSite, Guid& pgSourceSiteId, DateTime& pdtExpirationDate, Guid& pgEvalSiteId, Guid& pguidAppProductId,
    String& pbstrRemoteAppUrl, String& pbstrOAuthAppId, String& pbstrAppDatabaseName, Guid& pgAppDatabaseServerReferenceId, String& pbstrAppDatabaseTargetApplicationId, String& pbstrAppWebDomainId, Int32& plUpgradeFlags, DateTime&
    pdtReminderDate, UInt64& pmaskDeny)     at Microsoft.SharePoint.SPWeb.InitWeb()     at Microsoft.SharePoint.SPWeb.get_Title()     at Microsoft.SharePoint.SPSite.OpenWeb(Guid gWebId, Int32 mondoHint)    
    at Microsoft.SharePoint.SPWeb.<ClearMasterCssCaches>b__0()     at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()     at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated
    secureCode)     at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)     at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)    
    at Microsoft.SharePoint.SPWeb.Update()     at Microsoft.SharePoint.Upgrade.VisualUpgradeAction15.Upgrade()     at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade() 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPUpgradeSiteSession ajxnk ERROR Exception: Action 15.0.3.0 of Microsoft.SharePoint.Upgrade.SPWebWssSequence failed. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPUpgradeSiteSession ajxnk ERROR    at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()     at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object
    o, Boolean bRecurse) 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPUpgradeSiteSession ajxnn DEBUG Elapsed time upgrading [Navision]: 00:00:04. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPUpgradeSiteSession ajxn6 DEBUG Disposing Navision. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPUpgradeSiteSession ajxp7 DEBUG Found subweb template STS#0 (lcid: 1033) for ContentDatabase WSS_Content. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPUpgradeSiteSession ajxmf DEBUG CanUpgrade [Customer Service Team] returned: True. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPUpgradeSiteSession ajxnh DEBUG Customer Service Team IsGrown=False IsRoot=False IsLeaf=True. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPUpgradeSiteSession ajxmf DEBUG CanUpgrade [Customer Service Team] returned: True. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPWebTemplateSequenceForWeb ajy68 DEBUG Loading onet.xml at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\Template\SiteTemplates\STS\xml\onet.xml 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPWebTemplateSequenceForWeb ajy7b DEBUG Template STS#0: Calculated a target template version of '15.0.0.3' with target compatibility level of '15'
    for the 'STS#0' template. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPXmlConfiguration ajy1p DEBUG Template upgrade: Skipped upgrade WebTemplate XML for template 'STS#0' at: 'C:\Program Files\Common Files\Microsoft
    Shared\Web Server Extensions\15\CONFIG\Upgrade\WssUpgrade.xml'. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPXmlConfiguration ajy1t DEBUG Template upgrade:   Upgrade XML: <WebTemplate ID="1" LocaleId="*" FromProductVersion="4"
    BeginFromSchemaVersion="0" EndFromSchemaVersion="2" ToSchemaVersion="3" /> 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPXmlConfiguration ajy1q DEBUG Template upgrade:   FromProductVersion '4' does not match current database version '3' for template 'STS#0'. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPXmlConfiguration ajy1p DEBUG Template upgrade: Skipped upgrade WebTemplate XML for template 'STS#0' at: 'C:\Program Files\Common Files\Microsoft
    Shared\Web Server Extensions\15\CONFIG\Upgrade\WssUpgradeB2B.xml'. 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPXmlConfiguration ajy1t DEBUG Template upgrade:   Upgrade XML: <WebTemplate ID="1" LocaleId="*" FromProductVersion="4"
    BeginFromSchemaVersion="0" EndFromSchemaVersion="2" ToSchemaVersion="3" /> 42b4789c-6c14-203b-54a5-6052f9bdc7c9
    02/28/2014 10:23:07.24 OWSTIMER (0x0678) 0x0A50 SharePoint Foundation Upgrade SPXmlConfiguration ajy1q DEBUG Template upgrade:   FromProductVersion '4' does not match current database version '3' for template 'STS#0'. 42b4789c-6c14-203b-54a5-6052f9bdc7c9"

    do you have the any no access / locked sites in that database and also any site which exceed its quota.
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Acrobat 9.5, file corruption when combining .pdfs created from Word or Excel (from Office 2010) into a larger .pdf document

    In Acrobat 9, when I combine .pdfs created from Word or Excel (from Office 2010) into a larger .pdf document, there is data corruption. Some of the text appears as blank boxes when the pages are inserted into the larger .pdf, the main document. I have so far solved this by "printing" the files to .pdf, and then inserting them into the larger .pdf main document, but this creates a fatter .pdf file that is much larger than would otherwise be the case. Are there any other solutions within Acrobat 9, please? If this bug has been solved in Acrobat X or XI, please advise. Thanks.

    As far as the images are concerned, that may be a result of your choice of job settings. You may want to use the Press or Print option if the image quality is important. I assume you are talking about bit images in this case.
    As to the hangup, have you checked to see if AcroTray is active on your system? It may not be running as needed. In the meantime, try checking print to file and then opening that file in Distiller to complete the conversion to PDF.
    Before you ever try a reinstall, you need to do a repair first to see if that resolves the problem. There are a lot of unknowns about your exact process for the printing and your job settings that may be part of the problem. The rest of your system setup is useful in some cases, but did not help me see your problem.

  • Scripted Import MRU list from Office 2010.

    Hello all, i was wondering if anyone could help with this, we have a script that exports the MRUs as reg keys from office 2010, it exports the following as a .reg file on the source machine, and on the destination machine it imports the reg key so a user
    moving machines has all of their recent documents:
    Windows Registry Editor Version 5.00
    [HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Word\File MRU]
    "Max Display"=dword:00000019
    "Item 1"="[F00000000][T01CF9ABB0FC89840][O00000000]*C:\\Users\\USERNAME\\Documents\\FILENAME.xlsx"
    This works absolutely fine when coming from 2010 and going to 2010, however since we have put 2013 on the destination machines, the script doesn't work due to the user ID field being unique to each user:
    Windows Registry Editor Version 5.00
    [HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Excel\User MRU\AD_CC97ADD968A5532BF33D5693E751F2355768058F0819CBCF30AD727C87634047\File MRU]
    "Max Display"=dword:00000019
    "Item 1"="[F00000000][T01CF9ABB0FC89840][O00000000]*C:\\Users\\USERNAME\\Documents\\FILENAME.xlsx"
    would anyone know of a way to export from 2010, obtain the AD_CC9...... ID, and change the .reg file to this as part of a scripted import? 
    as it stands im having to open each application (word, excel, powerpoint) and click on file to generate the AD_CC..... reg key, then copy the key name from registry editor, and edit my 2010 exported .reg files to re-import manually on the destination machine.

    You might want to take a look at below thread:
    http://community.spiceworks.com/topic/461503-office-2013-and-recents-list
    http://social.technet.microsoft.com/Forums/en-US/07267496-cfcd-4cf0-810a-8ee91b213dfc/office-2007-to-2010-migrating-file-mru-not-working?forum=officesetupdeployprevious
    For a specific script, I would suggest you to seek assistance in Microsoft OneScript center, that's the dedicated place for script issues:
    http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
    Thanks,

  • Adobe 8 printing from office 2010

    I am having trouble with Adobe 8. Recently the issues we are having have been increasing rapidly. We have had trouble with 1 machine and formatted it/replaced it 3 times.
    We are using more and more 64 bit machines and we still run Adobe 8. We have issues were people cannot print to adobe from office 2010. We fix this with the first update for adobe 8, however after a few days we get the issue again but this time telling us we cannot print to adobe because the printer is not installed when it clearly is.
    I believe adobe 8 has compatibilty issues with 64 bit machines and I would like confirmation on this. We are in need of a permanent fix, we cannot go around having to troubleshoot PCs every day because of Adobe. Every day employees need to stop working because of an Adobe issue.
    Another issue we have on PCs is "A serious error has occured, reinstalling adobe may fix the problem" well guess what.. it doesn't.
    We also have adobe 9 pro but we cannot use it because its only able to be installed onto a PC where another adobe product is installed. But most of the users only use adobe acrobat and whatever else comes with it and are unable to install adobe 9 because in order to do so we need to remove 8 and when you remove 8 you lose the ability to install 9 because you can only install it due to having another adobe product installed on the PC.
    These issues are burning through time, time we need to fix actual issues not on adobe 8 constantly playing up.
    Thank you

    It is Acrobat's PDFMaker that processes Office applications' files to PDF.
    The only PDFMaker that supports Office 2010 is that associated with Acrobat X.
    See: http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
    Be well...

  • Osa.exe Missing From Office 2010

    Has osa.exe been removed from Office 2010? I can't seem to locate it. My installation was done as a custom install and selecting all options except for Access and Visio Viewer. Office is installed on Win 7 Enterprise x64.
    I tried to copy osa.exe from a machine with Office 2007 but when I run it with -n I get an error that says, "The operating system is not presently configured to run this application"
    John Marcum | http://myitforum.com/cs2/blogs/jmarcum |

    Nevermind, I found my own answer. I really like having "create new office document" pinned to my start menu. I guess that just no longer an option.
    Office Startup Assistant
    Although turned off by default in 2007 Microsoft Office system, the ability to create a new Office document from the
    Start menu, or Office Startup Assistant (OSA), is completely removed in Microsoft Office 2010. Users can no longer manually turn on the feature in the
    Start menu through Office 2010 setup or open a dialog box to create a new document in an Office 2010 application.
    This feature is replaced by the ability to create a new Office document for each Office 2010 application from the Microsoft Office Backstage by clicking
    New and then creating the document. In addition, the improved functionality is compatible with the 64-bit version of Office 2010.
    John Marcum | http://myitforum.com/cs2/blogs/jmarcum |

  • DPM 2012 Cannot modify or create protection groups after upgrading from DPM 2010

    Hi,
    We have recently upgraded from DPM 2010 to 2012.  Since the upgrade we have been unable to create new protection groups or add new datasources to an existing group.  Existing backups are running without errors. 
    We have tried checking the DPM sql user account permissions as described in
    this article but with no luck.  More searching has not provided any other relavent fixes.  We are now stuck on how to troubleshoot this any further.
    In the DPM console we get the following error adding a VM to an existing protection group:
    Modify protection group: Virtual Machines failed:
    Error 207: An unexpected error occurred on DPM server machine during a VSS operation.
    Error details: VssError:Shadow copying the specified volume is not supported.
     (0x8004230C)
    Recommended action: Retry the operation.
    Allocate Replica For \Backup Using Saved State\Cacti failed:
    Error 207: An unexpected error occurred on DPM server machine during a VSS operation.
    Error details: VssError:Shadow copying the specified volume is not supported.
     (0x8004230C)
    Recommended action: Retry the operation.
    In the event log we see:
    The description for Event ID 955 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    The consistency check resulted in the following changes to SQL Server Agent schedules: Schedules added: 1 Schedules removed: 1 Schedules updated: 0.  
    Problem Details:
    <ConsistencyCheck><__System><ID>26</ID><Seq>1534</Seq><TimeCreated>23/04/2012 09:33:29</TimeCreated><Source>SchedulerImpl.cs</Source><Line>719</Line><HasError>True</HasError></__System><Tags><JobSchedule
    /></Tags></ConsistencyCheck>
    the message resource is present but the message is not found in the string/message table
    Thanks in advance for any advice.

    Hi,
    The error 0x8004230C VSS_E_VOLUME_NOT_SUPPORTED: Shadow copying the specified volume is not supported, can only come when trying to enable shadow copies on new volumes created when trying to add new datasources to protection.   Generally speaking
    Only NTFS volumes greater that 1GB with a minimum of 300MB free space can be shadow copied, so something is going wrong with the volume creation / format process.  Please investigate that, see if two new volumes get created when protecting a new data
    source, and the sizes are greated that 1GB and also verify it's formatted NTFS.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • Migrating to office 365/Win 8.1 from Office 2010/Win 7.0 the Outlook Personal folders are missing.

    In Office 2010 I had emails archived into private data file personal folders/subfolders under Outlook 2010. My Office 2010 installation was wiped out when I upgraded from Windows 7 to Windows 8.1. The outlook.pst files are still available. When I installed
    Office 365 on my Windows 8.1 system, Outlook 365 picked up the .pst and populated the Inbox and Sent folders, but the archived email personal folders are not present, and also the contacts folder is empty. I haven't been able to figure out where on the hard
    drive the personal folders were actually archived (in Office 2010 ) or if Office 365 will even support showing these personal folders.

    Problem solved. I found a separate .pst file in my backups that contained the personal folders and the contacts. This file wasn't in the Win 8.1 documents\outlook files folder. So two .pst files are needed; one for the emails and the other for the personal
    folders.

  • Upgrading from Office 365 E1 to E4 - are we able to transition current phone numbers to Lync?

    We are currently looking in to upgrading our Office 365 account from E1 to E4. 
    We'd like to use Lync going forward for calls. Is is possible for each employee to have their current phone number reconfigured to sync with their Lync account. What kind of effort does this involve?

    Agree with both Anthony and Ben, but I thought I'd chime in and mention that with the Office 365 E4 subscription you get Enterprise Voice capabilities, but will require an on-premise deployment also. (which I personally find confusing as MS removed "hybrid"
    support around May last year but at the very bottom it says this on the E4 page
    Lync enterprise voice capabilities require a customer to purchase and deploy Lync Server, either on-premises or in a hosted data-center, to enhance or replace traditional PBX systems.)
    Having said that, according to this response from MS in the Office 365 forum, http://community.office365.com/en-us/forums/156/t/188567.aspx you get an on-premise license with
    the E4 subscription to facilitate voice.
    If this is the case, it would mean that you'd need to integrate this on-premise deployment with the PSTN network (through some sort of Media Gateway ) and you could in fact use your existing numbers.
    If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer" | Blog
    www.lynced.com.au | Twitter
    @imlynced

  • Upgraded MS Office 2010 to 2013, how do I get the pdf menu option in Word, Excel, etc - Using Acrobat X

    Hi
    Have just upgraded from MS Office 2010 to Office 2013.
    Have lost the menu option "Acrobat" for creating pdfs (using Acrobat X).
    How to I get it back?
    Cheers

    uninstall acrobat, clean (Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs) and reinstall acrobat.

Maybe you are looking for

  • I have two iCloud accounts and want to merge them

    I have accidently set up two iCloud accounts and now I need to merge them to get rid of one so that all my accounts are in one place. I have not been able to get my PC Outlook file synced with since Mobile Me is no longer available and I just now fig

  • EXCEL attachment as EMAIL to USER - When USER executes REPORT in BACKGROUND

    Hi Friends, I have 10 records in Internal Table. In BACK GROUND execution, I have to send this 10 records as EXCEL attachment through EMAIL to the USER who executed in background. How to do this? Thanks in advance. Regards, Viji.

  • Problem with replication based on materialized view

    Problem with replication based on materialized view... Given: 1. Source: S-1 2. Targets: T-1, T-2 3. DB links: from T-1 to S-1, from T-2 to S-1 Required replicate table TBL on S-1 to T-1, T-2 via db links. On S-1 was created materialized view log wit

  • How shall i run servlets in weblogic 8.1 sp2

              can any one assist me for running servlets in weblogic8.1 sp2.           thanking you,           chandra sekhar           

  • RAW impages lose color, clarity, detail when importing.........

    I use Canon's Professional Digital Software [OEM] to process RAW images from my 21 MP camera. Incredible color, sharpness and Clarity. Color is shot in sRGB and as part of processing, I sharpen, adjust color temperature, set exposure, etc. When I imp