Upgrading from os 10.4.11 to Leopard

I can't really find a proper place to post this, so I am posting this here. I am finally ready to upgrade to leopard. I just found out that you can only purchase from second parties like amazon. It is over a hundred bucks. I also see that Snow Leopard is very cheap. Do I need to first upgrade to Leopard before upgrading to Snow Leopard?
thanks

Hi mark, and a warm welcome to the forums!
Do you know of any decent reasonably-priced external drives that work with a PowerBook G4 with OS X v10.4.11?
Not sure of the reasonable part, but you need Firewire with a PB, here's one that works on any Mac 10.3 or above...
http://eshop.macsales.com/item/Other%20World%20Computing/MRF82SD22LS/
If you select your PB here...
http://eshop.macsales.com/shop/optical-drives/superdrives/
You can see internal replacements, they also have installation videos for most things.
Also, as Jazzhand mentioned I saw Snow Leopard 10.6 on Amazon for super cheap; obviously you can't vouch for an Amazon seller but in general do you think I'm OK to buy a used copy?
Except... PB G4s cannot run/use/install 10.6/Snow Leopard at all, only Intel based Macs can, 10.5/Leopard is as high as you can go...
Leopard requirements/10.5.x...
* Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
* 512MB of memory (I say 2GB at least)
* DVD drive for installation
* 9GB of available disk space (I say 30GB at least)
You have to call Apple & likely ask for a Product Specialist to get it, if they still have it!

Similar Messages

My iPhone 4S no longer syncs after upgrading from 10.5.8 to Snow Leopard 10.6.3

y iPhone 4S no longer syncs after upgrading from 10.5.8 to Snow Leopard 10.6.3 - any solutions out there?

Thanks - got stuck with the upgrade to 10.6.8, but Apple Support was able to navigate me through that, the date settings caused a problem here.

I'm trying to upgrade from 10.5.8 to Snow Leopard but my macbook keeps ejecting the disc. It started to install the first time and said it needed to restart to finish, restarted but ejected the disc. It ejects every time now.

I'm trying to upgrade from 10.5.8 to Snow Leopard but my macbook keeps ejecting the disc. It started to install the first time and said it needed to restart to finish, restarted but ejected the disc. It ejects every time now. I've also installed the 10.5.8 combo update but that didn't help it. I've tried restarting the macbook with the disc in, holding c, all that. Why won't this work?!

Zap the PRAM and Reset the SMC, then try again.

When I upgrade from OS10.5.8 to Snow Leopard will all my data transfer. If I need to back up what is the best way to do this?

I plan to upgrade from OS10.5.8 to Snow Leopard. Will all my data, applications and settings transfer automatically?
If I need to back up what is the best way to do this?

If everything works perfectly, your data should not be touched.
Personally I never trust my data to everything working perfectly.
I always backup everything twice at least.

I'm trying to upgrade from 10.5.8 to Snow Leopard

I'm trying to upgrade from 10.5.8 to Snow Leopard but keep getting an error message, "This update requires Mac OS X version 10.6.". Isn't Snow Leopard 10.6?....so now what?

It sounds more like you are trying to use an updater rather than the Snow Leopard installer DVD. You might read over the following:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s).

It's been a while since I upgraded my system. Is there anything I should do before upgrading from 10.5.8 to Snow Leopard other than backing up my files? The transition should be pretty seamless, right?

It's been a while since I upgraded my operating system. Is there anything I should do before upgrading from 10.5.8 to Snow Leopard other than backing up my files? The transition should be pretty seamless after installation, right?

How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current Tiger Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger and later.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s).

How do I upgrade from 10.5.8 to Snow Leopard??

My apologies if this answer can be found elsewhere, but I don't know where else to turn. How can I upgrade from OS 10.5.8 to snow leopard so THEN I can update to Lion? Can't do anything unless I already have 10.6 or higher and I don't. Now what? Everything on the apple store keeps pointing me to LION. It's like they are forcing you to get Lion, however I can't do that if I don't have the previous upgrades. Am I missing something? Please forgive if this is a dumb question or maybe I'm missing an obvious answer somewhere. Thanks in advance!

As others have stated... you now have to Telephone Apple to get a copy of Snow Leopard...
Purchase Snow Leopard or Lion
1-800-MY-APPLE or 1-800-676-2775
Then... Before attempting any Major Upgrade... get yourself an External Hard Drive... and create a Bootable Clone Backup of your current Hard Drive...
By far the easiest way to make such a Backup, is to use something like
SuperDuper http://www.shirt-pocket.com/
or CCC http://www.bombich.com/
That way, should anything untoward happen during the Upgrade,
you will NOT LOSE ANYTHING.
(Get an EHD that is at least equal to your current Drive...)
Also, Install as much RAM as your Mac will run...
It is important to get the Correct and Matching RAM
See Here > OWC RAM > http://www.macsales.com/
Lastly... with regards to Lion...
Check here for compatibility of 3rd party Software you may be using...
http://roaringapps.com/apps:table
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
Lion Tech Specs > http://support.apple.com/kb/SP629

Will I loose all my files and photos when I upgrade from 10.5.8 to Snow leopard

I have purchased Mac OS X Snow Leopard from the Mac store and I am ready to install it. Will I loose all my files and photos when I install it ? I am upgrading from 10.5.8 to 10.6.3 Snow leopard.

Before embarking on a major OS upgrade, it would be wise, advisable and very prudent if you backup your current system to an external connected and Mac formatted Flash drive OR externally connected USB, Thunderbolt or FireWire 800, Mac formatted hard drive. Then, use either OS X Time Machine app to backup your entire system to the external drive OR purchase, install and use a data cloning app, like CarbonCopyCloner or SuperDuper, to make an exact and bootable copy (clone) of your entire Mac's internal hard drive. This step is really needed in case something goes wrong with the install of the new OS or you simply do not like the new OS, you have a very easy way/procedure to return your Mac to its former working state.

How do i upgrade from os x 10.5.8 leopard to the newest software?

I would like to get the newest software for my macbook. I run system os x 10.5.8 (leopard i guess).
Thanks for answering!
My problem is: i dont have the app store installed. So how can i upgrade?!

You can purchase Snow Leopard from the Apple Store ( and numerous resellers). It costs about $30, plus state taxes.
10.6.6 up to 10.6.8 will install the "App Store" where you can purchase and download "Lion" (10.7).
Make sure your machine meets the Lion install requirements before you buy.

Upgrade from 10.4.11 to Snow Leopard without Leopard?

I'm trying to upgrade from OS X 10.4.11 to Snow Leopard. (At this point it's been such a headache that I don't even care about Lion.) If I've read correctly, I need to first upgrade to OS X 10.5 Leopard. The only problem is that I can't seem to find it anywhere on the Apple site. I even searched for the Mac Box Set that included Leopard, Snow Leopard, and iLife and can't find it either. I went to an Apple store today and they didn't even Snow Leopard on the shelf. Anyone know how I can get from 10.4.11 to Snow Leopard? Do I still need to go to Leopard first? I tried looking at the requirements/tech specs for the Snow Leopard install disc in the online store, but that link takes me straight to the tech specs for Lion. Any help would be greatly appreciated!

Hello,
If I've read correctly, I need to first upgrade to OS X 10.5 Leopard.
You read correctly, but that info isn't correct, if your Mac can hadle 10.6 then the $29 Disc will install on 10.4.x...
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they do still have Snow Leopard:
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.

Upgrading from 10.4.11 'Tiger' to Leopard

Hi, I have a mac running on 10.4.11 and someone bought my daughter 'iLife 09' as a Christmas Present but we cannot install it unless we have Leopard Software. Is there anyway to 'upgrade' to Leopard without having to go out and buy a whole new Snow Leopard Software package. I took the iLife 09 back to the apple store to get a refund - because I thought I might as well just buy the new Snow Leopard as it is included in this - but as it had been opened (my daughter tried to install it) they would not give a refund. So if I can upgrade at a relatively low cost to Leopard, then I can install iLife so it won't have gone to waste. Can anyone advise? Apple told me to ring one of the London stores and ask for the 'Archive' department, but I'm sure I read somewhere that it is possible to upgrade online. Look forward to hearing from .... someone ... ?! Thanks. Shona

Kappy wrote:
Alternatively you can purchase the Apple Boxed Set at $169 USD that contains iLife, iWork, Leopard, and Snow Leopard.
AFAICT, the boxed set doesn't contain a separate Leopard installer, only Snow Leopard, which may not work on the iMac in question. Apple's phone sales is the only Apple outlet for the retail Leopard installer—$129 USD.
mstetz wrote:
It's too bad that it would violate Apples TOS if you bought the US$30 Snow Leopard upgrade intended for Leopard users and installed it over Tiger.
That's not true. See http://discussions.apple.com/thread.jspa?threadID=2304131

Can I upgrade from Panther 10.3.9 to Leopard 10.5.2?

I have a Powerbook G4 running 10.3.9. Can I use the OSX 10.5.2 disks from a newer MacBook Pro to upgrade the G4? I tried but a message comes up saying 'you cannot install this software on this computer' but I'd like to know why.

Limnos is correct. Also, note, the Find File system of 10.5 is much weaker than 10.3.9 for locating files quickly by name. Though if you find files mainly by content, then it is better to have Spotlight. See this thread on how difficult it is to work with Spotlight based systems:
http://discussions.apple.com/thread.jspa?threadID=1861415&start=0&tstart=0
Amnesty offers Dashboard Widgets without Tiger or Leopard:
http://www.amnestywidgets.com/WidgetBrowser.html
Launchbar offers almost the same facilities as Spotlight without getting rid of the Find File in the Finder that is faster for simple find by name file finding:
http://www.obdev.at/products/launchbar/
Maybe this is an opportunity to decide if you really want to upgrade that machine to Leopard or Tiger, or just stick with Panther. Unless you have some software that is Mac OS X 10.5 or 10.4 only compatible, I see no reason to upgrade your Panther machine to Tiger or Leopard. Furthermore, Upgrading to Leopard will disable the Classic environment, unless you add an Firewire external hard drive with 10.4.11 or earlier, or erase and partition your hard drive to have 10.4.11 or earlier on it.

Upgrading from Tiger Intel Mac XServe to Leopard

Hi,
I would like to find out whether if i have existing shared folders and users, when upgrading from Tiger to Leopard Intel Mac XServe, will there be any problem? Do i need to backup any database or files? I would appreciate if anyone could help me.
Thank you!
Cheers,
Stephanie

Server forum is here:
http://discussions.apple.com/category.jspa?categoryID=96
Would you ever upgrade or install patches even, and not first make a backup?
How do you plan to do the upgrade? over top of Tiger, without backup first?

Upgrading from 10.4 to 10.5 Leopard? or 10.6 Snow Leopard?

OK, I am a slow adapter. I am still working with OS X 10.4.11 and now need to upgrade to 10.5 or 10.6 Snow Leopard. The problem? Where do I FIND this on Apple.com? Seriously, I've browsed and searched, but cannot find a product offering upgrade from 10.4 series! Any suggestions?

Click here for the package you need. There never was a discounted upgrade from Mac OS X 10.4, and the upgrade package for people who purchased a Mac shortly before Mac OS X 10.6 came out expired long ago.
(48367)

IMac upgrade from 10.5.8 to Snow Leopard

Can I upgrade my system from 10.5.8 to Snow Leopard?
Here are my system specs:
Model Name:          iMac
Model Identifier:          iMac8,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.8 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          4 GB
Grateful for any tips (I'm backing up right now!)

Many thanks for your responses.
I bought the Snow Leopard DVD from the App Store (AU$20.99), it arrived in 24-48hrs and the install was a breeze.
First, I backed up to an external hard drive with Time Machine, in case of any mishaps (this took a couple of hours). It took about an hour for the initial Snow Leopard install and then another 30 mins or so for the Mac OS X 10.6.8 Update Combo to upload (available online through software updates).
I was able to update both my iMac and MacBook from the same disk.
Now, my EyeTV Diversity is running well (the original reason for thinking about an upgrade) and I'm happy to be back in the land of serviced operating systems!

Upgrading from 10.5.8 to Snow leopard

Is there an upgrade from my system to snow leopard???? or a complete reinstall??

You have to purchase the Snow Leopard DVD ($29.00) and then upgrade your system. Or you can erase the drive and install from scratch. Your choice. If you choose to upgrade then do the following:
System Upgrade and Installation Procedure
Basic Caveats
1. Disconnect all peripherals except the original mouse and keyboard.
2. Quit all applications if this is not an installation from an Installer DVD.
3. The installation process should not be interrupted. If a power outage or other interruption occurs during installation you may have to erase the hard drive and reinstall from scratch.
4. Once the installation begins do not use the computer in any way except to reply to dialog prompts or to restart when the installation is completed. This is especially critical during the installation stage known as "Optimizing the System."
System Update Procedure
A. Repair hard drive and permissions.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.1 for Leopard) and/or TechTool Pro (4.6.2 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. Note that Disk Warrior will not work on Intel Macs.
B. Clone your existing system to an external Firewire drive.
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the startup or source volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Drag the startup or source volume to the Source entry field.
5. Select the backup or destination volume from the leftside list and drag it to the Destination entry field.
6. Check the box to Erase Destination. Skip this step if you've already formatted the drive.
7. Double-check you got it right, then click on the Restore button.
C. Decide upon an installation option.
You have three upgrade options. If you use the Upgrade installation option be sure you have repaired the hard drive and permissions first and made your backup. If you choose the Archive and Install option then you only need to repair the hard drive. Note that Show Leopard does not have an Archive and Install option since that is done by default unless the drive is erased in advance.
Neither of the above options will erase the disk. Some of your software may not work with a new system. You will need to upgrade those programs. It would be best to do the upgrades to your software before upgrading to the new system version.

Upgrading from os 10.4.11 to Leopard

Similar Messages

Maybe you are looking for