Upgrading from P3e to P6 enterprise using existing licences.

HELP !Please provide assistance especially from Primavera oracle agent to upgrade ourusing existing licences from P3e to P6 enterprise.

I can't say for certain. I can only tell you what I did.
Based on my understanding of how iMovie works, the Project file contains paths to the Event video clips in your iMovie Events, paths to the video clips in iPhoto (or Aperture), paths to music, paths to photos in iPhoto or Aperture.
One of these that can be automatically updated is to move Events to another drive within iMovie.
Another "automatic" update is to move the default iPhoto library to a different disk, but with the same name. That should still work.
However, iMovie will not make the leap from iPhoto to Aperture for either stills or videos, as far as I know.
When I switched to Aperture recently, I brought in my iPhoto photos as referenced, and left the videos in place.
Alternatively, you could bring in your iPhoto photos to Aperture Library (not referenced) but leave the iPhoto Library intact somewhere. You could delete images or clips if you were absolutely sure they were not referenced in iMovie.
I am enjoying Aperture, but it is difficult to make a clean break.

Similar Messages

Upgrading from 4.6C to Enterprise 4.70

Looking for high level documentation / presentation with regard to functionality / pitfalls when upgrading from 4.6C to Enterprise 4.7 which can be used to demonstrate to my client.

Hi Terence,
Pl check this <a href="https://websmp201.sap-ag.de/upgrade">OSS Link</a>
<a href="http://www.thespot4sap.com/upgrade_guide_v2.pdf">Upgrade Guide</a>
Regards,
Suresh Datti
P.S. PL reward points if the answer is helpful

Question regarding Upgrading from Standard Edition to Enterprise Edition

DB version:10gR2
We want to upgrade from Standard Edition to Enterprise Edition.
In the following documention
http://download.oracle.com/docs/cd/B19306_01/server.102/b14238/intro.htm#BABFBJCC
It talks about
Deinstall the Standard Edition server software.I don't understand what they mean by DeInstall the software.
Question 1.
By 'DeInstall' , they mean , use DeInstall Products in the Welcome screen of Oracle Universal Installer and Remove the chosen OUI Home.Right?
Question 2.
If i 'Deinstall' (ie. remove the software), all the binaries are lost. Right? So what is the point of having just the data files?
Edited by: Citizen_2 on Apr 8, 2009 1:59 AM

Citizen_2 wrote:
DB version:10gR2
Question 1.
By 'DeInstall' , they mean , use DeInstall Products in the Welcome screen of Oracle Universal Installer and Remove the chosen OUI Home.Right?Yes, that means use OUI and deinstall the Standard Edition
Question 2.
If i 'Deinstall' (ie. remove the software), all the binaries are lost. Right? So what is the point of having just the data files?Because next point says install Enterprise Edition. For first get rid of old one and then install the needed one. There is no such option as upgrade in this case.

TA48312 I NEED TO UPGRADE FROM 10.5.8 TO USE MY ITUNES MATCH, WHAT DO I NEED TO DO TO DO THIS? I HAVE PAID FOR IT AND HAVE DONE ALL THE NECESSARY TASKS TO GET ICLOUD UP BUT MY ITUNES WILL NOT WORK?

I NEED TO UPGRADE FROM 10.5.8 TO USE MY ITUNES MATCH, WHAT DO I NEED TO DO TO DO THIS? I HAVE PAID FOR IT AND HAVE DONE ALL THE NECESSARY TASKS TO GET ICLOUD UP BUT MY ITUNES WILL NOT WORK?

jbrie8210 wrote:
I NEED TO UPGRADE FROM 10.5.8 ...
The first step in Upgrading... is to Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
Be sure to make a Backup of your Current System Before Upgrading...
Next...
Upgrade to Mountain Lion
With Regard to ML... Check here for compatibility of 3rd party Software you may be using... Also note that Rosetta is no longer supported in Lion and Mountain Lion...
http://roaringapps.com/apps:table
You should also consider more RAM... Get the Maximum you can for your Mac...
It is important to get the Correct and Matching RAM
See Here > OWC RAM > http://www.macsales.com
The above site also has videos on how to Install RAM should you need it...

I upgraded from 3gs and want to use my old 3gs as an ipod. how can i update my new apple ID on the 3gs as it still shows a previous one that I had?

I recently upgraded from 3Gs to Iphone4 and want to use my old 3Gs as an ipod. how can i update
the user ID on the 3gs to a new one that I have as it is still showing a previous user ID?

Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.

Hello when i upgrade from 4 to 4S will my existing text messages migrate over?

HI when i upgrade from iPhone 4 to iPhone 4S will my existing text messages migrate.....

If you back up your iphone 4, and when you get the iphone 4S, you would have to restore from back up and you will have all your existing text messages. If you set your iphone 4S as a "New Phone" then it will start from fresh and no existing text message will be in there

Upgrading from kernel 2.4.32 using pacman

i had to install arch with kernel version 2.4 because of the NIC driver that would not compile under 2.6. now i want to update the system but when i tried pacman -Syu i got a whole lot of ERROR: kernel too old messages. after that kernel would panic no matter what i tried passing during boot. i gave up and re-installed the system with kernel 2.4. what is the best way to upgrade the system and is there a way to avoid all of the previous problems? is it better to first upgrade kernel by itself and than all other packages or the other way around? thanks...
p.s. if i compiled the NIC driver using kernel 2.4 will it still work after upgrading to 2.6?

Pierre wrote:Imho the current Arch version does not run with kernels lower than 2.6.16 (or was it 2.6.9, I am not sure). Anyway: If you want to use kernel24 you have to downgrade glibc and compile (everything) yourself.
i am not sure i understand... is there no way to upgrade from 2.4 to 2.6 using pacman?

Hyper-V host server upgrade from Server 2008 R2 Enterprise SP1 to Server 2012 R2 Datacentre

We are about to upgrade our Hyper-V host servers from Server 2008R2 Enterprise SP1 to Server 2012 R2 Datacentre to take advantage of the latest Hyper-V features.
This only concerns the host servers and not the guest VMs running on the hosts (they will be upgraded next year).
This is what is running on our host servers:
Host 1
File,print & issuing CA server
Exchange 2010
SharePoint 2010
Quickbooks server
Domain controller 1
Offline CRL CA
Host 2
SQL 2008
Forefront TMG 2010
Domain Controller 2
Windows 7 client
With this is mind, I have drafted a rough action plan as follows:
Create a list of all file locations for VM memory, snapshots, virtual memory and Hyper-V config files
Document all existing system settings
Gather server information, download drivers, RAID controller and other boot drivers & firmware updates (in case the in-place upgrade fails)
Test all software media
Copy all VMs onto external data storage (NAS drive)
As part of the upgrade process we will redistribute some hard drive space i.e.
expand them to their new sizes and verify the data integrity of copied VMs by powering up each VM in a test environment
Wipe and adjust the sizes of the host partitions to accommodate the expanded VMs
Perform an in-place upgrade to Server 2012 R2 Datacenter
Check EV, services etc
Change the default locations for VM memory, snapshots, virtual memory and Hyper-V config files
Upgrade Anti-virus and other system software
Test the system
Are there any glaring omissions? Does anyone have any tips they can give me?

Hi Marco,
always do a fresh Installation of your hyper-V Hosts, you could end up doing a lot of Troubleshooting with Drivers,Addons etc.. new Installation ist way faster.
Depending if you have a Cluster or Standalone Servers there are different ways to do it.
When you have installed your 2012 R2 Hyper-V Server you just can Import the VMs from the new Location.
As far as i know VMs with snapshots are not supported, so you have to remove them before doing that move and commit the changes to the vhd files, the VM need to be offline on 2008R2 to do that.
You do not Need to Export the VMs on 2008R2, just copy it, normaly you should have all Files of a VM in one Folder.
A working Backup is always your friend on such Tasks.
When the VMs are running on Hyper-V 2012R2 do not forget to Update the Integration Services.
Make Sure your Servers Hardware are still supported with 2012R2, see Server Catalog and Support Matrix of the Vendor.
And last one, where possible and supported convert the VHDs to VHDx Disks, after testing the first boot of the VM.
Udo

Upgrade from 3.0 to 3.1 existing applications' images do not work unless

the flow_image_prefix alias value in wwv_flows is manually updated to point to the new alias. Should the 3.1 install script use the alias value entered on the initial command line to update these values? I had the same problem when upgrading to 3.0 from 2.1. Also, the ias console does not like the PlsqlRequestValidationFunction parameter when added to the dads.conf file for the HTTP_Server. Is this parameter only recognizable to AS versions after 9.0.4?
Thanks,
Mike

I remember that there could be some invalid public synonyms after you drop one of the FLOWS schemas. So you might check that.
Matthias
Edit: if you have Metalink access, check Note: 555624.1 "Can We Safely Remove Old Flows_xxx Accounts After An Upgrade Of Apex?"
Edited by: mhoys on Nov 3, 2008 11:29 AM

After upgrade from SP2010 Foundation to Enterprise, services/features are missing

Hi
I recently upgraded the SharePoint 2010 Foundation, that was installed with TFS 2012, to Enterprise. The upgrade went through. The Products and Configuration wizard ran through to 100% without errors, however there are no Enterprise services available
on the Services on server page.
The main ones that I'm missing (that I really wanted to use) are:
Secure Store
Managed Metadata
Web analytics
SharePoint Server Search
Excel Services
These ones are there (these are non foundation as far as I'm aware)
PerformancePoint services
User Profile and User Profiles Sync
Business Data Connectivity
Also the service applications for the missing services are also missing, where as the services applications for the present services are available to be provisioned.
I've tried re-running the following commands:
Psconfig -cmd helpcollections
Psconfig -cmd services -install
Psconfig -cmd installfeatures
Psconfig -cmd applicationcontent -install
I've also run that Enable upgraded features option in Central Admin that goes through the web apps/Site collections and sites and enables all the enterprise features. That did nothing.
Any ideas?

Run:
Install-SPService
That will install all services on the farm.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Can I upgrade from Tiger to snow leopard using an external DVD drive

I've been trying to upgrade to Snow Leopard from Tiger but keep nothing happens. I keep getting a grey folder with a question mark on it. Can anyone tell me what this means?

If you have another Mac with Firewire, you can use it's Optical Drive as a big Firewire Optical, put the Install disc in the other Mac, boot the other Mac in to
Target mode...
http://support.apple.com/kb/HT1661
Connect a fw cable, use the Otion key on this one to choose the Install Disc in the other Mac.
Can I install if I make a bootable copy to my firewire external?
Yes, especially if you have a small 5 to 9GB Partition, you can use DU to Restore the Install Disc to that.

Generate a runtime req xml from a jsp and then use existing idc webservice

Hi,
I need to write a jsp that will generate a runtime SOAP request xml intaking the paramters that I had put into the jsp and thereby take the response from the response xml , extract that and show that in a result.jsp
I will be grateful if anybody can help to do this as I am not sure how I can generate the runtime xml and thereby use the existing Idc webservices.Please help!

Hey,
Did you get info or solution?

Upgrade from SAP R/3 Enterprise 4.70 to ECC 6.0

Hi experts,
I am currently trying to build some knowledge for my final project. (Working as an apprentice in computer science atm)
Main goal of the project is to upgrade our dev system to ECC 6.0.
As far as I understand it, ECC 6.0 ONLY works with NetWeaver 7.0. Do I need to upgrade to NW7 before I upgrade to ECC 6.0 or is there a all-in-one package, which upgrades both at once?
I browsed through a few upgrade guides but didn't really find an explaination I could understand...
Could someone describe the basic steps for such an upgrade? (Like: Copy System - Upgrade NW - Install Components....)
Kinda desperate
Thanks in advance!
Sandro Bollschweiler
P.s.: I hope I used the right Forum for my question...

Hi,
When you upgrade to SAP ERP 6.0 (ECC 6.0), the underlying technology within the SAP R/3 4.7 system is automatically upgraded to the SAP NetWeaver 7.0 version. It is one upgrade;
SAP R/3 4.7 -
> upgrade -
> SAP ERP 6.0
SAP Web AS -
> SAP NetWeaver 7.0
The upgrade guides are you best place for information. The SAP ERP 6.0 has the steps to follow and all requirements.
For installations, please see the aptly named installation guide title "Master guide - SAP ERP 6.0". Both the upgrade and installation guides are available at service.sap.com/instguides.
For system copy info, see the SDN page: System Copy and Migration
There is some demo examples here too
All the best,
Mike.

How to upgrade from PowerPC G4 w/1GB using CS2 to Mac Pro w/2GB running CS3

Hello. I have a Mac PowerPC G4 with 1GB of RAM and I'm running OS X 10.4.11. I'm using CS2 ver 9.0.2.
I have a new Mac Pro with 2GB of RAM and I'm running OS X v10.5.2.
I would like to run CS3 on my new Mac Pro.
Could anyone guide me in accomplishing this? I'd like to buy the upgrade to CS3 of course.
I can't figure out how to do this because of course I want to just load CS3 on the new computer but I want to pay for just the upgrade. And, if I buy the upgrade, I'm not sure my old computer will run CS3.
Thanks,
Deena

Deena,
In addition to the previous comments, before you do this though, I recommend that you put more RAM in your computers (particularly the G4) so they don't choke trying to run CS3, your operating system, and whatever else you have running. Also check your hard drive free space, particularly on your older Mac, so that you have scratch disk space and place to store at least some of your images.
And in preparation for the CS3 installation (which is really quite easy), be sure you boot off the System Disk and use Disk Utility to repair permissions and the disk and boot off the DiskWarrior disk and run repairs as well. Repeat repair permissions after the installation. These maintenance routines will help insure that your new CS3 runs well.
You will find that you have both CS2 and CS3 on your drive. You can safely uninstall CS2 if you wish.
If you have questions about any of this, please get back to us.
Neil

Upgrading from iPhone 3 to a used iPhone 3GS

Hi,
I just got the iPhone 4, and would like to give my old iPhone 3GS to my father, who uses an iPhone 3.
Is this as simple as:
-wiping all my data off
-switching the SIM card
-sync with my father's itunes
I know that the complete phone wipe puts the phone into the state it was in when first purchased, so I'm leery of doing that before double-checking.
Or, am I destined to have to go to an Apple or ATT store?
thanks!

Are you running iTunes 11.0.1 (current version)? If not, get it at http://www.apple.com/itunes

Upgrading from P3e to P6 enterprise using existing licences.

Similar Messages

Maybe you are looking for