Upgrading from Prime 1.2 to 1.3 - What about WLC version?
If I upgrade to prime v1.3, from v1.2, am I required to upgrade my WLC controllers to v7.4, or will my current version (v7.2) work fine?
Thanks.
No upgrade to your WLCs is required. Any v7.0 or later should be fine. See the Release Notes here for details.
Similar Messages
-
I need to upgrade from Mac OS x 10.6 8 what is the next step?
I need to upgrade from Mac OS x 10.6 8 what is the next step?
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later.
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model
Identifier 5,1 or later.
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later.
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later.
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later.
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later.
7. Xserve (Early 2009) - Model Identifier 3,1 or later.
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks/Yosemite- System Requirements
Macs that can be upgraded to OS X Yosemite
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps. -
Here are my specs:
Model Name: iMac
Model Identifier: iMac8,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 2 GB
Bus Speed: 1.07 GHz
I am trying to upgrade from Mac OS X 10.5.8 which is outdated to the latest version which is compatible on my computer? Does apple have an online adress for upgrading? I cannot pay for it right now.
Thank youUpgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks/Yosemite- System Requirements
Macs that can be upgraded to OS X Yosemite
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps. -
Upgrade from 7.0.235 to 7.0.240 5508 WLC
Does anyone see a reason to upgrade from 7.0.235 to 7.0.240? I can't go any higher right because we are still using WCS. I read the white papers but as far as I can tell there are no new features..
Leo is a risky Australian.... beware
You might be able to get it to work, just Cisco will not support it. They need to keep the LifeCycle going $$$$$$$
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered" -
HT4439 Can i upgrade from OS X 10.6.4 to a later OS version?
Can i upgrade from OS X 10.6.4 to a later OS X version? I cannot install the JAVA version that i require.
First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info When System Profiler comes up check the Model Identifier and post it back here.
-
Upgrade from trial xi pro to full - asks what "i currently own " but trial not in list?
have the trial xi pro adobe but want to upgrade now, how do i do this and what do i currently own in the drop down list?
When you buy an upgrade, you have to choose what you already own - an older version of Acrobat. If you have the trial and want to license it, that's not an "upgrade" (otherwise nobody would ever need to pay full price).
-
Look at original question. When I did the download to the new 6.0 it said everything was fine. Then when I tried to use the firefox again it said an older version needed to shut down my computer so that it could upgrade the old version. It wont let me do anything and all it says is shut down computer so old version can upgrade. It wont let me open the program or remove it or anything. PLease help me with this. I really like Firefox but this has been going on for 5 months now and I still dont get answers from you. How do I fix this???
Look at original question. When I did the download to the new 6.0 it said everything was fine. Then when I tried to use the firefox again it said an older version needed to shut down my computer so that it could upgrade the old version. It wont let me do anything and all it says is shut down computer so old version can upgrade. It wont let me open the program or remove it or anything. PLease help me with this. I really like Firefox but this has been going on for 5 months now and I still dont get answers from you. How do I fix this???
-
Upgrading from Powerbook G4 to Macbook Pro. What to expect in HDV?
I have Final Cut Pro 5.1
I do alot of editing in HDV. Although editing HDV on my Powerbook in FCP is possible, it's a little slow and rendering times are a little painful. What kinds of speed/rendering improvements should I see if I purchase one of the new Macbook pros? What are some of the everyday improvements in FCP that you noticed by upgrading?
thanks in advance,
daveyou are in for such a treat!
i don't have specific numbers for you, but the difference in performance of these machines is substantial
quite apart from cpu's and clock speeds, the MBP's have also got across the board better faster components such as faster beefier gfx gpu's, SATA hard discs etc
this year old comparison from barefeats pits a 2.0 GHz Powerbook G4 against a now very much outdated 2.0 GHz MBP Core Duo
http://www.barefeats.com/pbcd.html
given that the current MBP's not only have a notably faster core clock speed than the earlier models, and also the newer generation of the chipset, Core 2 Duo vs the original Core Duo is significantly faster in itself at the same clock speed
http://www.barefeats.com/mbcd9.html
Enjoy
Andy -
How to upgrade from 11.1.2 to latest 11.1.2.1 version on windows
Hi Experts,
I want to upgrade Planning, EPMA and reporting from 11.1.2 to 11.1.2.1.
should i download 11.1.2.1 then unzip and install.tool. and use maintenence option to install.
Kindly suggest correct steps so that i can save my troubleshoot time.
Regards
KumarHi Kumar,
This is recently discussed in the Essbase Forum: Upgrade to 11.1.2.1
Cheers,
Mehmet -
What do I need to purchase to update my IMac with the OS X 10.5.8 operating system?
All Intel iMac's can run 10.6 Snow Leopard.
To get it, go to > Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)
If you want Mountain Lion, you wiil need to check and see if it meets the requirements.
see > Upgrade your Mac to OS X Mountain Lion. -
Upgrade from EDGE 3.0 -- EDGE 3.1: What to do with the new SAP transports?
Hello together,
we upgraded our EDGE 3.0 System to EDGE 3.1.
Also we upgraded the SAP integration kit.
Everything seems to work fine.
With the EDGE 3.1 Integration pack there are also new SAP transports included.
Now there are a few questions. Hope someone can help me with this
Do we have to import them?
Can we still use the "old" transports already imported in SAP?
Can we just "override" the "old" transports?
Is there an performance improvement (especially with WebI) with the new transports?
Thanks very much in advance!
With kind regards
SebastianIngo,
If I do a fresh install of BOXI 3.1 Edge SP2...do I have to import the original transports or can I go directly to the SP2 "version" of the transports?
Thanks.
Kevin -
Can l upgrade from Mac OSX 10.4.11 to what?? and how
AND HOW
Looks like you are good for Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
But first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
Be sure to make a Backup of your Current System Before Upgrading...
You should also consider more RAM... Get the Maximum you can for your Mac...
It is important to get the Correct and Matching RAM
See Here > OWC RAM > http://www.macsales.com
Check the Requirements for Mountain Lion Here...
Upgrade to Mountain Lion
If you decide to Upgrade past Snow Leopard...
Check here for compatibility of 3rd party Software you may be using...
http://roaringapps.com/apps:table -
I have just upgraded from Elements 11 to 12 but have bought the Windows version
I am a Mac user. I cannnot seem to email Support. I know how software companies make it impossible to make direct contact. Can anyone help?
The PSE serial number is multi-platform: works on Windows and Mac.
Download the Mac installer from the Adobe website, install and enter your serial number.
http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=en -
I have an iPhone 4 and backed it up to laptop to iTunes then tried to upgrade 5.1.1 to 6.1 and it locked up. It actually just reboots directly to the itunes logo with a USB indicator.
What should I do?
This iPhone is used by a drug rehab center and is important.
Thank you in advance!
Ron SemanIf not successfully try the other actions of:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hi,
I have just finished editing a short movie based on some high res stills combined with some 1080i HDV footage.
After completing the edit in CS4 (in a HDV 1080i environment) I went through Adobe Media Encoder in order to downsize and converting into an m2v file ready for my Encore project.
As you probably well know this is far from satisfactory in terms of the down sampling capabities shown by AME as well as the lack of proper colour conversion.
So, after giving up on the Dan Isaacs method, AVI synth didnt seem friendly to this user... as well as the inability of CS4 to frameserve..
My solution was to exported the Microsoft AVI using the HUFFYUV codec at 100% - With Progressive scan, when ever I interlaced my output it showed obvious interlacing in my player, odd or even fields first...
I then used VirtualDub to do the down sizing
Finally Procoder 3 to convert to m2v.
The results still have no proper colour conversion properties but look much sharper than the regular CS4 encode using AME
OK, that took an eternity to discover and still leaves me with another problem.
I want to export straight from CS4 to media type that can be played on both PC and Macs in HD.
Before I go down another gruop of dead ends and trial and error discoveries, could anyone here suggest a recomended and successful workflow?
Many thanks,
Phil.let me see if I can help out a little here.
The problem with converting 1080i to SD in software is that FCP seems to do a not-very-good job of downsampling the image, particularly when you are going directly to DV. Details get blurry, and other compression artifacts become quite noticeable. I have also experienced trouble with the HDV fields not getting processed correctly if I go to SD mpeg directly from an HDV timeline or movie file.
Your best bet is one of the following workflows:
Export a 1080i HDV or AIC movie file and re-import to FCP. Place this clip into an anamorphic SD sequence. It doesn't matter if the sequence is DV or Uncompressed if you send the sequence directly to Compressor from FCP, because this will ignore any rendered material and use an uncompressed image buffer as it encodes the mpeg. Do not letterbox your widescreen video if you are going to DVD - widescreen DVD video should always be full-frame anamorphic.
Your other option is to attempt to use Compressor to down-res the sequence or a self-contained movie of your HDV, starting with one of the advnace format conversion presets in Compressor. However, you'll have to cutstomize the preset by turning on the frame controls, and testing the settings to make sure you are happy with the result. Turning on frame controls will increase the ratio of your encoding time anywhere from 4 to 20:1.
I have tried all of these methods, and none of them look as good as capturing the downconverted video from the deck after mastering to HDV tape.
Hope this helps -
Max Average
Maybe you are looking for
-
After updating to 5.0 lost the apps I had purchased. They Still appear on app site. Do i have to reinstall them all and will it cost me again?
-
I by mistake deleted my Mac App store. How to get it back?
I deleted my Mac App store by mistake. How to get it bak on os x 10.6.8? I tried software update but it did not work. Also, how to update it to latest version of os x
-
Can I set Adobe to be my default printer
I am on OS Lion and am trying to make Adobe X my default printer as I can in windows, but with no luck. Any ideas?
-
Quicktime 7.5.5 SANYO Xacti MP4 movie file Audio Sync Bug..
Hello. I am awkward in English. NEW Ver. Quicktime 7.5.5 SANYO Xacti MPEG-4 movie file.. Audio Codec AAC, Sound Sync Bug audio and video files they are not in sync. KMPlayer MPEG-4 movie file Problem without Play.. Quicktime MPEG-4 Sound Sync Bug, Wa
-
Machine not running the correct deployment type
I have an application; Office 2013, with multiple deployment types. These deployment types each install Office with a different MUI. The requirements on the deployment types are 'Organizational Unit' must be one of xxxxx I have my final deployment t