Upgrading from sap pl35 to sap pl49

hello sap experts
I want to upgrade from sapb1 2005 pl35 to sapb1 2005 pl49 can any explain briefly how to upgrade in step by step
regards
Jenny

Jenny,
If I understand you correctly, you are talking about 2005A upgrade. However, 2005A support has been stopped back to July. Why do you not upgrade to 2007A instead?
By the way, this question should belong to System Administration forum.
Thanks,
Gordon

Similar Messages

Error while upgrading from 8.82 to SAP 9.0 PL6

Hello Expert,
    I want to upgrade my one of database from SAP 8.82 PL6 to SAP 9.0 PL 6.
   But when upgrading it give me error.
   For error plz find attachment.
   I checked the doc num and series but no one series or doc numbering are overlapping to each other.
   Plz give me sol as early as possible.
Regards,
Sandy

Hi,
Please refer SAP note and you have raise to ticket to SAP support.
1359765 - Compliance check of document number in upgrade wizard precheck
Thanks & Regards,
Nagarajan

Upgrade from SAP Webas 6.40 to SAP Netweaver 2004s

Do we have to change the virtual host name used for high availability clustering environment to local host name before we conduct the upgrade from SAP WebAS 6.40 to SAP NetWeaver 2004's ?

Do we have to change the virtual host name used for high availability clustering environment to local host name before we conduct the upgrade from SAP WebAS 6.40 to SAP NetWeaver 2004's ?

Follow up activities after SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4

Dear Friends
We have completed SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4.
We refereed the upgrade guide for follow activities and we required confirmation before performing the activities.
Could you please help us what needs to be done immediately after upgrade.
Regards,
Bharathi

Dear Nils,
Thanks for the support.
Yes, we are following the same document 'CUUC46C_to_NW701SP07' for unicode conversion after the upgrade from the note 928729.
Please suggest us in that document which are the steps should be carried out after ECC6.0 EHP4 upgrade,
1. Preparation
2. Unicode Preconversion Phase in SAP Basis 4.6C
3. Upgrade Process
4. Unicode Conversion Phase
5. Unicode Conversion Completion Phase
6. SAP Notes
Regards,
Bharathi

Issue with SAP GUI 7.30 launching with users upgrading from 7.10

We started rolling out SAP 7.30 GUI Final 7300.3.7.117 out to people, and we've ran into this error with people who had upgraded from SAP GUI 7.10.
Our environmental variable uses saplogon.ini (SAPLOGON_INI_FILE) and points to c:\windows\saplogon.ini
I don't know why the program is trying to search for saplogontree.xml.
I've tried uninstalling, rebooting, reinstalling. Deleting some of the %appdata% SAP folders.
I need some guidance as people who upgraded from GUI 7.20 do not run into this issue.

This popup would make sense Jason,as the path C:\Windows\SapLogonTree.xml would not be a valid path to this file.
Really, 7.10 should not have been used at all as an upgrade path as this had finished support in 2009
If you have a small number of users with 7.10, it's recommend to remove it via add/remove programs in the OS, then install a clean 7.30 gui.
The environment variable should not point to C:\Windows\ at all since this is a restricted folder in
Windows Vista and higher, and will only cause further trouble later on in the updates
See note http://service.sap.com/sap/support/notes/1409494
Jude

Urgent SAP upgrade from 4.0B to 4.7 Oracle 9.2.0.6

Dear support,
I have upgraded my oracle database to 8.1.7.4 with 4.0B extended kernel along with upgradation from NT 4.0 to Win 2000 is finished , and we are planning to upgrade SAP to 4.7 version.Please let me know whether i need to upgrade my database to oracle 9.2.0.6 before upgrade prepare phase ,
If yes then , do 4.0B ext kernel on Win 2000 will support oracle 9.2.0.6
I am not able to find any info on service.sap.com\PAM , because info about 4.0B
version not available.
Best Regards,
AjitR.

-> regarding 40B_EXT see sapnote 1.009.695
-> see sapnote 85.838 (section Operating System: WINDOWS FOR X86):
SAP KERNEL 4.0B_COM 32-BIT:
ORACLE 8.1.7 WINDOWS SERVER 2000/IA32 32BIT 4,5
ORACLE 9.2 WINDOWS SERVER 2000/IA32 32BIT 6,7,8
ORACLE 9.2 WINDOWS SERVER 2003/IA32 32BIT 9
SAP KERNEL 4.0B_EXT 32-BIT:
ORACLE 9.2 WINDOWS SERVER 2000/IA32 32BIT 6,7,8
ORACLE 9.2 WINDOWS SERVER 2003/IA32 32BIT 9
GreetZ, AH

Is it possible for XI 2.0 to connect to ECC 6.0 upgraded from SAP R/3 4.6?

Hi,
I just wanted to know whether it is possible for XI 2.0 to be used with ECC 6.0 which is upgraded from SAP R/3 4.6.
If yes, could you forward some links so as to know how.
Thanks,
Fariha

hi,
>>>>Is that Possible..?
yes
>>>Wont there be any additional configuration needed ?
if you use IDOCs then you don't need anything special
Regards,
michal

I upgrade from SAP R/3 470 *110 to ecc5 ,now i can't start sap dp

after i upgrade oracle9i to oracle10g ,the sap can't start ,and the status of dispatcher is stopped,
and the R3trans -d is wrong ,occure the ora-12154 error,
ERROR => OCI-call 'OCIServerAttach' failed: rc = 12154
ERROR => CONNECT failed with sql error '12154'
[ LOG BY2=>sql error 12154 performing CON [dblink#1 @ 419]
LOG BY0=>ORA-12154: TNS:could not resolve the connect identifier specified [dblink#1 @ 419]
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'C01'"
here is the error info of dev_disp:
trc file: "dev_disp", trc level: 1, release: "620"
Thu Feb 21 08:22:56 2008
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 674
intno 20020600
pid 3864
***LOG Q00=> DpSapEnvInit, DPStart (03 3864) [dpxxdisp.c 978]
 shared lib "dw_xml.dll" version 674 successfully loaded
 shared lib "dw_xtc.dll" version 674 successfully loaded
 shared lib "dw_stl.dll" version 674 successfully loaded
Thu Feb 21 08:23:01 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3212]
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm) 12784 (752)
DpShMCreate: sizeof(tm_adm) 1690816 (8412)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 034E0040, size: 1977824)
DpShMCreate: allocated sys_adm at 034E0040
DpShMCreate: allocated wp_adm at 034E0560
DpShMCreate: allocated tm_adm_list at 034E3750
DpShMCreate: allocated tm_adm at 034E3778
DpShMCreate: allocated wp_ca_adm at 03680438
DpShMCreate: allocated appc_ca_adm at 03684A88
DpShMCreate: allocated comm_adm_list at 036861F8
DpShMCreate: allocated comm_adm at 03686210
DpShMCreate: allocated ca_info at 036B5010
DpShMCreate: allocated wall_adm at 036B5018
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 1228 MB
<ES> 1227 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( ambiguous) [dpxxdisp.c 9115]
Thu Feb 21 08:23:02 2008
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Thu Feb 21 08:23:15 2008
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 941]
DpMsgAdmin: Set patchno for this platform to 674
Release check o.K.
Thu Feb 21 08:23:42 2008
ERROR => W0 (pid 2284) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W0
ERROR => W1 (pid 216) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W1
ERROR => W2 (pid 2552) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W2
ERROR => W3 (pid 2384) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W3
ERROR => W4 (pid 196) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W4
ERROR => W5 (pid 844) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W5
ERROR => W6 (pid 1852) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W6
ERROR => W7 (pid 3628) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W7
ERROR => W8 (pid 2080) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W8
ERROR => W9 (pid 3608) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W9
ERROR => W10 (pid 2120) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W10
ERROR => W11 (pid 2380) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W11
ERROR => W12 (pid 360) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W12
ERROR => W13 (pid 1596) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W13
ERROR => W14 (pid 768) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W14
ERROR => W15 (pid 2476) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W15
ERROR => W16 (pid 2524) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W16
my types changed after wp death/restart 0xbf --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
DpModState: change server state from STARTING to SHUTDOWN
Thu Feb 21 08:23:43 2008
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9341]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 3864) [dpxxdisp.c 7883]

here is the R3trans -x log file,who can help me,
4 ETW000 R3trans version 6.14 (release 700 - 10.09.07 - 09:57:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 22.02.2008 - 15:11:15
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Fri Feb 22 15:11:17 2008 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 6683 0.006683
4 ETW000 [dev trc ,00000] using "E:\usr\sap\C01\SYS\exe\run\dboraslib.dll"
4 ETW000 30 0.006713
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 15 0.006728
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 24 0.006752
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "700.08", patchlevel (0.115)
4 ETW000 142 0.006894
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 21 0.006915
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 34 0.006949
4 ETW000 [dev trc ,00000] New connection 0 created 30 0.006979
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 27 0.007006
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 20 0.007026
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 19 0.007045
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 25 0.007070
4 ETW000 [dev trc ,00000] CLIENT_ORACLE_HOME is not set as environment variable or
4 ETW000 DIR_CLIENT_ORAHOME is not set as profile parameter.
4 ETW000 assuming using instant client with unspecified location.
4 ETW000 219 0.007289
4 ETW000 [dev trc ,00000] Fri Feb 22 15:11:18 2008 32226 0.039515
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.1.0' 21 0.039536
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 15 0.039551
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.WE8DEC 2966 0.042517
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPC01's password 26 0.042543
4 ETW000 [dev trc ,00000] Connecting as /@C01 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
4 ETW000 27 0.042570
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 26 0.042596
4 ETW000 [dev trc ,00000] 0 WE8DEC 1 01DC5F00 003DF2BC 003DEB44
4 ETW000 122 0.042718
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 25 0.042743
4 ETW000 [dev trc ,00000] Allocating server context handle 22 0.042765
4 ETW000 [dev trc ,00000] Attaching to DB Server C01 (con_hdl=0,svchp=003DEA90,srvhp=01DCE214)
4 ETW000 45 0.042810
4 ETW000 [dev trc ,00000] Fri Feb 22 15:11:23 2008 5566547 5.609357
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12537
4 ETW000 28 5.609385
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12537'
4 ETW000 24 5.609409
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 12537 20 5.609429
4 ETW000 [dev trc ,00000] Try to connect with default password 17 5.609446
4 ETW000 [dev trc ,00000] Connecting as SAPC01/<pwd>@C01 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
4 ETW000 22 5.609468
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 23 5.609491
4 ETW000 [dev trc ,00000] 0 WE8DEC 1 01DC5F00 003DF2BC 003DEB44
4 ETW000 25 5.609516
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=01DCE214) 15 5.609531
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=003DEA90,srvhp=01DCE214)
4 ETW000 22 5.609553
4 ETW000 [dev trc ,00000] Deallocating server context handle 01DCE214 19 5.609572
4 ETW000 [dev trc ,00000] Allocating server context handle 20 5.609592
4 ETW000 [dev trc ,00000] Attaching to DB Server C01 (con_hdl=0,svchp=003DEA90,srvhp=01DCE214)
4 ETW000 32 5.609624
4 ETW000 [dev trc ,00000] Fri Feb 22 15:11:29 2008 5577877 11.187501
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12537
4 ETW000 29 11.187530
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12537'
4 ETW000 24 11.187554
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 12537 14 11.187568
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 12537 performing CON [dblink#5 @ 431]
4 ETW000 51 11.187619
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-12537: TNS:connection closed [dblink#5 @ 431]
4 ETW000 23 11.187642
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'C01'"

Upgrade from SAP R/3 4.6C to SAP ECC 6.0

Dear All,
Our organisation has been running SAP R/3 4.6C on Solaris 8 with Oracle 8i database. We are considering an upgrade to SAP ECC 6.0.
I have already checked the SAP Marketplace (Product Availability Matrix) and found that SAP R/3 4.6C first needs to be upgraded to mySAP ERP 2004 (SAP ECC 5.0) and then from SAP ECC 5.0 to SAP ECC 6.0.
My first question is whether I am on the right track.
Secondly, I was going through various SAP Upgrade strategies and curious to know the difference between technical upgrade and functional upgrade.
Please correct me if I am wrong - technical upgrade is when you technically upgrading the SAP ECC release from 4.6C to 5.0 (that is, upgrading Operating System, Database and ECC).
Once it has been completed, business processes (functional modules) need to be remapped. The development needs to be reworked upon (Modification Adjustment). This is what is known as functional upgrade.
I would appreciate if someone throws some light on my understanding on this subject.
Regards.
Wolfgang.

> Our organisation has been running SAP R/3 4.6C on Solaris 8 with Oracle 8i database. We are considering an upgrade to SAP ECC 6.0.
Oh.. you're aware of the fact, that Oracle 8 as well as Solaris 8 is out of support?
I would do it like (if you need/want to stay on the same hardware):
- upgrade Oracle 8 (I hope your run 8.1.7.4) to Oracle 9.2.0.8
- upgrade Solaris 8 to Solaris 10
- upgrade Oracle 9.2.0.8 to Oracle 10.2.0.4 + latest interim patches
- use kernel 46D_EX2
- upgrade the 4.6c to ERP 6.0
Be aware, that, if you plan to use Java applications (such as the Enterprise Portal or other Netweaer related appliation), the ERP 6.0 must be converted to Unicode.
Markus

Regrding upgradation from sap r/3 4.6 to ECC 6.0

Hi Friends,
We want to upgrade from 4.6C to ECC6.0 .
Pls can any one suggest me which tool i have to use .
Possible pls send me some docs on this one.
Thanks & Regards,
Ramnaresh.P

hello,
u need to post in forums SAP Solutions » SAP ERP 6.0 Upgrade .this is not the forum to post,
For the info:
For the functional and technical changes, check out the release notes for SAP ERP 6.0 and SAP NetWeaver (AS ABAP usage type) on the help portal respectively. http://help.sap.com
You can also check out the SAP ERP solution browser on the SAP ERP upgrade page. http://service.sap.com/erp-upgrade.
http://solutionbrowser.erp.sap.fmpmedia.com/
Please refer to the following links -
https://wiki.sdn.sap.com/wiki/display/HOME/ERP2005+Upgrade
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/7308da46-0d01-0010-30aa-b61527ba008c?rid=/library/uuid/9cfdd546-0d01-0010-6688-ba8ddc48edc9
http://www.id.unizh.ch/dl/sw/sap/upgrade/Master_Guide_Enh_Package_2005_1.pdf
http://www.sap.com/solutions/business-suite/erp/pdf/ERP_Upgrade_Guide.pdf
Reg,
Dhanya

Upgrade from SAP R/3 4.6 C to ECC6.0 - To find obselete and new tcodes

Hi,
We are planning upgrade from 4.6C to ECC6.0 .Is there a table in SAP which contains old and new transaction codes? or is there any easy way to find obselete transaction codes and new Tcodes.
I also want to know the new tables added and replaced tables .Any
help is appreciated.
thanks
Venkateswara Rao Yeleswaram

Hi
Try this link, which will give functionality enchancements between different versions of SAP.
http://solutionbrowser.erp.sap.fmpmedia.com/
Regards
Ramakrishna

Upgrade from Training and Events managment to SAP LSO

Hi,
We've upgraded from Training and Events management to SAP LSO 604 and during that process we have run the execute booking relationship harmonization node in IMG.
We still have references to Business event groups and Business event type in themaster data catalog instead of Course groups and Course types. Are we missing something?
Thanks,
Swathi.

Hi Swathi,
You have not missed anything, they resemble the same both in TEM & LSO so dont worry.
Go Ahead >>>>>>>>>>>>>>
Regards
Rafi

How to Upgrade from SAP NetWeaver 7.01 to NW 7.02?

Hi Experts,
I am working on GRC upgrade project,we need upgrade to GRC10.0 from GRC3.0.
GRC 10.0 only work on NW7.02,we now have NW7.01.
How to Upgrade from SAP NetWeaver 7.01 to NW 7.02?
Use EHPI tools or just spam/saint or any other way ?
current version:
SAP_ABA 701 0006 SAPKA70106
SAP_BASIS 701 0006 SAPKB70106
PI_BASIS 701 0006 SAPK-70106INPIBASIS
SAP_01 0006 BW SAPKW70106
Thanks!

HI,
Net wevaer 7.2 CE is totally different from Net weaver 7.01.
No relation i feel.kindly check the links.
http://help.sap.com/saphelp_nwce72/helpdata/en/44/d958673ef05f4de10000000a11466f/frameset.htm
http://help.sap.com/content/documentation/netweaver/index.htm
OR
You do not need Netweaver 7.2 CE for using NWBC 3.0. You just need netweaver 7.02.
You simply need to apply enhancement package 2 on your existing 7.01 system to make it 7.02.
Please refer to installation guides on service marketplace, there you can see the EHP2 installation guides.
Also, see SAP Note 900000 - Netweaver Business Client - FAQ. This will give you all the details required.
*Regards,
Ajitabh

SAP AFS Upgrade from version 5.0 to 6.4

Hi Experts,
I wanted to know if someone here was familiar with the SAP AFS upgrade from 5.0 to 6.4. I wanted to know how exactly they improved the areas listed below. (obtained from SAP Course). Your help would be greatly appreciated
http://www.sap.com/services/education/catalog/globaltabbedcourse.epx?context=%5b%5b|wdedaf||1||de|%5d%5d|
1) Improvements in the areas of planned independent requirements, seasonal concept, value add services, Combined order, productionu2013 warehouse interface
2) Production Planning Basic Data - Enhancements of AFS Bill of Material (AFS BOM), SKU Group Based Routing
3) Manufacturing Execution u2013 Collective Planned Order Conversion, Combined Order Confirmations
4) Batch Determination/Classification for SAP Apparel and Footwear
5) Handling Unit Management for AFS
Thanks,

Hi Ronny,
Thanks for the reply!
These patches you speak of, is it for the types of issues I mentioned in my first post or do they cover the entire AFS functionality? I assume it still requires complex configurations but are there a lot of complications with going from AFS 5.0 to 6.4, compared to a new AFS 6.4 implementation? Specifically with the grids, categories and BOMs?
/Cheers

MB_DOCUMENT_BADI - SAP R/3 release upgrade from 4.7.1 to ECC 6

Once finished upgrading from SAP R/3 4.7.1 to SAP ECC 6, from SPAU I see that there was no problem on the implementations of this BAdI. But when I tried the transaction, where this BAdi was implemented in, I realized that my implementations were not working. In addition, from SE19, I see that these implementations are active, so why they aren't working?
I think that there are some problem in BAdI implementations when upgrading SAP release, but I don't know how to solve my problem and turn on my implementations.
Thanks,
Luca

Hi Sunny,
i continued with the option - without ADD ON.
So, this mount point and ADD ON dvd issues are over.
In the next screen, i have to specify the xml file and place the packages under EPS/in. I have done that accordingly and now i get a new error - No matching SAINT package for 'SAP_APPL' found.
Any ideas where i have done wrong?
Thanks,
Mohan.

Upgrading from sap pl35 to sap pl49

Similar Messages

Maybe you are looking for