Upgrading from SCM 4.1 to SCM 2007/5.1 (HP-UX/MaxDB)
Here's my challenge - I need to upgrade an SCM 4.1 system (HP-UX IA64 11.23/MaxDB 7.5) to SCM2007/5.1. From what I can see in the Product Availability Matrix, SCM2007/5.1 requires MaxDB 7.7. What I need to know is how and when should the MaxDB database and liveCache be upgraded from 7.5 to 7.7 (or 7.5 > 7.6 > 7.7). I've tried to run PREPARE on the first system we wanted to test the upgrade on, but it fails with the following hard error: "ERROR: MaxDB Version is not supported by this upgrade. ERROR: Error in database software path determination (ERR -10)". This leads me to believe I need to upgrade the database before upgrade upgrading the application, yet I can't seem to find this requirement documented in any of the SCM upgrade guides.
Any assistance will be appreciated.
John
Hi Kaushik
just a little input about funtional DP (not sure of system architectural improvements) :
I dont think performance would drastically improve per se
the areas that might be of some impact/ use in terms of performance are -
- parallel processing profiles
- macro improvements
- changes in Admin Workbench (BW 7 functionality might make things easier)
- changes in Planning area (no negatives for eg can help remove macros that used to do that function making it easier)
The important improvements are in more functionality
Its recommended to do some better process and layout deisgns to get performance improvements
pl note, there would be an initial long run time the first time you perform any transaction because of indexes being created
Similar Messages
-
Collision Detection during Upgrade from CRM 4.0 to CRM 2007
We are in the process of doing an upgrade from CRM 4.0 to CRM 2007. As part of this upgrade we are following the steps detailed in the mobile upgrade guide. we are currently working on the collision
resolution issues in the mobile area. The latest issue on the UI layer is caused by changes on tiles like docactdocu2 or capsearch2 that were reverted to standard SAP.
When solving the collisions we have been working on sub objects to these tiles. When changes to theses sub objects were finished not only the collision for the sub object was solved but no collision on the parent object was shown. But the result was that the parent objects have returned to SAP standard on vital objects like custom anchors and/or custom controllers are missing on these tiles resulting in build errors. You can easily see what happened in the version tree of these objects as no merge between the changed branch and the SAP branch took place.
Returning to the tiles version from the changed branch is not possible though this function is offered in the version tree.
Why is the collision resolution functionality not working as we would expect. Why can we not chsange the tile version to the changed branch.
Has anyone else experienced these issues
Regards
EddieHi Shankar
We resolved collisions on script level like "docactdocu2onLoad" by merging or accepting the change list (SAP) version. With the collision on script level being resolved the tile the script belongs to (in this case "docactdocu2") also vanished from the collision list. The result was that the tile was reverted to the SAP version.
With the change list being released we cannot go back to the custom version of the tile except by using the version tree. But the option "Copy to Open Version" offered by a right click on the version node wanted does not work.
Any ideas
Regards
Eddie -
Upgrade from CRM 5.0 to CRM 2007
Hi,
We are planning to update from CRM 5.0 to CRM 2007. We are using CRM for Leads, Opportunities and Account & Contact Management with PCUI as front end. We do have some customized iViews for Sales People and Customers. Can any one, please provide me the step-by-step process to do technical and functional upgrade or point me towards the documentation on the same
You will rewarded with the points. Thanks in advance. Please, Its URGENT...
Cheers,
AmitAmit,
Based on your reply your work looks like the following:
1. Basis teams performs tech upgrade of your dev system
2. Security team grants temporary expanded access in dev system to access new UI and new UI tools
3. Dev/Config team takes standard delivered new UI screens and adjusts screen layouts
4. Dev/Config team adjusts any BADI's built in the previous release
The data model of CRM has not changed. If you stuck with the EEWB and used all the standard methods of enhancing the data model, you don't need to worry about data migration. However if you did not play by the SAP standards you could have more work.
As far as tracking your project you can use solution manager or build simple project tracking in MS project.
If you did no coding period, and only configuration. You should be able to complete all the configuration work in less than two weeks to get the screens as needed. However that is based on having at least one to two weeks of learning the new UI tool.
I would guess a config-only CRM implementation would only need two-three to finish all reconcilation work not including testing and training.
Take care,
Stephen -
Java Enging upgrade from CRM 5.0 to CRM 2007
Hello all,
we would like to upgrade our CRM 5.0 System to 2007 (MS SQL Server 2005, Windows 2003 X64) and now we have a problem when we want to upgrade the JAVA Engine. I've got an error in Phase READ_AND_CHECK_ADMIN_PASSWORD in Java Prepare programm. A possible reason, says the system, is that the J2EE engine is not started. I must say that we have an ABAP and Java System and there are some ABAP workprocesses in the SAP management console but I cannot see any J2EE processes under "J2EE Process Table". Is that normal? I have no idea. I worked with the system perfectly, therefore I thought that this was not a problem, but now, after this upgrade error I'm not certain any longer. In which cases do we need Java processes anyway? Can/shall I uninstall the java component if we don't need it? If yes, how?
Thanks for your help.
DianaThe upgrade process is asking for a mounting point on iSeries. Removing the Windows drive letter Y: solved the issue. The correct mounting point was /BASISDVD/.......
-
Error in GENSTATUS during upgrade from CRM 4.0 to CRM 2007
Dear experts
We have 12 errors in GENSTATUS after upgrading our CRM system from 4.0 to 2007. I don't know how to solve them - I had a look at SDN forum, OSS notes without success. Our system was previously connected to MSA but we want to turn it off part of this upgrade.
Below are the generation errors. I couldn't solve any of them:
CNBCCPSAP00070 CG GNREP E F Could not find active BDoc for TRANS_ID CNBCCPSAP00070 - Identification not possible via TransID / Name
CNBCCPSAP00070 CG LUTAB E F Could not find active BDoc for TRANS_ID CNBCCPSAP00070 - Identification not possible via TransID / Name
MSV_COUNTER CG GNREP E F Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
MSV_COUNTER CG LUTAB E F Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
0000000001CG 5ABEB7BA9F5BD3118A5F00A0C9AA8D71 PUBLI E F Database access error using table SMOG_GFUGR
F000000272CG F3CFBBF7F736D844995523584B67E937 PUBLI E F Generation error REPL_TEMPLATE_SUBCHECK
F000000273CG CDF390E3E874144F8399B0F88E37F9F2 PUBLI E F Generation error REPL_TEMPLATE_SUBCHECK
MSV_COUNTER HT GNREP E F Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
MSV_COUNTER HT LUTAB E F Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
0000000034HT B49F577F7D5BD3118A5F00A0C9AA8D71 PUBLI E F Generation error REPL_TEMPLATE_SUBCHECK_IL2
F000000273HT 42411AD9608668DAE10000000A1552B6 PUBLI E F Generation error REPL_TEMPLATE_SUBCHECK
F000000272HT 42411ADC608668DAE10000000A1552B6 PUBLI E F Generation error REPL_TEMPLATE_SUBCHECK
Thanks a lot in advance for your help
Best regards
StephanieHi Stephanie
Did you find a resultion to your genstatus issue.
We are in a similar issue currently - we have the following errors
CNBCCPSAP00070 CG
CNBCCPSAP00070 CG
DOC_HEADER CG
S000000290CG 98FBC48FBE4A0040888E14E1C27C7262
CAMPAIGN_WRITE CG
Look forward to your response on this
Regards
Eddie -
Upgrade from CRM 5.0 to CRM 2007 dublestack
Hi Group.
Running JPREPARE for the java stack we get stucked in the step where mounting points are requested ( EXTRACT_ROMS ). The JPREPARE cannot find the correct label or index.
In the step EXTRACT_ROMS the JPREPARE askes for the mount point of the following DVD Type:
CRM60_Java 'CRM 6.0 Java DVD'
DVD_KERNEL 'SAP Kernel 700'
NW_Java 'NW Java Content DVD
We copied the DVD's to our iSeries and try to extract from there in a pathes like this:
Y:\BASISDVD\SAPNW04s_SR3\CRM2007\D51033093_CRMJava
Y:\BASISDVD\SAPNW04s_SR3\CRM2007\D51033260_KRN
Y:\BASISDVD\SAPNW04s_SR3\CRM2007\D51033265_NWJava
Labels ( LABEL.ASC) are the following:
SAP:JAVA-DVD1:CRM60:SAP CRM 2007 Java DVD:*:D51033093
SAP:AKK:700:DVD_KERNEL:SAP Kernel 700:D51033260
SAP:JAVA-DVD:700SR2:content:*:D51033265
Since the step checks one by one we initially only specified the kernel DVD, since we know that it is working on iSeries side when running PREPARE for the ABAP stack.
Does anyone know what labels are expected???
We also tried to mount the DVD's in the PC running the SDTgui, without any success.
Best regards,
Teddy
ECCO Sko A/S
Edited by: Teddy L. Andersen on Jun 6, 2008 2:28 PM
The upgrade process is asking for a mounting point on iSeris. Removing the Windows drive letter Y: solved the issue. The correct mounting point was \BASISDVD\.......The upgrade process is asking for a mounting point on iSeries. Removing the Windows drive letter Y: solved the issue. The correct mounting point was /BASISDVD/.......
-
Upgrading from SBS 2008 and Exchange Server 2007 and Adding Modest Failover Protection
I haven't seen anyone describe this scenario, so maybe it can't be done, but it seems it should work. Can someone either confirm this is viable or set me straight and tell me it's not wise (and if not, why not).
I currently have SBS 2008 (2008 Server + Exchange Server 2007 + some other components). I use redirected folders so all my user data is stored primarily on the server, and then sync'd with their local harddrives for roaming use and as an additional
backup precaution. I want to upgrade to a modern version of Exchange (don't care too much about the underlying server OS, but seems like a good time to upgrade everything). I also want to improve the reliability for rapid recovery in the event of a system
failure. I have always felt nervous with SBS because it only runs on a single server.
My plan is:
Install Windows Server 2012 Standard on a new server machine
Join that new server to the existing SBS domain and sync the users, etc.
Install Exchange Server 2013 on the new 2012 Server
Migrate the existing Exchange data and account info to the new server
Demote the SBS Server and promote the new server to primary DC
Reformat the old SBS server and install Windows Server 2012 on it too, and join it to the domain as a second DC
Set up DFS Replication and keep all my user data folders between the two servers (so if one server fails, the other can take over, just not automatically like with a cluster)
Install Exchange Server 2013 on the reformatted 2012 Server box (so second instance on the domain) and set it up to sync with the first Exchange Server 2013 via DAG (so if either computer crashes, the other can take over for both Exchange Server and file
services)
Wouldn't that give me a complete slow-response failover system without the need for setting up a cluster (I know a cluster would provide instant failover protection, but I don't need that kind of speed - a manual switchover in the rare event of a server
failure is acceptable for us)? I could do this using cheap hardware for each server, because unless both servers fail at the same time, clients can point to the other server. And because it's not a formal cluster, I don't need to buy anything for a shared
SAN. This seems like such an obvious more cost-effective solution for a small network, I don't understand why this isn't a common approach, which makes me wonder if there is some reason it won't work.
Any suggestions or feedback? Are Redirected Folders still recommended for users on a Server 2012-based domain?
Thanks,
Colin
ColinEd, thanks again for your help. OK, so here's my updated plan (I realize I should probably check on some of these pieces on the Server group, instead of this Exchange group).
Constraints/objectives:
None of the machines are truly server grade hardware, but only 5 people on the network, so performance is generally not an issue, unless a given server is just pegged on CPU or HD due to its own internal maintenance tasks and can't respond to user requests.
Haven't seen any problems, since upgrading server from 4GB RAM to 8GB a few years ago.
Not going to buy any new hardware at this time, but do have several unused consumer-grade computers I can deploy as wimpy or moderate servers.
Main issue is to limit repair time in the event of a system failure (instant failover is not required, but want to be able to restore network functions within less than 24 hours in the event of a hardware failure) and minimize time spent on IT
maintenance.
Because of light IT maintenance (not anyone's primary job and we're too small to justify a dedicated IT person or to pay for outside help), almost every touch takes me research and time to re-learn what I haven't done in weeks, months, or years -- so also
want to keep all IT tasks as simple as possible.
We philosophically want to invest now for the next 5 years and avoid ongoing cloud fees (so zero interest in Windows Server Essentials with Exchange Online)
A little nervous about using VM's, just because I never have before, but I do respect that's probably the right way to do many of these things...
Currently I have SBS 2008 (Windows Server 2008 R2, Exchange Server 2007, WSUS 3, all with latest SP's, also includes SharePoint and other stuff, but I don't really care about most of it) on a single 8GB consumer grade system, which functions as a file
server and Exchange server. We use Redirected Folders and Offline files for all users, which works great for us and provides additional file redundancy (if server goes down, all of each user's files are also on their own machine and they can even continue
to work just fine w/o the server, losing only ability to send and receive e-mail). It has been sufficient, but I want to upgrade our version of Exchange and I am nervous that if that current one server fails, it would take me a long time to restore everything
from backup, easily many days, especially if I need to buy any replacement hardware. It is RAID1, so a single drive failure is easy to handle, but that's the only hardware redundancy for the current server.
New Plan:
Install Windows Server 2012 R2 Standard on a new modest machine (16GBR RAM, Core i7, 1TB RAID1 (may upgrade to 3 or 4 TB), 256 GB SSD boot drive, this had been my old personal computer)
Join that new server to the existing SBS domain (2008 R2/Exchange 2007), make it a DC, sync the users, etc.
Install Windows Server 2012 R2 Standard on a wimpy computer (4GB RAM Core i3 processor), leave it as a member server
Install Exchange Server 2013 on the wimpy new 2012 R2 Server (and nothing else, this will be dedicated to Exchange to make the most of such a wimpy machine)
Migrate the existing Exchange data from the old SBS Exchange 2007 server and account info to the new server
(or should I just create new accounts and copy the data from the user end through Outlook -- is that safer and cleaner than attempting any kind of server-level Exchange data migration?)
Demote the old SBS Server and promote the new 16GB server to primary DC. Now it's OK to take the old SBS server off the network.
Reformat the old SBS server and install Windows Server 2012 R2 on it too, and join it to the domain as a second DC (and possibly DCPROMO it to be the main server)
Install Exchange Server 2013 in a VM on the reformatted 2012 R2 Server box (so second instance on the domain for Exchange redundancy) and set it up to sync with the first Exchange Server 2013 via DAG OR set up another physical wimpy member server and install
it there. In any case, do NOT install Exchange directly on either DC.
Set up DFS Replication or a Failover Cluster (still need to research this, but I had planned on DFS, thinking Cluster required shared drive, but Ed corrected me on this) between the two DC's for redirected files and keep all my user data folders between
the two servers. We don't need automatic failover, like with a cluster, a manual switch would be acceptable, but if no additional cost or risk to clustering the two DC's, then the auto-failover protection that provides would be better than DFS.
I think this incorporates all of your points, Ed. Does this sound right now? What's your advice on #5 (how to best migrate user data)?
Thanks so much for all your help,
Colin -
JAVA Upgrade from CRM 5.0 to CRM 2007
Hi,
I need help. I'm trying to upgrade our CRM 5.0 to CMR2007 and encountered a problem during the JAVA Prepare Phase.
Here is the error I received.
The execution of ended in error.
Could not load class com.sap.sdt.j2ee.phases.PhaseTypeDetermineSystemId.
com.sap.sdt.util.misc.LoaderException: Class com.sap.sdt.j2ee.phases.PhaseTypeDetermineSystemId not found using classpath.
com.sap.sdt.ucp.pce.ctrl.PhaseLoaderException
Could not load class com.sap.sdt.j2ee.phases.PhaseTypeDetermineSystemId.
DETERMINE_SIDS
INIT
PREPARE
NetWeaver Upgrade
SAPJup
Java Upgrade
Thanks,Hi Ramon,
In subdirectory trc you should find a file SAPJup.TRC containing some more details on the exception that happened. Add the stack if you find it there.
PhaseTypeDetermineSystemId is the first phase class to be loaded from package lib/sdt_j2ee.jar. So, you should check if this jar is around.
Regards,
Thomas -
Upgrade from SCM 5.1 to SCM 7.0 SR1 (with NW 7.0 EHP1 SR1)
Hi folks,
we are trying to upgrade our SCM5.1 to SCM 7.0 SR1. There seems to be a problem in the phase, where SAPup is trying to detect the needed CDs / DVDs. SAPup recognizes that "FRP" is used within the system. There appears a dialog to enter the mount points for the DVDs required for the upgrade.
It says <<Enter at least the mount point for the DVD titled "FRP Software DVD">>. All other needed media is accepted, but not the DVD with the FRP-Software.
SAP Note "1300960" explains, that as of SAP Business Suite 2008 onward, no media without a MID.XML file will be accepted for upgrades (e.g. media containing Add-Ons).
I have opended a message to SAP Support, but there is no solution / workaround until now. I cannot skip the phase and therefore it is not possible to launch / continue the entire upgrade.
SAPup Version is "7.10/7, build 31.010 for UNICODE"
Has anyone faced the same problem with no-MID.XML based media?
Thank you for any advice!
Kind regards,
Marcel JentschHi,
We just upgraded from SCM 5.0 to 7.0 sp9.
You need not deactivate the DP planning areas before upgrade.
We did not face any issues because of this.
Regards,
Ashok -
Dear all,
I am in the situation to present the deltas between SCM 5.0 and 7.0. As we are running on 5.0 right now and would like to upgrade to 7.0 I need some input about the benefits for the upgrade. Clear is that 5.0 is running into extended support end of this month, but the question is which Deltas we have. May be someone could me help out here. We are currentls working with SAM-DP and SNP.
Thanks to help me a little bit out here.
BR
IngoHi,
We just upgraded from SCM 5.0 to 7.0 sp9.
You need not deactivate the DP planning areas before upgrade.
We did not face any issues because of this.
Regards,
Ashok -
SCM Upgrade from 5.0 to 5.1 or 7.0
Hi, We are contemplating to upgrading from SCM 5.0 to 5.1 or 7.0. Any advice that we need to consider to eliminate serious problem. Also, any issue with interfacing with ECC5 and BI 7? Thanks for your reply.
Hello Nida,
For restrictions on both SCM releases (5.1 and 7.0) please check the content of notes 1021662 and
1284461.
I hope it helps.
Regards,
Michel Bohn -
Upgrade from SCM 5.0 to SCM 7.0 without Java Stack
Hello,
My query is we have a SCM 5.0 system which has a java stack in it. But now we are going to upgrade it to SCM 7.0. - Is SCM 7.0 has a java stack ?
If it doesn't have , can we upgrade SCM 5.0 to SCM 7.0 without Java Stack ? Is it posssible to upgrade without Java Stack or not ?
Is it possible that we can convert Java Stuff into ABAP web dyn pro ? If yes , how shall we can achieve it ? If not, how shall we proceed in an alternate way ?
Thanks for your help in advance.
MadhuHi Manoj,
Yes the system is running okay and I can login without problem. The question I have is that the upgrade program started with default system number 00 loaded, where I don't know how to change it to match our system setting. Our system is currently having system number 01.
Thanks,
Eric -
Hi Microsoft,
Since we have upgraded from Exchange 2007 to 2013 users complain their conversations in Outlook are no longer grouped based on the subject of an e-mail. I looks like Outlook uses other message properties for grouping e-mails in a conversation.
I have investigated all the forum topics and see that with exchange 2010 there is support added for the use of conversation-ID's. However the functionality to automatically group e-mails with the same subject in one conversation in Outlook is gone!
I would like to know if there is a fix to implement so that some our users get this functionality back. For Example: Let the exchange server not generate conversation-ID's and message-ID's for certain users.
Your help is greatly appreciated!Totally correct!
If you don't plan to maintain Outlook then you plan to fail :(
Additional links etc are in here:
http://blogs.technet.com/b/rmilne/archive/2013/07/18/patching-exchange-don-t-overlook-outlook.aspx
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter: LinkedIn:
Facebook:
XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
We have had Verizon Wireless service since 2007. We have 6 lines on our account. Unfortunately in 2012 when I (903.647.0073) upgraded from the iPhone4s to the iPhone 5 I started having reception problems. I started having dropped calls in my home. I had to go outside to get reception without dropped calls. I was told that because of metal in my home I would have to purchase a Network Extender for $250. And we HAVE not metal in our home. AND our other lines all work fine. I felt this was ridiculous. We already pay $350+/month for service and I should NOT have to purchase additional equipment for a service that I already pay for. The manager of our local store at the time gave us at no cost a Samsung Network Extender. It worked beautifully until about a month ago. I went to our local Verizon store and was told that I would have to purchase an extender. THIS is RIDICULOUS. We have been loyal customers for over 7 years and have been very satisfied with our service. Unless this issue can be resolved without purchasing an extender we will be switching our service as our lines come up for renewal. I regret this as we have been very happy with our service. But we should NOT have to purchase anything extra for one line that will not get good reception. Again, we pay $350+/ month for a service that does not work properly, simply RIDICULOUS! Currently the "sys" light flashes red (slow) and the GPS light remains red. Please help this very frustrated customer.
Regardless with what carrier your with you might have the same issue, My recommendation would be to get a router that will help you with viewing live traffic and keep a tally of your usage and any device connected to your internet connection. You can go with the peplink balance 20 and be able to look at your traffic by the hour, daily, weekly, monthly or yearly. Look for trends, see what computers or devices are doing what I attached a screen shot so you can see an example of mine. You can purchase the router at 3gstore
http://i45.tinypic.com/6zc674.jpg -
Upgrading from Exchange 2007 SP2 to SP3 stops and fails with Performance Counter
We are upgrading from Exchange 2007 SP2 to SP3.
Exchange Server is on Windows 2008 Enterprise 64 bit OS -SP2
DC is on windows 2008 Enterprise 32 bit OS - SP2
When we run Exchange SP3 setup.exe GUI, it runs through the pre-requisites completely and then starts to configure the Hub Transport services but @ exactly 55% it throws an error window "Exchange Server Setup encountered an error"
On repeating this process i noticed it throws the same error at 55% while "Performance COunter Configuring". Please find below the entries of exchangesetup.log
[2/1/2015 1:09:30 PM] [0] **********************************************
[2/1/2015 1:09:30 PM] [0] Starting Microsoft Exchange 2007 Setup
[2/1/2015 1:09:30 PM] [0] **********************************************
[2/1/2015 1:09:30 PM] [0] Operating System version: Microsoft Windows NT 6.0.6002 Service Pack 2.
[2/1/2015 1:09:30 PM] [0] Setup version: 8.3.83.6.
[2/1/2015 1:09:30 PM] [0] Logged on user: chakfig\Administrator.
[2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='mode', Value='Upgrade'.
[2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='sourcedir', Value='J:\EXSP01\SP3'.
[2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
[2/1/2015 1:09:30 PM] [0] ExSetupUI was started with the following command: '-mode:upgrade -sourcedir:J:\EXSP01\SP3 /FromSetup'.
[2/1/2015 1:09:30 PM] [0] Setup is choosing the domain controller to use
[2/1/2015 1:09:31 PM] [0] Setup is choosing a local domain controller...
[2/1/2015 1:09:35 PM] [0] Setup has chosen the local domain controller PGCDC.chakfig.local for initial queries
[2/1/2015 1:09:35 PM] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use PGCDC.chakfig.local
[2/1/2015 1:09:35 PM] [0] Setup is choosing a global catalog...
[2/1/2015 1:09:35 PM] [0] Setup has chosen the global catalog server PGCDC.chakfig.local.
[2/1/2015 1:09:35 PM] [0] Setup will use the domain controller 'PGCDC.chakfig.local'.
[2/1/2015 1:09:35 PM] [0] Setup will use the global catalog 'PGCDC.chakfig.local'.
[2/1/2015 1:09:35 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 1:09:35 PM] [0] Exchange organization container for the organization is 'CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 1:09:35 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PGCVMEXG'.
[2/1/2015 1:09:35 PM] [0] Exchange Server object found : 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 1:09:35 PM] [0] The following roles are unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[2/1/2015 1:09:35 PM] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[2/1/2015 1:09:35 PM] [0] The local server has some Exchange files installed.
[2/1/2015 1:09:35 PM] [0] Setup will use the path 'J:\EXSP01\SP3' for installing Exchange.
[2/1/2015 1:09:35 PM] [0] Setup will discover the installed roles from server object 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 1:09:35 PM] [0] 'BridgeheadRole' is installed on the server object.
[2/1/2015 1:09:35 PM] [0] 'ClientAccessRole' is installed on the server object.
[2/1/2015 1:09:35 PM] [0] 'MailboxRole' is installed on the server object.
[2/1/2015 1:09:35 PM] [0] The server is cluster type: 'None'.
[2/1/2015 1:09:35 PM] [0] The requested cluster type: 'None'.
[2/1/2015 1:09:35 PM] [0] The installation mode is set to: 'BuildToBuildUpgrade'.
[2/1/2015 1:09:35 PM] [0] An Exchange organization with name 'chakfig' was found in this forest.
[2/1/2015 1:09:35 PM] [0] Active Directory Initialization status : 'True'.
[2/1/2015 1:09:35 PM] [0] Schema Update Required Status : 'False'.
[2/1/2015 1:09:35 PM] [0] Organization Configuration Update Required Status : 'False'.
[2/1/2015 1:09:35 PM] [0] Domain Configuration Update Required Status : 'False'.
[2/1/2015 1:09:35 PM] [0] The locally installed version is 8.3.83.6.
[2/1/2015 1:09:35 PM] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server'.
[2/1/2015 1:09:35 PM] [0] The backup copy of the install path is 'C:\Program Files\Microsoft\Exchange Server'.
[2/1/2015 1:09:35 PM] [0] The backup copy of the previously installed version is '8.2.176.2'.
[2/1/2015 1:09:36 PM] [0] Setup is determining what organization-level operations to perform.
[2/1/2015 1:09:36 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
[2/1/2015 1:09:36 PM] [0] The installed .msi file is current for this version of setup.
[2/1/2015 1:09:36 PM] [0] RootDataHandler has 1 DataHandlers
[2/1/2015 1:12:38 PM] [0] End of Setup
[2/1/2015 1:12:38 PM] [0] **********************************************
[2/1/2015 2:17:36 PM] [0] **********************************************
[2/1/2015 2:17:36 PM] [0] Starting Microsoft Exchange 2007 Setup
[2/1/2015 2:17:36 PM] [0] **********************************************
[2/1/2015 2:17:36 PM] [0] Operating System version: Microsoft Windows NT 6.0.6002 Service Pack 2.
[2/1/2015 2:17:36 PM] [0] Setup version: 8.3.83.6.
[2/1/2015 2:17:36 PM] [0] Logged on user: chakfig\Administrator.
[2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='mode', Value='Upgrade'.
[2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='sourcedir', Value='J:\EXSP01\SP3'.
[2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
[2/1/2015 2:17:37 PM] [0] ExSetupUI was started with the following command: '-mode:upgrade -sourcedir:J:\EXSP01\SP3 /FromSetup'.
[2/1/2015 2:17:41 PM] [0] Setup is choosing the domain controller to use
[2/1/2015 2:17:41 PM] [0] Setup is choosing a local domain controller...
[2/1/2015 2:17:43 PM] [0] Setup has chosen the local domain controller PGCDC.chakfig.local for initial queries
[2/1/2015 2:17:43 PM] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use PGCDC.chakfig.local
[2/1/2015 2:17:43 PM] [0] Setup is choosing a global catalog...
[2/1/2015 2:17:43 PM] [0] Setup has chosen the global catalog server PGCDC.chakfig.local.
[2/1/2015 2:17:43 PM] [0] Setup will use the domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:17:43 PM] [0] Setup will use the global catalog 'PGCDC.chakfig.local'.
[2/1/2015 2:17:43 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 2:17:43 PM] [0] Exchange organization container for the organization is 'CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 2:17:43 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PGCVMEXG'.
[2/1/2015 2:17:43 PM] [0] Exchange Server object found : 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 2:17:43 PM] [0] The following roles are unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[2/1/2015 2:17:43 PM] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[2/1/2015 2:17:43 PM] [0] The local server has some Exchange files installed.
[2/1/2015 2:17:43 PM] [0] Setup will use the path 'J:\EXSP01\SP3' for installing Exchange.
[2/1/2015 2:17:43 PM] [0] Setup will discover the installed roles from server object 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
[2/1/2015 2:17:43 PM] [0] 'BridgeheadRole' is installed on the server object.
[2/1/2015 2:17:43 PM] [0] 'ClientAccessRole' is installed on the server object.
[2/1/2015 2:17:43 PM] [0] 'MailboxRole' is installed on the server object.
[2/1/2015 2:17:43 PM] [0] The server is cluster type: 'None'.
[2/1/2015 2:17:43 PM] [0] The requested cluster type: 'None'.
[2/1/2015 2:17:43 PM] [0] The installation mode is set to: 'BuildToBuildUpgrade'.
[2/1/2015 2:17:43 PM] [0] An Exchange organization with name 'chakfig' was found in this forest.
[2/1/2015 2:17:43 PM] [0] Active Directory Initialization status : 'True'.
[2/1/2015 2:17:43 PM] [0] Schema Update Required Status : 'False'.
[2/1/2015 2:17:43 PM] [0] Organization Configuration Update Required Status : 'False'.
[2/1/2015 2:17:43 PM] [0] Domain Configuration Update Required Status : 'False'.
[2/1/2015 2:17:43 PM] [0] The locally installed version is 8.3.83.6.
[2/1/2015 2:17:43 PM] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server'.
[2/1/2015 2:17:43 PM] [0] The backup copy of the install path is 'C:\Program Files\Microsoft\Exchange Server'.
[2/1/2015 2:17:43 PM] [0] The backup copy of the previously installed version is '8.2.176.2'.
[2/1/2015 2:17:43 PM] [0] Setup is determining what organization-level operations to perform.
[2/1/2015 2:17:43 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
[2/1/2015 2:17:43 PM] [0] The installed .msi file is current for this version of setup.
[2/1/2015 2:17:43 PM] [0] RootDataHandler has 1 DataHandlers
[2/1/2015 2:17:47 PM] [0] Validating options for the 4 requested roles
[2/1/2015 2:17:47 PM] [0] UpgradeModeDataHandler has 5 handlers and 5 work units
[2/1/2015 2:17:52 PM] [0] Validating options for the 4 requested roles
[2/1/2015 2:17:52 PM] [0] UpgradeModeDataHandler has 5 handlers and 5 work units
[2/1/2015 2:17:53 PM] [0] **************
[2/1/2015 2:17:53 PM] [0] Setup will run the task 'test-setuphealth'
[2/1/2015 2:17:53 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $true -ExchangeVersion '8.3.83.6' -Roles 'Bridgehead' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
-TargetDir 'C:\Program Files\Microsoft\Exchange Server''
[2/1/2015 2:17:53 PM] [1] Beginning processing.
[2/1/2015 2:18:19 PM] [1] Beginning processing.
[2/1/2015 2:18:19 PM] [1] Administrator Active Directory session settings are: View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
[2/1/2015 2:18:19 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
[2/1/2015 2:18:19 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:18:19 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:18:19 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
[2/1/2015 2:18:20 PM] [1] Ending processing.
[2/1/2015 2:18:20 PM] [1] Beginning processing.
[2/1/2015 2:18:20 PM] [1] Administrator Active Directory session settings are: View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
[2/1/2015 2:18:20 PM] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
[2/1/2015 2:18:20 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:18:20 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
[2/1/2015 2:18:20 PM] [1] Ending processing.
[2/1/2015 2:18:20 PM] [1] Ending processing.
[2/1/2015 2:18:20 PM] [0] **************
[2/1/2015 2:18:20 PM] [0] Setup will run the task 'test-setuphealth'
[2/1/2015 2:18:20 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'ClientAccess' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
-TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'
[2/1/2015 2:18:20 PM] [1] Beginning processing.
[2/1/2015 2:18:26 PM] [1] Beginning processing.
[2/1/2015 2:18:26 PM] [1] Administrator Active Directory session settings are: View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
[2/1/2015 2:18:55 PM] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
[2/1/2015 2:18:55 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:18:55 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
[2/1/2015 2:18:55 PM] [1] Ending processing.
[2/1/2015 2:18:55 PM] [1] Ending processing.
[2/1/2015 2:18:55 PM] [0] **************
[2/1/2015 2:18:55 PM] [0] Setup will run the task 'test-setuphealth'
[2/1/2015 2:18:55 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'ClientAccess' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
-TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'
[2/1/2015 2:18:55 PM] [1] Beginning processing.
[2/1/2015 2:19:01 PM] [1] Beginning processing.
[2/1/2015 2:19:01 PM] [1] Administrator Active Directory session settings are: View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
[2/1/2015 2:19:01 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
[2/1/2015 2:19:01 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:19:01 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:19:01 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
[2/1/2015 2:19:01 PM] [1] Ending processing.
[2/1/2015 2:19:01 PM] [1] Ending processing.
[2/1/2015 2:19:01 PM] [0] **************
[2/1/2015 2:19:01 PM] [0] Setup will run the task 'test-setuphealth'
[2/1/2015 2:19:01 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'Mailbox' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
-TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'
[2/1/2015 2:19:01 PM] [1] Beginning processing.
[2/1/2015 2:19:04 PM] [1] Beginning processing.
[2/1/2015 2:19:04 PM] [1] Ending processing.
[2/1/2015 2:19:07 PM] [1] Beginning processing.
[2/1/2015 2:19:07 PM] [1] Administrator Active Directory session settings are: View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
[2/1/2015 2:19:07 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
[2/1/2015 2:19:07 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:19:07 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
[2/1/2015 2:19:07 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
[2/1/2015 2:19:07 PM] [1] Ending processing.
[2/1/2015 2:19:08 PM] [1] Ending processing.
[2/1/2015 2:19:20 PM] [0] Setup is determining what organization-level operations to perform.
[2/1/2015 2:19:20 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
[2/1/2015 2:19:20 PM] [0] The installed .msi file is current for this version of setup.
[2/1/2015 2:19:20 PM] [0] RootDataHandler has 1 DataHandlers
[2/1/2015 2:19:20 PM] [0] **************
[2/1/2015 2:19:20 PM] [0] Setup will run the task 'Install-BridgeheadRole'
[2/1/2015 2:19:20 PM] [1] Setup launched task 'Install-BridgeheadRole -DomainController 'PGCDC.chakfig.local' -UpdatesDir 'J:\EXSP01\SP3\Updates''
[2/1/2015 2:19:20 PM] [1] Beginning processing.
[2/1/2015 2:19:20 PM] [1] Attempting Install for BridgeheadRole.
[2/1/2015 2:19:20 PM] [1] The following roles are current:
[2/1/2015 2:19:26 PM] [1] Reading components for role 'BridgeheadRole' from 'res://BridgeheadRoleDefinition.xml'
[2/1/2015 2:19:26 PM] [1] Found 22 components
[2/1/2015 2:19:26 PM] [1] Loaded component 'All Roles Common First - Run Once' with 10 task info blocks from 'res://AllRolesCommonFirst_RunOnce.xml'
[2/1/2015 2:19:26 PM] [1] Loaded component 'All Roles Common First' with 8 task info blocks from 'res://AllRolesCommonFirst.xml'
[2/1/2015 2:19:27 PM] [1] Loaded component 'All Roles Precompile Management Binaries' with 30 task info blocks from 'res://AllRolesPrecompileManagementBinaries.xml'
[2/1/2015 2:19:27 PM] [1] Loaded component 'Bridgehead Permissions Configuration' with 1 task info blocks from 'res://BridgeheadLocalPermissionsComponent.xml'
[2/1/2015 2:19:27 PM] [1] Loaded component 'Common Perf Counters ' with 2 task info blocks from 'res://CommonPerfCountersComponent.xml'
[2/1/2015 2:19:27 PM] [1] Loaded component 'Provision Server' with 9 task info blocks from 'res://ProvisionServerComponent.xml'
[2/1/2015 2:19:28 PM] [1] Loaded component 'All Active-Directory Roles Common' with 14 task info blocks from 'res://AllADRolesCommon.xml'
[2/1/2015 2:19:28 PM] [1] Loaded component 'Exchange 2003 Pseudo-MTA Configuration' with 1 task info blocks from 'res://LegacyMTAComponent.xml'
[2/1/2015 2:19:28 PM] [1] Loaded component 'Exchange 2003 SMTP VSI Configuration' with 1 task info blocks from 'res://LegacySMTPComponent.xml'
[2/1/2015 2:19:29 PM] [1] Loaded component 'Transport Perf Counters' with 21 task info blocks from 'res://TransportPerfCountersComponent.xml'
[2/1/2015 2:19:29 PM] [1] Loaded component 'Enable RPC-EPMAP firewall exception' with 1 task info blocks from 'res://RpcEpmapFirewallException.xml'
[2/1/2015 2:19:29 PM] [1] Loaded component 'Bridgehead Role Setter' with 1 task info blocks from 'res://BridgeheadRoleSetterComponent.xml'
[2/1/2015 2:19:29 PM] [1] Loaded component 'Transport Common Configuration' with 22 task info blocks from 'res://TransportCommonComponent.xml'
[2/1/2015 2:19:30 PM] [1] Loaded component 'Bridgehead Perf Counters' with 8 task info blocks from 'res://BridgeheadPerfCountersComponent.xml'
[2/1/2015 2:19:30 PM] [1] Loaded component 'Bridgehead Configuration' with 18 task info blocks from 'res://BridgeheadComponent.xml'
[2/1/2015 2:19:30 PM] [1] Loaded component 'Transport Log Search Service' with 1 task info blocks from 'res://TransportLogSearchServiceComponent.xml'
[2/1/2015 2:19:31 PM] [1] Loaded component 'Data Storage Configuration' with 1 task info blocks from 'res://DataStorageComponent.xml'
[2/1/2015 2:19:31 PM] [1] Loaded component 'Monitoring Service Configuration' with 5 task info blocks from 'res://MonitoringComponent.xml'
[2/1/2015 2:19:31 PM] [1] Loaded component 'Active Directory Topology Service Configuration' with 2 task info blocks from 'res://AllADRolesCommonServiceControl.xml'
[2/1/2015 2:19:31 PM] [1] Loaded component 'Bridgehead Service Configuration' with 3 task info blocks from 'res://BridgeheadServiceControl.xml'
[2/1/2015 2:19:32 PM] [1] Loaded component 'Transport Common Service Control' with 1 task info blocks from 'res://TransportCommonServiceControl.xml'
[2/1/2015 2:19:32 PM] [1] Loaded component 'All Roles Common Last' with 4 task info blocks from 'res://AllRolesCommonLast.xml'
[2/1/2015 2:19:32 PM] [1] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
[2/1/2015 2:19:32 PM] [1] Writing informational script to 'C:\ExchangeSetupLogs\Install-BridgeheadRole-20150201-1419320497.ps1'
[2/1/2015 2:19:32 PM] [1] Executing '$RoleIsClusterNode = $False', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClusterNode = $False'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleRoles = "BridgeheadRole,ClientAccessRole,MailboxRole,AdminToolsRole"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleRoles = "BridgeheadRole,ClientAccessRole,MailboxRole,AdminToolsRole"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleIsAdminToolsRoleInstalled = $True', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsAdminToolsRoleInstalled = $True'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleNetBIOSName = "pgcvmexg"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleNetBIOSName = "pgcvmexg"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleInvocationID = "20150201-1419320497"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInvocationID = "20150201-1419320497"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleInstallPath = "C:\Program Files\Microsoft\Exchange Server\"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInstallPath = "C:\Program Files\Microsoft\Exchange Server\"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleStartTransportService = $True', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleStartTransportService = $True'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleLoggedOnUser = "chakfig\Administrator"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggedOnUser = "chakfig\Administrator"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleInstallationMode = "BuildToBuildUpgrade"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInstallationMode = "BuildToBuildUpgrade"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RolePreviousVersion = "8.2.176.2"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RolePreviousVersion = "8.2.176.2"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleIsMailboxRoleInstalled = $True', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsMailboxRoleInstalled = $True'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleBinPath = "C:\Program Files\Microsoft\Exchange Server\Bin"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleBinPath = "C:\Program Files\Microsoft\Exchange Server\Bin"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleSetupLoggingPath = "C:\ExchangeSetupLogs"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleSetupLoggingPath = "C:\ExchangeSetupLogs"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleFqdnOrName = "pgcvmexg"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleFqdnOrName = "pgcvmexg"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleTargetVersion = "8.3.83.6"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleTargetVersion = "8.3.83.6"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleUpdatesDir = "J:\EXSP01\SP3\Updates"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleUpdatesDir = "J:\EXSP01\SP3\Updates"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleIsClientAccessRoleInstalled = $True', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClientAccessRoleInstalled = $True'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleRoleName = "BridgeheadRole"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleRoleName = "BridgeheadRole"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleDomainController = "PGCDC.chakfig.local"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleDomainController = "PGCDC.chakfig.local"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleProductPlatform = "amd64"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleProductPlatform = "amd64"'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleIsBridgeheadRoleInstalled = $True', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsBridgeheadRoleInstalled = $True'.
[2/1/2015 2:19:32 PM] [1] Executing '$RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"'.
[2/1/2015 2:19:32 PM] [1] Found 136 tasks to execute
[2/1/2015 2:19:32 PM] [1] Processing component 'All Roles Common First - Run Once' (Configuring the server.).
[2/1/2015 2:19:32 PM] [1] Executing 'if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName = 'Installdw20shared.msilog';
} install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
LOGVERBOSE=1");', handleError = False
[2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName
= 'Installdw20shared.msilog'; } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
LOGVERBOSE=1");'.
[2/1/2015 2:19:32 PM] [2] Beginning processing.
[2/1/2015 2:19:33 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
[2/1/2015 2:19:33 PM] [2] PackagePath was set to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'; normalizing to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
[2/1/2015 2:19:33 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
[2/1/2015 2:19:33 PM] [2] Installing MSI package 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007.xml, Xml Node Name = _locDefinition
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge.xml, Xml Node Name = _locDefinition
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007_WinSrv2008.xml, Xml Node Name = _locDefinition
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError
= False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge_WinSrv2008.xml, Xml Node Name = _locDefinition
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:34 PM] [1] Executing 'Set-WERRegistryMarkers;', handleError = False
[2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-WERRegistryMarkers;'.
[2/1/2015 2:19:34 PM] [2] Beginning processing.
[2/1/2015 2:19:34 PM] [2] Ending processing.
[2/1/2015 2:19:35 PM] [1] Processing component 'All Roles Common First' (Creating the Exchange server configuration in the Active Directory).
[2/1/2015 2:19:35 PM] [1] Executing '$RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames', handleError = False
[2/1/2015 2:19:35 PM] [2] Launching sub-task '$error.Clear(); $RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames'.
[2/1/2015 2:19:35 PM] [1] Executing 'Set-LocalPermissions', handleError = False
[2/1/2015 2:19:35 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions'.
[2/1/2015 2:19:35 PM] [2] Beginning processing.
[2/1/2015 2:19:49 PM] [2] Ending processing.
[2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true', handleError = False
[2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true'.
[2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true', handleError = False
[2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true'.
[2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true', handleError = False
[2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true'.
[2/1/2015 2:19:49 PM] [1] Executing '$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile -MofFilePath:$mflFilePath;',
handleError = True
[2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); $mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile
-MofFilePath:$mflFilePath;'.
[2/1/2015 2:19:49 PM] [2] Beginning processing.
[2/1/2015 2:19:49 PM] [2] Exchange tracing provider was installed successfully.
[2/1/2015 2:19:49 PM] [2] Ending processing.
[2/1/2015 2:19:49 PM] [2] Beginning processing.
[2/1/2015 2:19:49 PM] [2] Exchange tracing provider was installed successfully.
[2/1/2015 2:19:49 PM] [2] Ending processing.
[2/1/2015 2:19:49 PM] [1] Processing component 'All Roles Precompile Management Binaries' (Pre-compiling management binaries.).
[2/1/2015 2:19:49 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/1/2015 2:19:49 PM] [2] Beginning processing.
[2/1/2015 2:19:49 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll" /verbose
[2/1/2015 2:19:50 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll
All compilation targets are up to date.
[2/1/2015 2:19:50 PM] [2] Process standard error:
[2/1/2015 2:19:50 PM] [2] Ending processing.
[2/1/2015 2:19:50 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/1/2015 2:19:50 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/1/2015 2:19:50 PM] [2] Beginning processing.
[2/1/2015 2:19:50 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll" /verbose
[2/1/2015 2:19:50 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll
All compilation targets are up to date.
[2/1/2015 2:19:50 PM] [2] Process standard error:
[2/1/2015 2:19:50 PM] [2] Ending processing.
[2/1/2015 2:19:50 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/1/2015 2:19:50 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/1/2015 2:19:50 PM] [2] Beginning processing.
[2/1/2015 2:19:50 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll" /verbose
[2/1/2015 2:19:51 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll
All compilation targets are up to date.
[2/1/2015 2:19:51 PM] [2] Process standard error:
[2/1/2015 2:19:51 PM] [2] Ending processing
[2/1/2015 2:20:07 PM] [2] Process standard error:
[2/1/2015 2:20:07 PM] [2] Ending processing.
[2/1/2015 2:20:07 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.PowerShell.configuration.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/1/2015 2:20:07 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.PowerShell.configuration.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/1/2015 2:20:07 PM] [2] Beginning processing.
[2/1/2015 2:20:07 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.PowerShell.configuration.dll" /verbose
[2/1/2015 2:20:10 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.PowerShell.configuration.dll
All compilation targets are up to date.
[2/1/2015 2:20:10 PM] [2] Process standard error:
[2/1/2015 2:20:10 PM] [2] Ending processing.
[2/1/2015 2:20:10 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Management.SnapIn.Esm.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/1/2015 2:20:10 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Management.SnapIn.Esm.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/1/2015 2:20:10 PM] [2] Beginning processing.
[2/1/2015 2:20:10 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Management.SnapIn.Esm.dll" /verbose
[2/1/2015 2:20:12 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Management.SnapIn.Esm.dll
All compilation targets are up to date.
[2/1/2015 2:20:12 PM] [2] Process standard error:
[2/1/2015 2:20:12 PM] [2] Ending processing.
[2/1/2015 2:20:12 PM] [1] Processing component 'Bridgehead Permissions Configuration' (Setting folder and registry permissions).
[2/1/2015 2:20:12 PM] [1] Executing 'Set-LocalPermissions -Feature:"Bridgehead"', handleError = False
[2/1/2015 2:20:12 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions -Feature:"Bridgehead"'.
[2/1/2015 2:20:12 PM] [2] Beginning processing.
[2/1/2015 2:20:12 PM] [2] Ending processing.
[2/1/2015 2:20:12 PM] [1] Processing component 'Common Perf Counters ' (Configuring performance counters).
[2/1/2015 2:20:12 PM] [1] Executing 'new-perfcounters -DefinitionFileName ExchangeTopologyPerformanceCounters.xml', handleError = True
[2/1/2015 2:20:12 PM] [2] Launching sub-task '$error.Clear(); new-perfcounters -DefinitionFileName ExchangeTopologyPerformanceCounters.xml'.
[2/1/2015 2:20:12 PM] [2] Beginning processing.
[2/1/2015 2:20:12 PM] [2] Processing file: C:\Program Files\Microsoft\Exchange Server\Setup\Perf\ExchangeTopologyPerformanceCounters.xml
[2/1/2015 2:20:12 PM] [2] Performance counter name is Latest Exchange Topology Discovery Time in Seconds, type is NumberOfItems32.
[2/1/2015 2:20:12 PM] [2] Performance counter name is Number of Exchange Topology Discoveries, type is NumberOfItems32.
[2/1/2015 2:20:12 PM] [2] Performance counter name is Number of Siteless Servers, type is NumberOfItems32.
Appreciate if someone can help us move forward in this scenario.
We have
1. disabled anti virus and tried.
2. removed watermarks and action entries in the registry
3. tried almost everything mentioned on google but i am not able to move forward.
Please help. we need this as part of our migration to Exchange 2013 for co-existence.
Thank you.
PhilipExchangeSetup.log (part 3)
[2/2/2015 8:06:45 PM] [1] Executing '$RoleSetupLoggingPath = "C:\ExchangeSetupLogs"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleSetupLoggingPath = "C:\ExchangeSetupLogs"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleFqdnOrName = "pgcvmexg"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleFqdnOrName = "pgcvmexg"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleTargetVersion = "8.3.83.6"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleTargetVersion = "8.3.83.6"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleUpdatesDir = "C:\SP3\Updates"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleUpdatesDir = "C:\SP3\Updates"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleIsClientAccessRoleInstalled = $True', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClientAccessRoleInstalled = $True'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleRoleName = "BridgeheadRole"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleRoleName = "BridgeheadRole"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleDomainController = "PGCDC.platcorp.local"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleDomainController = "PGCDC.platcorp.local"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleProductPlatform = "amd64"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleProductPlatform = "amd64"'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleIsBridgeheadRoleInstalled = $True', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleIsBridgeheadRoleInstalled = $True'.
[2/2/2015 8:06:45 PM] [1] Executing '$RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"'.
[2/2/2015 8:06:45 PM] [1] Found 136 tasks to execute
[2/2/2015 8:06:45 PM] [1] Processing component 'All Roles Common First - Run Once' (Configuring the server.).
[2/2/2015 8:06:45 PM] [1] Executing 'if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName = 'Installdw20shared.msilog';
} install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
LOGVERBOSE=1");', handleError = False
[2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName
= 'Installdw20shared.msilog'; } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
LOGVERBOSE=1");'.
[2/2/2015 8:06:45 PM] [2] Beginning processing.
[2/2/2015 8:06:45 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
[2/2/2015 8:06:45 PM] [2] PackagePath was set to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'; normalizing to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
[2/2/2015 8:06:45 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
[2/2/2015 8:06:45 PM] [2] Installing MSI package 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007.xml, Xml Node Name = _locDefinition
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge.xml, Xml Node Name = _locDefinition
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007_WinSrv2008.xml, Xml Node Name = _locDefinition
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError
= False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge_WinSrv2008.xml, Xml Node Name = _locDefinition
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Executing 'Set-WERRegistryMarkers;', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-WERRegistryMarkers;'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:06:47 PM] [2] Ending processing.
[2/2/2015 8:06:47 PM] [1] Processing component 'All Roles Common First' (Creating the Exchange server configuration in the Active Directory).
[2/2/2015 8:06:47 PM] [1] Executing '$RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); $RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames'.
[2/2/2015 8:06:47 PM] [1] Executing 'Set-LocalPermissions', handleError = False
[2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions'.
[2/2/2015 8:06:47 PM] [2] Beginning processing.
[2/2/2015 8:07:00 PM] [2] Ending processing.
[2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true', handleError = False
[2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true'.
[2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true', handleError = False
[2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true'.
[2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true', handleError = False
[2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true'.
[2/2/2015 8:07:00 PM] [1] Executing '$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile -MofFilePath:$mflFilePath;',
handleError = True
[2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); $mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile
-MofFilePath:$mflFilePath;'.
[2/2/2015 8:07:00 PM] [2] Beginning processing.
[2/2/2015 8:07:01 PM] [2] Exchange tracing provider was installed successfully.
[2/2/2015 8:07:01 PM] [2] Ending processing.
[2/2/2015 8:07:01 PM] [2] Beginning processing.
[2/2/2015 8:07:01 PM] [2] Exchange tracing provider was installed successfully.
[2/2/2015 8:07:01 PM] [2] Ending processing.
[2/2/2015 8:07:01 PM] [1] Processing component 'All Roles Precompile Management Binaries' (Pre-compiling management binaries.).
[2/2/2015 8:07:01 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/2/2015 8:07:01 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/2/2015 8:07:01 PM] [2] Beginning processing.
[2/2/2015 8:07:01 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll" /verbose
[2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll
All compilation targets are up to date.
[2/2/2015 8:07:02 PM] [2] Process standard error:
[2/2/2015 8:07:02 PM] [2] Ending processing.
[2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/2/2015 8:07:02 PM] [2] Beginning processing.
[2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll" /verbose
[2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll
All compilation targets are up to date.
[2/2/2015 8:07:02 PM] [2] Process standard error:
[2/2/2015 8:07:02 PM] [2] Ending processing.
[2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/2/2015 8:07:02 PM] [2] Beginning processing.
[2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll" /verbose
[2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll
All compilation targets are up to date.
[2/2/2015 8:07:02 PM] [2] Process standard error:
[2/2/2015 8:07:02 PM] [2] Ending processing.
[2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Common.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Common.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/2/2015 8:07:02 PM] [2] Beginning processing.
[2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll" /verbose
[2/2/2015 8:07:03 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll
All compilation targets are up to date.
[2/2/2015 8:07:03 PM] [2] Process standard error:
[2/2/2015 8:07:03 PM] [2] Ending processing.
[2/2/2015 8:07:03 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Core.Strings.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/2/2015 8:07:03 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Core.Strings.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/2/2015 8:07:03 PM] [2] Beginning processing.
[2/2/2015 8:07:03 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll" /verbose
[2/2/2015 8:07:03 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll
All compilation targets are up to date.
[2/2/2015 8:07:03 PM] [2] Process standard error:
[2/2/2015 8:07:03 PM] [2] Ending processing.
[2/2/2015 8:07:03 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Net.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
[2/2/2015 8:07:03 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Net.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
[2/2/2015 8:07:03 PM] [2] Beginning processing.
[2/2/2015 8:07:03 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll" /verbose
[2/2/2015 8:07:04 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
Copyright (c) Microsoft Corporation. All rights reserved.
Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll
All compilation targets are up to date.
Maybe you are looking for
-
Disable jsessionid cookie in obiee 11g
Hi All, How to disable creation of "jsessionid" cookie in a web browser. is something we can do from weblogic side? Appreciate our help. Thanks Ram
-
How to display the image which in KM folder using url iview
Hi Friends How to display the image, which is under KM folder structur using the url iview. i trying using url iview url as \document\testfolder\abc.jpg as url for the iview. but its now working .. so please help me how to slove this problem If is n
-
Pkg not in sync db (problem solved)
What does the subject statement indicate to the user attempting to download a given pkg? Is it that the pkg is not available for download from arch ? Is it that the users package base does not include the requested package type? I have attempted to d
-
How we can import image into flash stage through AC3 code
I want to import images form my directory . I do not know the process of importing image through action script3. What is the process to importing image . Do any body know the idea.
-
Custom (not HP's) EVA storage management pack
Hello, I have found this management pack http://www.systemcentercentral.com/pack-catalog/hp-eva-performance-management-pack-v3/ for monitoring HP EVA P6000, thanks for authors, but discoveries are not working, I have SCOM 2012 R2 and HP CommandView i