Upgrading from Server 10.4.3...

I am running Server 10.4.3 on an XServe and just have some basic questions about upgrades. Are there any major concerns with the updates up to and including 10.4.8 that I should be aware of? I cannot upgrade to 10.4.8 yet because of a known compatability issue with 4th Dimension software. Any advice would be appreciated.
Thanks, Brian

We upgraded to 10.4.8 without an issue.

Similar Messages

  • Server 2012 X64 R2 DNS Server keeps shutting down after inplace upgrade from Server 2012 X64

    Hi,
    ever since upgrading from Server 2012 X64 to Server 2012 R2 X64 my dns server keeps shutting down every several minutes before having to do a restart.  When viewing the event log this is all I see..
    The DNS Server service terminated unexpectedly.  It has done this 497 time(s).  The following corrective action will be taken in 60000 milliseconds: Restart the service.
    if I look in the Application Error Log,  I will also find the following:
    Faulting application name: dns.exe, version: 6.3.9600.17031, time stamp: 0x530871fb
    Faulting module name: dns.exe, version: 6.3.9600.17031, time stamp: 0x530871fb
    Exception code: 0xc0000005
    Fault offset: 0x000000000010b0e0
    Faulting process id: 0x1740
    Faulting application start time: 0x01cf531b2e3a7f5e
    Faulting application path: C:\Windows\system32\dns.exe
    Faulting module path: C:\Windows\system32\dns.exe
    Report Id: 90a4ab37-bf0e-11e3-9446-003048df3f03
    Faulting package full name:
    Faulting package-relative application ID:
    I have tried removing and then reinstalling the DNS Server role, but the same situation occurs..
    thanks,

    Hi,
    I'm going crazy,  I've upgraded my Server 2012 Standard to Server 2012 R2 Standard and now my DNS server keeps crashing since the in place upgrade.  I have finally narrowed it down to it only crashes after several minutes if I load the data from
    a file instead of the registry.  As a test I:
    -1- killed all my dns data,
    -2- uninstalled the dns server role
    -3- deleted the /windows/system32/dns directory
    -4- reinstalled the DNS server role
    -5- used the wizard to create a DNS server and a forward zone.
    everything works okay, no crashes,  then I change the advanced propertied of the DNS server to load from file, restart the DNS server and once again it crashes every 2 minutes..
    Please help,  this is killing me..
    thanks in advance..

  • Price to upgrade from Server 2008 Standard to Server 2008 R2

    I need to get the price to upgrade from Server 2008 Standard to Server 2008 R2.
    I performed the upgrade and now have a valid license for 180 days.  What is the upgrade price and how do I get the license?

    Hi, go here to download the licensing information for W2k8 r2
    http://www.microsoft.com/en-us/download/details.aspx?id=18795
    Thanks
    Isaac Oben MCITP:EA, MCSE,MCC <a href="https://www.mcpvirtualbusinesscard.com/VBCServer/4a046848-4b33-4a28-b254-e5b01e29693e/interactivecard"> View my MCP Certifications</a>

  • Upgrade from Server 10.4.3 - 10.4.4 hosed login

    I just upgraded a server from 10.4.3 to 10.4.4 (and then 10.4.5). After the upgrade, I can't get to the login panel. Besides not being to login at the server it seems to be running normally (web server, mail server, etc. functioning). I can login remotely via ssh, and also with the server admin tools.
    Have the following in the /var/log/system.log:
    Mar 22 07:34:30 server2 loginwindow[225]: Login Window Started Security Agent
    Mar 22 07:34:31 server2 crashdump[163]: crash report written to: /Library/Logs/CrashReporter/WaitingForLoginWindow.crash.log
    Mar 22 07:34:38 server2 crashdump[257]: SecurityAgent crashed
    Mar 22 07:34:39 server2 loginwindow[225]: Terminate WaitingForLoginWindow (90)
    Mar 22 07:34:39 server2 loginwindow[225]: AuthorizationRef doesn't have a username (<LoginAuthRefMgr: 0x32c770>).\n
    Mar 22 07:34:40 server2 crashdump[257]: crash report written to: /Library/Logs/CrashReporter/SecurityAgent.crash.log
    Inside the SecurityAgent.crash.log the stack crawl indicates it is crashing in ColorSync:
    Exception: EXCBADACCESS (0x0001)
    Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000004
    Thread 0 Crashed:
    0 com.apple.ColorSync 0x915157dc CMMTable::RemRef() + 0
    1 com.apple.ColorSync 0x91515780 CMMConvLut::~CMMConvLut [unified]() + 84
    2 com.apple.ColorSync 0x915137cc CMMConvNode::RemoveNOPs() + 100
    3 com.apple.ColorSync 0x915137b4 CMMConvNode::RemoveNOPs() + 76
    4 com.apple.ColorSync 0x915137b4 CMMConvNode::RemoveNOPs() + 76
    5 com.apple.ColorSync 0x915137e0 CMMConvNode::RemoveNOPs() + 120
    6 com.apple.ColorSync 0x91513734 ConversionManager::CollapseNodes() + 36
    7 com.apple.ColorSync 0x915113c8 ConversionManager::MakeConversionSequence(CMMProfileInfoContainer*, CMMColorConversionInfo*) + 2160
    8 com.apple.ColorSync 0x91510164 ConversionManager::MakeColorMatchSequence(CMMProfileInfoContainer*, CMMColorConversionInfo*) + 124
    9 com.apple.ColorSync 0x9151ed90 CMMDevLinkProfileMaker::MakeCMMDevLinkProfileInner(CMMProfileInfoContainer*, icTagTypeSignature) + 148
    10 com.apple.ColorSync 0x9151e400 DoNNewLinkProfile + 472
    11 com.apple.ColorSync 0x9151e0ec NCWNewLinkProfile + 228
    12 libCSync.A.dylib 0x94623140 CMSConcatInputProfile + 228
    13 libCSync.A.dylib 0x9462728c CMSCreateDataProviderOrGetInfo + 296
    14 com.apple.CoreGraphics 0x903b99bc createDisplaySpaceWithDisplayID + 156
    15 com.apple.CoreGraphics 0x903b9900 createDisplayColorSpace + 20
    16 com.apple.CoreGraphics 0x903b96f4 CGColorSpaceCreateWithName + 476
    17 com.apple.AppKit 0x938c20a0 -[NSDeviceWhiteColor _createCGColorWithAlpha:] + 52
    18 com.apple.AppKit 0x93721584 -[NSCalibratedWhiteColor colorUsingColorSpaceName:device:] + 208
    19 com.apple.AppKit 0x93721390 -[NSColor blendedColorWithFraction:ofColor:] + 64
    20 com.apple.AppKit 0x9369f0c8 -[NSDynamicSystemColor recacheColor] + 208
    21 com.apple.AppKit 0x9369eee0 -[NSDynamicSystemColor initWithSelector:] + 108
    22 com.apple.AppKit 0x93723800 +[NSColor controlDarkShadowColor] + 92
    23 com.apple.AppKit 0x9369ed10 +[NSColor colorWithCatalogName:colorName:] + 132
    24 com.apple.AppKit 0x9369e7e8 +[NSCatalogColor newWithCoder:zone:] + 208
    25 com.apple.AppKit 0x9369e6fc -[NSColor initWithCoder:] + 588
    26 com.apple.Foundation 0x928ff00c decodeObjectold + 288
    27 com.apple.Foundation 0x928fec40 _decodeValueOfObjCType + 672
    28 com.apple.Foundation 0x928fe724 -[NSUnarchiver decodeValuesOfObjCTypes:] + 100
    29 com.apple.AppKit 0x93722d5c -[NSColorList _decodeWithoutNameWithCoder:newStyle:] + 372
    30 com.apple.AppKit 0x93722bb4 -[NSColorList _parseArchivedList:] + 244
    31 com.apple.AppKit 0x93722870 -[NSColorList _loadColors] + 420
    32 com.apple.AppKit 0x93722684 -[NSColorList colorWithKey:] + 52
    33 com.apple.AppKit 0x93721a7c -[NSCatalogColor colorUsingColorSpaceName:device:] + 288
    34 com.apple.AppKit 0x93757098 -[NSTextFieldCell setUpFieldEditorAttributes:] + 264
    35 com.apple.AppKit 0x93756a3c editTextCellWithTextView + 528
    36 com.apple.AppKit 0x9375673c _NSEditTextCell + 624
    37 com.apple.AppKit 0x937563c0 -[NSTextFieldCell _selectOrEdit:inView:target:editor:event:start:end:] + 212
    38 com.apple.AppKit 0x937562d8 -[NSCell selectWithFrame:inView:editor:delegate:start:length:] + 76
    39 com.apple.AppKit 0x9379e48c -[NSTextField selectText:] + 188
    40 com.apple.AppKit 0x93754f24 -[NSTextField becomeFirstResponder] + 112
    41 com.apple.AppKit 0x9373646c -[NSWindow makeFirstResponder:] + 200
    42 com.apple.securityagent 0x0001cb7c 0x1000 + 113532
    Tried copying all color profiles from another server to this server thinking maybe a profile got whacked somehow, no change. Tried deleting the loginwindow prefs file, no change. Any ideas on what else to do?
    Thanks,
    Ron

    A shotgun approach that might work is to install the 10.4.5 Combo update and hope that it catches whatever happened. Otherwise, you might want to look at the SoftwareUpdate log (I think it's in /var/log) and see if you can find what went wrong. I believe that diskutil can do the perm repair from the command line, also.
    Roger

  • Hyper-V host server upgrade from Server 2008 R2 Enterprise SP1 to Server 2012 R2 Datacentre

    We are about to upgrade our Hyper-V host servers from Server 2008R2 Enterprise SP1 to Server 2012 R2 Datacentre to take advantage of the latest Hyper-V features.
    This only concerns the host servers and not the guest VMs running on the hosts (they will be upgraded next year).
    This is what is running on our host servers:
    Host 1
    File,print & issuing CA server
    Exchange 2010
    SharePoint 2010
    Quickbooks server
    Domain controller 1
    Offline CRL CA
    Host 2
    SQL 2008
    Forefront TMG 2010
    Domain Controller 2
    Windows 7 client
    With this is mind, I have drafted a rough action plan as follows:
    Create a list of all file locations for VM memory, snapshots, virtual memory and Hyper-V config files
    Document all existing system settings
    Gather server information, download drivers, RAID controller and other boot drivers & firmware updates (in case the in-place upgrade fails)
    Test all software media
    Copy all VMs onto external data storage (NAS drive)
    As part of the upgrade process we will redistribute some hard drive space i.e.
    expand them to their new sizes and verify the data integrity of copied VMs by powering up each VM in a test environment
    Wipe and adjust the sizes of the host partitions to accommodate the expanded VMs
    Perform an in-place upgrade to Server 2012 R2 Datacenter
    Check EV, services etc
    Change the default locations for VM memory, snapshots, virtual memory and Hyper-V config files
    Upgrade Anti-virus and other system software
    Test the system
    Are there any glaring omissions? Does anyone have any tips they can give me?

    Hi Marco,
    always do a fresh Installation of your hyper-V Hosts, you could end up doing a lot of Troubleshooting with Drivers,Addons etc.. new Installation ist way faster.
    Depending if you have a Cluster or Standalone Servers there are different ways to do it.
    When you have installed your 2012 R2 Hyper-V Server you just can Import the VMs from the new Location.
    As far as i know VMs with snapshots are not supported, so you have to remove them before doing that move and commit the changes to the vhd files, the VM need to be offline on 2008R2 to do that.
    You do not Need to Export the VMs on 2008R2, just copy it, normaly you should have all Files of a VM in one Folder.
    A working Backup is always your friend on such Tasks.
    When the VMs are running on Hyper-V 2012R2 do not forget to Update the Integration Services.
    Make Sure your Servers Hardware are still supported with 2012R2, see Server Catalog and Support Matrix of the Vendor.
    And last one, where possible and supported convert the VHDs to VHDx Disks, after testing the first boot of the VM.
    Udo

  • ADWS Broken after in-place upgrade from Server 2008 R2 to Server 2012 R2

    I performed an in-place upgrade from 64-bit Server 2008 R2 to Server 2012 R2.  This machine ran Active Directory Web Services. After the upgrade ADWS will not start. I get the following event log error:
    Log Name:      Application
    Source:        .NET Runtime
    Date:          11/21/2014 3:23:02 PM
    Event ID:      1026
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      COMPUTER
    Description:
    Application: Microsoft.ActiveDirectory.WebServices.exe
    Framework Version: v4.0.30319
    Description: The process was terminated due to an unhandled exception.
    Exception Info: System.ServiceModel.CommunicationObjectFaultedException
    Stack:
       at System.ServiceModel.Channels.CommunicationObject.Close(System.TimeSpan)
       at Microsoft.ActiveDirectory.WebServices.WindowsHostService.StartService(System.Object)
       at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
       at System.Threading.ThreadHelper.ThreadStart(System.Object)
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name=".NET Runtime" />
        <EventID Qualifiers="0">1026</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-11-21T20:23:02.000000000Z" />
        <EventRecordID>65596</EventRecordID>
        <Channel>Application</Channel>
        <Computer>COMPUTER</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Application: Microsoft.ActiveDirectory.WebServices.exe
    Framework Version: v4.0.30319
    Description: The process was terminated due to an unhandled exception.
    Exception Info: System.ServiceModel.CommunicationObjectFaultedException
    Stack:
       at System.ServiceModel.Channels.CommunicationObject.Close(System.TimeSpan)
       at Microsoft.ActiveDirectory.WebServices.WindowsHostService.StartService(System.Object)
       at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
       at System.Threading.ThreadHelper.ThreadStart(System.Object)
    </Data>
      </EventData>
    </Event>

    I compared the registry with a working system but the Counters - and all other keys - looked fine.
    At the same time as upgrading a DC a colleague was updating an unrelated server, and he started to see similar events in the event log (but for the Dell OpenManage Essentials service, not ADWS). The error was complaining about KERNELBASE.dll which set my
    spider sense tingling. We knew that this server had Windows Updates pending. Fully updating it solved the problem on that server.
    I solved the ADWS problem in the end by fully Windows Updating the DC. In particular, the ADWS Service started successfully after installing KB2919355 and rebooting. That also
    'unlocked' a further 59 updates pending. 
    After the in-place upgrade I always fully Windows Update but I'm 99% certain that KB2919355 did NOT show up when I did a Check for Updates straight after a reboot so I thought the DC was up-to-date. I then spent hours investigating the ADWS problem and rebooted
    as part of the diagnostics. It was then that I noticed on the logon screen that there were updates pending...
    Moral of the story? Windows Update, then Update again, and again, and again. The length of time it takes to Windows Update after an upgrade from 2008R2 to 2012R2 is painful though.

  • In-place upgrade from Server 2012 to 2012R2 "just quits"

    I have a TechNet subscription and am supposed to get "priority support" but I mistakenly asked my question in one of the forums that is not in the "priority support monitored" list. Included here by reference:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/bbbb34f2-e098-4f7d-b692-88e033869385/windows-server-2012r2-inplace-upgrade-from-2012-quotjust-quitsquot?forum=winserver2012r2previewsetup
    Short description: On the 2012 DataCenter machine which serves as my Hyper-V host, I mount the install media and launch Setup. It starts, copies the temporary files ($windows.~bt) and then just quits.
    Content of c:\windows\setupact.log:
    2013-10-11 10:29:04, Info                  UI     Determining whether we should run ConX or legacy setup
    2013-10-11 10:29:04, Info                  UI     Downlevel OS is server. Continue to run legacy setup
    2013-10-11 10:29:04, Info                  UI     Determining if we are in WDS/Unattend mode
    2013-10-11 10:29:04, Info                  UI     No need to hide autorun
    2013-10-11 10:29:04, Info       [0x0a000a] UI     Autorun:Autorun core successfully  initialized!!!
    2013-10-11 10:29:04, Info       [0x0a000b] UI     Autorun:Autorun UI successfully  initialized!!!
    2013-10-11 10:29:04, Info                  UI     AppWindow has layout style 0
    2013-10-11 10:29:04, Info                  UI     NavWindow has layout style 0
    2013-10-11 10:29:04, Warning    [0x0a0180] UI     Failed to change the UI language to en-US.
    2013-10-11 10:29:04, Info       [0x0a011c] UI     WizardDialogPost::SetActive
    2013-10-11 10:29:09, Info       [0x0a018e] UI     Passing command line parameter ("H:\Sources\setup.exe /HideWelcome /uilanguage:en-US /targetlanguage:en-US") to IBS.
    Would appreciate any suggestions that don't involve doing a detailed documentation capture of how the server is configured followed by a clean install, that is what I'm trying to avoid if possible.
    I am not trying to do anything special or scripted, just a standard OS upgrade.

    Hi Pepper, Malort, Robert and Brandon,
    I am experiencing the same issue using either new release (april 2014) or the gold release 2012 R2 DVD from Volume license (SA) download. Both confirmed working on other installations. Setup just suddenly quits with the same non existent logs
    files in $windows.~bt and c:\windows\setupact.log has a warning statement "Failed to change the UI language to en-US"
    The server is running as a vm and would otherwise appear to be running perfectly. It is a DC(GC), DHCP, DNS & CA for my site.
    Going to try System Update readiness Tool KB947821-v33.
    Heads up MSFP Anne, any word on the cause and/or fix?
    Regards,
    Andre
    Same here,
    trying to upgrade a server 2008 R2 server running on hyper-v to server 2012 R2 with update1.
    The server was a server 2008 and was upgraded to server 2008 R2.
    This is the only log i can found:
     2014-07-04 14:20:13, Info                  UI     Determining whether we should run ConX or legacy setup
    2014-07-04 14:20:13, Info                  UI     Downlevel OS is server. Continue to run legacy setup
    2014-07-04 14:20:13, Info                  UI     Determining if we are in WDS/Unattend mode
    2014-07-04 14:20:14, Info                  UI     No need to hide autorun
    2014-07-04 14:20:14, Info       [0x0a000a] UI     Autorun:Autorun core successfully  initialized!!!
    2014-07-04 14:20:14, Info       [0x0a000b] UI     Autorun:Autorun UI successfully  initialized!!!
    2014-07-04 14:20:14, Warning               UI     CLanguages::v_InitLanguage - Failed to load en-US resources with error 2. Will load fallback binaries
    2014-07-04 14:20:15, Info                  UI     AppWindow has layout style 0
    2014-07-04 14:20:15, Info                  UI     NavWindow has layout style 0
    2014-07-04 14:20:15, Warning    [0x0a0180] UI     Failed to change the UI language to nl-NL.
    2014-07-04 14:20:15, Warning               UI     CLanguages::v_InitLanguage - Failed to load en-US resources with error 2. Will load fallback binaries
    2014-07-04 14:20:15, Info       [0x0a011c] UI     WizardDialogPost::SetActive
    2014-07-04 14:20:16, Info       [0x0a018e] UI     Passing command line parameter ("D:\Sources\setup.exe /HideWelcome /uilanguage:nl-NL /targetlanguage:nl-NL") to IBS.
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 9 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 16 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 16 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 17 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 17 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 9 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 18 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 9 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 18 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 9 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 9 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 16 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 16 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 17 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 17 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 9 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 18 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 9 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 18 key on 0
    2014-07-04 14:21:03, Warning    [0x0a0010] UI     WM_KEYUP for 9 key on 0

  • Upgrade from server 2012 to server 2012 R2

    Hi, my question is about the price,
    I have a windows Server 2012 up and running and want to upgrade it to server 2012 R2. Is this operation Free or I should purchase another license for upgraded windows?
    Thanks,

    These are 2 different versions, you need have license.
    Upgrade means
    moving from your existing operating system release to a more recent release, while staying on the same hardware. For example, if your server is running Windows Server 2012, you can upgrade it to Windows Server 2012 R2. You can upgrade from an evaluation version
    of the operating system to a retail version, from an older retail version to a newer version, or, in some cases, from a volume-licensed edition of the operating system to an ordinary retail edition.
    Ref : http://technet.microsoft.com/en-us/library/dn303416.aspx
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • Upgraded from server 2008 r2 to server 2012 r2 standard and nothing is working

    I'm actually working on putting together a server using Server 2012 r2 as well, but we tested everything on it prior to launch and are now in the migration phase with only one application not cooperating: Exchange 2010...If you have another functional server running to keep DirSynch going with, would definitely suggest either upgrading something or downgrading another to allow for compatibility issues.We're going to keep using Exchange 2010 on the server it's installed on until we can upgrade it to 2013, otherwise if we moved it while everything else is moving, we will lose email altogether and end up with a lot of angry users...Certainly a lot of compatibility issues regarding server OSes I'm finding in my 1.5 years working here so far... I'm quickly learning the importance of researching these kinds of issues, So hey, welcome to...

    Hi Everyone
    I am desperate, I have upgraded a server to 2012 and it appears to stop DirSync from running. I can't uninstall the program because it doesn't launch the uninstall program from the control panel. I get an error message
    windows.immersivecontrolpanel server execution error
    This topic first appeared in the Spiceworks Community

  • Upgrading from Server 03 to 08?

    Does anybody know of any issues I would encounted in CFMX7 if I upgrade the server OS form Server 2003 to Server 2008?

    Hello,
    According to Adobe CF7 supported platforms CF7 only supported up to Win03 and IIS6. Having said that it is possible to make it work on Win08, you may do well to update the JVM from the one  7.0.2 installs.
    CF7 support matrix:
    http://www.adobe.com/products/coldfusion/coldfusion7/pdfs/cfmx7_systemsupportmatrix.pdf
    HTH, Carl.

  • In-place upgrade from Server 2012 to Server 2012 R2

    I have a Dell PowerEdge 1850.  I installed Server 2012 Standard. This works fine.  I made it a domain controller in an existing domain.  I also added Print Management Role.  This was working fine.
    I then did an in-place upgrade to Server 2012 R2.  Now it is stuck in a rebooting loop.
    It says "Your PC needs to restart. Please hold down the power button.  Error Code: 0x000000C4.  Parameters: 0x0000000000000091, 0x00000000000000F, 0xFFFFF803827DCA00, 0x0000000000000000.
    I cannot get out of this loop.  Others have said they have this problem when installing with virtualization.  However, I am installing on the native hardware.  The CPU does not support hardware virtualization.
    This worked fine with Server 2012.  In fact, I have 4 other Domain Controllers that are identical to this one running Server 2012.  Did Server 2012 R2 add a CPU feature check that is hampering this?  
    Don Demars

    The 1850 is a pretty old box.  What you are running into sounds like the lack of a proper disk driver for the box (I've had that happen multiple times during new releases).  The disk driver needs to be provided by Dell.  I don't believe Dell
    supports the 1850 with 2012 R2, so getting a driver for it might be a bit of a challenge.  You can find which servers Dell supports under the different versions of Windows Server by checking out
    www.windowsservercatalog.com.
    Microsoft only puts supported device drivers submitted by the vendors well ahead of time on the distribution media.  Seeing that you were able to get 2012 running on the 1850s earlier, my guess is that you had separate media for the driver that you
    used during the installation.  There is a place during the installation that allows the loading of device drivers that are not on the installation media.  If you can get Dell to give you a driver for 2012 R2 for the 1850s, maybe you can update the
    driver under 2012 and then update the OS.
    Personally, though, I never upgrade a domain controller in place.  It is so easy to simply create a new one and add it to the domain.  Then, if you do have a driver for 2012 R2, you can load it during the clean installation.
    . : | : . : | : . tim

  • In-place upgrade from Server 2012 to 2012R2 is failing

    Hello,
    I'm trying tu upgrade a VM from Windows server 2012 to Windows Server 2012 R2, but the upgrade is failing with an error message "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation.
    Error code 0x80070522"
    The VM i'm trying to upgrade has SQL server 2012 and some related tools installed
    The VM is running on a Windows server 2012 Hyper-V host
    I have tried a few different installation media, downloaden from the MS licensing site and from MSDN, but all give the same problem.
    After searching for logs i found these relevant messages in C:\$WINDOWS.~BT\Sources\Panther\setuperr.log
    2014-07-15 11:25:10, Error      [0x0803b6] MIG    Can't retrieve group information for user NT SERVICE\MsDtsServer110. NetUserGetLocalGroups failed 0x000008AD
    2014-07-15 11:25:10, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\Classic .NET AppPool. NetUserGetLocalGroups failed 0x000008AD
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {050ed09e-a530-41e6-8ac9-a9a96e74a2c1}: [shmig] Failed to get launcher layout, hr=0x80070002
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    // a lot of these kind of messages
    2014-07-15 11:27:55, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-07-15 11:27:55, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-07-15 11:28:24, Error      [0x0808fe] MIG    Plugin {65cbf70b-1d78-4cac-8400-9acd65ced94a}: CreateProcess(s) failed. GLE = d
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-07-15 11:28:32, Error      [0x0803b6] MIG    Can't retrieve group information for user NT SERVICE\MsDtsServer110. NetUserGetLocalGroups failed 0x000008AD
    2014-07-15 11:28:32, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\Classic .NET AppPool. NetUserGetLocalGroups failed 0x000008AD
    2014-07-15 11:28:43, Error      [0x0803b6] MIG    Can't retrieve group information for user NT SERVICE\MsDtsServer110. NetUserGetLocalGroups failed 0x000008AD
    2014-07-15 11:28:43, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\Classic .NET AppPool. NetUserGetLocalGroups failed 0x000008AD
    2014-07-15 11:31:35, Error      [0x0808fe] MIG    Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: CBrgUnattend::CollectBridgeSettings failed: 0x1, 0
    2014-07-15 11:33:25, Error      [0x0808fe] MIG    Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Failed to read machine binding, hr=0x80070002
    2014-07-15 11:33:25, Error      [0x0808fe] MIG    Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Error reading Server Info hr=0x80070490
    2014-07-15 11:33:28, Error      [0x0606cc] IBS    WIMApplyImage failed; hr = 0x80070522[gle=0x00000522]
    2014-07-15 11:33:28, Error      [0x0600a1] IBS    DeployImage:Image application failed; hr = 0x80070522[gle=0x00000057]
    2014-07-15 11:33:28, Error      [0x060082] IBS    Callback_ImageTransfer:Failed to lay down the WinPE image; hr = 0x80070522[gle=0x00000057]
    2014-07-15 11:41:11, Error      [0x0606cc] IBS    WIMApplyImage failed; hr = 0x80070522[gle=0x00000522]
    2014-07-15 11:41:11, Error      [0x0600a1] IBS    DeployImage:Image application failed; hr = 0x80070522[gle=0x00000057]
    2014-07-15 11:41:11, Error      [0x060082] IBS    Callback_ImageTransfer:Failed to lay down the OS image; hr = 0x80070522[gle=0x00000057]
    Can anyone help me with this issue?
    Regards,
    Tom

    Yes, domain admins are members of the local administrator group when the macine is joined to a domain, but the opposite is not true.  Local admins are not necessarily members of the domain admins group.
    . : | : . : | : . tim
    Tim,
    Yes i Understand that a local administrator is not always a domain administrator, but i think this has nothing to do with my problem.
    To be sure i have logged in to this server with the local administrator user and started the upgrade again. As expected I got the same error message, so this is nog a permissions problem.
    Can somebody who can help me to solve this probleem?
    Regards,
    Tom

  • Upgrading from server 2008 R2 to 2012 R2

    I am currently using windows server 2008 R2 with 5 CALS. Is there any way to upgrade to windows server 2012 R2 at a discounted price because I have windows server 2008, maybe something like an upgrade offer simmilar to windows 7 to windows 8? Thank you

    Hi,  
    For licensing related issue, you’d better contact Microsoft licensing team. In the United States and Canada, you
    may call the licensing team directly at 1-800-426-9400
    (select option 4), Monday through Friday, 6:00 A.M. to 5:30 P.M. (PST) to speak directly to a Microsoft licensing specialist. In this way, you will know the detailed information about license.  
    Worldwide customers can use the Guide to Worldwide Microsoft Licensing Sites http://www.microsoft.com/licensing/worldwide.aspx
    to find contact information in their locations.  
    Thank you for your understanding!
    Regards.
    Vivian Wang

  • Upgrade from Server 2003 Small Business Edition

    Hi
    I have  one  DC  with  2003 Small Business version.  I have  upgraded it to  Domain Functional Level 2003.  When  I try to add  a server 2012 DC , the  error  message  on the  Server 2012
    server manager   communicates that  the  level is  2000.
    I have  checked the  DNS  setting  on the  DC  with 2003 and there  is a A record  for  the  DC,  DNS  seems  to be  fine as I was reading that  this  problem  occurs when
    DNS  is  not configured  correctly.
    The  DNS  server  is server is  currently  the 2003 DC. 

    This one may help.
    http://fawzi.wordpress.com/2009/10/30/quick-tip-query-active-directory-functional-levels/
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Inline upgrade from server 2012 to server 2012r2

    just wanted to see peoples experience for upgrading server 2012 to server 2012r2 on an inline upgrade?  is this ok to do or a reimage is best?
    thanks

    Hi iworkhere,
    I have a Windows Server 2012 DC and a Windows 2012 member server in my lab environment. I have upgraded them to Windows Server 2012 R2 with no issue. After upgrading, you will
    have a Windows.old folder under C:\ and as there is no disk cleanup tool in Windows Server versions without the Desktop Experience feature, you may have to delete it manually if needed.
    In addition, if no data needs to be kept in Windows Server 2012, you can choose either a clean installation or a upgrading. Personally, I prefer the clean installation.
    Hope this helps.
    Jeremy Wu
    TechNet Community Support

Maybe you are looking for