Upgrading from WebHelp 2002 to Chrome compatible version

I am currently responsible for upgrading a web-based application to be cross browser compatible. This application has a tutorial generated from Robohelp which is displayed using Webhelp 2002, which sits on one of our Linux servers.
Unfortunately this version is not chrome compatible, and therefore the left hand menu does not work in chrome. Is someone able to put me in contact with the person at Adobe who can explain the upgrade process to me?
Thanks in advance

It sounds like maybe you have a bigger problem than the need to upgrade. Do you only have the output files or do you have the source files as well?
The structure of the folder containing the output files will have various files and folders prefixed wh...
If you don't have the source files you are going to have to recreate them from the output files.
The free way of doing that is described at http://www.robowizard.com/RoboWizard/NewProject.htm#MonthlyScry/062004.htm
and there is quite a bit of work involved in that.
The alternative is a script you can purchase from http://www.wvanweelden.eu and given the time it will save, you may feel it is worth the outlay.
Check with Willam that his script will work with the output files you have. It sounds like they could be from an old version of Rh.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compresso

I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compressor/decompressor (codec) installed" Where has it gone? Where do I get a new one? I am getting REALLY REALLY fed up with trying to find an answer!!!!!!!!

Try to disable hardware acceleration in Firefox.
*Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Jannuary 2014 -I need Upgrade from ios 4.3.5 to version 0.6.x -NO ios 7!-

my iphone is MC605lP (iphone 4)
the system is now in use ios 4.3.5 (8L1)
I never upgraded to ios 7
I need to upgrade from ios 4.3.5 to version 6.x.x or better for my iphone 4
NO ios 7.x.x !!!!
Help can someone tell me how?
Regards
Stefano

But many people on the web say: os 7 does not work on the old phone! (it will be true?)
I'm afraid of losing the performace of the iPhone (and the data).
so ... I can not get the right version because I forgot to download it?
Are you sure?

Upgraded to Mavericks, can't download compatible version of iPhoto

Yesterday I helped a friend upgrade his iMac to Mavericks (from Mountain Lion), so that he could run the same version of iWork as was on his MacBook.
The upgrade went fine, except for iPhoto.
The existing version of iPhoto is too old to run on Mavericks, and the version he can download from the app store is Yosemite only.
I've had him follow these instructions: Install the latest compatible version of an app on an earlier version of iOS or OS X
But the version of iPhoto that he can download through the Mac Store Purchases tab warns him that it will only run on Yosemite.
My understanding is that old versions of software should always be available to download through the Purchases tab, so I'm assuming that this is a bug with the rollout of Yosemite and will be fixed at some point.
In the mean time, does anyone know of a way around this?
As far as I know there's no way to copy iPhoto from my computer to his? And since everything is through the app store, I can't think of anyway I can download an installer for him.
Would appreciate any suggestions,
Adam.
PS. I am aware I could upgrade him to Yosemite but I'd much prefer to wait for 10.10.2 before doing so.

What I can suggest, is to update your OS to Yosemite.
Its supposed Apple is not going to give an older version of iPhoto just to run on Maverics because every Mac running Maverics is available to run Yosemite as well.
This is why I suppose you can't find a version of iPhoto to use on Maverics anymore.
This is my suggestion, an let me say Yosemite is an amazing OS, I'm using for months, since the 1st public beta.

How do I upgrade from Acrobat 8 to the latest version of Acrobat

I was looking in the shop and it only gives the option to upgrade from 9 on. We have 13 Acrobat 8 licenses that we would like to upgrade if possible. Any suggestions?

Hi cathyt873
Upgrade to Acrobat XI from Acrobat 8 is not possible. You need to purchase the full version.
Please refer : Buying guide | Adobe Acrobat XI Pro

Related to Upgrade from 9.3.1 to 11 version

Hi Experts,
I need to upgrade from 9.3.1 to 11.1.1.3/11.1.2.1.
I know recommeded to install on new servers;
1) What if client ask to upgrade (no new server) on existing one.
2) How to handle if we have already Tomca Appache (app server) on 9.3.1 and now 11 doesn't support.
what points to keep in mind with these two challenges to reduce some complexity.
Regards
Kumar

I think your question is not one that can always be answered quickly on a forum but it is worth you having a read of the following on Oracle support - "Upgrade Advisor: Enterprise Performance Management (EPM) System Upgrade from 11.1.1.3 to 11.1.2.1 [ID 324.1]"
Yes it is 11.11.3 to 11.1.2.1 but it goes through all the different stages from evaluation to acceptance, the information provided is relevant to other versions.
It is possible to upgrade from on the same server, tomcat is no longer supported so the web app server used will be weblogic.
There is also details in the documentation about upgrading - http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install_11121/frameset.htm?ch05.html
Cheers
John
http://john-goodwin.blogspot.com/

Upgrade from Photoshop CS6 Student to normal version?

Hello there,
Last year I bought Photoshop CS6 Student as I was a student back then. Right now I started a business and want to keep using photoshop legally. Is it possible to upgrade from a student license to a normal license? What is the price of this upgrade? Or can I just use my student version for business purposes? (I guess not)
Thanks in advance
Regards

Primarily a budgetary concern. At the time, I had $199 to spend on the upgrade. The extra $200 wasn't going to happen before the end of December when the pricing was said to increase so I went ahead and picked up CS6. The 3D capabilities would be nice to have and probably would be helpful in future projects, but the need right now was to get the upgrade to the standard with the (now presumably false) assumption I could upgrade when I had a few more gigs show up.
If it's another $400 to upgrade, it won't be worth it for me. My primary job is programming, I only do side work for photography and some simple design and while it'd be nice to have some basic 3D ability in Photoshop, it's not $600 worth (400 for the upgrade + the $200 I already spent).

Windows 10 Upgrade from Windows 7 (Direct X12 Compatible?)

I'm currently using a Acer Aspire 7551-3749 Notebook Laptop that is about more than 7 years old, but i'm upgrading to Windows 10, completely factory resetting (maybe) before I install Windows 10.
Current Specifications:
Windows 7 Home Premium (Service Pack 1)
Processor: AMD Athlon(tm) II P340 Dual-Core Processor 2.20 GHz
Installed Memory (RAM): 8.00 GB (7.75GB Usable) [Upgraded from 3GB Ram]
System Type: 64-Bit Operating System
Pen/Touch: No informtion
Graphics Card / Adapter Type: ATI Mobility Radeon HD 4200 Series
Chip Type: ATI Display Adapter (0x9712)
DAC Type: Internal DAC(400MHz)
Total Available Graphics Memory: 3067MB
Dedicated Video Memory: 256MB
System Video Memory: 0MB
Shared System Memory: 2811MB
Would my system be able to Run Direct X 12?
Please reply.
Thanks.

I'm a frequent poster on the Windows 10 forums, and my advice to folks in this situation (which, by the way includes me since one of my Win10 upgrades went badly, as well) is that an old OS that works well on your machine is vastly preferrable to a new OS that works badly. Installing Win10 messes with the partition structure on the hard drive, nearly always, this results in corrupting any original Recovery partition on the drive -- in fact, the EULA mentions that you won't be able to use that to restore your original OS, but it's buried down in there where no one will see it. Presuming you do not have a full image backup of your machine (or you would have said so), at this point, about all you can do is contact HP support and order Recovery Media. This will be a set of DVDs and a CD, and you can then use them to restore your machine to its original condition. Unfortunately, this will remove all data, settings, and applications from your drive. And, given that yours is not a new machine (I presume), HP will require you to purchase that media.

Upgrade from PageMaker to InDesign. What version is best and will old serial number work?

I'd like to upgrade from PageMaker 6.5 to InDesign. Should I wait for InDesign C S5. Will InDesign C S5 support PageMaker? Or should I upgrade to InDesign C S4? And if I have an old serial number for PageMaker 6.5, how can I complete the upgrade? I understand the older PageMaker serial numbers are no longer recognized.

I understand that Adobe is already selling InDesign CS5 and therefore you would have no choice if you want to upgrade. I would think that the easiest way of finding if your PM serial number applies for an upgrade is to try buying an upgrade. You don't need to complete the purchase if you don't want to.

Cisco 1141N AP upgrading from 12.4 to the latest version 12.x

Hi,
I purchased the 1141n AP. Last year when in May, I called Cisco support for help. He told me it, the 1141n would not works alone, it needs the controller. However, He also stated that the new version of IOS will be working as the access point alone.
So I have it, donwload the latest software c1140-k9w7-tar.124-21a.JY.tar from Cisco.com.
Is this the correct version for 1141N and can it work as stand alone now, or acting as the extended WDS extended from the other AP like Apple Extreme.?
please advice.
Thanks

Did you buy a 1141LAP or 1141AP? If you bought an LAP, you are going to have to transfer that IOS image you downloaded to your 1141 using xmodem, TFTP, or borrow your buddy's controller, associate your lwap to it, and revert it to IOS. I don't recall how to do it using xmodem (it's a pain and takes forever anyway), but here's the documentation of how to do it using a TFTP server:
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp161272
If you bought a 1141AP, you're in luck! Just plug that bad boy into your router, grab the ip, navigate to the http server of it using that ip, and configure away using the web gui! From there, you can even upgrade to the latest version of IOS very easily!
Good luck!

Upgrade from 10.4.11 to recent version?

I am trying to upgrade my Mac OS version, currently 10.4.11.
My software upgrade tells me I am completely up-to-date with my software.
I am using a Mac Pro 2 x 3 GHz Dual-Core Intel Xeon machine.
With 2 GB 667 MHz DDR2 FB-DIMM.
What do I have to do to enjoy the latest Mac OS Version so I can start using iCloud and other upgrades of different programs?

Buy the $29 Snow Leopard disc from Apple and install it. Then do the online upgrade to Lion. You'll have to pay for both upgrades. Apple may also encourage you to buy the other software and get the full box set for Snow Leopard but it's up to you if you think you need/want it.
Snow Leopard 10.6 Technical Requirements - http://support.apple.com/kb/SP575
A Mac OS X 10.6 Snow Leopard Application Compatibility List - http://snowleopard.wikidot.com/
OS X Lion Technical Specifications - http://www.apple.com/macosx/specs.html
Installing Lion: Our complete guide - http://www.macworld.com/article/161064/2011/07/installing_lion_complete_guide.ht ml
How to install Lion over Leopard - http://www.macworld.com/article/161087/2011/07/install_lion_over_leopard.html
OS X Lion: Installation Guide, Boot Discs and Q&A - http://www.macstories.net/mac/os-x-lion-installation-guide-boot-discs-and-qa/
Note, no PPC generation applications (something somebody still running Tiger may have around) are supported by Lion. Check your versions and consider additional upgrade costs you may incur with using Lion.

Do I have to pay to upgrade from iPhoto '09 to the latest version?

I just bought my first iPhone (the 6), and I want to automatically transfer photos from my (and my wife's) iPhone 6, to iPhoto. I am using iPhoto '09 and I believe I have to upgrade it to the latest version to make that happen. I went to the App store to upgrade, but it wants to charge me $14.99. I thought we didn't have to pay for upgrades any longer if we owned a legit previous version (came pre-installed when I bought my Mac in 2009. Can anyone shed any light on this? Or, recommend another app? Thanks.

Yes
backup your iPhoto library and purchase the latest version of iPhoto (version 9.5.x) from the App store
If you own any version of iPhoto '11 it is a free update - if you own older versions like iPhoto '09 it is a paid upgrade
LN

"upgrading" from 3.6 to a full version of 5

Hi. I just purchased a new full version of LR 5 (because it was cheaper than buying the upgrade version) and am wondering if it will still move all my work and presets to the full version from the 3.6 version that I currently have on my pc.
Thanks

I found my answer after browsing through the Lightroom Facebook page. "The upgrade version is the same program as the non-upgrade, the difference is just pricing of how you get a license to work with the application."

Upgrade from ECC 6.0 to higher version

Hi friends,
We are interested to upgrade our existing version 6.0 to higher one.
I would like to know where I can get the details with advantage over 6.0
Thanks in advance,
Jayant Joshi

Hi Eduardo
I suggest you to look into the corresponding releasestrategy brochure from http://service.sap.com/releasestrategy (large, middle, small customers).
In the upgrade information center (http://service.sap.com/upgrade), you find (...) and an FAQ Document. This document deals with your release combination (4.6c -> ECC 6.0/higher)
regards
Andreas Rudolph
Edited by: Andreas Rudolph on Sep 14, 2009 10:43 AM

IDSM 2 Upgrade from 6.2(2)E4 to version 7.x(x) E4

Hell Frz ..
I am planning to upgrade IDSM 2 from current version 6.2(2)E4 to latest version 7.x .
Could you please guide me how to upgrade it to latest version and also let me know what precausionary measurs I have to do before upgrade .
Thanks in advance .
Regards ..
Manik Palekar

You can either upgrade it via the GUI (IDM) or via command line (CLI).
Via GUI: Configuration -->Sensor Management --> Update Sensor:
http://www.cisco.com/en/US/docs/security/ips/7.0/configuration/guide/idm/idm_sensor_management.html#wp2219913
Via CLI:
http://www.cisco.com/en/US/docs/security/ips/7.0/installation/guide/hw_system_images.html#wp1088688
Hope that helps.

Upgrading from WebHelp 2002 to Chrome compatible version

Similar Messages

Maybe you are looking for