Upgrading G5 to Tiger or Leopard

this question was originally posted in the 'ipod 3' section--but i need further information please. i have a G5 OS S v.10.3.9 (non-intel chip) Mac. neding to update software to function with my new nano ipod 3. my question involves other applications i already have on my existing Mac configuration. i have CS2 Photoshop & Illustrator/After Effects 6.5 & a version of Microsoft Office that runs on this computer (not sure which software version). will i lose the ability to work with these applications & have to re-purchase new applications to function with the upgrade to either Tiger or Leopard. that's a lot of cost just to be able to use the latest version of ipod nano. please help--thank you

Hi Again bluemoondream!
Refer to My Reply, in your Other Topic.
ali b

Similar Messages

G5 Dual Core with ATI X1900GT - upgrade to FCS2, Tiger or Leopard?

Hi everyone,
I am little confused what to do. So, maybe somebody can advise me what it would be the best.
Here is the situation:
I am still using my G5 Dual Core 2.0 with an ATI X1900GT card, 8.5GB RAM and Decklink SP (as below states). I intend to use it till the end of this year, and then to switch to the fastest at that moment Mac Pro. Now, I have 10.4.11 and FCS-1 with almost all filters from Noise Industries. Everything works perfect.
But I would like to upgrade to FCS-2, especially because of Motion3 new features. The questions are:
1. Stay with Tiger and do the upgrade to FCS-2? And after that how the Motion3 will work? With similar speed? Or better, maybe worse? (I am not afraid about Final Cut - it shouldn't be any problem, but what about Motion?)
2. Upgrade the system to Leopard, and then upgrade the FCS?
But what about the graphic card drivers? On the Ati/AMD web site there are still (from over a year) drivers for Tiger and not for Leopard. Without the proper drivers it could be a problem to install the FCS. Few months ago, when I was changing the startup disk for WD Raptor, I did the clean system installation and tried to install FCS-1. But I forgotten about installing the ATI drivers. When I tried to install, the FCS shows the info that this computer doesn't have the graphic card which support Quartz Extreme. Of course, after installing those drivers everything works OK.
So, how it could be with Leopard?
3. Will the all filters (I mean filter from Noise Industries) work fine in Motion and in FCP?
4. Will the old Motion project open correct in Motion3? I use the old project quite often.
+For those upgrades I can use another (cloned) startup disk to avoid the "dramatic" situation.+
I appreciate any help. Thanks in advance.
Marek.

Thanks for all replies.
It looks that it is not a bad idea to stay with 10.4.11, and upgrade only the FCS.
I will do this on my clone disk, and check if everything works fine.
But, is it possible to install Motion3 (from FCS2 upgrade disks) and leave the Motion2 on the same disk being installed? (I suppose no, but asking just in case)
I checked the specification of the Noise Industries - filters work fine in both system Tiger and Leopard (most of them I am using now, except of those filter which need FCP6 and Motion3), so I think I will stay with Tiger.
Peter, do you know what capabilities exactly I can loose staying with Tiger? Do you use those filters (or some of them)?
Marek.

UPGRADING TO EITHER TIGER OR LEOPARD FROM PANTHER 10.3.9

Dear gentleman
i have  doubt and i would like to have  your experienced point of  view><
if i upgrade from my PANTHER 10.3.9 to either Tiger or Leopard><
will i have same background failures i am having ><
or the new
upgrade os ( tiger / leopard)  software will give me a new healthy sistem , clean from all the recent Kernel Panic iam having since more then a week!!!??????????????????
i have been reading that a  clean installation of the same OS IT IS BETTER THEN A NEW UPGRADING ,
because the clean installation it will let out all the failures and so nothing of the >old troubles ( kernel panics and so others broken files and so on ) would be present effect my pc in that case!
is that truth????????????
what  you think ??????????
sincerely regards
wish a good week to all of  you
gio
Message was edited by: exposure1

gio,
If you PowerBook G4 meets the Tiger System Requirements, or the Leopard System Requirements, and your Hard Drive is not failing, then you can perform an Erase & Install of either system.
That should make your Mac operating system, once again stable.
But if the Kernel Panics are being caused by incompatible peripherals, Hardware, or Third-Party applications or programs, once you reintroduce those items, you will once again have Kernel Panics.
If you do an Erase & Install of your original operating system, or Panther 10.3.x, the same would be true.
Member cornelius, has posted a guide to Erase & Install here Formatting, Partitioning Zeroing a Hard Disk Drive, authored by cornelius
Your Other Topics regarding this issue:
CRASH EVERYDAY ON MY POWERBOOK G4 WHAT IS GOING ON?
need infos
need YOUR ADVICE
Crash Report here another WINDOWSERVER.CRASH ( REPORT
ali b

Upgrading OSX -- To Tiger or Leopard?

I need to upgrade OSX if I want to run Adobe Lightroom. My computer is currently running Panther, and I need at least Tiger to make things work. The question is, Leopard is coming out in "spring 2007", which seems to me to be now. Is there any more info on when that will be?
Second question, is there any situation where I would be able to buy Tiger now and then upgrade free to Leopard, given that Leopard will hopefully be available any day now?
I need a better photo system asap (baby was due two days ago). Should I find something that doesn't depend on OSX? I really don't want to get stuck with an outdated version just because of the timing of the Leopard release.

Hello Elizabeth,
" Is there any more info on when that will be? "
No one here knows. If they did know they would never say here. That would be speculation and speculation is not allowed in here.
" Second question, is there any situation where I would be able to buy Tiger now and then upgrade free to Leopard, given that Leopard will hopefully be available any day now? "
Very doubtful. I suppose you may have a case if you bought on Monday and Leopard was released on Tuesday.
" Should I find something that doesn't depend on OSX? "
Only you can decide that one Elizabeth! There are many many options for alternate applications. Everything gets outdated at some point.
Regards
Ian

Can someone POST Plug-In count TIGER vs LEOPARD?

I know I have read conflicting posts but have never seen anything concrete from say barefeats or macworld regarding AUDIO benchmarks.
Would appreciate reading track (virtual instruments) and plug-in count with TIGER vs LEOPARD.
Thanks.

According to Apple's system requirements I need to upgrade to either Tiger or Leopard to get Logic Studio to run on my G4. Does anyone with a simlilar machine have advice of whether 10.4 or 10.5 will be my best bet? -Thanks

Tiger or Leopard for Logic Studio on my G4?

(This is a repost from a reply in another topic) According to Apple's system requirements I need to upgrade to either Tiger or Leopard to get Logic Studio to run on my G4. Does anyone with a simlilar machine have advice of whether 10.4 or 10.5 will be my best bet? Also how do I do a "clean install" and will it make a difference. -Thanks

Before doing a clean install please make sure you've back-up all your Songs,
then test to see if they work,
after they have work then you could then select the Hard-Drive from where you install L.P. 8 by double clicking onto it and use Spotlight which is at the Upper-Right of the H.D. you've just enter,
and type Logic-Pro 8 in seconds the installed Files will appear highlight all the Files you want that comes up saying Logic-Pro 8
Right-Click onto them then select Trash or Manually Drag them to the Trash.
As to whether you want to use Leo or Tiger its up to you,
I would love to use Leo however at this time it isn't fully supported by Digi Design Pro-Tools LE oo2R, so i'll have to wait before i jump in,
therefore if you don't have wait the choose is yours, Logic -Pro 8 requires OSX 10.4.9. straight to Leo + Quicktime 7.3
Good-Luck and a happy new-Year.
Fr.BlayZay.

Client Upgraded from Tiger to Leopard Can No Longer Connect to Tiger Server

I just finished upgrading a G5 2GHz DP Powermac from Tiger to Leopard. This was an Archive and Install upgrade with importing the old settings. After verifying the account migration, including .Mac connectivity, and fixing all 3rd party software compatibilities/upgrades, I tried to connect to our Tiger 4.11 server by clicking on the server's Icon in the Shared section of the Finder Sidebar. The finder then switches to browse the the server for shares: "Connecting..." is displayed under the tool bar, with a "Share Screen..." and "Connect As..." buttons to the right.
At this point the "Connecting..." remains displayed with the spinning circle in the bottom right of the Finder window.... spinning. This situation continues for several minutes until is seems the system gives up.
If I click on the Path button on the Tool Bar, and go up to the Shared level, ALL the Shares on the Network are displayed, including all the Tiger Client machine shares. I can click on the triangle beside the Tiger Client's icon, and all the drives and home directories on the Mac are listed. All the client shares can be accessed without any issues. NOTE: There are no other Leopard clients on the LAN.
Prior to the Leopard upgrade, this client could connect to the Tiger server as well. All the other clients on the LAN can access the Tiger server also.
On the Leopard client I have tried clicking and the "Connect As..." button and using the menu "Connect to Server" and specifying the server's IP, and I get the same "Connecting..." message with a "non-connecting" result.
I can only assume that somehow the Account Name and password are not being passed correctly. But, using "Connect As..." should resolve that. However, "Connect As..." does not give me a user/password window!
If I check the AFP Access log on the Server, the only messages displayed are "Mounted Volume..." No messages in the error log, and no messages in the "Connections" section.
Can anyone help me figure out why the Leopard client can not connect to the Tiger Server?
My apologies if the description of my problem is a bit disjointed. I have been thrown into server admin and am learning "Trial by Fire".
Any help or suggestions on how to resolve this issue will be greatly appreciated.
Thanks
Gary
Message was edited by: Gary Sumlak

OK. A quick update.
After waiting for about 10 minutes for the rotating circle in the bottom right corner to stop, I was able to click on the "Connect As..." button. It took another 10 minutes, but the Connect As window eventual popped up. I entered the Userid and Password (saving to Keychain) and was able to see all the sharepoints on the the server. I browsed all the connected drives and folders without issue.
I then disconnected from the server. Reviewing the AFP logs on the server shows messages for the connection Login and Logout.
I then tried to reconnect to the server, and again another 10 minutes wait, although this time the Leopard client eventually connected automatically with the proper User, as per the AFP logs confirms.
Although, the client can now connect to the server, for it to take 10 minutes will be unacceptable to management, not to mention the end user. Tiger clients can connect in a couple seconds!
Is there a way to reduce the Leopard login time to, say, a couple seconds, like it does with the Tiger clients?
Again, any help or suggestions would be greatly appreciated.
Thanks
Gary

Mail no longer working after upgrade Tiger to Leopard

I know that there are some reports out there on the Internet but I can not find a solution that I trust. i upgraded from Tiger to Leopard and ever since my Mail program has completely disappeared. it is no longer in the dock, it is no longer in the applications folder and I went into the Mac Harddrive and found i. I dragged the icon on the dock and when I now start Mail the bar on top of the screen shows me that it started, but no windows come up. Under File most options are grey. i can see that all my mailboxsettings are still there. I have Entorage 2004 as my default mailprogram, but that gave never problems in the past and I use Mail for my google account. Under View in the menu almost everything is grey.
can someone help please? thanks so much.

In addition the article cited, if you ran 10.3 or earlier prior to upgrading to Tiger, once-upon-a-time, you might also need to remove two files with MessageSorting in their names.
Ernie

I have recently upgraded my iBookG4 from Tiger to Leopard 10.5.8 and find my Bluetooth USB adaptor no longer connects. The Bluetooth pane says inactive. Does Leopard require USB 2.0. I've had the adaptor for some time so may be USB 1.0

I have recently upgraded my iBookG4 from Tiger to Leopard 10.5.8 and find my Bluetooth USB adaptor no longer connects. The Bluetooth pane says inactive. Does Leopard require USB 2.0. I've had the adaptor for some time so may be USB 1.0

Bluetooth icon on menu bar shows bluetooth off. When opening bluetooth preferences it shows the devices I've connected previously,( my mobile phone), and other devices I've attempted to connect but not very successfully: my iPhone and MiniMac. The bluetooth dongle in the USB port shows a continual blue light but does not react and the iBook does not recognise that it is there. There is absolutely no reaction when I try to pair my mobile phone, which I've done successfully before upgrading to Leopard, either by the iBook or the mobile phone.
I assumed that Tiger was not bluetooth compatible with the iPhone or MacMini running SnowLeopard and hoped by upgrading to Leopard I could achieve some file transfers between the three devices (iBook, iPhone and MacMini)

I upgraded my iBook G4 from 384MBytes to 640Mbytes and upgraded from Tiger to Leopard. After a few weeks the HDD failed. New Leopard install reports: "insufficient memory". I need Tiger install disks so I can install

I upgraded my iBook G4 from 384MBytes to 640Mbytes and upgraded from Tiger to Leopard.
After a few weeks the HDD failed. I bought a new disk, installed it and trued to install Leopard, but the install fails reporting "insufficient memory".
I assume the installation requires more memory than the OS actually needs to be able to run.
I need Tiger install CD/DVD so I can install Tiger first and then upgrade to Leopard.

Call Apple Customer Support 1-800-767-2775, provide the Serial Number and specifications of the Mac, and for a reasonable fee, they will supply a replacement set of system discs (if available).
The discs will be for the original version of the OS that was pre-installed when the Mac was manufactured.
You need much more RAM than that.
Leopard system requirements:
http://support.apple.com/kb/SP517

Spotlight problem after Tiger to Leopard Upgrade

Since I upgraded my Macbook Pro 15" from Tiger to Leopard, Spotlight never worked. Initially I didn't mind too much but now I want to get it work.
I tried all suggestions I found in this forum (see list below) to no avail.
It seems Mac OS cannot index the system disk.
Any Terminal command like mdutil or mdimport have no effect and return no info. As a check, I ran the same utilities on my iMac (same Leopard version, but native) and they do in fact work as expected, as well as Spotlight. Another example: mdfind works on my iMac but return nothing on my MBP.
If I try the regular way, when I write my search string in the Spotlight window I just get nothing on my MBP.
I tried the OnyX features for Spotlight:
- Maintenance/Rebuild/Spotlight Index seems to do something, but in fact it does nothing useful
- Parameters/Spotlight/Options: Enable Indexing the Startup-Disk makes an attempt to enable it and switches immediately back to disabled. No way to keep the option checked. Also removed the Font cache from OnyX as suggested in some post - null.
Some attempts I made:
- used Disk Utility to check the disk (no repair needed)
- used Disk Utility to repair permissions: there are many that are always repaired... this makes me feel the problem might in fact be in the permission area. But after many repair the result is always null.
- added the start-up disk to the Privacy area in Spotlight Prefs, and later on removed - null
- trashed com.apple.spotlight.plist pref user prefs - a new one was created but no effect
- removed /.Spotlight-V100 from terminal - a new one was created but no effect
- used mdutil -E and -i on and off - I always get the message "/: Indexing and searching disabled"
- mdimport -L or -A or -X return nothing (on my iMac they return the list of plugins, schema etc.)
- rebooted many times also in safe mode - null
- the problem exists also for the other user on the same MBP
- tried OnyX as described above.
No effect!!
Now my question is: what can I try next ?
I'm sure there is some parameter somewhere (some .plist ?) that can re-enable Spotlight. But which one and where ?
Thanks in advance
Piero

Take a look at Spotless
http://www.fixamac.net/software/spot2/index.php
It deals mainly with Spotlight indexes, but it also contains some diagnostics - its description includes the following:
Spotless will automatically find and delete the "mds-crash-state" file from selected volumes. The file may be created if the Metadata Server crashed or was unexpectedly closed during the indexing process. The presence of this file can prevent Spotlight from indexing the volume in the future.
Spotless allows you to see exact size of the index directory on each volume.
Spotless also includes an on/off switch for Spotlight.
------------------

Do I need to backup my files when upgrading from tiger to leopard?

Not sure if I need to backup all my files before upgrading from Tiger to Leopard (to use a Mac Box Set), have bought a Seagate 1TB FreeAgent GoFlex Home hard drive to back up on. Was told I wouldn't need a WiFi router but have now discovered I would need a dual Ethernet port to be connected to the internet and the hard drive which my Mac mini only has access for one, either the internet or the hard drive. So I ask do I really need to back up before upgrading? or can you get dual Ethernet ports?

Only if your data has any value to you.
If everything works perfectly, you should lose nothing.
If anything goes wrong, it is possible to lose data.
Personally I don't want to trust my data to everything working perfectly so I back it up.
As to the question of dual ethernet ports, you don't need them actually. If you create a LAN with a router then the multiple ports on your router will allow you to connect to both the internet and disk at once.
Allam

Hi there,i have a powerbook G4 1GB,cpu speed 1.5 ghz,512KB,running panther 10.3.3.Could this be upgraded to tiger or leopard?thank you

Hi
I have a powerbook g4
1.5 ghz powerpc g4
1 gb ddr
512 kb
Is running panther 10.3.3
Could this be upgraded to tiger or leopard
Thank you

Leopard system requirements:
http://support.apple.com/kb/SP517
Leopard is no longer available from Apple. You need to look for a black retail install disk on eBay or Amazon, which will cost you around $200.

Just upgraded Tiger to Leopard. Clarisworks not supported. I can successfully convert CW4.0 doc's to AW6.0 doc's using MacLink Plus Deluxe but the problem is I than cannot print them or convert to PDF, either.

Just upgraded Tiger to Leopard. Clarisworks not supported. I can successfully convert CW4.0 doc's to AW6.0 doc's using MacLink Plus Deluxe and then work on them but the problem is that I cannot print them. Neither can I convert to PDF.

If I was trying to get someone else to do my work,
I wouldn't be posting this saying what I have said
would I? I'm not unwilling to do the work myself.From what was stated in your OP, it seemed that you
were.I'm sorry if it seemed that way. I don't want something for nothing. I've spent MANY hours, which I don't have, trying to work this out. I have hit a point where I don't think my expertise is going to solve the problem. That's why I've turned to some experts who might say something along the lines of, "Hey, I know what that is...you're compiling against... and on the Unix box, it's compiling against..." I was NOT looking for something like, "See the code below that fixes your problem."
The only problem is that I don't have direct access
to the sun unix machines I'm running the app on,
so I can't run a profiler on it. Ah, okay. So the only knowledge you have of how it
performs on those machines is from your instructor
running it and then telling you how long it took?No. I can SSH into the servers and run the program from a command line. But I wouldn't be able to install any profiler programs.
You could ask your prof to run it with -Xprof or
-Xhprof or whatever. Or you could put in a bunch of
timing statements to get a rough idea of which parts
are making it take that extra 39 minute or whatever.is -Xprof a java command line option? If so, I will look into doing that. Maybe it's available on the machines at school. Thanks for that input.

I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. going again?

I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. up and going again?

Niel...
I installed Leopard 10.5.6 and then it upgraded to 10.5.8, when I installed it I had the old info saved to a "previous systems" folder, where most of my artwork, etc. were saved, I have a one terabyte Lacie backup that unfortunately did not work as it was intended...it saved the new info and not the old. I did look into the system preferences folder and found the classic file, of course it wouldn't launch...but I have the old G 5 startup discs and will try to do it as you stated. I will try also to move it out of the previous folders file to my hard drive and see how that works.
thank you for your time and help,
Dennis

Upgrading G5 to Tiger or Leopard

Similar Messages

Maybe you are looking for