Upgrading hard drive which discs?

Want to upgrade my late 08 mbp
Which discs do I use to install the os on the new drive -- my original Leopard install discs or my snow leopard retail disc?
I would imagine my original install discs would be needed for drivers specific to my system.
What's the consensus on this?

You can use your Snow Leopard disc however the easiest way to do it is:
1. Get an enclosure for the drive and put the new disk in. When done connect to the MBP.
2. Then use Disk Utility to format the new drive as Mac OS Extended (Journaled)
3. Using Carbon Copy Cloner or SuperDuper to clone your internal drive to the new drive.
4. After this is done swap the drives i.e. put the new drive in the MBP and you can use the old drive in the enclosure and use it for a backup disk.
If you want to start clean then simply put the new drive in the machine, use Disk Utility to format from the SL disc and then install SL onto the new drive. From there you can restore your data, settings and applications from Time Machine. If you choose this route here is a tutorial that shows how to do it, it's amateurish but it works just fine.
http://www.youtube.com/watch?v=z0K-mD8rAyA&feature=related
Roger

Similar Messages

  • Upgrading Hard Drive- Which type of SATA?

    Ok, hard drive crashed last night.. 13 mos old. Seems like lots of others are having a similar problem. At any rate, I am going to upgrade, and I noticed that I have to upgrade with a 2.5" SATA connection. When I am surfing for these, I am seeing SATA, SATA-150, and I thought I saw a SATA-300. What is the difference and does it matter which one? I saw a big selection of SATA-150, but only a very few SATA. Not sure if this is one and the same?

    In theory the newer sata-150 should be backward compatible with the older sata.
    the diffrence between the two is its speed, newer sata has faster speed vs the older one.
    however, there has been feedbacks that newer sata is not compatible with g5 and other incompatibilities. On the other hand... as of this time i think they should already fix those incompatibilities so in my opinion all those you saw can be used on your macbook.

  • Ello, I changed my Imac hard drive which no longer worked. I installed a hard drive Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want

    Hello, I changed my Imac hard drive which no longer worked. I installed a hard drive
    Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want
    install OS X 10.4.2 on the hard drive, I do not see the disk. What is the problem?

    Thanks for the help
    I started on the installation CD OS X 10.4.2, I used Disk Utility
    to partition the disk according to the document that you have proposed. unfortunately
    I have not succeeded. When I partition the disk, even if I called it Macintosh HD, it
    does not keep the name and it shows disk0s3 instead. I did an erase on disk.
    When I mount the disk it tells me that I must repair. When I tried to repair, I got
    the following message:
    Volume check failed
    The underflying task reported failure on exit
    1 HFS volume checked
    1 volume could not be repaired because of an error.
    I also had a message:
    Invalid b-tree node size.
    Note: The disc is new, but it has already been formatted on a computer Imac 27 inch 2011 OS X Lion.
          I used a USB 2.0 to SATA cable to adjust the formatting.
    What to do to fix it?

  • Upgraded Hard Drive, now Combo drive wont recognize. HELP!!!!

    I upgraded my hard drive, installed the os-X (10.3.9 i think) and the cd combo worked fine, removed the combo to do somthing for the laptop (installed it in the iBook), and now when I put another combo drive (same model different drive) into the mini, the mini doesn't even recognize that there is a drive at all,
    it will take a disk, but wont eject or mount.
    what should I do?
    should I put the original drive into the mini?
    Also, i cant re-install OS-x because the optical drive wont mount in the mini, and the ibook says that It cannont use the software with the version that is installed on it (10.4.somthing)

    There isn't a BIOS in G4 Mac systems - in essence, rather than having a pre-determined configuration, the system checks for existent components at startup such that if the drive in the system was recognised and had a viable driver, it would be functional.
    First thing to do is check whether the system sees the drive at all. Go to the Apple menu and select 'About this Mac'. Then click the 'More info' button when the dialog box gives the MacOS version, processor and memory.
    The click the 'ATA' tab on the left. You should see two entries - the first being the internal hard drive which will be shown in the lower portion of the right-hand pane by model and capacity. If the combo drive is not showing there with any entry (ie, there is only one ATA device, the internal HD) then more than likely the drive is not connected correctly as Boece has suggested. If it IS listed there and correct by model number, then it may be that the drive itself is faulty or the system's power management unit isn't controlling it correctly.
    If the later is the case, a PMU reset may help. Try the following:
    - Unplug all cables from the computer, including the power cord.
    - Wait 10 seconds.
    - Plug in the power cord while simultaneously pressing and holding the power button on the back of the computer.
    - Let go of the power button.
    - Press the power button once more to start up your Mac mini.

  • After Lion upgrade Hard drive permission denied

    Hi
    I upgraded to Lion last night (from Snow Leopard) and everything seem to work perfectly. This morning I noticed that I can not save files to the root of the internal harddrive (called Macintosh HD) on my iMac. When I go to Get Info on it, my user name is not listed in the permissions list. There's System, Wheel (whatever that is?) and Everyone. I tried adding a myself or even a new user but nothing happens.
    Thankfully I can save to existing folders on my hard drive, which is stange. When I get info on these folders, my user name is listed with read and write permissions - all is normal.
    Is this some fiunky new Lion feature, or has something messed up during installation? Can I fix it?
    thanks

    This seems to be a feature - despite the permissions indicating that I can read and write to the root folder of the start-up disk, I have to authenticate before copying files to it.
    I 'restored' the internal HD to an external drive as a backup using Disk Utility, and that too was locked - it booted-up OK and worked exactly like the internal HD when it was the start-up disk. However, booting-up gain from the internal HD I found that I could not copy any files to the external disk at all, not even to the folders in my cloned home folder - I don't even get the option to authenticate.
    When I replaced the backup using Carbon Copy Cloner the external drive was not locked and I can copy other back-up files to the disk.
    The locking seems to be a feature of the install/restore. I would guess that, as with hiding the ~\Library folder, this is designed to protect critical folders from foolish acts, but it seems like overkill to me.

  • I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down eliminate

    I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down menu with the gear box symbol to eliminate

    I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
    You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots.  Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
    See Pondini's page for more explanation:   What are Local Snapshots?   http://pondini.org/TM/FAQ.html
    I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
    You have tested the library on the external drive, and so your photos are save there.  
    The local TimeMachine snapshot probably now contains a backup of the moved library.  Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

  • I have a new MAcBook Air and my photos don't fit on the internal hard drive.  I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto.  How do I set an external hard drive as the default drive?

    I have a new MAcBook Air and my photos don't fit on the internal hard drive.  I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto.  How do I set an external hard drive as the default drive in Iphoto?

    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • I just downloaded Yosemite and all my iPhotos have disappeared! I tried importing them from the photo library but it said there wasn't enough space on my hard drive which is rubbish, because they were there before. How do I get them back to iPhoto?

    I just downloaded Yosemite and all my iPhotos have disappeared! I tried importing them from the photo library but it said there wasn't enough space on my hard drive which is rubbish, because they were there before. How do I get them back to iPhoto?

    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • I bought a new external hard drive for backups, but time machine won't do a full back up.  I think it is remembering backing up onto previous external hard drives, which I don't own anymore.  How do I do a new full backup?

    I bought a new external hard drive for backups, but time machine won't do a full back up. 
    I think it is remembering backing up onto previous external hard drives, which I don't own anymore.  How do I do a new full backup?
    When I bought the new (used) iMac, I also bought an external hard drive for backups.  It worked fine, but my husband stole it.
    Then I bought a new external hard drive (Seagate) and it worked fine for three weeks, then died.
    So I just got a new external hard drive, which was put together from an internal hard drive and a hard drive enclosure. 
    Time machine did the first backup today, and it should have taken 9 hours like it did on the previous first time full back up.  Instead, it took 30 minutes.  That can't be right.  I want to start over and do a full backup to make sure everything gets onto my new external hard drive, but I can't figure out how to do that.  Please help.

    Triple-click anywhere in the line below to select it:
    tmutil compare -E
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
    Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
    Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
    Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
    At the end of the output, you’ll get some lines like the following:
    Added:
    Removed:
    Changed:
    These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

  • ITunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible

    I have my iTunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible

    You can't connect directly to the external drive, but should be able to use iTunes Home Sharing via the laptop.
    http://support.apple.com/kb/PH1453

  • My external hard drive which contained all mu music has failed.  How do i create a new itunes library with the music on my iphone?

    I had all my music on an external hard drive which itunes referred to as the stored location.   this drive has now died and I only have the music on my iphone/ipad.  How do I recreate my music on another external drive using the music on my iphone/ipad?

    Have you failed to maintain a backup copy?
    If so, not good, you can transfer itunes purchases from the iphone: File>Devices>Transfer Purchases
    You may be able to purchase a third party program to get the rest ( not supported by Apple).

  • Can i use my time capsule to wirelessly backup my macbook and its external hard drive, which up until now was it's time machine and storage? How?

    Can i use my time capsule to wirelessly backup my macbook and its external hard drive, which up until now was it's time machine and storage? How?

    The external drive must be connected to the Mac using either USB or FireWire
    You must remove the external hard drive from the list of items that are "excluded" from backups in Time Machine Preferences.
    Here's how:
    Open System Preferences (gear icon on the dock)
    Open Time Machine
    Click Options
    Look for the name of the hard drive in the list of "excluded" items and click on it to highlight it
    Click the -- (minus) button at the bottom of the list to remove the hard drive from the list of "excluded" items....so it will now be backed up
    Strongly recommend that you do the first backup using Ethenret from your computer to the Time Capsule since the entire contents of the external drive will be copied on the first pass. Ethernet will be 3-5 faster than wireless.
    Once you have the first backup done, you can use wireless for subsequent backups since they will nornally be much smaller....unless you add large files to the external drive.

  • External hard drive which used to be recognised by my new iMac is no longer being recognised?

    I recently bought an iMac. I have an external hard drive which was formatted to my old MacBook Pro. Initially it worked fine on my new iMac, but all of a sudden it is not being recognised by it. Any ideas what I can do?

    The drive is probably probably starved for power. As electric motors age, they can demand more power. Get a powered USB hub and I suspect your problems will go away.
    If you purchase another hard drive for a desktop Mac in the future, consider one that is self-powered. Much less troublesome.
    Some people have reported that, if they reformatted the external drive for Mac (most are formatted for Windows), the existing drive may work without a hub. You can refomat the drive with Disk Utility. Select Macinstosh Extended (Journaled) as the format. This is a great strategy if you do not have to share the drive with a Windows computer.

  • New MacBook pro how do I add external hard drive which has my entire iTunes library on it. Do I just drag external drive icon into iTunes preference box that shows where new itunes library is now located ie. On the MacBook pro.

    how do I add external hard drive which contains my entire iTunes library to new MacBook Pro. i want to keep iTunes library on external hard drive. But I want all my iTunes information:  artist, songs, albums, playlists on my new MacBook Pro.  I know about going to iTunes preferences- advanced-itunes media folder location.  At this point I don't know what to do   Do I drag external icon into iTunes media folder location box. I want to keep music files on external hard drive. I don't want to use macbook pro memory for my very large music files.

    I will request that your query be relocated to the iPhoto forum where knowledgeable iPhoto users will be able to assist you.
    Ciao.

  • HT201514 Trying to back up Time Machine to My Passport Air external hard drive, which is supposed to be compatible with my iMac and Mountain Lion, but get the message: Unable to complete backup.  An error occurred while creating the backup folder.  Help!

    Hello, I've just bought a Mac compatible Passport Air external hard drive, which is supposed to be compatible with the OS I am using (Mountain Lion) but I keep getting an error message saying Unable to complete backup.  An error occurred while creting the backup folder.  I've tried all the help suggestions, but nothing with this actual message comes up - it appears to be partititioned correctly etc, so don't know what I'm doing wrong - any help would be greatly appreciated thank you.

    Were you not plugged in via USB to begin with?
    I would recommend performing some resets just to be on the safe side. Unplug the external HD, and try these steps:
    http://support.apple.com/kb/HT3964
    http://support.apple.com/kb/HT1379

Maybe you are looking for