Upgrading Hyperion 9.3.1 to 11.1.2.1 in the Existing Server.

Hi All,
I am in need of your valuable suggestions. We are in process of upgrading Hyperion 9.3.1 to 11.1.2.1 in the existing server. I have got only 2 environments namely Dev & Prod. So I have to do everything in one server only to upgrade to ensure its working. Currently we have got Shared Services, HFM (EPM application not Classic), Workspace,Hyperion Performance Management Architect,FR & Web Analysis & FDM in 9.3.1 version.I know first i need to upgrade from 9.3.1 to 9.3.3 and then to 11.1.2.1.My question is that after successful upgrade to 9.3.3 how i am going to upgrade to 11.1.2.1 in the same server. i was informed by oracle to create a new Drive in the server and there you can install & configure it. I have few questions
* How the shared services will be upgraded. Do i need to point it to the existing (9.3.3) database.If Yes, will it work as i can't roll back.
*I read that in 11.1.2.1 there is a Utility HSSMIGRATE.BAT which we are supposed to run and it will create a ZIP which need to point during the 11.1.2.1
configuration. I am not sure whether its going to work or not.
* Have also read if there is Performance Management Architect then there are certain activities which need to be carried out.
* What Back should i take?
* How to upgrade HFM from 9.3.1 to 9.3.3 to 11.1.2.1
* Read that FDM need to be deleted if you want to upgrade it to 9.3.3 from 9.3.1 and then again reinstall it for 11.1.2.1.Please suggest how to go about it.
Please suggest if there can be any other approach also.Can any one tell for shared services can it be possible that i export the security through CSSEXPORTUTILITY in 9.3.3. Shared Services and then Import it back in 11.1.2.1.Would request you to provide me as much information as you can.
Thanks in Advance.

Answers:
* How the shared services will be upgraded. Do i need to point it to the existing (9.3.3) database.If Yes, will it work as i can't roll back.
1.After installation of 11.1.2.1,you will have to run configuration utility and point to existing database which will upgrade HSS.The hssmigrate utility will provide a zip file which should be used as well.The configuration utility will have option to "import data from earlier release"
*I read that in 11.1.2.1 there is a Utility HSSMIGRATE.BAT which we are supposed to run and it will create a ZIP which need to point during the 11.1.2.1
configuration. I am not sure whether its going to work or not.
2.Refer (1).The utility is tested and supported so should work from you also.If having problems then get in touch with Oracle support.
* What Back should i take?
3.Every thing ----repository,filesystem etc.
You can refer to backup and recovery guide which should have what to be backedup for each component.
* How to upgrade HFM from 9.3.1 to 9.3.3 to 11.1.2.1
Refer (1)
Hope this helps

Similar Messages

I am getting notifications for a Firefox upgrade, but when I attempt to download the upgrade all that happens is a continous message about "Connecting to the update server". It never actually connects.

I get a notification that a Firefox upgrade, to rel 6.02 is available. When I select the option to download the upgrade, I get a message "Connecting to the update server", but it never starts the download.

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

Upgraded to Mountain Lion and Can't Get Calendar to sync with Exchange server

Just upgraded to Mountain Lion and my Calendar refuses to sync with the Exchange server. Events deleted on the web interface dont show up on my Air Calendar. Any thoughts on this?

Discussions of jailbreaking are not allowed here, so I'd suggest avoiding the topic or you risk having your posts removed by the Hosts.

Upgrading Hyperion applications from EPM System 11.1.2.1 and 11.1.2.2. to 11.1.2.3

Hi,
I am triyng to upgrade Hyperion classic applications from 11.1.2.1 and 11.1.2.2 to 11.1.2.3. I restored application's databases which has SQL database and upgraded applications successfully. But the other applications that have Oracle databases, I can restore and upgrade the applications, but when I try to refresh database, it gives errors like that:
com.hyperion.planning.olap.HspVerifyOutlineException: Verify Outline failed with the following errors:
Error [100000800] detected in member "2012 Bakım": Shared member with no actual member
And it is only giving these errors for members which have Turkish characters. And it gives like as this error for member formulas which have Turkish characters:
Error compiling formula for [] (line 1): unknown member name ["Sözleşme Türü Belirle"] in function [operator @X]
This application is working in 11.1.2.1, but after I migrated it ot 11.1.2.3, it started to give these problems. I controlled my oracle database parameters and they look OK, I am sending them too:
NLS_LANGUAGE                   AMERICAN
NLS_TERRITORY                  AMERICA
NLS_CHARACTERSET               AL32UTF8
NLS_SORT                       BINARY
How can I solve this problem ?
Thanks
Mehmet

Hi Santy,
Thanks for your suggestion. We updated Turkish characters in DB then it's solved. When we create a shared member which has Turkish characters from zero, it gives no error while the refresh. And if we delete all shared members and create them again, it gives no error again. I think the problem is about upgrading.
Regards,
Mehmet

Upgrade Hyperion Enterprise 6.2 to 6.5

Hi,
We want to upgrade Hyperion Enterprise from version 6.2.1 to version 6.5.1 so I wanted to know if there is any document document and if there are do's and don'ts for the same. Will there be any functionality that will not be working in this case ???
Thanks,
--XAT

Hi,
I would suggest you to apply the latest patch 6.5.1.1.103, and I would strongly recommend you to upgrade to HFM.
Hyperion Enterprise and Hyperion Enterprise Reporting Statement of Direction (Doc ID 1396504.1)
Hope this helps,
Thank you,
Charles Babu J

Upgrade Hyperion system components from 9.2.0.2 to 11.1.1.3

can anyone please provide upgrade approach from 9.2.0.2 to 11.1.1.3 and also can anyone please tell me whether we can move applications across 32 bit and 64 bit platforms directly.
i mean can we copy a 32 bit server planning application to 64 bit planning application.(provided database can be on 32 or 64 bit binaries)
to upgrade hyperion to 11.1.1.3 can we apply a service pack of 9.2.0.3 and go for an upgrade of 11.1.1.3 is this a correct approach.if this is correct can anyone please say how we can apply a service pack is just the installtion file we have to run for each product?
Thanks is Advance your help is much appreciated!!!
Thanks and Regards
Mahesh

Hi Jhon,
Thanks for the Quick response!!
But from oracle recemmonded upgrade paths 9.2.0.2 is not a supported version, so can i do a fresh install of 11.1.1.3 and migrate the applications from 9.2.0.2
will the applications still work if we migrate in the above meniotned approach?
please give me your sugesstions on moving applications across 32 and 64 bit platforms. can we copy a 32 bit server to a 64 bit server planning application.
please let me know
Thanks in advance
Best regards
Mahesh

Upgrade Hyperion Essbase 7.1.3 to 9.3.1.2

Upgrade Hyperion Essbase 7.1.3 to 9.3.1.2
1. (BSO/ASO/attributes, security, report scripts, partitions)
2. (load rules, calcs, security) (ASO and IRB extracts, Reports, Batches - custom or new in Reports, custom web forms)
3) (EIS testing)
Migrate all above essbase applications from Prd to Dev boxes, including:
l Outline,
l Calc scripts,
l Reports scripts,
l Load rules,
l Subsitution variables,
l Partitions,
l Related shell/Maxl scripts,
l Data
l Sample user security
l Filter.
In addition, for Collect, we also need migrate all objects EIS related, including OLAP model, metadata outline, drill-through setting and others.

First you should make sure that you run the most recent version of Leopard, or even consider to upgrade to Snow Leopard. Then just Install Logic 9 either over Logic 7 or from scratch, both works well. You should not install LP 8 first.
Cheers,
Jazz

Upgrade hyperion from 2.2 to 3.3

are there any issues in upgrading hyperion planning from 2.2 to 3.3 ?Is there any upgrade checklist which is available ? Can somebody send me one. my email is [email protected] Thanks

It has been covered on here, you migrate the planning applications relational database, create a blank application on 11.1.2.1, stop planning, copy the relational db from 9.3 over the top of the blank 11.1.2.1 (if it is Oracle you may need to drop the schema/recreate then import). start up planning, upgrade planning application by logging in.
Those were the high level steps, it has been covered on here lots of times.
Cheers
John
http://john-goodwin.blogspot.com/

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help?

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????

Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X.

After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours. Help!

After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours.
I tried quitting and starting again but it just jumps back to the same spot.

It is quite large, but I have tried two of the fixes suggested and things now seem to be moving along.
(I was unable to seach properly before which is why I posted the question - it was a bit of a panic)

Excise is not flowing in the existing GR after system upgradation

Hi Gurus,
We have recently upgraded our system from 4.7 to ECC6 with patch level
9. Here Tax codes are not working for the POs already existing in the
sytem before Upgrade.At the time of Partial GR the excise is not
flowing in MIGO. The taxes tab is also not flowing the tax details in
the PO in invoice tab. We are unable to make those partial GR. But POs
being made after upgradation are having no problems with any of the
existing Tax Codes. All the Tax Codes are found working all right for
them.
Kindy help us how can we solve the issue immediately as it is very
urgent to us.
Thanks & Regards,
Sumanta

Edited by: Jeyakanthan A on Sep 13, 2011 3:57 PM

After upgrading to Yosemite, my Exchange calendar no longer syncs to iCal (the Apple calendar). Help?

After upgrading to Yosemite, my Exchange calendar no longer syncs to iCal (the Apple calendar). Help?

That's not the point.    Before iCloud, Outlook synched with Apple Calendar and/or iCal.    With iCloud, Cal syncs with iPhone and other devices.     Outlook doesn't have to sync with iCloud (although that would certainly be nice).   It just has to continue to sync with Cal, which in turn syncs with devices via iCloud.
But for some inane reason, it doesn't.    If this is Apple's way of forcing people to not use Office and only use Calendar and Apple Mail, they are going to stop the gains they've made in business environments.   Businesses, especially large businesses, use Outlook.   End of story.
Furthermore, Apple's instructions for setting up or deleting iCal and iCloud accounts is complete gibberish. And I'm a tech who has been working with computers for 32 years.   Apple used to be great at making things easy. They now suck at it and are just as bad as Microsoft.

After upgrading to Lion, Preview (5.2.2) appears to have lost the facility to run a slide show by using my mouse to click an icon in the visible menu bar, as I could in the previous version. Can I retrieve that icon and thus that facility?

After upgrading to Lion, Preview (5.2.2) appears to have lost the facility to run a slide show by using my mouse to click an icon in the visible menu bar, as I could in the previous version. Can I retrieve that icon and thus that facility?

Unfortunately not. Lion has made many adjustments to the previous system. Try opening your pdfs in keynote.

After upgrading to Mountain Lion, when I reply to an email from the Global Inbox it incorrectly selects the reply to address.

Ok, since upgrading to Mountain Lion, when I reply to an email from the Global Inbox it incorrectly selects just my main business email account, even if the email was sent to a completely different persoanl address. This use to work without issue in Lion. I have at least a half dozen accounts that all come into the "Global Inbox" and I never worried about what account I was replying from as it always matched the account the email was originally sent to.
Now in Mountain Lion, this is broken and no matter what email I select it defaults to my main account and I have to remember to manually select the proper reply address from the drop down menu. So far the only way to avoid this is the keep all the separate account Inboxes showing and then selecting the account that I want to view. Then when I repy it is to the correct address, but having to do this makes the "Global Inbox" view completely worthless! If I have to select teh correct Inbox to get the proper reply address every time then what is the point of having a Global View?
Why did you break this Apple?

Hello,
When you compose a message right click on the attachement and choose "View as Icon".
I know there was a Terminal command to set all attachements as icons by default but never tried it :
- You can also use the Terminal (in your Applications folder > Utilities) quit Mail, and type in the Terminal :
defaults write com.apple.mail DisableInlineAttachmentViewing -boolean yes
- To restore the original settings type :
defaults write com.apple.mail DisableInlineAttachmentViewing -boolean no
(source)
Hope this will help.

I cannot find my iPhoto upgrader in Finder...I was told to go to the Go menu and click on Utilities...this is not an offered option...and nothing comes up in the search box...

I cannot find my iPhoto upgrader in Finder...I was told to go to the Go menu and click on Utilities...this is not an offered option...and nothing comes up in the search box...I have upgraded to OS X Yosemite, downloaded the iPhoto app to go with it, and the iPhoto upgrader...just can't find the upgrader...

In the finder applications folder ==> Utilities -- double click the iphoto library upgrader and then launch iphoto 9.6.1
iPhoto '11 or later: About the Library Upgrader - Apple Support

Upgrading Hyperion 9.3.1 to 11.1.2.1 in the Existing Server.

Similar Messages

Maybe you are looking for