Upgrading ICM 7.2(5) to 7.5
Hi,
Please help, we are planning to upgrade ICM 7.2(5) to 7.5, however, I am not getting the Compatibility sheet on Cisco site, whether direct upgrade is possible to 7.5, also, on which version of CVP, ICM 7.5 would be compatible.
Thanks,
NS.
You can certainly upgrade from 7.2(x) to 7.5(x). I recently upgraded a large customer from 7.2(7) to 7.5(9). This was CVP 7.0(2).
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/ipcc_enterprise/compatibility_matrix/ipcccompat.pdf
(Jan 20, 2011)
Regards,
Geoff
Similar Messages
-
Error Upgrading ICM from 7.2.4 to 8.5.2 on Windows 2008 R2
Hi,
I am trying to upgrade from ICM 7.2.4 to ICM 8.5.2 on Windows 2008 R2 in lab. I am using the following procedure.
Old system
Domain controller Windows 2003
Sprawler Windows 2003 ( Icm 7.2.4)
New System
Domain Controller Windows 2008 R2 Standard Edition
Sprawler Windows 2008 R2 Standard Edition (SQL 2005 with SP4)
Taking the registry backup of the old system using registry utility.
Running the EDMT tool on the new 2008 Sprawler machine for technology refresh.
Running the ICM installer for Technology Refresh and selecting the registry and ICM patch (8.5.2)
System finishes the setup without any error and after reboot tries to install the patch.
At this point I get the attached error.
Has anyone faced such error while upgrading.
Regards,
AmirHi Amir,
As per the attached screenshot, it prompts out that your system has not went through the MR of 8.0. I suspect that you cannot upgrade your version from 7.2.4 directly to 8.5. Instead you would need to upgrade yur current version to 8.0 and from 8.0 you can upgrade to 8.5
Hope this helps!!!
Cheers,
Dass
Please rate useful posts -
We are planning to upgrade ICM from 7.2 to 8.0
Wanted to checkout couple of things
1. What is the procedure for exporting all Configurations and Scripts.
Is taking backup using ICMDBA and Importing it sufficient enough for both Config data and Scripts
2. What is the procedure for exporting data for all the Tables (TCD,RCD etc)
Thanks
AlokEverything is migrated with the EDMT tool. Review the planning guide in detail:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/ipcc_enterprise/ipccenterprise8_0_1/installation/guide/icm80preinstall.pdf
and the upgrade guide:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/ipcc_enterprise/ipccenterprise8_0_1/installation/guide/icm80ug.pdf
HTH,
Chris -
Passing ICM Call Variable info to CAD not working
Hello,
we are running UCCE 7.2(7) with CAD 7.2(1) SR2 and we seem to be having an issue with the ICM Call Variable information being populated in the CAD.
Up until now, it's been working fine. We have our ICM scripts set ICM Call Variables 1, 2 and 3 and they all appear in the CAD when a call goes to an agent. But, just this morning, I added a new DN, mapped it to a scheduled script, and within that script I set that new DN (just like I've been doing with all the rest so far), set a Call Type, then call 'Go To Script' which is the actual script to handle that specific call.
Dialling that DN plays the correct script, and going into the Sales queue sends me to that agent, but no ICM Call Variable info is showing up.
So far this has been working, but now that I've added a new line, it appears to have stopped, but just for this new line, it still appears to be working for all existing lines.
Any ideas anyone?Geoff,
we just have one Layout (default) listed in Enterprise Configuration - Enterprise Data in the Desktop Admin. The fields in this default Layout did not include any of the ICM Call Variables, so we added a few of them (that we set in ICM scripts). Up until now, these have been showing up in CAD when calls to skill groups come through. It's just now that I've added a new DN and ICM script, they are not showing up for that script only. The ICM Call Vars are working for all other DNs in the system, just not this new one.
Just to let you know, we upgraded ICM and CTIOS from 7.1(5) to 7.2(7) just recently, and with that we installed CAD 7.2(1) with SRs 1 and 2.
This is the 1'st time I've added a new line (DN) and ICM script to the system since that upgrade, so could that have something to do with this?
Also, there is a post where someone had this same issue (https://supportforums.cisco.com/message/1053394#1053394) and it was suggested that they shutdown and restart the CAD Services to resolve this.
My question is what services are in fact the CAD services? I would like to try that after hours tonight to see if that resolves this issue.
I verified via CAD that I'm running Build 7.2.1.200
Any other suggestions? -
CAD agent detail real-time display
UCCE with CAD:
When agents show their statistics in the CAD window, and select Agent Detail Real-Time Display - the Avg Talking field is showing the same number for ALL agents. For example, each agent shows a value of 2:26 for Avg Talking. It would seem to me that this field should be specific to each individual agent, and not an average of all agents in the skill group. The Cisco CAD User Manual shows Avg Talking to be "The total time on calls (all talk time + all hold time) divided by the number of calls"
The other fields, i.e. calls presented, calls handled, etc, are specific to the individual agent and show different values as I would expect.
Am I mis-reading the documentation (which is entirely possible)? Has anyone else seen this?
Thanks,
RobbHi Robb,
Found my old TAC Case. It was for an upgrade from 7.2.5 to 7.5.6 so you might be hitting a similar issue. This is the email of the escalation from Cisco to Calabrio for the issue I had if it helps when you talk to TAC:
Problem Description:
Detailed Description
Upgraded ICM from 7.2.5 to 7.5.8 (CAD 7.5.6), after upgrade, CAD realtime
display report "Agent ACD State Log Display" start time shows a start time of 00:00:03
against every state change
Business Impact
medium:Could not see the Agent login time correctly
Troubleshooting Performed
Similar case:
http://wwwin-tools.cisco.com/casekwery/getServiceRequest.do?id=613948701#not
e48
However, the fix is
actually to go into the LDAP utility and do a hack to a certain key
within the database. Unfortunately the previous case doesn't tell which
key to edit and what to change it to. I'm presuming it had something to
do with the time zone from a mention earlier on within that case, but
not sure.
No bugs found related to the issue.
Specific Assistance Required
Need assistance to fix the issue with ACD State Log Display
Cheers,
Nathan -
Upgrade from ICM 6 to 7 (TR) -- Domain conversion tool / UMT
Hi, we are currently upgrading from 6 to 7.0 and subsequently to 7.5 (TR, new hardware, new domain, new instance). So far we've staged our W2k3 domain and all the other soon to be ICM servers.
I'm currently trying to migrate the domain users and it tells me that I need to use the Domain Conversion Tool to go migrate the domain users from 6 to 7. (Staging guide chpter 4)
I can't find any documentation on the Domain Conversion Tool, when I run the executable I can see the different triggers (below) but that's it.
I've done an export and gotten a file but what next?
Do I do a convert now?
is the convert going to change my production database?
I'm also reading that the Domain Conversion Tool was replaced by the UMT (for 7.0 to 7.+).
Or should I now use the UMT and point it to my export file?
Im afraid to run the convert and and messing up my Rogger sideA database?
Has anybody use this tool?
any tips and or documentation is appreciated. Thanks
D:\ciscoutils\domainCnvTool>domcvt
The syntax of this command is:
DomCvt.exe /DB:dbname /F:filename /M:mode [/OD:old domain name]
[/ND:new domain name][/P:password]
/DB:dbname Specifies the database name to operate on (e.g. cust1_sideA)
/F:filename Specifies the full path of the file to import or export to
/M:mode Indicates export mode or convert mode
E Export mode
C Convert mode
The following switches are only needed in Convert Mode:
/OD:old domain name Specifies the old domain name to convert from in NetBIOS form (e.g. MyDomain)
/ND:new domain name Specifies the new domain name to convert to in NetBIOS form (e.g. MyDomain) or DNS form (e.g. MyDomain.mycompany.com)
/P:password Specifies the default password to be set for all the users in the new domain
Use quotation marks when there are spaces in the file name or passwordHi,
From the 7.x(y) Staging Guide:
Common Steps Required before Migrating any ICM ComponentOn the Domain Controllers:
Confirm that Domain Controllers have been upgraded from NT Domain to Windows 2000Active DirectoryOn the CallRouter Server:
\RouterA\Router\CurrentVersion\Configuration\Global\DBMaintenance.
Note:
If moving a CICM with SideA and SideB disable the Configuration changes on bothsides.
On the Logger server:
Copy the Domain Conversion Tool (DomCvt.exe) from the ICM 5.0(0) or ICM 6.0(0) Third-PartyTools CD as applicable (Domain Conversion Utility folder) onto the Logger server.
Export the ICM user list using the DomCvt tool using the following command:
domcvt /DB:<instancename>_sideA /F:c:\DomConvert\userlist.txt /M:E.
And then lower down in the guide:
On the Logger server:
Step 18
Run the Domain Conversion Tool to convert the ICM users exported earlier, using the followingcommand:
domcvt /DB: <instance_name>_sideA /F:c:\DomConvert\userlist.txt /M:C /OD:<old_domain_netbios_name> /ND: <new_domain_netbios_name>Note: You can use the /p option to create a global password. If you do not use the /p option,the password is reset to null.
I'm looking to run this myself shortly. The only caveat with this info is that its extracted from the section related to ICM5 and migration from multiple to single forest ... so possibly not the correct info. However, there's not much documentation on this as you've seen!
Jed -
After upgrade to 12.1.3, ICM is not started successfully
Hi experts,
After upgrade to 12.1.3, a weird problem related to Internal Concurrent Manager(ICM) occurred and i can't fix
it by searching this forum.
Normally when i start EBS apps tier, i use script adcmctl.sh to start ICM and it exits with status 0 which means
it's ok. However when i try to submit a concurrent request, it prompts that "no active manager". So i run the command
./adcmctl.sh start apps/pwdThis command also exits with status 0 and ICM is brought up successfully. Now here is my question, why ICM is NOT started
successfully when i try to start the apps tier while it succeeds at this time. Under these two circumstances, the same script
is applied.
Thanks,
TedTed xu wrote:
hi,
I see there is no error message in those CM log files. Only thing that is suspicious is found in VIS_1009.mgr(VIS is my ORACLE SID):
Found dead process: spid=(32609), cpid=(2033664), Service Instance=(1095)
Found dead process: spid=(32600), cpid=(2033661), Service Instance=(2158)
Found dead process: spid=(32595), cpid=(2033660), Service Instance=(31528)
Please see these docs.
Concurrent Managers Will Not Start ORACLE error 60 in insert_fcp [ID 1256084.1]
Why Are Dead Process Found In The Standard Manager Log File? [ID 246584.1]
Thanks,
Hussein -
I'm trying to upgrade one of my lab ICMs from 8.0.1 to 8.5, and the upgrade fails each time complaining of a running executable. The install log shows the following DLLs locked:
Locked file: C:\icm\bin\CampaignManagerPerf.dll
Locked file: C:\icm\bin\CTISVRPerfmonObjectDLL.dll
Locked file: C:\icm\bin\DialerPerf.dll
Locked file: C:\icm\bin\EapimPerfCounters.dll
Locked file: C:\icm\bin\ImportPerf.dll
Locked file: C:\icm\bin\LoggerPerf.dll
Locked file: C:\icm\bin\OPCPerfmonObjectDLL.dll
Locked file: C:\icm\bin\RealTimePerf.dll
Locked file: C:\icm\bin\VRUPIMPerfCounterDLL.dll
Found a similar thread here which indicated that the SNMP service was the culprit, but in my case, all efforts to start/stop/manual/disable the SNMP service have no effect on the error. Is there any other service that can lock these DLLs? There is no third party software on this box, and I ran an identical upgrade on it's paired server which ran flawlessly. Attached is a screenshot of all active services on the problem host.You can also use the process explorer, to find out which process is blocking that dll,
For your reference below the link to download
http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
Once you install it in the menu options click find Find handle or Dll enter the dll name
and search it will show you what process is using that dll kill the process and run the
install. -
Any idea on approximate upgrade for CM, unity, ICM and CVP
Looking for some basic numbers. CM 4.x to current, IPCC 7.0 to current CVP 2 version back.
Is this some thing doable by inhouse staff? any upgrade documents or its not really recomended?
Any vendors in midwest you can recommend?
Thanks,
Baseer.I've never really been involved 100% in an upgrade project, we have a team dedicated for that in my company. However, I think it's usually 4-6 weeks, depending on the scope. The main thing to take into account is, #1 licensing, ensure you have all the proper licensing ASAP. #2 hardware, for example, CVP has greatly improved their port density in later versions which allows you the opportunity to remove some servers from the solution. #3 upgrade process, you can do a concurrent upgrade, where you're running two version at one point and can only upgrade one piece at a time, this process usually takes longer, but provides virtually no down time. eLoyalty (my employer) has a pretty big presence in the Midwest in case you're interested.
david -
Hi All,
We are developing a BW Upgrade Tool. A part of which gives information about System Landscape that may be useful before or after upgrade for a Basis Consultant. Following information is obtained as a output of the tool. So could you please glance through it & tell me is this information is relevent and what more should be there?
As I'm a BW consultant I have very little knowlege of Basis.
System status overview
SAP version 640
operating system Windows NT
machine type 2x Intel 801586 (Mod 2 Step 7)
node name SAPBL5
SAP system id 560
database system ORACLE
database name BL5
database host SAPBL5
database owner SAPBL5
rsyn
IP address 172.25.8.121
kernel release 640
database library OCI_920_SHARE
kernel compiled NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10 Aug 21 2005 23
kernel patch level 87
supported SAP vers. 610, 620, 630, 640
supported database ORACLE 8.1.7.., ORACLE 9.2.0.., ORACLE 10.1.0..
valid OP system Windows NT 5.0, Windows NT 5.1, Windows NT 5.2
OP system release 5.0
ABAP load version 1521
CUA load version 15
kernel kind opt
relinfo valid
hot package level 13
Oracle
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE 9.2.0.6.0 Production
TNS for 32-bit Windows: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
disp+work information
kernel release 640
kernel make variant 640_REL
DBMS client library OCI_920_SHARE
DBSL shared library version 640.00
compiled on NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10
compilation mode Non-Unicode
compile time Aug 21 2005 23:40:31
update level 0
patch number 87
source id 0.087
supported environment
database (SAP, table SVERS) 610
620
630
640
DBMS server
ORACLE 8.1.7..
ORACLE 9.2.0..
ORACLE 10.1.0..
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
disp+work patch information
( 0.001) Strings in Inputfields cut off (note 676835)
( 0.001) Block insert not stable (note 699411)
( 0.001) Sending the SAP logon ticket to SAPJ2EE server (note 691253)
( 0.001) TPDA: Exclusive DBG Session Fix (note 698737)
( 0.001) SNC-enabled RFC connections (type 3) to unicode systems (note 695205)
( 0.001) Loop where with move of C field to N field (note 699528)
( 0.001) Multiple instances of same subscreen and f4 ocx (note 698564)
( 0.001) ABAP Unit: Support for calling private fixture methods (note 690059)
( 0.001) Bidi printing patch collection (note 353987)
( 0.001) Problems while debugging a dynpro (flow logic) (note 689633)
( 0.001) Sending the SAP logon ticket to SAPJ2EE server (note 691253)
( 0.001) SQL Trace: fix error in program name filter (note 697685)
( 0.001) Dynamic Invoke Class Constants Defaults (note 701926)
( 0.001) Empty title + varying line size (note 671796)
( 0.001) RTM/AAB logging inside HTTP request (note 687116)
( 0.001) Assertions/BPs: core during RFC (note 700868)
( 0.001) ITS ToolBar: toggle button state, get icon name (note 673134)
( 0.001) Implicit default table parameters (note 700146)
( 0.001) Ignore HTTP-server requests during ITS-processing (note 700871)
( 0.001) Kernel Methods: signature of c-macros changed (note 703161)
( 0.001) Dynamic Invoke Abstract Inherited Implemented (note 703413)
( 0.002) CST patch collection 50 2003 (note 687395)
( 0.002) TPDA: patch collection (note 703735)
( 0.002) LOOP ... WHERE memory leak (note 703397)
( 0.002) RUNT_ILLEGAL_SWITCH during garbage collection (note 702442)
( 0.002) Some errors in the debugger with special fieldnames (note 704384)
( 0.002) CALL TRANSFORMATION exceptions (note 701467)
( 0.002) HTML Escaping of ICF error documents (note 626073)
( 0.002) HTTP/External Debugging for RFC (III) (note 668256)
( 0.002) JavaScript: enhance roll ability in double hash code (note 703026)
( 0.002) Do not enter memcpyRChk during Cache reorg. (note 447519)
( 0.002) Dynamic types: get_components hat non unqiue ids (note 703020)
( 0.002) ST: initialize result STRING (note 703615)
( 0.002) Open SQL: joining tables w/ and w/o client (note 703710)
( 0.002) Output error by WRITE (*) using conversion exits (note 677893)
( 0.002) Avoid invocation of garbage collector in certain cases (note 704554)
( 0.002) ST: Load Size (note 705269)
( 0.002) Allocation strategy in ABAP shared objects (note 705956)
( 0.003) Correction of design error in Secure Storage (note 702647)
( 0.003) Unjustified syntax error when SETUP, TEARDOWN (note 705308)
( 0.003) Incoming UTF-8 RFC use UTF-8, not non-Unicode (note 647495)
( 0.003) ICU shared libraries upgrade (note 519753)
( 0.003) Sapdext: prevent loop of rabax DYNPRO_SAPDEXT_LOOP (note 703374)
( 0.003) Oracle multibyte codepage: Incorrect LIKE evaluation (note 695899)
( 0.003) Downward compatibility of table statistics (note 707005)
( 0.004) Correctly adapt occu of RTTI tables (note 707619)
( 0.004) AAB: truncated subkey values (note 708269)
( 0.004) Dbbuf: avoid deadlocks in export/import buffer (note 496511)
( 0.004) ST: no deserialization map (note 708597)
( 0.004) ITS TextEdit: selection functions improved (note 669904)
( 0.004) ITS TextEdit: new textstream interface (note 695802)
( 0.005) Memory in tmpfs is not released correctly (note 706071)
( 0.005) CST patch collection 09 2004 (note 708621)
( 0.005) CCMS: agent cannot monitor standalone enqueue server (note 694057)
( 0.005) Wrong Fido entries (note 708789)
( 0.005) ST: Apply in Loop (note 710150)
( 0.005) ST: xml header (note 708787)
( 0.005) UTF-8 writer; default namespace; lang(); external options (note 709649)
( 0.005) IMPORT: lang key handling (note 512518)
( 0.005) HashTab SHO-Read MoveToFront-Heuristik (note 707891)
( 0.005) Avoid shortdump DEBUGGER_ILLEGAL_VALUE in abDbgDisVar (note 708356)
( 0.005) Making RFC calls with an empty password (note 662390)
( 0.005) SYSTEM_CORE_DUMPED in addIDENT (gen/scsymbc.c) (note 685625)
( 0.005) SHO: cloning of objects, rehash at detach (note 708843)
( 0.006) Print control buffer overflow (note 707500)
( 0.006) InitStor: missing free (note 707929)
( 0.006) Free_Area/Instance (note 709558)
( 0.006) Shared Objects core at table update (note 712739)
( 0.006) BOM / XmlDecl bug (note 592857)
( 0.006) Max shared string size (note 592857)
( 0.006) Default values of exp/imp function parameters (note 712280)
( 0.006) RTM bugfix in get_classname (note 711420)
( 0.006) SM51: Allow more than 1000 patch textes altogether (note 712811)
( 0.006) C-Call AB_GET_COUNTRY (note 685207)
( 0.006) TPDA: Avoid duplicate breakpoints (note 713456)
( 0.006) Too many frame characters (note 671796)
( 0.006) Check type load time stamp (note 713492)
( 0.006) Prevent two short dumps in one second (note 711982)
( 0.006) Default values of exp/imp function parameters (2) (note 712280)
( 0.007) Default values of exp/imp function parameters (3) (note 712280)
( 0.007) RFC Patch Collection 11.2004 (note 715274)
( 0.007) ST: Apply in Loop, Variables (note 710150)
( 0.007) ST: XML Position in Exception (note 715879)
( 0.007) Two Phase Pbag Search (note 713493)
( 0.007) LOAD_PROGRAM_CLASS_MISMATCH (note 716456)
( 0.007) Syntax error with VERI STRUCTINFO (note 716353)
( 0.007) XSLT Core by interface methods (note 709857)
( 0.007) Clean prev user after wp restart (note 715877)
( 0.007) Debugging rfc after server cleanup (note 715881)
( 0.007) CST patch collection 12 2004 (note 716915)
( 0.007) CLUSTD converter (deep) / EXPORT (SAP_UINT) (note 612359)
( 0.007) Core dump in LOAD_PROGRAM_CLASS_MISMATCH correction (note 716456)
( 0.007) SYSTEM_CORE_DUMPED at ATTACH / DETACH (note 718666)
( 0.008) SLIN: 640 AKK problem with SYNT_EXT_INFO (note 717012)
( 0.008) Error in ab_HshSetDelete (note 719413)
( 0.008) AKK violation: Newly appearing syntax error (note 719142)
( 0.008) SYSTEM_CORE_DUMPED in sc_program_env (gen/scsymbc.c) (note 719139)
( 0.008) Fix charref parsing (note 592857)
( 0.008) ALEWEBDOWNLOAD in Unicode systems (note 676835)
( 0.008) Support the displaying of XML Docs in the ITS (note 717380)
( 0.008) Open SQL: missing syntax error message texts (note 710454)
( 0.008) HTTPS proxy authentication in ICF (note 717995)
( 0.008) Diag protocol: multiple codepages (note 621992)
( 0.008) Codepage conversion for PDF based jobs (note 719630)
( 0.008) Missing dynamic Texts in GUI-Status (note 717870)
( 0.008) READ DATASET: Suppress conversion exception if requested (note 709832)
( 0.008) Userswitch Inbound-/Outbound-Scheduler (note 212742)
( 0.008) CCMS Monitoring Patch Collection 2004/2 (note 694057)
( 0.008) SCANNER_MISSING_MESSAGE (note 719396)
( 0.008) Unicode: Core Dump in build_initrec, Modul dbntab (note 717717)
( 0.008) Snc/accept_insecure_rfc=U for system-to-system calls (note 713495)
( 0.009) Error in ab_HshSetDelete (II) (note 719413)
( 0.011) Error in ab_HshSetDelete (III) (note 719413)
( 0.011) Scroll BCALV_TEST_LIST -> scrolls correctly (note 721384)
( 0.011) Userswitch Inbound-/Outbound-Scheduler (note 716263)
( 0.011) ST: exception information; littleEndian; tables (note 715879)
( 0.011) ST: exception information; littleEndian; tables (note 720364)
( 0.011) Exceptions in CALL SCREEN (note 720908)
( 0.011) TPDA: prepare fix for dynp debugging (note 719967)
( 0.011) RSQL: Correction for MODIFY DBTAB FROM ITAB (note 716037)
( 0.011) Enhancements for ITS (note 720738)
( 0.011) Avoid short dump LOAD_NOT_FOUND_AFTER_GEN (old timestamp) (note 615022)
( 0.011) Display data references in the ABAP debugger (note 721223)
( 0.011) remove semaphore families and reorganize all ip__libs (note 721885)
( 0.012) Statistics: wrong data in rfc client destination records (note 724253)
( 0.012) Wrong length in copy operation in func check_usobt() (note 724528)
( 0.012) CST patch collection 15 2004 (note 723952)
( 0.012) Invalid Method Call Syntax (note 722346)
( 0.012) Invalid Warnung For Class Type (note 722347)
( 0.012) Update Memory Inspector (note 684660)
( 0.013) Wrong length in copy operation in func check_usobt() (note 724528)
( 0.013) Shared Objects: data references and detach (note 722884)
( 0.013) Selecting a context menu entry cause session hang up (note 713598)
( 0.013) MOVE_TO_LIT_NOTALLOWED with READ ... TRANSPORTING (note 722778)
( 0.013) Fix for searchhelp showing only one result value (note 697295)
( 0.013) Using keys in dropdown listboxes if no value is supplied (note 717871)
( 0.013) ITSP: Hitlist in Unicode systems (note 676835)
( 0.013) ShmFreeRemoveInactiveLocks with 2 locks (note 709558)
( 0.013) Shared Objects - itab line reference after detach (note 721190)
( 0.013) HTTPS proxy authentication in ICF (II) (note 717995)
( 0.013) Code pages, languages and locales, packet 37 + 38 (note 447519)
( 0.013) Code pages, languages and locales, packet 37 + 38 (note 722638)
( 0.013) Ixml_stl / runt / tidy (note 592857)
( 0.013) Empty dynprolist does not cancel control rendering any more (note 718292)
( 0.013) Enhancements for ITS (note 720738)
( 0.013) No debug after Dynp RABAX (note 721693)
( 0.013) Multiple instances of same subscreen and f4 ocx (2) (note 698564)
( 0.014) ITS640, supporting sap-accessibility (note 676835)
( 0.014) XSLT: Unicode in XPath Expressions (note 613113)
( 0.014) Search help and focus (note 728722)
( 0.014) Ab_PrepareStrh with lenght 0 return not NULL (note 729435)
( 0.014) ITS640, Response Container removed (note 676835)
( 0.014) Missing print controls (note 707500)
( 0.014) Support of ISO Latin-1 characters for certificates (note 723016)
( 0.014) EVENT parameter: LIKE, TYPE LINE OF not evaluated (note 724406)
( 0.014) MINCHAR, MAXCHAR wrong value (note 724304)
( 0.014) ITS640, supporting ~http_https on/off (note 676835)
( 0.014) ITS640, takeover logoff/exiturl (note 676835)
( 0.014) C-call for printing the cover page (note 720409)
( 0.014) Disabling ITS disables the 'Compiling...' progress indicator (note 725617)
( 0.014) Grid-View dump, Alewebdownload (note 676835)
( 0.014) Trfo Rabax Handling corrected (note 729202)
( 0.014) Code pages patch packet 39 (note 447519)
( 0.014) Memory allocation for strings reduced (note 721876)
( 0.014) READ ... BINARY for SORTED TABLE with attribute key (note 725720)
( 0.014) Bidi printing: Corrected rightadjustment of numbers (note 618988)
( 0.014) ITS640,takeover command logoff/endofsession SSO (note 676835)
( 0.014) CX_SHM_INCONSISTENT; CL_SHM_UTILITIES (note 727142)
( 0.014) Prevent 0x00 in database table SNAP (note 722444)
( 0.014) Error if print immediately for PDF based forms (note 727914)
( 0.015) Correct lookup on password history (note 732038)
( 0.015) CCMS Monitoring Patch Collection 2004/2 (note 694057)
( 0.015) Core in syntax check (offset length w/ interface comp.) (note 732367)
( 0.015) CST patch collection 18 2004 (note 730345)
( 0.015) Invalid sapgui codepage (note 700448)
( 0.015) NO_PDF flag for ADS spool jobs (note 685576)
( 0.015) FxReader set_error (note 722030)
( 0.015) Incorrect display of list search results in RTL mode (note 729558)
( 0.015) Support of ISO Latin-1 characters for certificates (note 723016)
( 0.016) CREATE for key table with default key (note 732922)
( 0.016) Rebuild rspoicon.c in krn/rspo (note 724736)
( 0.016) Tablesharing fault in MOVE-CORRESPONDING (note 732958)
( 0.016) Core at INSERT into table after SORT (note 733079)
( 0.016) Supporting ICF-Options for ITS (note 727137)
( 0.016) Cl_fx_reader update (note 722030)
( 0.016) ITS-Plugin 640: known problems (note 676835)
( 0.016) Enable ticket creation for ITS WebGUI/IAC (note 720738)
( 0.016) Invisible focus element (note 734746)
( 0.016) RFC legacy MDMP callers and Unicode callees (note 722193)
( 0.016) Redundant moves in itab operations (note 726657)
( 0.016) Attach_for_update returns shared lock (note 733184)
( 0.016) Application server hangs on Windows 2003 waiting for semaphore (note 724212)
( 0.016) ITS-Plugin 640: known bugs (note 676835)
( 0.016) 'CLASS ... FOR TESTING + INTERFACES' (note 722346)
( 0.016) Avoid SYSLOG message 'PXA recovery after reboot' (note 689497)
( 0.017) ST: alignment for variable-read (note 735543)
( 0.017) IMPORT: alignment handling for old exports (note 734897)
( 0.017) NT: sapstartsrv prozess auto restart feature (note 729945)
( 0.017) IMPORT: error with ignoring structure boundaries (note 737044)
( 0.017) Open SQL : Allow more than eight hints (note 735360)
( 0.017) Event SAP_SYSTEM_START with parameters (note 681516)
( 0.017) Sapgui 640 and tablecontrol column selections (note 735695)
( 0.017) Diag trace: unknown entries (note 736592)
( 0.017) Debugger: Auth. problems while saving table to local file (note 729616)
( 0.017) RFC Patch Collection 18 2004 (note 732744)
( 0.017) ABAP Shared Objects: Coredump at ATTACH WRITE (note 733969)
( 0.017) TIME_OUT oder Coredump in C-Funktion ab_ScanBase (note 733971)
( 0.017) ST: variables, iXML objects (note 737174)
( 0.017) destroyed dynpro load (note 207817)
( 0.017) Japanese characters were scrambled (note 736835)
( 0.017) XI-Editor (note 676835)
( 0.017) ITS-Plugin 640: known bugs (note 676835)
( 0.017) Correction in session management within function (note 676835)
( 0.017) SCAN STRUCTURE: GROUP BY in sub query (note 363992)
( 0.017) Segmentation Violation in db_ntab (Makro CHECK_ACC) (note 736340)
( 0.018) CREATE_DATA_UNKNOWN_TYPE during XML-ABAP deserialization (note 739134)
( 0.018) RUNT_INTERNAL_ERROR during XML-ABAP object (note 739233)
( 0.018) ST: deserialization with tt:copy (note 739825)
( 0.018) Dynpro Compress: CONTAINER_IGNORE for Table Control set (note 738808)
( 0.018) Code pages, languages and locales, packet 40 + 41 (note 447519)
( 0.018) RFC Patch Collection 18 2004 (note 732744)
( 0.018) Invalid sapgui codepage (note 700448)
( 0.018) ERROR trace: invalid value hacurrow hwcurrow (note 651566)
( 0.018) IMPORT: AS400 alignment handling (note 739164)
( 0.018) Forward POST parameter from ITS frameset (note 737798)
( 0.018) Code pages patch packet 42 (note 447519)
( 0.018) JavaScript linux64 correct INT_FITS_IN_JSVAL (note 740973)
( 0.018) CST patch collection 22 2004 (note 741110)
( 0.018) Login/password_charset, codeversion 'D' (note 735356)
( 0.019) Ixml shared memory corrections (note 592857)
( 0.019) CCMS Agent Patch Collection 2004/3 (note 694057)
( 0.019) ST: ignore irrelevant whitespace (note 742507)
( 0.019) Code pages patch packet 40 (NT) (note 447519)
( 0.020) NT: Optional sequential GUID generation (note 740418)
( 0.020) GUI_PATCHLEVEL for app server (note 591681)
( 0.020) List Tree, Hyperlinks (note 742066)
( 0.020) List Tree, Hyperlinks (note 742066)
( 0.020) New HTML(B) strEnc function (note 739619)
( 0.020) CST patch collection 25 2004 (note 744711)
( 0.021) Prepare for DBPROPERTIES (pack 44) (note 447519)
( 0.021) Missing wrapper object of class CX_SY_NO_HANDLER (note 745804)
( 0.021) XML-ABAP, SAP_BASIS 610: component names with namespaces (note 745935)
( 0.021) Possible Core after MESSAGE string TYPE 'X' (note 746144)
( 0.021) XSLT: Computation of xsl:sort attributes (note 746146)
( 0.021) SE30: Missing trace file after measurement (note 740184)
( 0.021) Wrong free of memory (note 745745)
( 0.021) NT: sapstartsrv fix for prozess auto restart feature (note 729945)
( 0.021) F1 on pushbuttons (note 744822)
( 0.021) ICF: Shortened Session-IDs in Developer-Traces (note 745722)
( 0.021) CALL TRANSFORMATION Option VALUE_HANDLING (note 727549)
( 0.021) CST patch collection 26 2004 (note 746373)
( 0.021) Invalid sapgui codepage (note 700448)
( 0.022) Alignment checks for packed numbers (note 747695)
( 0.022) Illegal dynpro state after RABAX (note 747694)
( 0.022) AsXML: suppress static interface attributes (note 747155)
( 0.022) Accept Dynpro Sourceversion 37 (note 743155)
( 0.022) ITS Plugin 640, known problems, item 23) security, buffer overwrite (note 676835)
( 0.022) Screens with GOS Containers (note 747140)
( 0.022) Empty search help dialogs (note 747270)
( 0.022) Too many SPOOL* files in global directory (note 749860)
( 0.022) New GUID and TID algorithm (note 650280)
( 0.022) Code pages patch packet 43 (note 447519) (note 447519)
( 0.022) Fixed a tight loop in julep, calling a function with an extra (note 747700)
( 0.022) ERROR trace: invalid value hacurrow hwcurrow (note 651566)
( 0.023) LZPL OTF driver (note 750002)
( 0.023) Correct 132-char limitation (note 750363)
( 0.023) RFC: additional returncode-check for ThSendToGui (note 685609)
( 0.023) TABLE_LINE_NOT_EXISTING at loop on a HASHED TABLE (note 750042)
( 0.023) INSERT of a loop reference into a hashed table (note 749075)
( 0.023) Semantics of the SUM statement (note 742683)
( 0.023) Diag enhancements for acc support (note 750543)
( 0.023) ITS-Plugin 640: Known problems (note 676835)
( 0.024) Error in step movenametab (note 745745)
( 0.025) HTTP debugging: Save memory ranking to local file (note 752659)
( 0.025) Avoid unnecessary calls to semaphore 49 (note 752473)
( 0.025) Buffer overflow in OMS command buffer (note 752977)
( 0.025) Correct handling of empty strings (note 740987)
( 0.027) Open SQL : Allow more than 8 hints in SELECT (note 754728)
( 0.027) Full path name to 255 char for temse (note 749150)
( 0.027) NT: Fix for occasional 'Service not started' error during Service inst (note 142100)
( 0.027) Diag trace: unknown entries (note 736592)
( 0.027) CST patch collection 28 2004 (note 751484)
( 0.027) Image does not fit (note 676835)
( 0.027) Strings and dynpro char fields (note 618120)
( 0.027) Core in ab_CxTableViewColOrder (note 751754)
( 0.027) ITS HTML Control: protocol not added if missing (note 747962)
( 0.027) Ixml stlport memory hole (note 545335)
( 0.027) CST patch collection 30 2004 (note 755912)
( 0.027) Wrong output of japanese characters II (note 670069)
( 0.027) Empty spool list for NEW-PAGE PRINT OFF (note 750153)
( 0.027) ABAP List Structure Recognition (1) (note 751494)
( 0.027) SHO: Area-constructor at INVALIDATE, setting area-properties (note 751882)
( 0.028) SYSTEM_RUDI_INVALID at CREATE OBJECT o TYPE (t) (note 757122)
( 0.028) Wrong syntax error at INTERFACES (note 757284)
( 0.028) ABAP List Structure Recognition (2) (note 751494)
( 0.029) Missing PUBLIC addition of CLASS (note 759104)
( 0.029) Open SQL: problem with extended portability check (note 758763)
( 0.029) SYSTEM_CORE_DUMPED in ABAP generation for type aliases (note 759109)
( 0.029) Codepage Conversion: New flag for Bidi support (note 716200)
( 0.029) ITS up/download: upload of files to unicode R/3 incorrect (note 758362)
( 0.029) Fixed multiple HtmlPPs bug for resourceless services (note 759228)
( 0.029) ITS640 Known bugs Item 26 (note 676835)
( 0.030) Check for infinite loops in random number generator (note 759735)
( 0.030) ABAP-XML transformation with PARAMETERS infloops (note 746332)
( 0.030) Correct SQL EXPLAIN function on UNICODE systems (note 760883)
( 0.030) Extend Structure Buffer (note 761324)
( 0.030) NT: work processes don't start due to different memory layout (note 761159)
( 0.030) RSQL: Correction for DELETE DBTAB FROM ITAB (note 753333)
( 0.030) Correct focus handling on F1 help (note 761377)
( 0.030) Dbbuf: invalid data read from single key buffer (note 625242)
( 0.030) DDIC-Types used by CALL METHOD ... CALLING (note 761843)
( 0.030) Warning at CALL METHOD (note 761933)
( 0.030) UTF-8 conversion for jobdata (note 739968)
( 0.030) CPIC calls for usertype SYSTEM, logon timestamping (note 760414)
( 0.030) DB Multiconnect: Closing idle secondary connections (note 762084)
( 0.030) TPDA: problems with BREAK-POINT ID (note 762431)
( 0.030) ABAP List Structure Recognition (3) (note 751494)
( 0.030) SLC length (note 759208)
( 0.030) Corrected namespace handling (note 762678)
( 0.031) Correct INT4 I/O (note 627615)
( 0.031) No Selectionscreen generation for classes and interfaces (note 744856)
( 0.031) RABAX close unused snapfile (note 763333)
( 0.031) Data-References and ADD-CORRESPONDING (note 761850)
( 0.031) Code pages, languages and locales, packet 46 + 47 (note 447519)
( 0.031) SHO: DetachCommit with CompletionError (note 763653)
( 0.031) Code pages patch packet 48 (note 447519)
( 0.031) Fixed broken %-escaping of multibyte strings (note 763175)
( 0.031) Corrected dw_gui.sl linkage on hp platform (note 763292)
( 0.031) Runtime error UNEXPECTED_RUDI_TYPE (note 764185)
( 0.031) Runtime error SYSTEM_LOAD_OF_PROGRAM_FAILED (note 764186)
( 0.031) Runtime error SYSTEM_SHM_AREA_DETACHED (note 764187)
( 0.031) Runtime error SAPSQL_WA_WRONG_ALIGNMENT (note 764184)
( 0.032) SHO: DetachCommitCompletion failed (Part 2) (note 763653)
( 0.032) SHO free on local itab (note 749082)
( 0.032) Corrupted report sources/textes after unicode upgrade (note 765377)
( 0.032) Process OTF command BM in RTL (note 353987)
( 0.032) Trust-Manager: Error when encrypting PSE (note 765123)
( 0.032) Security Audit Log: some transaction starts not audited (note 763159)
( 0.032) CST patch collection 34 2004 (note 764321)
( 0.032) ABAP List Structure Recognition (4) (note 751494)
( 0.032) DYN_COMP_ILLEGAL with CREATE DATA (note 766330)
( 0.033) Reset SPATPAR flag (note 765605)
( 0.033) OMS support for AS400 (note 766732)
( 0.033) Open-SQL: SELECT INTO CORRESPONDING FIELDS and generic type of target (note 765822)
( 0.033) Rfc patch collection 35 2004 (note 766807)
( 0.033) Url form parameter scanning without = sign (note 764903)
( 0.033) ITS-Plugin 640: Known/fixed problems (note 676835)
( 0.033) ITS TextEdit Control: Text disappears after searchhelp (note 725839)
( 0.033) Code pages,converters (package 49) (note 447519)
( 0.033) NT: Check CPU timer frequency (note 532350)
( 0.033) Code pages patch packet 50 (note 447519)
( 0.034) Error in kernel call ABAP_CALLSTACK (note 769503)
( 0.034) Runtime error BCD_OVERFLOW converting empty strings (note 769508)
( 0.034) Core dump after implicit cast by ASSIGNING (note 766876)
( 0.034) Performance: do not read TSP02L for RDI/OTF (note 703798)
( 0.034) RFC patch collection 34 2004 (note 769890)
( 0.034) Gui scripting: missing loop field names (note 769420)
( 0.034) Integrated ITS: garbled hit lists (note 770161)
( 0.034) CST patch collection 37 2004 (note 770183)
( 0.035) PRINT_LINE_COUNT_TOO_LOW during printing (note 770335)
( 0.035) Wrong barcode printout (1) (note 770376)
( 0.035) Avoid syntax errors for correct usage of PROVIDE FIELDS (note 771600)
( 0.035) New frontend print for SAP GUI for HTML (note 771683)
( 0.035) Core or runtime error during modify on projection view (note 770318)
( 0.035) Unicode: RFC MDMP dest. garbled code pg., symptom S9 (note 647495)
( 0.035) ITS_Browser_Redirect und Content-Length (note 771183)
( 0.035) Fix memory corruption in move nametab / dipgntab (note 745745)
( 0.035) CALL TRANSFORMATION Parameter INITIAL_COMPONENTS (note 771161)
( 0.035) Forward POST parameter from ITS frameset (note 737798)
( 0.035) Ixml flush / bindata (note 545335)
( 0.035) Code pages,converter (package 51) (note 447519)
( 0.035) ITS640: process sap-sesscmd=USR_ABORT like OK-Code=/NEX (note 772251)
( 0.035) Core or runtime error during modify on projection view (note 770318)
( 0.036) PRINT_LINE_COUNT_TOO_LOW during printing (note 770335)
( 0.036) Active tabstrip button and F4 dialogs (note 772922)
( 0.036) Docker size and new i-mode (note 615047)
( 0.036) Paging related error trace entries (note 694628)
( 0.036) Logon error messages show '#' instead of digit chars (note 774211)
( 0.036) ITS Calendar: Set Color error fixed (note 767437)
( 0.037) AAB breakpoints in system programs (note 774627)
( 0.037) Update MemoryInspector II (note 684660)
( 0.037) CX_INVALID_TRANSFORMATION (note 773330)
( 0.037) Core at customer includes (note 774829)
( 0.037) TABLE_LINE with offset/length specification (note 774703)
( 0.037) ABAP: core dump at LIKE dref->*-component (note 772941)
( 0.037) Failed RFC system calls causing invalid SM20 records (note 774406)
( 0.037) ST: deserialization of type N (note 775699)
( 0.037) Conversion error in HTML Gui (note 775039)
( 0.038) Conversion exits with string parameters (note 776990)
( 0.038) Core in debugger data display (note 777203)
( 0.038) SLIN: Core dump while collecting cross ref data (note 776596)
( 0.038) Start transaktion via systemfunction DYNP_OKCODE_SET (note 776496)
( 0.038) Perfomance Fix READ DATASET in TEXT MODE (note 775375)
( 0.038) Structure alignment correction: Support for BIDI (note 716200)
( 0.038) CST patch collection 40 2004 (note 776283)
( 0.038) Steploop radio/checkbutton and label left/right (note 776514)
( 0.038) ITS 640 Plugin, known problems, issue 29 (note 676835)
( 0.038) Some bugs with lists in webgui fixed (note 762968)
( 0.038) ITS Up/Download: UrlDecode for Context Variable obsolet (note 766313)
( 0.038) ITS TextEdit: readonly mode in netscape fixed (note 768063)
( 0.038) Tolltip texts for columntree icons (note 776561)
( 0.038) Known bugs ( issue no 28 ) (note 676835)
( 0.038) Closing dangling RFC connections used with printing (note 753080)
( 0.038) Introducing strwidth (note 745460)
( 0.038) Comparing with a LOOP reference (note 767597)
( 0.038) SHO: Cores in GC (note 774465)
( 0.038) Trigger Garbage Collection when many PCBs used (note 628303)
( 0.038) ABAP-PH: Missing Unicode errors in syntax-check (note 777451)
( 0.038) RFC legacy caller, dump on LANG=space in Unicode system. (note 722193)
( 0.038) Code pages,converter (package 52) (note 447519)
( 0.038) Problems during transport into a Unicode system (note 775114)
( 0.038) No Frames Print Parameter (note 777337)
( 0.038) List display in Debugger (note 777338)
( 0.038) Sapgui/theme default value (note 610274)
( 0.038) No initialization of parameter of DESERIALIZE_HELPER (note 777339)
( 0.038) Automatic confirmation of Warnings (note 778467)
( 0.038) RUNT_ILLEGAL_SWITCH when resetting internal tables (note 778376)
( 0.039) # in Asian archived print lists (note 778095)
( 0.039) ABAP-SY: Core for dyn. arguments > 255 chars (note 777882)
( 0.039) PXA: Introducing PXA_CACHE (note 746984)
( 0.039) RTTI DDIC output length > 255 (note 777826)
( 0.039) RFC Patchcollection 41 2004 (note 779720)
( 0.039) Dynpro: TabStrip and Scrollbar SubScreen Area with CONT_IGN (note 673831)
( 0.040) No implicit commit during debugging (note 778582)
( 0.040) RFC Patch collection 40 2004 (note 778710)
( 0.041) Workprocess hangs on dumping OS process information when memory is low (note 781518)
( 0.041) BIDI: Support for fieldwise base direction (note 779879)
( 0.041) Foreign key check and chectables with strings (note 780473)
( 0.041) ALV grid view entries are not transferred (note 777995)
( 0.041) Agate crash when the last line of a grid view is copied (note 775672)
( 0.041) ALV grid view column header is not displayed (note 775679)
( 0.041) ALV grid view column selection incorrect after dial (note 776587)
( 0.041) ALV Gridview 'PAGE UP' leads to the announcement first (note 780570)
( 0.041) ITS-PLUGIN: Message handling for IAC (note 779543)
( 0.041) Suppress short dump lists in IACs (note 779543)
( 0.041) ITS640: enhanced sap-sesscmd handling for webgui (note 772251)
( 0.042) Provide kernel functionality for VMIT (note 781997)
( 0.042) Rollout rabax save (note 778921)
( 0.042) AB_GET_TEXT_FROM_CLUSTER:handling of 50 warnings per statement (note 816246)
( 0.059) ABAP-SY: Recursive INCLUDE nesting for classes (note 816247)
( 0.059) Error CALL_FUNCTION_ILLEGAL_P_TYPE (note 611004)
( 0.059) Diag protocol: multiple codepages (note 621992)
( 0.059) Replace strtok with ucafinduca (note 498369)
( 0.059) DBIF_RTAB_OUT_OF_CURSORS when using ITS (note 819494)
( 0.060) ALV Gridview optimized column width (note 766169)
( 0.060) SELECTION-SCREEN INCLUDE PARAMETERS and Listboxes (note 819057)
( 0.060) Release independent sapevt (note 802172)
( 0.060) RSQL: Correction concerning queries on projection views (note 809297)
( 0.060) Check CI include (note 818942)
( 0.060) Wrong change record when deactivating initial password (note 819855)
( 0.060) TRANSFER to file: Don't truncate East-Asian STRINGs (note 820055)
( 0.061) SAAB: Short dump with the minutes announcement in TA SAAB (note 821358)
( 0.061) NO F6H message by no record found in TST03 (note 806588)
( 0.061) Javascript: adopt binding to changes in note 800346 (note 821710)
( 0.061) Enable -SAP- encoding (note 819976)
( 0.061) BIDI: Support for fieldwise base direction (note 779879)
( 0.061) Menu: dynamic function texts (note 821701)
( 0.061) Batch-Input: SYSLOG TREAD - tcode active error (note 822479)
( 0.061) RFC patch collection 8 2005 (note 821964)
( 0.061) DB Multiconnect: Workprocess restart destroys connection mapping (note 796862)
( 0.061) ABAP-SY: Recursive INCLUDE nesting for classes (2) (note 822698)
( 0.061) Correction of INF -391 error (note 806993)
( 0.062) New frontend print (note 821519)
( 0.062) RFC sends large datapackets uncompressed to the SAPGUI (note 824428)
( 0.062) Load balance with SNC, provide sncname (note 817854)
( 0.062) Menu: dynamic function texts (note 821701)
( 0.062) Correct abend in update task debugging (note 824772)
( 0.062) Shared Objects: String-Sharing (note 824261)
( 0.063) Sharing hash tables (note 825452)
( 0.063) Corrections to the Unicode interface (note 522119)
( 0.063) Dispatch events in IMC (note 820333)
( 0.063) Call transformation: writing to string impr (note 824676)
( 0.063) Avoid DBIF_NTAB_TABLE_NOT_FOUND during garbage collection (note 826350)
( 0.063) ST: standalone decl / nested call in loop (note 825516)
( 0.063) XSLT: Debugger / escaping in namespaces (note 825517)
( 0.063) Missing utf8-support in agi-default for webgui (note 825652)
( 0.063) Code pages patch packet 62 (note 447519)
( 0.063) RUAPO4.1 ~DISCONNECTONCLOSE parameter not working (note 827375)
( 0.063) Do no core dump, when some pointers are missing in (note 563769)
( 0.064) Spooler level 2 trace bug (note 827514)
( 0.064) RTTI lock program (note 822900)
( 0.064) Strcpy_sU data misaligned on ntia64 (note 826536)
( 0.064) Enabling MSCS support for SAPMMC (note 828432)
( 0.064) ITS 6.40: control name = container name for IACs (note 828800)
( 0.064) Correct name for tpool proxies and check sum (note 823035)
( 0.065) Invalid sapgui input data (note 829096)
( 0.065) Protect read-only fields (note 830700)
( 0.065) Comparing data refs created via LOOP REF INTO (note 830819)
( 0.065) ABAP_ASSERT in extri loop, classical debugger (note 803140)
( 0.065) Would core in various ABAP/Dynp situations (note 830710)
( 0.065) ABAP-SY: AKK violation for DATA in system include (note 826284)
( 0.065) ABAP-SY: Coredump for >50 warnings per statement (2) (note 816246)
( 0.065) READ opt. for over specified non-matching key (note 825670)
( 0.065) INTERFACE ... DEFFERED in class pools (note 831232)
( 0.065) SE30: Avoid error nr 5 for CALL TRANSACTION USING (note 170470)
( 0.065) RFC patch collection 12 2005 (note 831456)
( 0.066) Rfc Patch Collection 11 2005 (note 828000)
( 0.066) FX: utf-8 conv error (note 825516)
( 0.066) Core in dy_tx_param() (note 831528)
( 0.066) Diagograph(): buffer size check (note 832017)
( 0.066) Batch-Input: No Message 00 255 when modify the ok-code (note 833001)
( 0.066) PXA/ATRA Patch Collection 12/2004 (note 802791)
( 0.066) Search help: F4 within F4 (note 832866)
( 0.066) EXCP_INTERNAL_ERROR during debugging (note 833453)
( 0.067) ABAP GC on 32-bit platforms when more than 3.4 GB used (note 833336)
( 0.067) Diag enhancements for acc support (note 750543)
( 0.067) SYSTEM_RUDI_INVALID at ASSIGN with length (note 834179)
( 0.067) SHO tab sharing hash collision error (note 829508)
( 0.067) SHO: ABAP_ASSERT during update lock with ASSIGING (II) (note 795666)
( 0.067) Kernel change for hide/display gridlines and customizing (note 825864)
( 0.067) CCMS Monitoring Patch Collection 2005/2 (note 809007) (note 809007)
( 0.067) Missing syntax error messages (note 826436)
( 0.067) Debugger (jump to statement)' (note 834640)
( 0.067) Integrated ITS 6.40: disconnectonclose for IACs in int. ITS)' (note 827375)
( 0.067) New ABAP Debugger problems with stack navigation (note 832192)
( 0.068) Re-sort of OTF table in ABAP (note 353987)
( 0.068) Spooler: Garbage text in REALSRV field (note 835703)
( 0.068) Integrated ITS and sap webdispatcher (note 835762)
( 0.068) OpenSQL: General support for ABAP-Hints on MAXDB (note 652096)
( 0.068) Open SQL: dynamic LIKE and ABAP field as pattern (note 835522)
( 0.068) Classic Debugger: itab search & download, watchpts (note 835010)
( 0.068) Int. ITS 6.40: ~disconnectonclose for IACs always turned on (note 827375)
( 0.068) ISeries: fdopen handling fixed (note 833895)
( 0.069) Avoid lockwaits on table TMDIR while debugging (note 837656)
( 0.069) Integrated ITS, version information in HTML page (note 838549)
( 0.069) Searchhelp select otions, select for blanks (note 836742)
( 0.069) RFC logon - security bugfixes (note 830528)
( 0.069) Memory leak using table sharing (note 837518)
( 0.069) New checks for DDIC type inconsistencies (note 837077)
( 0.069) Update list structure recognition 2 (note 751494)
( 0.069) WRITE UNDER and COMMON PART (note 825434)
( 0.069) Code pages, converters, locales. Package 636465 (note 447519)
( 0.069) SORTED TABLE: Memory consumption after MOVE/IMPORT (note 834807)
( 0.069) Shared Objects: Multi-Attach; Get_Current_Usage (note 838683)
( 0.069) Clear RTM buffer after flushing (note 838305)
( 0.069) Core dumps during session end in rare cases (note 838305)
( 0.069) CST patch collection 15 2005 (note 834501)
( 0.069) ASCII ABAP stack programs and SCS Unicode programs in one dir (note 837731)
( 0.069) Actionbar entries without fastpath (note 548709)
( 0.069) Fixes for enhanced ASCII support on OS/390 (note 595331)
( 0.069) LSR list ourput IV (note 751494)
( 0.069) Diag protocol: multiple codepages (note 621992)
( 0.069) Itab component access with length specification (note 838229)
( 0.069) Fixes for enhanced ASCII support on OS/390 (note 595331)
( 0.069) Integrated ITS, problems during conversion of indication (note 831959)
( 0.069) Userswitch Inbound-/Outbound-Scheduler (note 716263)
( 0.069) Toolbar control remember scroll position (note 806313)
( 0.069) Shared Objects: Performance Detach_Commit (note 838596)
( 0.070) Revert UTC BufferSync Timestamp until R3Trans and TP (note 749911)
( 0.071) Patch collection - logon routine, 1/2005 (note 835038)
( 0.071) 16-Byte alignment in rstg_get (note 837410)
( 0.071) CCMS RZ20: missing green alerts (note 839672)
( 0.071) CCMS RZ20: missing green alerts (note 746193)
( 0.071) D021S get each field separately (note 687334)
( 0.071) SE30: Avoid error nr. 5 in case of LEAVE SCREEN (note 170470)
( 0.071) Performance of compare for shared internal tables (note 839691)
( 0.071) Fixed textedit control problem with multipart/form-data ctype (note 841196)
( 0.071) ICM crash in HttpPlugInWriteErrorText (note 842609)
( 0.072) Enable printing of arabic-indic digits (note 842887)
( 0.072) Core after SORT within a LOOP (note 841997)
( 0.072) Its-plugin: Overlap of check boxes and radio buttons (note 839070)
( 0.072) Usob_authvaltrc for 610/620 (note 842157)
( 0.072) Program groups and CFW-modules (note 821158)
( 0.072) Program groups and CFW-modules (note 835127)
( 0.072) SELECT FOR UPDATE: release locks after commit (note 843042)
( 0.072) Set algorithm und key length of SSF PSEs (note 836367)
( 0.072) Downport rnd (no effect for disp+work) (note 836008)
( 0.073) Template invalidation fixed (note 840220)
( 0.073) ITS Up/Download: its plugin error in unicode R3 (note 841263)
( 0.073) ITS HTML Viewer: parameters of the sapevent incorrect (note 829669)
( 0.073) Correct quickinfo in TC (note 842040)
( 0.073) CLUSTER: COMP (note 772941)
( 0.076) Search help in mixed mode apps (note 849476)
( 0.076) ITS: Empty screen after warning message (note 849337)
( 0.076) Toolbarbutton menu (note 848805)
( 0.076) Searchelp error in MASSD (note 848289)
( 0.076) TABLE_LINE_NOT_EXISTING with MODIFY ... WHERE (note 845378)
( 0.076) RFC patch collection 22 2005 (note 850305)
( 0.076) Performance Verification Infrastructure-I (note 803789)
( 0.077) Catch zero length in ST command (OTF RTL handling) (note 353987)
( 0.077) Spooler: CJK string not printed (note 849315)
( 0.077) SapSSL-Update, support for OS/400 ASCII kernels (note 772517)
( 0.077) ST: Loops; deserial-state; extensibility (note 849075)
( 0.077) Dbbuf: enhance performance of single key buffer (note 826729)
( 0.077) Unsharing a HASHED TABLE within a loop (note 852036)
( 0.077) Fix memory corruption in move-nametab (note 745745)
( 0.077) Position of arabian printout (note 849072)
( 0.077) DBIF_NTAB_TABLE_NOT_FOUND during garbage collection-II (note 826350)
( 0.077) Integrierter ITS, MS Office 2003 session timeout (note 846857)
( 0.077) XSLT/iXML: Renderer memory consumption (note 844722)
( 0.077) Ixml file streams (note 834242)
( 0.077) I18n code page package 69 (late write permission) (note 447519)
( 0.077) I18n code page package 67+68 (F5,UMGCCTL,noDB,L) (note 447519)
( 0.077) ALV Grid:F4-Help on non-editable fields enabled (note 849656)
( 0.077) ALV Gridview dropdown lists are unavailable (note 850272)
( 0.077) ALV Gridview remember scroll position (note 839170)
( 0.077) Trim content of modified cells (note 850100)
( 0.077) CST patch collection 24 2005 (note 851195)
( 0.078) Syslog Message for wrong tablename in READ TABLE dbtab (note 851286)
( 0.078) CCMS Monitoring Patch Collection 2005/3 (note 809007) (note 809007)
( 0.078) Additional legacy RFC dest setup info (note 722193)
( 0.078) PROVIDE FIELDS: fix merging of intervals (note 853666)
( 0.078) ITS HTML Viewer: incorrect script paths for inserted scripts (note 853051)
( 0.078) Memory requests and error traces (note 853608)
( 0.078) Ab_BtreeBlockDelete() core on linuxia64 (note 854073)
( 0.078) HTML Tidy: get/set option (note 843855)
( 0.078) DBIF_NTAB_TABLE_NOT_FOUND during garbage collection (III) (note 826350)
( 0.078) Avoid short dump DBIF_REPO_PART_NOT_FOUND (note 854261)
( 0.078) Avoid short dump DBIF_REPO_PART_NOT_FOUND (note 854261)
( 0.079) PRESCRIBE barcode and subscript bu (note 854502)
( 0.079) SORT: use new GETST_TASK_NO_ETRACE (note 193529)
( 0.079) Call Transformation: initial refs; core in rabax (note 854572)
( 0.079) iXML: namespace context; XSLT: meta tag (note 854571)
( 0.079) Problems with CFW modules and ABAP Stack (GC) (note 856468)
( 0.079) Ab_BtreeBlockDelete() core, linuxia64 (II) (note 854073)
( 0.079) ALV Gridview RowID was not supplied correctly (note 853062)
( 0.079) Problems with CFW modules and ABAP Stack (GC) (II) (note 856468)
( 0.080) TRMSG-Messages for CALLING method (note 857551)
( 0.080) Fill attribute sqlmsg in class CX_SY_NATIVE_SQL_ERROR (note 853002)
( 0.080) ITS Up/Down: upload of files in BIN format (note 855475)
( 0.080) IXML Miniparser memory consumption (note 426351)
( 0.080) Get transaction code from SPA (note 840798)
( 0.080) File handling (note 846259)
( 0.080) JavaScript more than 65536 lines (note 858307)
( 0.080) Rabax trace for section (note 858362)
( 0.080) Protect read-only fields (II) (note 842040)
( 0.080) List input and control focus (note 858331)
( 0.080) Trust-Manager: create PSEs with keylength > 512 bit (note 509495)
( 0.080) Correct call of CTL moduls in 6.40 (note 858636)
( 0.080) RFC patch collection 26 2005 (note 858707)
( 0.080) SncSetMyName() in Unicode-binaries ignores name (note 856809)
( 0.080) MaxLength attribute is set to -1 if the backend is Unicode (note 758007)
( 0.081) Integrated ITS, error message on transaction selection screen (note 859213)
( 0.081) Acces violation in fct. EsIGblMthSlotsPrepare (note 860031)
( 0.081) Update Memory Inspector IV (note 684660)
( 0.081) Optimization of the algorithm for generating a job log (note 104185)
( 0.081) RFC patch collection 27 2005 (note 860531)
( 0.081) PXA: avoid mutex corruption after wp restart (note 802791)
( 0.081) ALV Gridview Inputlen of cell could be overwritten by column (note 857074)
( 0.081) CST Patch Collection 28 2005 (note 860319)
( 0.081) In ST01 some auth.objects displayed with garbage (note 855974)
( 0.082) ST02: Avoid core dump at NTAB buffers detailed analysis menu (note 859067)
( 0.082) AvaScript repair cg for chained jumps (note 861568)
( 0.082) Jobs with names in other code pages do not start (note 809888)
( 0.082) NT: sapstartsrv detecting J2EE Safe Mode (note 860654)
( 0.082) CCMS Monitoring Patch Collection 2005/4 (note 809007)
( 0.082) IMPORT: ignore conversion length errors (note 562988)
( 0.082) Preloading DLLs to avoid address space fragmentation (note 853696)
( 0.083) Definition of SLC flag (note 851307)
( 0.083) Syntax warning for MODIFY with INDEX on a HASHED TABLE (note 860304)
( 0.083) Error message on fcode /hmusa (note 862612)
( 0.083) Update Listparser (note 751494)
( 0.083) I18n code page package 7071 (no env, 45000) (note 447519)
( 0.083) Garbled double byte characters (note 670069)
( 0.083) Dump during abaplist PDF conversion (note 864429)
( 0.083) SE30 User Trace (note 716340)
( 0.083) SE30 missing trace data in case of particular units (note 864562)
( 0.083) Skip unknown sapgui connect data (note 864474)
( 0.084) SORT: sharing after phys. sort (note 863934)
( 0.084) Reject system okcodes while debuging BTC or VB (note 864607)
( 0.084) GC and tab sharing (note 862462)
( 0.084) Correct handling of NAZ messages (note 836869)
( 0.084) ABAP-SY: Core dump for type in COMMON PART (note 859631)
( 0.084) HTML tidy error trace (note 426351)
( 0.084) RTTC: illegal type for TYPE HANDLE (note 863747)
( 0.084) ABAP-SY: GEN_FRAGVIEW_EMPTY when accessing empty CI (note 865759)
( 0.084) SE30: Assure 610/620 compatible file format (note 866355)
( 0.084) Cua status traces (note 865763)
( 0.084) Core while unsharing a HASHED TABLE in a LOOP (note 866639)
( 0.085) MOVE-CORRESPONDING on empty CI-Includes (note 865759)
( 0.085) Foreign key messages in BI log (note 867390)
( 0.085) Compatibility of external breakpoints (Kernel 6.40, ABAP 6.10) (note 866347)
( 0.085) RFC Patchcollection 30 2005 (note 866360)
( 0.085) Default tooltip support (note 750543)
( 0.085) ST: with result IXML (note 866256)
( 0.085) Patch collection - logon routine, 2/2005 (note 866327)
( 0.085) CST Patch Collection 31 2005 (note 867690)
( 0.085) Np printon stack (note 864122)
( 0.085) AUNIT test class friends (note 852745)
( 0.085) Perfomance Fix READ DATASET due to string resize (note 867936)
( 0.085) SHO: Commit registration of transactional Areas (note 865094)
( 0.085) Core dump when printing RTL documents (note 868178)
( 0.085) No trailing blanks of last (note 867921)
( 0.086) Code page patch package 74 (note 447519)
( 0.086) ICF Patch Collection 02/2005 (note 867361)
( 0.086) ALV Gridview core dump in CSapITSGridviewCol (note 869120)
( 0.086) Fix overflow, linuxx86_64 responds pretty badly to this (note 772075)
( 0.086) Another occurance of the same overflow problem of the ts structure (note 772078)
( 0.086) Definition of cellinfo flag (note 851307)
( 0.086) ITS Up/Down: implementing of ITS_DIRECTORY_LIST_FILES (note 856141)
( 0.086) ITS TextEdit: changed text could be saved in readonly mode sources (note 868919)
( 0.086) NT: Traceing deadlock during signal or alarm handling (note 869790)
( 0.086) IXML/XSLT: ABAP class registration (note 865779)
( 0.086) New diag supportbits (note 866219)
( 0.086) IXML conversion buffer (note 866208)
( 0.086) RFC patch collection 32 2005 (note 868767)
( 0.087) IMPORT: ign cnv len errors and truncation (note 562988)
( 0.087) Exit in LOOP AT SCREEN would remove block stack entries (note 870294)
( 0.087) ALV Gridview losing single row selection during its roundtrip (note 870999)
( 0.087) Patch lsr list output VII (note 779879)
( 0.087) ITS Html Viewer: javascript error for gecko Browser in framesets (note 864381)
( 0.087) ITS Html Viewer: caching for all binary documents enabled (note 870373)
( 0.087) Enhanced SAP encoding methods (note 866020)
( 0.087) New SSF Signer-Resultcodes for Certificate Revocation (note 870640)
( 0.087) GETWA_NOT_ASSIGNED since PL 84 (note 871851)
( 0.087) ALV Gridview Control AGate crash due to error in put_SelectedRows2 (note 865899)
( 0.087) ALV Gridview kernel change for expandable/collapsible totals/subtotals (note 861326)
( 0.087) Core with CLASS.Type or INTF.Type for data ref in XML-ABAP (note 871774)
( 0.087) No runtime type check with CLEANUP INTO (note 871407)
dbsl patch information
( 0.001) Support of doublebyte character sets (note 695899)
( 0.006) Sizecheck for tables includes LOBs (note 713281)
( 0.012) MAX_INT_CNT=1000 (note 634263)
( 0.019) Correction of ORA-01427 in dbdd_get_size (note 739536)
( 0.025) Correction of internal function DbSlPing() (note 748370)
( 0.032) Avoid dump when reading negative numbers into type P field (note 764005)
( 0.039) NT: work processes don't start due to different memory layout II (note 761159)
( 0.055) Secondary connection with multiple NLS environment (note 808505)
( 0.073) Automatic reconnect after ORA-03123, ORA-03127 (note 797792)
( 0.079) Enable and allow rel. 6.40 for Oracle 8.1.7 (note 851551)
brbackup
BR0051I BRBACKUP 6.40 (12)
Patch Date Note Text
3 2004-01-26 700733 Support for secure copy 'scp' command
11 2004-06-25 749041 Workaround for ORA-12158 on Tru64 Unix
release note 680046
kernel release 640
patch date 2004-07-28
patch level 12
make platform NTintel
make mode OCI_920_SHARE
make date Sep 19 2004
brarchive
BR0002I BRARCHIVE 6.40 (12)
Patch Date Note Text
3 2004-01-26 700733 Support for secure copy 'scp' command
11 2004-06-25 749041 Workaround for ORA-12158 on Tru64 Unix
12 2004-07-28 759839 BRARCHIVE fails for database in mount state
release note 680046
kernel release 640
patch date 2004-07-28
patch level 12
make platform NTintel
make mode OCI_920_SHARE
make date Sep 19 2004
brrestore
BR0401I BRRESTORE 6.40 (12)
Patch Date Note Text
3 2004-01-26 700733 Support for secure copy 'scp' command
11 2004-06-25 749041 Workaround for ORA-12158 on Tru64 Unix
release note 680046
kernel release 640
patch date 2004-07-28
patch level 12
make platform NTintel
make mode OCI_920_SHARE
make date Sep 19 2004
brtools
BR0651I BRTOOLS 6.40 (12)
Patch Date Note Text
release note 680046
kernel release 640
patch date 2004-07-28
patch level 12
make platform NTintel
make mode OCI_920_SHARE
make date Sep 19 2004
brconnect
BR0801I BRCONNECT 6.40 (12)
Patch Date Note Text
5 2004-03-19 719581 Delete of old records in arch.log with BRCONNECT
release note 680046
kernel release 640
patch date 2004-07-28
patch level 12
make platform NTintel
make mode OCI_920_SHARE
make date Sep 19 2004
sapdba
tp
R3trans
saposcol
SAPOSCOL version COLL 20.88 640 - 20.51 NT 05/07/13, 32 bit, multithreaded, Non-Unicode
compiled at Aug 22 2005
systemid 560 (PC with Windows NT)
relno 6400
patch text COLL 20.88 640 - 20.51 NT 05/07/13
patchno 87
intno 20020600
running on SAPBL5 Windows NT 5.0 2195 Service Pack 4 2x Intel 801586 (Mod 2 Step 7)
saplicense
SAPLICENSE version information
slic (saplicense) version 3.00
saplicense information
kernel release 640
kernel make variant 640_REL
compiled on NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10
compilation mode Non-Unicode
compile time Aug 21 2005 19:38:48
update level 0
patch number 48
source id 0.087
supported environment
database (SAP, table SVERS) 610
620
630
640
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Operating System
Parameter Changed on Status Value
Database
Parameter Changed on Status Value
ACTIVE_INSTANCE_COUNT 15.06.2005 A
AQ_TM_PROCESSES 15.06.2005 A 0
ARCHIVEDear Pallavi,
Very useful post!
I am looking for similar accelerators for
Software Inventory Accelerator
Hardware Inventory Accelerator
Interfaces Inventory
Customization Assessment Accelerator
Sizing Tool
Which helps us to come up with the relevant Bill of Matetials for every area mentioned above, and the ones which I dont know...
Request help on such accelerators... Any clues?
Any reply, help is highly appreciated.
Regards
Manish Madhav -
Upgrade fails at phase STARTSAP_TRANS
We are upgrading to NW2004s (ABAP only)
<u><b>How to re-start the shadow instance?</b></u>
At this point, <b>anyway we cannot start the shadow instance.</b>
At SAPMMC, the disp+work
1) first show "running but the dialog queue standstill"
2) then show" running but not connected to the message server"
3) then the disp+work dies.
Above happens in 1 minute after re-start.
<b>The dev_ms reads:
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 4740] Mon Apr 02 15:07:53 2007
[Thr 4740] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 94
intno 20050900
make: multithreaded, ASCII, optimized
pid 2932
[Thr 4740] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2932) [msxxserv.c 1824]
[Thr 4740] load acl file = D:\usr\sap\put\XYZ\SYS\global\ms_acl_info.DAT
[Thr 4740] MsGetOwnIpAddr: my host addresses are :
[Thr 4740] 1 : [10.10.10.68] houston (HOSTNAME)
[Thr 4740] 2 : [127.0.0.1] houston.monet.local (LOCALHOST)
[Thr 4740] Mon Apr 02 15:07:54 2007
[Thr 4740] MsHttpInit: full qualified hostname = houston.monet.local
[Thr 4740] HTTP logging is switch off
[Thr 4740] MsHttpOwnDomain: own domain[1] = monet.local
[Thr 4740] ms/icf_info_server : deleted
[Thr 4740] *** I listen to port sapmsSHDXYZ (3660) ***
[Thr 4740] CUSTOMER KEY: >B0790292062<
[Thr 4740] Mon Apr 02 15:08:54 2007
[Thr 4740] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from houston_XYZ_60 [msxxserv.c 4679]
[Thr 4740] Mon Apr 02 15:19:35 2007
[Thr 4740] *** ERROR => MsSCheckConnections: no response from client C0 (10.10.10.68) after 300 secs received [msxxserv.c 3165]
[Thr 4740] *** ERROR => MsSCheckConnections: disconnect now [10.10.10.68] [msxxserv.c 3169]</b>
The dev_disp reads:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 60
sid XYZ
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 4036
Mon Apr 02 15:07:53 2007
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (60 4036) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Mon Apr 02 15:07:58 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >houston_XYZ_60 <
DpShMCreate: sizeof(wp_adm) 19888 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05BF0040, size: 4240712)
DpShMCreate: allocated sys_adm at 05BF0040
DpShMCreate: allocated wp_adm at 05BF1A28
DpShMCreate: allocated tm_adm_list at 05BF67D8
DpShMCreate: allocated tm_adm at 05BF6808
DpShMCreate: allocated wp_ca_adm at 05F66A98
DpShMCreate: allocated appc_ca_adm at 05F6B0E8
DpShMCreate: allocated comm_adm at 05F6C858
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05FED708
DpShMCreate: allocated gw_adm at 05FED748
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05FED778
DpShMCreate: allocated wall_adm at 05FED780
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 2039 blocks reserved for free list.
ES initialized.
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c 12314]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( houston) [dpxxdisp.c 11663]
DpStartStopMsg: send start message (myname is >houston_XYZ_60 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Mon Apr 02 15:08:38 2007
ERROR => W0 (pid 1084) died [dpxxdisp.c 14318]
ERROR => W1 (pid 4200) died [dpxxdisp.c 14318]
ERROR => W2 (pid 3316) died [dpxxdisp.c 14318]
ERROR => W3 (pid 5276) died [dpxxdisp.c 14318]
ERROR => W4 (pid 5348) died [dpxxdisp.c 14318]
ERROR => W5 (pid 3436) died [dpxxdisp.c 14318]
ERROR => W6 (pid 3920) died [dpxxdisp.c 14318]
ERROR => W7 (pid 4868) died [dpxxdisp.c 14318]
ERROR => W8 (pid 5380) died [dpxxdisp.c 14318]
ERROR => W9 (pid 4584) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x1f --> 0x1e
ERROR => W10 (pid 4188) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x1e --> 0x1c
ERROR => W11 (pid 2700) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x1c --> 0x18
ERROR => W12 (pid 4604) died [dpxxdisp.c 14318]
ERROR => W13 (pid 4916) died [dpxxdisp.c 14318]
ERROR => W14 (pid 4440) died [dpxxdisp.c 14318]
ERROR => W15 (pid 4544) died [dpxxdisp.c 14318]
ERROR => W16 (pid 1888) died [dpxxdisp.c 14318]
ERROR => W17 (pid 548) died [dpxxdisp.c 14318]
ERROR => W18 (pid 2800) died [dpxxdisp.c 14318]
ERROR => W19 (pid 2080) died [dpxxdisp.c 14318]
ERROR => W20 (pid 2888) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x18 --> 0x10
ERROR => W21 (pid 5572) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x10 --> 0x0
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1609
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 02 15:08:48 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Apr 02 20:08:48 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1084 Ended no 1 0 0
1 DIA 4200 Ended no 1 0 0
2 DIA 3316 Ended no 1 0 0
3 DIA 5276 Ended no 1 0 0
4 DIA 5348 Ended no 1 0 0
5 DIA 3436 Ended no 1 0 0
6 DIA 3920 Ended no 1 0 0
7 DIA 4868 Ended no 1 0 0
8 DIA 5380 Ended no 1 0 0
9 DIA 4584 Ended no 1 0 0
10 UPD 4188 Ended no 1 0 0
11 ENQ 2700 Ended no 1 0 0
12 BTC 4604 Ended no 1 0 0
13 BTC 4916 Ended no 1 0 0
14 BTC 4440 Ended no 1 0 0
15 BTC 4544 Ended no 1 0 0
16 BTC 1888 Ended no 1 0 0
17 BTC 548 Ended no 1 0 0
18 BTC 2800 Ended no 1 0 0
19 BTC 2080 Ended no 1 0 0
20 BTC 2888 Ended no 1 0 0
21 SPO 5572 Ended no 1 0 0
Dispatcher Queue Statistics Mon Apr 02 20:08:48 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
1
1
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 7
wake_evt_udp_now 0
wake events total 3, udp 3 (100%), shm 0 ( 0%)
since last update total 3, udp 3 (100%), shm 0 ( 0%)
Dump of tm_adm structure: Mon Apr 02 20:08:48 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Apr 02 20:08:48 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1609
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 02 15:08:53 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >houston_XYZ_60 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2072) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2072 HANDLE:1580)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1609
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 02 15:08:54 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2072 HANDLE:1580)
DpStartStopMsg: send stop message (myname is >houston_XYZ_60 <)
NiIMyHostName: hostname = 'houston'
AdGetSelfIdentRecord: > <
XYZvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
XYZvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Mon Apr 02 15:08:55 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11976]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1488 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1488 (pos=2)
SiSelNRemove: removed sock 1488
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
XYZvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
XYZvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
XYZvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/22
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1488
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4036) [dpxxdisp.c 10333]
Good Bye .....
<b>The dev_w21 reads:
trc file: "dev_w21", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon Apr 02 15:08:01 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\put\exe\dbmssslib.dll' ...
B Library 'D:\usr\sap\put\exe\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\put\exe\dbmssslib.dll' is "700.08", patchlevel (0.87)
B New connection 0 created
M sysno 60
M sid XYZ
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 95
M intno 20050900
M make: multithreaded, ASCII, optimized
M pid 5572
M
M kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc21 5572) [dpxxdisp.c 1301]
I
I Mon Apr 02 15:08:02 2007
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 19888 (904)
M DpShMCreate: sizeof(tm_adm) 3605136 (17936)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm) 528048 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1280)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 063F0040, size: 4240712)
M DpShMCreate: allocated sys_adm at 063F0040
M DpShMCreate: allocated wp_adm at 063F1A28
M DpShMCreate: allocated tm_adm_list at 063F67D8
M DpShMCreate: allocated tm_adm at 063F6808
M DpShMCreate: allocated wp_ca_adm at 06766A98
M DpShMCreate: allocated appc_ca_adm at 0676B0E8
M DpShMCreate: allocated comm_adm at 0676C858
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 067ED708
M DpShMCreate: allocated gw_adm at 067ED748
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 067ED778
M DpShMCreate: allocated wall_adm at 067ED780
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation view
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host houston
M
M Mon Apr 02 15:08:03 2007
M calling db_connect ...
C Thread ID:4020
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\put\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 87
C patchcomment MSSQL: UTAB/ATAB/Dynp-access via clientside cursor (1002914)
C np:(local) connection used on houston
C CopyLocalParameters: dbuser is 'XYZ_shd'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.1399.06
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Can't use MARS (on sql 8.0). Reconnecting without MARS functionality.
C Using Provider SQLNCLI
C Provider Release:9.00.1399.06
C Using Provider SQLNCLI
C CheckCodepageType: line 24329. hr: 0x80040e37 Invalid object name 'DBPROPERTIES'.
C sloledb.cpp [CheckCodepageType,line 24329]: Error/Message: (err 208, sev 16), Invalid object name 'DBPROPERTIES'.
C Procname: [CheckCodepageType -- no proc]
C Cache sizes: header 52 bytes, 20000 names (26720000 bytes), 500 dynamic statements (2724000 bytes), total 29444052 bytes
C Initializing shared procedure name cache houston_XYZXYZ_XYZ_SHD_MEM.
C procedure cache created/attached
C PSP: 0 procedure names registered
C Connected to db server : [houston] server_used : [np:(local)], dbname: XYZ, dbuser: XYZ
C pn_id:houston_XYZXYZ_XYZ_SHD
C Not using MARS (on sql 8.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070402 150803 houston
C The IRow interface is supported by this OLEDB provider
C sloledb.cpp [ParamStmtExec,line 12988]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared.
C Procname: [##YshoustonXYZ00000055720000000001150803]
C sloledb.cpp [ParamStmtExec,line 12988]: Error/Message: (err 208, sev 16), Invalid object name 'SVERS'.
C Procname: [##YshoustonXYZ00000055720000000001150803]
C ParamStmtExec failed. HR 80040e14 DBSL retcode 103. stmt: [SELECT TOP 1 VERSION FROM SVERS ]
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum: 112156
C DbSlRead - Error 103 (dbcode 208) on open
C DbSlRead - <##YshoustonXYZ00000055720000000001150803>
C DbSlRead - Error 103 (dbcode 208) on fetch
C DbSlRead - <##YshoustonXYZ00000055720000000001150803>
B ***LOG BZA=> table SVERS does not exist on database [dblink#3 @ 1299] [dblink 1299 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10240]
M
M Info for wp 21
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_SPOWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server houston_XYZ_60 on host houston (wp 21)
M * ERROR ThInit: db_connect
M *
M * TIME Mon Apr 02 15:08:03 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10439
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc21 5572) [dpnttool.c 327]</b>
On SDN there are many discussions about similar errors but none
of them fits our situation.
Please give your advice. Points will be given.
Thanks!What is the Kernel level you are using. Try using kernel above 75.
-
Upgrade fails in the phase STARTSAP_TBUPG during the upgrade of CRM 4 to 5
Hello,
Upgrade failed with the below message in the upgrade phase STARTSAP_TBUPG during the upgrade of CRM 4.0 to CRM 5.0
Error Message:
SYSTEM START failed, code -1
-1: 'startsap.exe' returned an error
See file 'D:\usr\sap\put\log\R3up.ECO' for details.
R3up.ECO:
SAPup> Starting subprocess startsap.exe with id 5844 at 20080402142258
EXECUTING D:\usr\sap\put\exe\startsap.exe name=SID nr=00 SAPDIAHOST=Hostname
Environment: dbms_type=mss
Environment: dbs_mss_schema=cdu
STARTSAP failed
Details are written to D:\usr\sap\put\tmp\startSID.log
Process with ID 6276 terminated with status -1
startSID.log
running D:\usr\sap\put\exe\sapstart.exe name=SID nr=00 SAPDIAHOST=Hostname -wait
SAPSTART finished successfully on Host_SID_00, but at least one process doesn't run correctly:
msg_server.exe, MessageServer, Running, 2008 04 02 14:22:58, 0:03:19
disp+work.exe, Dispatcher, Running, Message Server connection ok, Dialog Queue time: 0.00 sec, 2008 04 02 14:22:58, 0:03:19
igswd.exe, IGS Watchdog, Stopped, 2008 04 02 14:22:58, 0:00:00
D:\usr\sap\put\exe\sapstart.exe=>sapparam(1c): No Profile used.
It is trying to start the shadow instance and failing by ending all the work process
DEV_DISP:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid SID
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 150
intno 20050900
make: multithreaded, ASCII, optimized
pid 5348
Wed Apr 02 17:22:10 2008
kernel runs with dp version 234(ext=109) (@(#) DPLIB-INT-VERSION-234)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 5348) [dpxxdisp.c 1245]
shared lib "dw_xml.dll" version 150 successfully loaded
shared lib "dw_xtc.dll" version 150 successfully loaded
shared lib "dw_stl.dll" version 150 successfully loaded
shared lib "dw_gui.dll" version 150 successfully loaded
shared lib "dw_mdm.dll" version 150 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Wed Apr 02 17:22:22 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0100.qqq.nxst) took 12 seconds
Wed Apr 02 17:22:40 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5373]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >HOSTNAME_SID_01 <
DpShMCreate: sizeof(wp_adm) 22968 (1044)
DpShMCreate: sizeof(tm_adm) 3642120 (18120)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05560040, size: 4281040)
DpShMCreate: allocated sys_adm at 05560040
DpShMCreate: allocated wp_adm at 05561B30
DpShMCreate: allocated tm_adm_list at 055674E8
DpShMCreate: allocated tm_adm at 05567518
DpShMCreate: allocated wp_ca_adm at 058E0820
DpShMCreate: allocated appc_ca_adm at 058E4E70
DpShMCreate: allocated comm_adm at 058E65E0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05967490
DpShMCreate: allocated gw_adm at 059674D0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05967500
DpShMCreate: allocated wall_adm at 05967508
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2039 blocks reserved for free list.
ES initialized.
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c 12553]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( HOSTNAME) [dpxxdisp.c 11867]
DpStartStopMsg: send start message (myname is >HOSTNAME_SID_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 150
Release check o.K.
Wed Apr 02 17:23:20 2008
my types changed after wp death/restart 0x1f --> 0x1e
my types changed after wp death/restart 0x1e --> 0x1c
my types changed after wp death/restart 0x1c --> 0x18
my types changed after wp death/restart 0x18 --> 0x10
my types changed after wp death/restart 0x10 --> 0x0
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:30 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Apr 02 11:53:30 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 6916 Ended no 1 0 0
1 DIA 7724 Ended no 1 0 0
2 DIA 6044 Ended no 1 0 0
3 DIA 4300 Ended no 1 0 0
4 DIA 6992 Ended no 1 0 0
5 DIA 2412 Ended no 1 0 0
6 DIA 432 Ended no 1 0 0
7 DIA 8168 Ended no 1 0 0
8 DIA 5420 Ended no 1 0 0
9 DIA 9712 Ended no 1 0 0
10 UPD 4320 Ended no 1 0 0
11 ENQ 3476 Ended no 1 0 0
12 BTC 2676 Ended no 1 0 0
13 BTC 6816 Ended no 1 0 0
14 BTC 9636 Ended no 1 0 0
15 BTC 8356 Ended no 1 0 0
16 BTC 7004 Ended no 1 0 0
17 BTC 7284 Ended no 1 0 0
18 BTC 10048 Ended no 1 0 0
19 BTC 4560 Ended no 1 0 0
20 BTC 4196 Ended no 1 0 0
21 SPO 4268 Ended no 1 0 0
Dispatcher Queue Statistics Wed Apr 02 11:53:30 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
1
1
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 7
wake_evt_udp_now 0
wake events total 3, udp 3 (100%), shm 0 ( 0%)
since last update total 3, udp 3 (100%), shm 0 ( 0%)
Dump of tm_adm structure: Wed Apr 02 11:53:30 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Apr 02 11:53:30 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:35 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >HOSTNAME_SID_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1860) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1860 HANDLE:1448)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:36 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1860 HANDLE:1448)
DpStartStopMsg: send stop message (myname is >HOSTNAME_SID_01 <)
NiIMyHostName: hostname = 'HOSTNAME'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Apr 02 17:23:37 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12213]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1356 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1356 (pos=2)
SiSelNRemove: removed sock 1356
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/22
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1356
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5348) [dpxxdisp.c 10461]
Good Bye .....
Please help me in resolving this issue
Thanks,
VadiHi Suhas,
Have checked the hostname and it is correct.
I am getting the below output When i run r3trans -x
This is r3trans version 6.14 (release 700 - 04.03.08 - 16:43:00).
r3trans finished (0000).
I could see the below error message in dev_W21
ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'sid_shd' setuser 'sid_shd']
C sloledb.cpp [ExecuteAndFlush,line 6470]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'cdu_shd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'cdu_shd' failed -- connect terminated
C failed to establish conn. 0
Thanks,
Vadi -
ERROR:
SEVERE ERROR: error 10 during start of RSUPGCUAGEN111
BATCHJOB RSUPGCUAGEN111 FAILED
SEVERE ERROR: calling CUA GEN failed - repeat phase
Log File:
1 ETQ201XEntering upgrade-phase "JOB_RSUPGCUA_TBUPG" ("20070621104627")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399 dbs_mss_schema=bcp
4 ETQ399 auth_shadow_upgrade=0
4 ETQ260 Starting batchjob "RSUPGCUAGEN111"
4 ETQ010 Date & Time: 20070621104627
4 ETQ260 Starting batchjob "RSUPGCUAGEN111"
4 ETQ230 Starting RFC Login to: System = "BCP", GwHost = "Irving", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="BCP", Nr="00", GwHost="Irving", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
2EETQ235 Call of function module "SUBST_START_BATCHJOB" by RFC failed (error-status "10")
2EETQ261 Start of batchjo
For the above Error. I have found the solution below:
Please try to logon with DDIC user in client 000 of E02 system on host 'sapdev30' instance 00 ? Is the logon ok?
If so, you may stop the SAPup program and then inform the password of DDIC once again to sapup with the command 'SAPup set DDICpwd'
Afterwards, repeat the phase.
Can anyone explain How to implement above Solution.HI,
<u><b>"dev_disp",</b></u>
trc file: "dev_disp", trc level: 1, release: "700"
sysno 77
sid BCP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 3044
Tue Jul 10 10:57:02 2007
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (77 3044) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Tue Jul 10 10:57:06 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >Irving_BCP_77 <
DpShMCreate: sizeof(wp_adm) 11264 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06E40040, size: 4646328)
DpShMCreate: allocated sys_adm at 06E40040
DpShMCreate: allocated wp_adm at 06E41E40
DpShMCreate: allocated tm_adm_list at 06E44A40
DpShMCreate: allocated tm_adm at 06E44A70
DpShMCreate: allocated wp_ca_adm at 07213D10
DpShMCreate: allocated appc_ca_adm at 07219AD0
DpShMCreate: allocated comm_adm at 0721BA10
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0729C8D0
DpShMCreate: allocated gw_adm at 0729C910
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0729C940
DpShMCreate: allocated wall_adm at 0729C948
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 894 blocks reserved for free list.
ES initialized.
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c 12237]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
***LOG Q0K=> DpMsAttach, mscon ( Irving) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >Irving_BCP_77 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Tue Jul 10 10:57:07 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Tue Jul 10 10:57:46 2007
ERROR => W0 (pid 3988) died [dpxxdisp.c 14241]
ERROR => W1 (pid 3208) died [dpxxdisp.c 14241]
ERROR => W2 (pid 852) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0x1f --> 0x1e
ERROR => W3 (pid 3680) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0x1e --> 0x1c
ERROR => W4 (pid 3480) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0x1c --> 0x18
ERROR => W5 (pid 192) died [dpxxdisp.c 14241]
ERROR => W6 (pid 1372) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0x18 --> 0x10
ERROR => W7 (pid 1992) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0x10 --> 0x0
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Jul 10 10:57:56 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Tue Jul 10 15:57:56 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3988 Ended no 1 0 0
1 DIA 3208 Ended no 1 0 0
2 DIA 852 Ended no 1 0 0
3 UPD 3680 Ended no 1 0 0
4 ENQ 3480 Ended no 1 0 0
5 BTC 192 Ended no 1 0 0
6 BTC 1372 Ended no 1 0 0
7 SPO 1992 Ended no 1 0 0
Dispatcher Queue Statistics Tue Jul 10 15:57:56 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
1
1
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 7
wake_evt_udp_now 0
wake events total 3, udp 3 (100%), shm 0 ( 0%)
since last update total 3, udp 3 (100%), shm 0 ( 0%)
Dump of tm_adm structure: Tue Jul 10 15:57:56 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Tue Jul 10 15:57:56 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Jul 10 10:58:01 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >Irving_BCP_77 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (424) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:424 HANDLE:1636)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Jul 10 10:58:02 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:424 HANDLE:1636)
DpStartStopMsg: send stop message (myname is >Irving_BCP_77 <)
NiIMyHostName: hostname = 'Irving'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Tue Jul 10 10:58:03 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11899]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1600 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1600 (pos=2)
SiSelNRemove: removed sock 1600
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1600
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3044) [dpxxdisp.c 10259]
Good Bye .....
<b><u>dev_w0 LOG FILE</u></b>
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Tue Jul 10 10:57:07 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\put\exe\dbmssslib.dll' ...
B Library 'D:\usr\sap\put\exe\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\put\exe\dbmssslib.dll' is "700.08", patchlevel (0.72)
B New connection 0 created
M sysno 77
M sid BCP
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 75
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 3988
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3988) [dpxxdisp.c 1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 11264 (1408)
M DpShMCreate: sizeof(tm_adm) 3994272 (19872)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1440)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 07640040, size: 4646328)
M DpShMCreate: allocated sys_adm at 07640040
M DpShMCreate: allocated wp_adm at 07641E40
M DpShMCreate: allocated tm_adm_list at 07644A40
M DpShMCreate: allocated tm_adm at 07644A70
M DpShMCreate: allocated wp_ca_adm at 07A13D10
M DpShMCreate: allocated appc_ca_adm at 07A19AD0
M DpShMCreate: allocated comm_adm at 07A1BA10
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 07A9C8D0
M DpShMCreate: allocated gw_adm at 07A9C910
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 07A9C940
M DpShMCreate: allocated wall_adm at 07A9C948
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host Irving
M
M Tue Jul 10 10:57:08 2007
M calling db_connect ...
C Thread ID:2972
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\put\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 72
C patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
C np:(local) connection used on IRVING
C CopyLocalParameters: dbuser is 'bcp_shd'
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: MARS property was not set.
C Provider Release:08.10.1830
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C CheckCodepageType: line 24189. hr: 0x80040e37 Invalid object name 'DBPROPERTIES'.
C sloledb.cpp [CheckCodepageType,line 24189]: Error/Message: (err 208, sev 16), Invalid object name 'DBPROPERTIES'.
C Procname: [CheckCodepageType -- no proc]
C Cache sizes: header 68 bytes, 20000 names (31520000 bytes), 500 dynamic statements (2844000 bytes), total 34364068 bytes
C Initializing shared procedure name cache IRVING_BCPBCP_BCP_SHD_MEM.
C procedure cache created/attached
C PSP: 0 procedure names registered
C Connected to db server : [IRVING] server_used : [np:(local)], dbname: BCP, dbuser: bcp
C pn_id:IRVING_BCPBCP_BCP_SHD
C Not using MARS (on sql 8.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070710 105708 IRVING
C The IRow interface is supported by this OLEDB provider
C sloledb.cpp [ParamStmtExec,line 12849]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared.
C Procname: [##YsIRVINGbcp00000039880000000001105708]
C sloledb.cpp [ParamStmtExec,line 12849]: Error/Message: (err 208, sev 16), Invalid object name 'SVERS'.
C Procname: [##YsIRVINGbcp00000039880000000001105708]
C ParamStmtExec failed. HR 80040e14 DBSL retcode 103. stmt: [SELECT TOP 1 VERSION FROM SVERS ]
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum: 112300
C DbSlRead - Error 103 (dbcode 208) on open
C DbSlRead - <##YsIRVINGbcp00000039880000000001105708>
C DbSlRead - Error 103 (dbcode 208) on fetch
C DbSlRead - <##YsIRVINGbcp00000039880000000001105708>
B ***LOG BZA=> table SVERS does not exist on database [dblink#3 @ 1299] [dblink 1299 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10156]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server Irving_BCP_77 on host Irving (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Tue Jul 10 10:57:08 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3988) [dpnttool.c 327] -
Error during the upgrade phase "start_shdi_first"
Hello,
We are having issue with upgrading r/3 4.7 enterprise extension set to ECC 6.0
Here the error message goes....
starting system failed rc=0
to analyse the error during start of shadow instance
view files 'Startsfi.log' and 'devtrace.log'
in directory usr\..put
repeat phase until shadow instance is started
and u can logon instance no '01'"
We have changed the DDIC password during upgrade.after that we ran the initphase to update the password.
I think sapup is referring the old password which was entered initially during the upgrade and we dont remember the old password also.
Appreciate your response
Startsfi.log
1 ETQ201XEntering upgrade-phase "START_SHDI_FIRST" ("20080218175653")
2 ETQ366 Connect variables are set for shadow instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399 dbs_mss_schema=de4
4 ETQ399 auth_shadow_upgrade=1
4 ETQ399 Set environment for shadow connect:
4 ETQ399 ENV: dbs_mss_schema=de4
4 ETQ399 ENV: auth_shadow_upgrade=1
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SWITCH"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2 ETQ353 Starting system
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finally
2EETQ399 Dialogue: ERROR
2EETQ399 Starting system failed, rc=0
DEVTRACE:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid DE4
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 111
intno 20050900
make: multithreaded, ASCII, optimized
pid 2272
Mon Feb 18 16:08:40 2008
kernel runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2272) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 111 successfully loaded
shared lib "dw_xtc.dll" version 111 successfully loaded
shared lib "dw_stl.dll" version 111 successfully loaded
shared lib "dw_gui.dll" version 111 successfully loaded
shared lib "dw_mdm.dll" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Mon Feb 18 16:08:52 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0065.qqq.nxst) took 12 seconds
Mon Feb 18 16:09:10 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >MTW02SDEC01_DE4_01 <
DpShMCreate: sizeof(wp_adm) 19976 (908)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 065C0040, size: 4241064)
DpShMCreate: allocated sys_adm at 065C0040
DpShMCreate: allocated wp_adm at 065C1B30
DpShMCreate: allocated tm_adm_list at 065C6938
DpShMCreate: allocated tm_adm at 065C6968
DpShMCreate: allocated wp_ca_adm at 06936BF8
DpShMCreate: allocated appc_ca_adm at 0693B248
DpShMCreate: allocated comm_adm at 0693C9B8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 069BD868
DpShMCreate: allocated gw_adm at 069BD8A8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 069BD8D8
DpShMCreate: allocated wall_adm at 069BD8E0
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2046 blocks reserved for free list.
ES initialized.
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c 12437]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( MTW02SDEC01) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >MTW02SDEC01_DE4_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
Mon Feb 18 16:09:13 2008
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 4724] Mon Feb 18 16:08:40 2008
[Thr 4724] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 110
intno 20050900
make: multithreaded, ASCII, optimized
pid 5420
[Thr 4724] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 5420) [msxxserv.c 1824]
[Thr 4724] MsInitAclInfo: acl file D:\usr\sap\put\DE4\SYS\global\ms_acl_info.DAT not found, unrestricted access
[Thr 4724] MsGetOwnIpAddr: my host addresses are :
[Thr 4724] 1 : [172.20.28.159] MTW02SDEC01.mindsap.com (HOSTNAME)
[Thr 4724] 2 : [127.0.0.1] MTW02SDEC01.mindsap.com (LOCALHOST)
[Thr 4724] MsHttpInit: full qualified hostname = MTW02SDEC01.mindsap.com
[Thr 4724] HTTP logging is switch off
[Thr 4724] MsHttpOwnDomain: own domain[1] = mindsap.com
[Thr 4724] ms/icf_info_server : deleted
[Thr 4724] *** I listen to port sapmsSHDDE4 (3601) ***
[Thr 4724] CUSTOMER KEY: >J1537289841<
trc file: "dev_rd", trc level: 1, release: "700"
Mon Feb 18 16:09:10 2008
***LOG S00=> GwInitReader, gateway started ( 2344) [gwxxrd.c 1694]
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 110
intno 20050900
make: multithreaded, ASCII, optimized
pid 2344
gateway runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
Bind service sapgw01 (socket) to port 3301
GwPrintMyHostAddr: my host addresses are :
1 : [172.20.28.159] MTW02SDEC01.mindsap.com (HOSTNAME)
2 : [127.0.0.1] MTW02SDEC01.mindsap.com (LOCALHOST)
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
DpShMCreate: sizeof(wp_adm) 19976 (908)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06110040, size: 4241064)
DpShMCreate: allocated sys_adm at 06110040
DpShMCreate: allocated wp_adm at 06111B30
DpShMCreate: allocated tm_adm_list at 06116938
DpShMCreate: allocated tm_adm at 06116968
DpShMCreate: allocated appc_ca_adm at 0648B248
DpShMCreate: allocated comm_adm at 0648C9B8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0650D868
DpShMCreate: allocated gw_adm at 0650D8A8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0650D8D8
MtxInit: -2 0 0
Mon Feb 18 16:09:14 2008
GwDpInit: attached to gw_adm at 0650D8A8
Thanks,
VadiDear All,
The issue has been resolved by changing the DDIC password to what it was when we have started the upgrade.The password was "welcome" when we have started with upgrade after that it has been changed to
"basis05" during upgrade.we changed it back to welcome and it started working fine.
Here it took long time to find out what was the password when we have starte upgrade.Resetting to standard ddic password also ddint help out in our case.
Thanks for all your replies. -
Call Manager 8.0 to 9.1 upgrade
We are currently running Call Manager 8, UCCE 8, and CVP 8. ICM/CTI 8.
We would like to upgrade Call Manager 8 to 9.1 first before upgrading UCCE, CVP, etc., it could be months before these are upgraded.
Does anyone know or foresee any issues if UCCE, CVP, etc., are not upgraded right away after CM is upgraded?
Any comment is appreciated. Thanks.Look at the UCCE compatibility matrix as you need the exact versions to find out whether they will work together, of ir you'll need a single window on which to upgrade all.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
Maybe you are looking for
-
My Windows 7 PC just had to be reformatted, and I have retrieved all of my files from an external hard drive. About half of my iTunes library is working fine, the other half pop up the error statement "original file cannot be located." If they have
-
StreamigHow to get audio component of Video out of AirPort/stereo using MBA
Ok will some one help me with this please: I was experimenting with streaming video. I was watching Leo Laporte's TWiT Live show http://twit.tv/roz13 where he was talking to Roz Savage the woman who is rowing across the Pacific alone ! This was live
-
Regarding j2sdk-1_4_2_17-windows-amd64.exe vsersion?
Hi guys, I am sreeramulu konjeti....i want j2sdk-1_4_2_17-windows-amd64.exe vsersion for EHP1 Installation can any one tell where i can get this version? Thanks & Regards sreeramulu konjeti
-
How do I get icloud to work on mac osx v10.6?
My computer, MAC OSX v10.6.8 is not showing an icloud icon in Preferences. It has a mobil me icon but when clicked it says it has been moved to icloud. My ipad, iphone and Mac are not syncing. Help!
-
Page Items from parent related table (readonly - only display)
Hi, is this possible in APEX 5.0? DB Strucktur: Customer (Fields: Name, Address, Postal Code ...) 1:n Contacts (Firstname, Lastname, customer_id, ...) I need a Form (Contact): Firstname: Lastname: Address: Readonly Items from Customer Table (only dis