Upgrading iOS 4.0 to 4.1 (Connection time out error)

Hello any help will be highly appreciated..
I currently have a 3rd gen iPod Touch 32gb, with iOS 4.0.2 installed and working perfectly. I am now pestered to download and update to the newest version 4.1 every time I sync my iPod, which I have no problem doing..
Problem is every time I agree to download this update iTunes downloads the update then when it has just finished downloading (remains in the "downloads" in itunes folder) appears that it is processing the download, after about 4 minutes of it finsihing downloading and appearing to be processing it gives me an error saying there is a connection time out issue, to check my internet connection and try again.
I have tried at least 1 dozen,or more times to do this. It has done the same thing every time.
It won't let me restore my iPod because when i try to do so it asks me to "Update and Restore" which it cant update! so its pretty frustrating.
The iPod works fine no problems, it just comes to when trying to download this update.
Is there anything I can do? Would I be able to try and update it on another computer?
Thank you for any assistance, im just sick of seeing the "a new ipod update is a vailable, download now?" pop-up every time I plug in the iPod.

Hello!
Been encountering the same problem for two days, drove me crazy! Tried everything, including disabling the firewall and antivirus but nothing worked, so here is what worked with me:
*If you use Internet Explorer, do the following:*
*First close iTunes then go to Internet Explorer > Tools > Internet Options > Advanced Tab and then scroll until you get to the ''Security'' section, uncheck the box that says: Check for server certificate revocation* and now launch iTunes and try again.* Hope this works for you as well!

Similar Messages

Connection time out error in server proxy

Hi
My scenario is file to proxy. . It is synchronous scenario.
I am giving wait time as input and in the proxy i wrote a code to wait till the inputed value and after that send a response. it is working fine only if i give less than 60 sec.
If i specify above 60 sec i am getting the connection time out error in SXMB_MONI.
Please help me to solve this.
Regards
Divia

To increase Timeout use
Go to transaction SMICM........ Goto->services......choose HTTP.....edit this service.........increase maximum processing time and activate this service
look blog for timeouts:
The specified item was not found.

Connection time out error in HTTP

Hey guys
i m getting connection time out error in a HTTP scenario,when i go in SXMB_ADM i dont find any entry with the name HTTP_TIMEOUT.
even in RZ10 i cant find the correct profile parameter.
i m taking help from michaels blog
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
i m on PI7.0 SP09
is there some other place i can find this entry? or do i need to ask the basis guys to add it?
thanx
ahmad

Also, there may be other factors to consider depending on your scenario. If you don't have it already, look at the latest <a href="http://service.sap.com/~sapidb/011000358700005909032005E/XI30XI70_TroubleGuide.pdf">XI Troubleshooting Guide</a> - Section 9.2 on "Timeouts in XI".
Regards,
Jin

Connection time out error

Hello sir,
Whenever i install addon on SAP B1 i get connection time out error can anyone help me

Manish,
it depends on how you set your connection. it must be through command line argument. if you have set your connection string as
sConnectionString = "0030002C0030002C00530041005000420044005F00440061007400650076002C0050004C006F006D0056004900490056"
then change it to
sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
and give the connection string 0030002C0030002C00530041005000420044005F00440061007400650076002C0050004C006F006D0056004900490056 as your command line argument in project properties -- Debug tab. prepare the addon ard and try installing it.
regards,
Binita

SOAP Adapter: Connection time out error

Hi Guys,
I do it one scenario for Proxy to webservice Asynchronous . I have send the input details through Proxy. In Sxmb_Moni shows success message. But Receiver side doesn't reach the payload. Because receiver side (Soap Adapter) shows connection time out error. But i have given correct URL and SOAP Action in receiver communication channel. Please give some suggestions to solve that issues. Please don't refer links.
Thanks & Regards
Vijay

hi
this is a time out error
increase the timeout value by specifying the parameter
XI.Timeout in the module parameter of soap Adapter
OR
1. This is because of TimeOut. The default timeout value for synchronous calls is 5
minutes. You can increase this value by setting parameter XI.Timeout in the module parameter table of
the SOAP adapter. The value must be given in milliseconds. For example, value 600000
represents the timeout value of 10 minutes. This parameter is not recognized in systems prior to SP13.
2.The Other Options is send the queue id with your request message.
http://host:port/XISOAPAdapter/MessageServlet?channel=p:s:c
&version=3.0&...&QueueId=xxxxxxxxxxxxxxxx
where xxxxxxxxxxxxxxxx is an ABAP queue ID.
3.Check your RWB message monitoring.
Is there any system failure message and holding message be there.
If then clear the messages.
4. Increase the time out parameter for HTTP in your altova xml spy.Defaultly it will be very low.

Connection time out error when calling a webservice on ICF

Hi
We have a webservice exposed on ECC 5.0 on the ICF. However, when we invoke the webservice - after 10 seconds , we get a error message
Error reading server response: The operation has timed-out
I checked ICMAN parameters
icm/conn_timeout - and set its new value to 50000 ms ( 50 secs ) - the connection still timed out when the webservice tooks more than 10 seconds to process.
icm/keep_alive_timeout - I don't see an option to change the new value for this parameter
What am i missing here - how can I set the connection not to time out uptil say 45 seconds - what parameter do I change here ?

I partly agree with Kaustubh,
if you test the service from within SICF the parameter SAPLOCALHOSTFULL (FQHN = Fully-Qualified Host Name) is taken to build the test URL. If this host name is not correct resp. cannot be resolved by the server, you will run into an error.
icm/host_name_full is only taken if SAPLOCALHOSTFULL is not maintained.
So first of all you shold check this parameter befor increasing timeout parameters at random.
If the parameter does not solve the problem, you should have a look into the ICM trace file (dev_icm) and search for "ERROR".
Regards,
Stefan

Everytime I try to update my 3rd generation ipod touch to iOS 5, I get a connection time out error after the software is downloaded?

Everytime I try to update my 3rd generation Ipod touch to iOS 5, I get a connection timeout message after the software has completely downloaded and is finishing?

DIsable the computer's security software (antivirus and firewall) during the download and update.

I'm trying to download iOS 5.0.1 and my connection times out

I use Windows 7 with my iTunes and I've gotten this error with my 4th generation iTouch as well as my wife's new iPhone 4S. For the iTouch, I've gotten this error ever since this new update has been available. Not sure how to fix. I have updated my iTunes to 10.5.
Thanks.

disable your firewall/security software.

500 connection time out error in web report(portal)

Hi Experts,
Points to note about the 500 connection
timeout error
1. Error persists only in portal. query/
report works fine in RSRT and Bex Analyser.
2.As per previous discussions tried
implementing SAP notes to change ICM parameter for max of 10 minutes.
However, it is said by Basis team that they
can change parameter only if all the report gives the same error.
Since all the report works fine they are nt
ready to change the parameter.
4. Error: Time exceeds 600seconds
5.This issue arised only after upgrading
the system to 7.3. post - upgrade. this report was working fine before.
6. Even in the portal, report works fine
when we use ABAP web link.
In the trace file there is a error message
for this report "Could not find a command, masscommand or group command
with alias <new task>. It is defined in group .
<TaskCollectionGroup>. pls any one help me. This is for 7.31 NW portal
Please suggest ur thoughts

Thanks. I will check on this once I get reply from the corresponding team. However, need another advice.
There are issues in portal where some buttons (delete, undo, copy/paste - IP funcitonalities) are not working. When we find java script in the background is not working properly. there is no sequence of call in the java script after upgrade. In trace, for some reports with this issue has same error like "could not find command..." . My question is .. is there any possibility that these java scripts corrupt occurs because of this KM components?

Error in firmware cFP 2020 & connection time out error in MAX

Hi!
My cFP 202O status LED is flashing twice - which indicates that there is an error in the firmware (according to the user manual). I've already installed the latest firmware downloaded from the NI website and it says that I'm suppose to update the OS from remote system in MAX. When trying to update the BIOS system, this comes up.
Version on the remote target : 10.1
Available version on the host : 10.4
I'm a little confused as to which is the remote target and which is the hosting system? It also says that the previously installed software will be removed if update is continued and that it might damage the hardware if manually booted or turned off so I'm a little skeptical to proceed.
I'm alsoreceiving error messages in MAX. Errors in MAX are 'Connected - No software installed' and connection to a remote device timed out. I'm wondering if this error occurs because of the firmware problem or is it because of the timeout settings? Which is better? A higher or lower timeout time?
I'm new with this. Any info is greatly appreciated! Thanks!!!
Solved!
Go to Solution.

The target is your compact Fieldpoint. The host is your PC that you are on. Since the PC has a newer version, you will want to have that software downloaded to the cFP by way of MAX. Of course there is a slight chance you could lose power to the cFP if your luck is bad and the power goes out in the middle of the upgrade. It would be best to have your power supply for the cFP running off a battery backup UPS for security.
I'm guessing the error is due to your firmware problem.
If you are really uncertain on how to proceed, it may be best if you contact NI directly and they could help walk you through the update process.

ITunes Match network connection time out error

I have just signed up to itunes match but at the end of step 1 I get a network connection error at the 'Waiting for apple to deliver your results' stage every time.
I have tried everything suggested on forums regaring unticking proxy server settings and turning off firewall but nothing works.
I have run diagnostics on itunes and it is coming up with two anomolies. It is giving me a 'cannot make secure connection to itunes store' error although I can connect to itunes store I am wondering whether this is causing the problem with itunes match.
It is also stating in the diagnostics report that 'current user is not an administrator' although I am logged on with an adminstrator account on windows 7 64bit.
If anyone can point me in the right direction to sort this problem i would be very grateful.

Great thanks. I am using NOD32 so hopefully that will be the culprit. I will try this later when i get home as you have to restart the PC in safe made to uninstall ESET and I can't do that over a VPN link.
I was thinking of getting rid of ESET anyway as it is a bit cpu hungry. I was thinking of just using the windows firewall and AV. Did you reinstall ESET after itunes match worked? And did it still continue to work if you did?
Sorry to bombard you with questions!
Thanks again.

Network connection / time out errors

I am uploading a large number of photos to the internet. After a while (when not using my computer), I have a network connection error and the photos stop uploading. Do you have a solution to stop these errors when not using the computer?
If I was using the computer, this would not be a problem. It seems the computer may have gone to sleep and ceased the internet connection

What is your cellular reception level when this occurs?
Since a reset and restoring your iPhone with iTunes has not resolved it, I would give AppleCare a call at (800) 694-7466. After you explain the problem and what you have already tried to resolve it, the person you speak with will probably contact AT&T technical support as a conference call.

When I search, it takes a long time and then I get a connection time out error. What do I do?

error: cannot communicate with bing.com (204.152.194.204)

Bring up System Preferences and look at the bottom of the window. If there is software listed there, make sure you have the latest version that runs on OS X 10.7 Lion. Then go into users and look at login items. Same thing, ensure that any software listed there is at a level to run with OS X 10.7 Lion.
While Lion has a minimum requirement of 2GB of memory, 4GB is recommended.

Message Mapping - connection time out

Hi ,
I hae just created a message mapping and when I click on Test tab and load a payload in source and try to test the mapping , it gives me connection time out error from java...
What could be wrong ? Mapping involves an XML to IDOC .
Cheers,

Hello,
I think so (Experts, please correct me if I'm wrong). Before, we had a scenario in which the external definition was about 960kb. It really did post issues when testing in the message mapping itself. There are three options:
a.) Use less detail in your sample message mapping, in this way you can correct the error in the mapping itself.
or
b.) Test in operation mapping, and then do the correction in message mapping afterwards. If the testing is successful, make sure that you don't click the drop down icon. Instead, export the result as a zip file and then extract it. (if this hangs, go for c)
or
c.) Test at runtime
Hope this helps,
Mark
Edited by: Mark Dihiansan on Dec 20, 2010 10:09 AM

Getting Connection Time out while connecting and with tnsping

Hello Experts,
I am new to Oracle world, so please go easy on me.
I installed Oracle 11 XE on Centos 6.4 VM. followed the official installation procedure and database was installed without any errors.
I am able to login to database through sqlplus and able to run sql queries.
Problem comes when i am trying to connect from sql developer or external application. i get Connection Time out error.
Below are the tnsnames.ora and listener.ora file content
# tnsnames.ora Network Configuration File:
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = basevm)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
# listener.ora Network Configuration File:
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = /u01/app/oracle/product/11.2.0/xe)
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
      (ADDRESS = (PROTOCOL = TCP)(HOST = basevm)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
lsnrctl stat shows service stats as UNKNOWN and tnsping also fails
bash-4.1$ lsnrctl stat
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 11-JUN-2013 02:00:48
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date                10-JUN-2013 19:39:03
Uptime                    0 days 6 hr. 21 min. 45 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Default Service           XE
Listener Parameter File   /u01/app/oracle/product/11.2.0/xe/network/admin/listener.ora
Listener Log File         /u01/app/oracle/diag/tnslsnr/sagbase/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=basevm)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
bash-4.1$ tnsping xe
TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 11-JUN-2013 02:01:16
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = basevm)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = XE)))
TNS-12535: TNS:operation timed out
I am stuck and don't know where else to check.
Could you guys please help me out here?
Thanks.

That tnsping error indicates several possible problems, most related to the setup for the client. Or network setup on the database server host.
Connecting to a database using sqlnet requires three things, the database host, the listener port, and the ORACLE_SID or instance SERVICE_NAME.
The tnsping utility is only concerned with the first two items, host and port. It will not perform an actual connection, and will not verify the tnsalias ORACLE_SID or SERVICE_NAME values.
An "OK" result from tnsping verifies that the specified host has a listener running at the specified port and it is servicing connections.
Since you're not getting an "OK" from tnsping, could be something is blocking the connection (i.e. firewall), the host= specification is not correct, or the port= spec is not correct. Note that host= must either be a valid and correct hostname, or a an IPv4 address. If IPv6 is in the mix, only the correct hostname will work. A hostname that resolves correctly.
Look at your network interface setup on the host, find its IP address, make sure the IP will `ping`, and try a new sqlnet.ora entry with the IPv4 address.
ifconfig -a
<interface>: flags=...
inet n.n.n.n
# in sqlnet.ora:
xe2 = ... host=n.n.n.n ...
tnsping xe2
... ok? ...

Upgrading iOS 4.0 to 4.1 (Connection time out error)

Similar Messages

Maybe you are looking for