Upgrading ios from 4.1 to 4.3.3

hi,
I have a iphone 4g. Recently I upgrade ios from 4.1 to 4.3.3. Now some priveously installed application, dose not work. How can i solve this problem? Thanks

yes, you need to plug it into a computer and upgrade through iTunes, but you will be ugraded to the most recent iOS 7.0.6, which is fine.

Similar Messages

  • I want to upgrade iOS from 5 to 6, but when I go to synch everything in preparation, it tells me I will lose all my stuff on the iPhone and iPad which is unique.  How can I backup or do a "real synch" (both sides have same data) and then upgrade?

    I want to upgrade iOS from 5 to 6, but when I go to synch everything in preparation, it tells me I will lose all my stuff on the iPhone and iPad which is/are  unique.  How can I backup or do a "real synch" (both sides have same data at end of process) and then upgrade?

    You should really read the manual.
    "How do you restore from backup? "
    Restore.  When given the choice, choose to use backup.
    "And how can I check to see if the pics and videos are on my computer somewhere first??"
    They would only be where you put them.  What program did you use to import them?  Pics/vids taken with ipod are not part of the sync process at all.  You should be importing them just as you would with any digital camera.
    If you did not import them, then they are not on your computer.

  • An i4 MC603ZA cant upgrade iOS from 4.2.1 to 4.3.2 and show "This device isn't eligible for the requested build"

    An i4 MC603ZA cant upgrade iOS from 4.2.1 to 4.3.2 and show "This device isn't eligible for the requested build"

    Back up your iphone. Erase all content and settings and try to update again. Also on you computer make sure your signed in as the administrator and All antivirus and firewalls are disabled. http://support.apple.com/kb/ts4451

  • When I would like to upgrade my iPad2 at software update of general at settings, loading logo onscreen for hours with no progress. The goal is to upgrade iOS from 5 to 7.0.1. Any good solution for that?

    When I would like to upgrade my iPad2 at software update of general at settings, loading logo onscreen for hours with no progress. The goal is to upgrade iOS from 5 to 7.0.1. Any good solution for that?

    Connect it to the charger unit as instructed by Apple.
    Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support

  • Iphone 4s upgraded IOS from 5.1.1 to 6.1.1. WIFI it's unusable. Phone it's connected, but doesn't navigate.... or navigate like a SNAIL.

    HI, Sorry for my BAD english, I'm Italian. I have an Iphone 4s.. four day ago, I upgraded my IOS from 5.1.1 to 6.1.1 (thinking that 6.1.1 was mature). This is WORST decision I was made. WIFI it's unusable. iPhone it's connected, but doesn't navigate.... or navigate like a SNAIL.
    I'm a computer technician and cisco CCNP... after some speedy try, I was able to use WIFI with WEP and not with WPA....
    Best result was with an 802.11/B AP  with 128bit WEP (no problem at ALL).......  I think there is a problem IOS - WPA and 802.11G AP...
    I hope this can help some user...... for me it's absolutely USELESS info because all my customer uses different AP with different encription so I CAN'T use anymore my phone.... I switch to galaxy sIII until apple resolve this issue.
    I'm an apple fan since 1987 (MY MAC II)  and NEVER has problem or problem was immediately resolved but
    on last THREE year, apple was made some mistake.... using CUSTOMER as TESTER....
    After 20 year of apple, if all continue so. I MUST abandon APPLE.

    I know that only some iphone 4s are affected by this problem but....
    before write, please CONNECT BRAIN and verify your info...
    So .... My brain and my iPhone are working, Yours are not.
    for your reference, HALF internet (including APPLE support ) are FULL of post regarding this issue....
    Do you actually knows how big the Internet is? Do you also know how many iPhones is out there?
    Stop BS.
    I'm an iphone fan since FIRST MODEL (2007) and an APPLE fan since MACII..
    My post would be a temporary solution for who are affected by this issue, for use wifi until apple fix it..
    I don't care what you have used since bla bla that won't change the facts.
    you don't know my skill so.... be propositive instead of....
    You don't know mine either
    Message was edited by: ckuan

  • Upgrade IOS from 3.1.3 to 4x on my 3G was my mistake!! SLOW!!!!!!!!!

    I should've done my homework before I ugraded IOS from 3 to 4 on my 3G. Apparently, I'm one of thousands having this issue. My iPhone was screaming before I upgraded with same amount of apps, etc. and as soon as I upgraded, I immediately noticed something wrong. 5-6 second to bring up contacts, texting is sluggish..have to wait till characters render while I type!!! I moved from Blackberry to iPhone...I hope Apple is taking this seriously to keep their customers. I'm about to switch back!!!!

    No kidding. This was Apple's biggest mistake of the past few years. My iPhone 3G is essentially unusable. Launching an app works as fast as previously, but once IN that App I typically can't do anything for anywhere from 10 to 45 seconds. Swiping pages of apps can be slow - or completely unresponsive. EVERYTHING is sluggish. Forget going back - I'm moving to Android if Apple can't fix this. And so far I've gotten ZERO response from anyone.

  • HT1349 Hi...need help to activate 3GS after upgrading ios from 4.1.0 to 6.0.1

    Hi...I have a 3GS and after upgrading the ios i am unable to activate the iPhone..its repeatedly giving the same error as "Your iPhone could not be activated because the actuvation server is temporarily unavailable.Try connecting your iPhone to iTunes to activate it. If this problem persists, contact Apple Support at apple.com/support."
    I have tried the numbers and they are re-directing me again to the website for support.
    Pls assist.
    ~Akash

    Generally this is a sign that the iPhone had previously been
    hacked/modified/jailbroken and the update relocked it to the
    original wireless carrier. If this is the case, only that wireless
    carrier can unlock your iPhone. You must contact them to see
    if they offer unlocking and if you qualify.
    Where did you acquire this iPhone?
    What wireless carrier did you use before this problem?
    Does the app Cydia appear on your iPhone?
    What does it say when you look at Settings=>General=>About=>Carrier?

  • HT4972 I want to upgrade iOS, from 4.3.3. Will I lose all my apps?

    In order to upgrade the version I understand that I need to sync my iPad then update via iTunes. Will I lose all my apps or are these saved? What about apps I've bought?
    Thanks!

    If you have never synced the iPad to the computer that are intending to do the update by then this page may be of use : https://discussions.apple.com/docs/DOC-3141
    In terms of the actual update, connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases (File > Devices > Transfer Purchases on iTunes 11) - that should copy all of your apps (purchases or free) and other iTunes purchases over (music, films etc). You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
    Then start the update by selecting the iPad on the left-hand side of iTunes (on iTunes 11 you can enable the left-hand sidebar via option-command-S on a Mac, control-S on a PC), and on the Summary tab on the right-hand side clicking the Check For Updates button
    Updating to iOS 5+ : http://support.apple.com/kb/HT4972
    An iPad 1 will update to iOS 5.1.1, and an iPad 2 and 3 to iOS 6.0.1 - they are the only versions that are 'signed' by Apple for them.

  • I have a 3gs and just updated my ios from 4.1 to 6.1.  But I can't activate it after the upgrade. heeeeelp!

    I have a 3gs and just updated my ios from 4.1 to 6.1. But I can't activate it after the upgrade. what to do?

    joycesalvador wrote:
    ... But I can't activate it after the upgrade. what to do?
    See this discussion.
    https://discussions.apple.com/message/21189708

  • I have upgrade ios 6 to ios7 on my iphone 5.  I do NOT like it.  I want to come back to the previosu version.  why is it so complicated.  Why can I not find the instruction strait from apple? This is the worst possible upgrade ever.

    I have upgrade ios 6 to ios7 on my iphone 5.  I do NOT like it at all.   I want to come back to the previous version.  why is it so complicated? Why can I not find the instruction strait from apple? This is the worst possible upgrade ever.  It make me think of when ericsson got sold to Sony....drastic PC change.
    I would like to have simple instruction on how to downgrade.
    It feel like a change that I did not ask for , ok I push the upgrade buttom, but really this is the worst update aver!
    HELP!

    iPhone User Guide (For iOS 7 Software)Sep 20, 2013 - 23 MB

  • After upgrading my iphone ios from 5.1.1 to 6.0 i cannot click on wi-fi on/off (it is not highlighted)

    after upgrading my iphone ios from 5.1.1 to 6.0 wverythings seems to work fine.
    until today i was using my wi-fi network to download an application and suddenly wi-fi tirned off and when i went to the settings i cannot click on (on/off) wi-fi)
    it is ot highlighted.
    i searched the web for answers but all answers took me to a dead end.
    now i am stuck with iphone 4s with no wi-fi which is worth nothing.
    a normal nokia with wi-fi is much better.
    any help on how to fic my issue?

    Take a look at this Apple doc -> iOS: Wi-Fi or Bluetooth settings grayed out or dim
    If those 5 steps don't fix it, the iPhone will need service.

  • Hi, Im from Philippines,.... i am currently using my iPhone 4 (iOs.6.3)it  started when i upgrade it from iOs4 to iOs 6.3 , My iPhone doesnt identify numbers even if its in my contact if its not starting with  +63 ..what will i do?

    Hi, Im from Philippines,.... i am currently using my iPhone 4 (iOs.6.3)it  started when i upgrade it from iOs4 to iOs 6.3 , My iPhone doesnt identify numbers even if its in my contact if its not starting with  +63 ..what will i do?
    I change everything into +63 and i thought everything is already fine,.. and then now , i dont know what happened why it doesnt recognize numbers with +63 anymore

    Hello hsielglad,
    Thank you for your question. iTunes 11.1 is required to update to and sync with iOS 7.  If you are still running iTunes 10.6.3, I recommend trying to obtain the update by going to the iTunes menu and selecting Check for Updates.
    iTunes: How to install the latest version
    http://support.apple.com/kb/HT5654
    If you continue to get the message that iTunes is up to date, you can download the latest version of iTunes here:
    Download iTunes
    http://www.apple.com/itunes/download/
    Once the file downloads, double click on the installation file that downloaded to initiate the installation.
    Best,
    Sheila M.

  • Cant upgrade my iOS from 5.1.1 to 6.

    im using iPhone 4s (Factory Unlock) but i Cant upgrade my iOS from 5.1.1 to 6. after 90% of download an error cameup and stop downloading. Tried several time to download, whats the problem ? what should i do ?

    This message indicates that your phone was hacked or jailbroken to unlock it.
    Then when you updated/restored your phone it locked back up to the original carrier.
    Only the carrier that the phone is locked to can unlock it.

  • HT4972 how do I upgrade my Iphone ios from 3.1.2 to 6.1.3?

    how do I upgrade my Iphone ios from 3.1.2 to 6.1.3?

    Jus tconnect your iPhone to your computer and update it in iTunes.
    Update your device using iTunes
    Ensure that you're using the latest version of iTunes.
    Connect your device to your computer using the included USB cable.
    After iTunes opens, select your device when it appears in iTunes under Devices.
    Click "Check for Update" in the Summary pane to check for available updates.
    If an update is available, iTunes prompts you to download and install the update. Do not disconnect your device until the update has finished.
    From iOS: How to update your iPhone, iPad, or iPod touch

  • HT5654 please I need help, I have not been able to upgrade my iOS from 6.1.2 to 6.1.3?

    please I need help, I have not been able to upgrade my iOS from 6.1.2 to 6.1.3?

    Hello mpacology
    The article below will provide assistance with upgrade your iPhone operating system. You can do this through iTunes or through the Software Update section in Settings >General > Software Update
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

Maybe you are looking for

  • Canon D1X Raw Files and IPhoto 6.0.6

    I'm unable to load Raw files into IPhoto 6.0.6 from my Canon G1X on a Macbook Pro using OS 10.7.4. I've resisted upgrading to a later version of IPhoto because of the negative comments about the later versions, and indeed never would as my existing v

  • How do i get my iphone5 to sync with my cars handsfree bluetooth?

    how do i get my iphone5 to sync with my cars handsfree bluetooth?

  • Materialized Views

    I have a table ABC with 80 million rows in X Database. I created materialized view on Y database MVIEW3 as a Master table X.ABC using database private link . It took almost 90min. When I was trying to refresh using this command execute DBMS_SNAPSHOT.

  • GUI Programming with ABAP - Chapter 9

    I am working my way through the ABAP Objects  (Keller/Krueger) book, doing all the exercises, re-entering all the programs for learning purposes.  I get to Chapter 9, and the package I am working with has moved form Z_ABAP_BOOK to SABAPDEMOS.  There

  • HOW TO ADD DRAWING TO MATERIAL IN MM2 BD2 VIEW

    Hi can any one gives me the details steps requied to attach cad drawing to material in mm01 bd 2 view tks