Upgrading iTunes and Mac OS X compatability

I have just bought new iPod Touch that requires Mac OS X 10.5 or higher and iTunes 10. I currently have Mac OS X 10.4.11 and iTunes 9. I try to upgrade with software updates but no options pop up to do this. How do I upgrade?

You need to purchase Mac OS X 10.5 or if your computer can handle it, Mac OS X 10.6
That is the only way for you to upgrade your Mac OS X...
You would need to call the Apple Store to buy 10.5 as it is no longer listed in the Apple Store.
Here is 10.6 if your computer(s) can run this version.
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA&mco=MTc1ODgwMjE

Similar Messages

Upgrading itunes and disappearing drives

i could use some help,here is my problem :
after upgrading to any itunes version above 5.0 everything works exept windows and all of my burning programs(roxio--alchool120)do not recognise any burning drive.i have a cdrw internal burner and an external burner.none gets recognised.
when itunes first runs i tells me my config folder for the burning drives is empty please reinstall the drives.
should the external drive get installed again when i plug it in?why the new versions of itunes does this ?
so i use system restore to go back a day and everything works again,but the itunes version goes back too.
i hate ipods the only reason i do this is because of my son
ps:is there any way to get the ipod recognised by a old version of itunes?
dell dimension 8200 Windows XP sp1

ok this is the complete story (long version,will try to make it short)
holyday 2003 : install ipod itunes(ver 5?) everything works fine.
sometimes after don't know when my son updates to itunes (i believe 5.1?)and at the time after upgrading the i tunes worked but upon opening the itunes for the first time,
we had a message like this : itunes cannot find the registry settings to allow me to burn cds,please reinstall cds? .after that none of my burning programs had a default burnerand could not burn with any of it. so all freaked out i system restored to 2 days before. all my recording drives started working again and i told my son not to upgrade itunes anymore.
fast forword to few day ago: old ipod broke(hard drive gone) my son buys new ipod w/video from his friend. install ipod works with old itunes. complains because he cannot tansfer video to ipod with old itunes.swears the itunes is now to 6.0 and all bugs are now worked out.tries to upgrade itunes and bam.itunes don't work quicktime don't work all burning drives disappeared again.so much for all bugs worked out!after reverting to old itunes (i went crazy because itunes did not work ,had to clean out registry and install a stand alone version of quick time)now i have officially given up to upgrading itunes!
the old itunes now works with the new ipod but he has no way to tranfer video to it.
i tank you for your kindness in answering me but my only other question is:
is there any other program that let's you transfer videos(any file for that matter) to ipod?
and why can't mac people make the ipod appear and work like an external drive?
why can't we window users copy and paste a file directly into ipod?
sorry but i'm really ****** off
dell dimension 8200 Windows XP

I tried to upgrade itunes and i get windows error 7

i tried to upgrade itunes and i get windows error 7 - it says "The procedure entry point AVCFPlayerEnableHardwareAcceleratedVideoDecoderKey could not be located in the dynamic link library AVFoundationCF.dll

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

I clicked "yes" to upgrade iTunes and now it doesn't work. I get an error message stating my computer is missing MSVCR80 and then a message stating Error 7 (Windows Error 126). I've tried reloading iTunes twice. What can I do?

I clicked "yes" to upgrade iTunes and now it doesn't work. I get an error message stating my computer is missing MSVCR80 and then a message stating Error 7 (Windows Error 126). I've tried reloading iTunes twice. What can I do?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Upgraded iTunes and Quicktime now whole puter not working

I just upgraded iTunes and Quicktime for OSX 10.4, now after a restart i finder just keeps flashing, on and off and i cant open anything. Need help to fix or go bak to old versions?

thanks sarah, but the disk didnt work. i get to verifying my main drive and it comes back with:
First Aid Failed
Disk Utility stopped verifying "***" because the following error was encountered:
The underlying task reported failure on exit
and in the first aid window it says:
Volume Bit Map needs minor repair
Checking volume **** needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
I try to repair disk anyway but says the same thing on trying to do that?? any suggestions anyone?
Could i get the update for 10.4.8 and put on a disk to upgrade the OS from booting from the CD or from terminal mode? Does anyone think this could fix the prob?

How to get iTunes and Mac OS 10.5 to leave my file organization alone

I’ve organized my MP3 files for iTunes (using Mac OS 10.5.6) on a MacBook Pro. I did this manually since I have over 600 folders and thousands of song files. iTunes had created a mess. For example some albums were split up into different artists, composers or album names. Some files names began with a space or a dash, so they were our of alphabetical order. There were all kinds of nonsence with duplicated files etc. Once I got things all cleaned up and orderly I tried to make a backup of the master list by copying the files to a peripheral hard drive. The backup folders instantly reverted and even compounded the chaos that I had just fixed! If I delete all files from iTunes and reimport I end up with the same mess. How can I get iTunes and Mac OS 10.5 to leave my organization the way I want it and not revert to the old mess?

I don't understand.
If you uncheck *Copy files to iTunes music folder...* and *Keep iTunes music folder organized*, iTunes will not mess with the files unless you are RIPping them from CD using iTunes.
How do I change the tags so they are organized the way I want.
I don't know how you want them organized.
iTunes uses the tags and puts them into Artist/Album folders based on the ID3 tags.
If you are not using iTunes to organize stuff and simply naming things as you want, tags are irrelevant to how you put the files into folders and what you name the files.
When I copy the master list (with my organization) from one peripheral drive to another the files show up with the old names and folders.
Okay.

TS1474 I have already reset my ipod shut it off as well. I have upgraded Itunes and the ipod does not want to show up on Itunes anymore. It used to before but now it doesn't. How do I solve my problem?

I have already reset my ipod shut it off as well. I have upgraded Itunes and the ipod does not want to show up on Itunes anymore. It used to before but now it doesn't. How do I solve my problem?

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?

HT4061 Hi I tried to upgrade Itunes and it says if I proceed I will lose all media

I need help as I tried to upgrade Itunes and my phone has a picture on it of ITunes and a plug in. I can't open anything

Your phone is in recovery mode. All data on it are already gone. You need to connect your phone to your computer via USB and restore in iTunes.
If you've been smart and using your phone as recommended, all your data should have been recently backed up so data loss should be neglibible.

Itunes and Mac OS 10.4.11 - need Itunes 7.2, Itunes and Mac OS 10.4.11 - need Itunes 7.2

I purchased an old eMac, which has an OS X 10.4.11. I tried to set up itunes and connected my iPod, but it says it cannot accept anything higher than a version 7.2. I tried to find a 7.2 version, but every time it looked like I had it - it downloaded the most recent version. How can I get a 7.2? And, before you answer...please check the link you are getting ready to supply, because I have checked other answers and the links to those sites still work, but they do not have that version anymore. Thank you so much!

The current version of Quicktime is 7.6.4, which will be the only one available from Apple Software Update.
FCP 6.0.6 will work with it and the spec on the QuickTime page says you need at least Mac OS X 10.4.11 to run it. The last few QT updates have all been stable for me.
So at least in theory, you should be good.
If you are in the middle of a project, don't upgrade until you finish it. Otherwise, make sure that you have a current backup before you do.

Upgraded iTunes and all songs in music folder are duplicated

Recently upgraded to iTunes 10.1.1.4 and all songs are now duplicated. Any idea why this happened and is there an easy way to get rid of the duplicates? When I opened iTunes after the upgrade, it acted as though it was a new installation-asking questions about finding song files.

Something went wrong with the upgrade. itunes should not have asked about finding files on an upgrade.
For duplicates in the itunes program, sort by Date Added. Figure out which group is valid - either the oldest or newest, and delete whichever group that isn't needed. You can highlight the first and then hold the shift key to highlight the last, so you can delete the group all at once.
For duplicate on your hard drive, use Windows Explorer and Date Created/Modified the same way.

My iPhone said needed to upgrade iTunes and had no service.. Upgraded and still has no service

My iPhone will not work after being upgraded thru iTunes. Will not work at all

Have you tried a power off/on? Or a reset, hold sleep/power button and home button for at least ten seconds, ignoring the red slider?
Have you tried to reconnect to iTunes and do a restore?
Are you using iTunes 10.5.1?
If none of these work, it might be a good idea to visit an Apple Retail genius bar and have it checked out.

I recently upgraded Itunes and now my library has the music from all computers on my account if I delete the songs they are gone I just want to hear songs from my library not my kids music

I recently upgraded itunes. Now when listening to my library there is music from all authorized computers in my house. if I try to delete a song it is gone from everyones library in the house. I just want to listen to my music not my kids stuff. How do I get back to MY library Please help.

have you tried working through the suggestions from the following document?
iTunes and QuickTime for Windows: Songs and other audio don't play correctly

My Iphone 4 only charges when is switched off and it's not recognized by Itunes and Mac

Hello guys!! Please help me if someone knows what should I do. My iphone was working perfectly so far but a couple of days ago it stopped charging, its not charging neither with the a/c adapter and with the usb through my pc. It says device not recognized.. Today I had my iphone switched off and tried to see if it was charging and actually it was! But it didn't show that it was actually charging (the battery icon with the bolt didnt appear..but after 3 hours it was fully charged..but this happens only when its switched off..so i cant connect on itunes and i cant charge it while its turned on!! If someone knows please help!!!!!
I tried different cables and different computers and nothing. I can't restore because it's no recognized...
Thanks a lot!!

Hi, my iphone 4 was working fine a couple of days ago, but suddenly i plugged the device to my laptop and after a while i realized it wasnt charging, i have tested on a lot of computers but i got the same issue, even on a mac but its not detected.
So finally i turned off and after a while i realized the phone was fully charged, at least i found a temporary solution to this problem but its really anoying to switch off to charge the phoen, if you solve this problem please let us know, apple should fix this problem.
As you can see there is no charging logo when the phone is connected

I upgraded iTunes and now my songs sound horrible - help!

I was prompted a couple of times to upgrade the version of iTunes that I have on my computer - I upgraded at least twice (if not three times). Recently I tried listening to some of my music from my computer by selecting songs from my iTunes library and the songs sounded horrible - the songs sounded like I was listening to a scratched up CD, but I know that isn't the problem because the CDs are fine and the songs on my iPod (which were never updated after I updated the version of iTunes) are fine. What's the problem and what can I do to fix this? Thanks!

have you tried working through the suggestions from the following document?
iTunes and QuickTime for Windows: Songs and other audio don't play correctly

TS1967 I got a new Windows 8 laptop, upgraded Itunes and all my music is missing, including album names. Help!

Recently had to get a new laptop, everything was showing up correctly on the old one in the process of transferring music as far as playlists and albums. I recently went to sync my Classic and found it had most of my albums missing completely or the titles changed to "Unknown Album." My playlists are missing completely, and my "most played, etc" albums are blank. This is all on the new laptop, I haven't tried to plug in the ipod Classic or Iphone 4s to sync yet since the original transfer a month ago.
I'm not sure if this was due to the transfer between computers or new Itunes upgrade. Any info you can give would help. I'm running a windows 8 laptop.

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Upgrading iTunes and Mac OS X compatability

Similar Messages

Maybe you are looking for