Upgrading LabVIEW drivers from 5.1.1 to 10.0 (or compatible version)
Hello!
I can't read the files in the attachment (CCD drivers), because they are written in a LabVIEW version (5.1.1) not compatible with mine (10.0).
Do anyone know how to make them readable by my version?
Thank you very much,
Eleonora
Solved!
Go to Solution.
Attachments:
CCD_comm.llb 418 KB
Ccd_demo.llb 427 KB
CCD_sup.llb 1046 KB
Attached.
In the future, please post this type of request in the Upconvert Requests Thread. The link for it is shown in the Announcements section on the first page of the LabVIEW forum.
Attachments:
Giallina.zip 670 KB
Similar Messages
-
What is the impact of upgrading jdbc drivers from 9.2 version to 10g driver
Hi,
My application is built on Oracle 9.2 with 9.2 version jdbc drivers.
To use Java objects mapping with Oracle object TYPES (for ex. STRUCT),
I had to go for 10g jdbc drivers. Otherwise, I am getting an error:
java.sql.SQLException: Non supported character set: oracle-character-set-178
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:210)
at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:829)
at oracle.sql.CharacterSetUnknown.failCharsetUnknown(CharacterSetFactory
Thin.java:150)
at oracle.sql.CharacterSetUnknown.convert(CharacterSetFactoryThin.java:1
14)
at oracle.sql.CHAR.<init>(CHAR.java:109)
at oracle.sql.CHAR.<init>(CHAR.java:133)
at oracle.jdbc.oracore.OracleTypeCHAR.toDatum(OracleTypeCHAR.java:143)
at oracle.sql.StructDescriptor.toOracleArray(StructDescriptor.java:385)
at oracle.sql.StructDescriptor.toArray(StructDescriptor.java:560)
at oracle.sql.STRUCT.<init>(STRUCT.java:95)
at oracle.sql.OracleSQLOutput.getSTRUCT(OracleSQLOutput.java:95)
at oracle.sql.STRUCT.toSTRUCT(STRUCT.java:328)
at oracle.jdbc.driver.OraclePreparedStatement.setObject(OraclePreparedSt
atement.java:2025)
at oracle.jdbc.driver.OraclePreparedStatement.setObject(OraclePreparedSt
atement.java:2148)
I would like to hear from you that, what is the impact on the existing application if I upgrade
jdbc drivers from 9.2 version to 10g version?
Please do mention all the impact.
VyshuJDBC 10g works just fine against 9.2 database. See the interopeability matrix on the JDBC portal http://www.oracle.com/technology/tech/java/sqlj_jdbc/index.html
Kuassi - blog http://db360.blogspot.com/ -
how could iI upgrade my OS from Mac OS 10.5.8 to the Latest version Mountain Lion
Hello,
You need to get 10.6 & update to 10.6.8 first to be able to buy it from the App Store & download it.
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 4GB at least, more if you can afford it)
* 5GB of available disk space (I say 30GB at least)
* DVD drive for installation
* Some features require a compatible Internet service provider; fees may apply.
* Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It's been pulled from the online store, so you have to call Apple to buy it, last I heard, but quick, call before it's gone!
Call Apple 1-800-MY-APPLE
You have to get 10.6.8 first to go even higher to 10.7 or 10.8 -
Can anyone give me some advise on how i can quickly upgrade my imac from OS X 10.5.8 to the latest version OS?
Thanks,Check to be sure your Mac meets the specs for Mountain Lion
Backup your data
Purchase Snow Leopard DVD
Upgrade to Snow Leopard
Update to Snow Leopard 10.6.8
Using App Store on 10.6.8 purchase, download and install Mountain Lion
Allan -
Labview drivers for 5208 Two phase Lock in Analyzer
Hi!
I am trying to find the labview drivers in order to control the 5208 Two phase Lock in analyzer but without a lot of success. Does anyone work with the same device?
Is there any storage from NI with labview drivers from different providers and devisces?
Thank you for you time
Regards from France
VasileiosThe driver is available from NI on instrument driver net
via a search on eg&g and then go to analyzer
http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9656659CE034080020E748...
greetings from the Netherlands -
LabView donwconvert from 11.0 to 9.0
HI,
Can someone help me to downconvert Commtech FSCC LabView drivers from version 11.0 to 9.0 ?
Thank you
Attachments:
fscc-labview V1 driver support only(1).zip 773 KBSaved in 2009.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
fscc-labview 2009.zip 1061 KB -
How to use a GPIB card's LabView drivers to communicate with the card?
I have an axiomtek AX4810P PCI-GPIB card and i have aquired LabView drivers from the manufacturer.
This has put VI's for the GPIB functions on the 'user palette' but i can't work out how to use them to communicate with the card. can anyone help? please.LS,
Thank you for contacting National Instruments.
Unfortunately, since you are not using a National Instruments GPIB card, I do not have access to the drivers that were provided to you by your card's manufacturer. I would suggest contacting Axiomtek directly to obtain support using their drivers.
However, I did write a small VI that demonstrates how to use similar National Instruments drivers with a National Instruments GPIB card. Keep in mind, this example VI is not intended to work with your particular card. The drivers you obtained from Axiomtek may have similar functions, however, and you can use my VI as a guide. My VI allows you to send a command to an instrument at address 2 on the GPIB card.
Hope this helps!
Matthew C
Applications
Engineer
National Instruments
Attachments:
GPIB_Communication.vi 23 KB -
Hello,
I was wondering if it would be wise for me to upgrade my MacBook Pro nvidia drivers from version 301.42 to the current version 314.07? Reason, I am asking this is because my MacBook Pro has the nvidia GeForce GT 330m processor with 256mb of video memory and I haven't updated my Windows 7 64bit Home Premium display drivers for about 7 months. At the time I installed the 301.42 driver it was the latest WHQL release, and back then I did the upgrade after installing the Bootcamp 4.0 drivers (from the Bootcamp Assistant which had the 26X.XX driver version), Windows 7 SP1, and all Windows Updates. I used a clean install on those drivers. So far, I haven't had any problems with the 301.42 driver which makes me sometimes double think whether I should upgrade the drivers or not to the 314.07 version. As a result this is why I go to these forums and ask what could be the best course of action in my case?
Thanks in advance!Yes you should by all means update to the latest Nvidia drivers on the windows side of things. I presume you are using bootcamp (since thats really the only place this is relevant).
But yes! you should -
Hi Everybody,
I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan. How do I uninstall the Epson software and start all over again?
nickel_man_65Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd -
I upgraded my 3 yr old iMac to Snow Leopard (OS X 10.6) and now my HP C4150 Scanning function doesn't work (not recognized). I downloaded updated Drivers from the HP site and installed them, but still no joy. Any suggestions?
aspaceman,
Perhaps I owe you an apology. Having re-read that downloading from HP was unsuccessful I feel uncomfortable. Can I suggest you update your 10.6 system (as noted in your profile) to 10.6.8 (if it is not already there) by using the
Mac OS X 10.6.8 Update Combo v1.1 combo update plus any software updates that then apply. -
I am about to upgrade my Mac's OS from Mountain Lion to Mavericks. I recently networked to my Mac on our home wireless network an HP 8600 all in one printer/scanner and an HP LaserPro 127. I saw a note posted in a non-Apple forum stating that the Mavericks upgrade should include the drivers needed to run these products on Mavericks. Is that correct or will I need to download a new set of drivers from HP after I upgrade to Mavericks?
Any guidance would be appreciated.Hi mcubed33,
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link below for more information:
OS X: Printer and scanner software available for download
http://support.apple.com/kb/HT3669
Apple delivers third-party software for scanners and printers using Software Update. To set up your printer or scanner, just connect it to your Mac. If software is needed and available, OS X automatically downloads and installs it.
This article is a comprehensive list of currently supported printer and scanner models and associated software provided by third-party vendors as of 23 January 2014.
OS X Mavericks: Set up a printer
http://support.apple.com/kb/PH14143
Cheers,
- Judy -
the 2, the AN asked to right click the Invoke Node(this is step9) and choose initialize. However there is no intialize option on the pop up menu. Anything am I doing wrong? I am using Labview6 and I did add the "enableCustomInterface=True" in the INI-fileThank you for your help.
T Tallthe 2, the AN asked to right click the Invoke Node(this is step9) and choose initialize. However there is no intialize option on the pop up menu. Anything am I doing wrong? I am using Labview6 and I did add the "enableCustomInterface=True" in the INI-fileT Tall,
What's the number of the application note "Calling IVI-COM drivers from LabVIEW"? I'm unable to find what you're looking at.
Thanks,
--Bankim -
Error while installing Device Drivers from Disk1 for Labview 8.2
I am having trouble installing the Device Driver Reference CDs for LabView. I already installed LabView 8.2.1. When I try to install the device drivers from Disk1, I get the following error message :
.\UberInstaller.cpp(1458): IInstallerError 10009
Fatal Error. Unable to create temporary file.
Unable to copy original d\SupportFiles\resourceEng.dll to C:\DOCUME~1\x0039441\LOCALS~1\Temp\nii478.tmp.
Windows Error Windows Error 64: The specified network name is no longer available.
I can open the cd and see its contents, but I am unable to install it.
Can anyone help me in resolving this error.
thanks
Siddharth
Message Edited by Siddharth D on 08-05-2008 06:31 AMWell I am stuck with this problem
-
Error during upgrading LabVIEW to 6.02 from 6.00
When executing the 6.02 update patch, It halt at the point: Finding MSI database, and a dialog popup:
Title: NI MSI Patcher
Message: The local database for this product could not be found. Shall I attempt to reinstall the database? If yes, you will need your your original installation medium.
After install, It prompt me to reset, and the updater show the last popup for install again. It still don't work no matter i reset the computer or not. It always halt at this point. Could you help?
Thanks
Attachments:
6_02_ERR1.JPG 20 KB
6_02_ERR.JPG 33 KBHello km9394,
Thank you for your inquiry regarding upgrading LabVIEW. After looking at the screenshots provided I understand that you are not able to complete the installation process due a missing local database. The problem could have different resolutions depending on the operating system that you are using. One possible solution is to register your version of Windows assuming that you are using Windows 2000. In rare cases the solution has also been to install the latest Internet Explorer patch and then attempt to reinstall LabVIEW. That patch can be found at
http://www.microsoft.com/windows/ie/
Similar installation problems have been reported and are documented below.
�[Kai Barck 10/16/01] Same problem with another customer. He installed Teststand, then
LV 6.0, and updated it to 6.02. After that he got error 1500 when trying to install Database Connectivity Toolset or uninstall LV. Killing the msiexec client and removing the reg entry didn't help. Eventually he fixed the problem by registering Windows 2000 from the "Getting started for Windows 2000" window that appears at startup (if you haven't selected not to show it anymore). After registration the installer finished LV installation. This may have been the case also when Tom installed IE5SP2 if it required to register. [Creston Kuenzi - 10/25/01] Another problem with 6.0.2 and the Database Connectivity Toolset. I told the customer that others had success by registering the OS, but he said that wasn't an option. In the end, he had to reinstall the OS.�
I hope these resources help. Let me know if I can further assist you.
Shea C.
Applications Engineering -
LabView update from V7.0 to V7.1
Hi,
i want to upgrade my system from LV 7.0 to LV 7.1. Should i remove completly LV 7.0 before installing LV 7.1?
I've tried to install LV 7.1 without removing LV 7.0 and now have the problem that i couldn't start the MAX.
Could someone tell me what's the best way to upgrade it?
Can I also use the FieldPoint 4.0.1 with LV 7.1?
Thanks for your help.
regards
patrick
Patrick EtoumannLabVIEW 7 and 7.1 can peacefully coexist on a system (make sure to apply the two patches to 7.1 to make it 7.11f2). I'm not sure what happened to MAX, but you can either Repair the install from the Windows control panel, or update MAX to 4.1 by installing the latest DAQmx and other device drivers. Those can be found here. FieldPoint 4.0.1 should work with LabVIEW 7.11, but why? There's 5.0.1 out there, and it's freely available at that same link!
Editorial comment - Also, check your calendar because for all of 2006, we've had LabVIEW 8.0 and now 8.20. Actually, you are perhaps lucky to have skipped 8.0, but now that 8.20 is out it's time to go for it.
Dan Press
Certified LabVIEW Architect
PrimeTest Automation
Maybe you are looking for
-
Lost APN Setting on Iphone 4 After Upgrade to 4.3.1
I have an officailly unlocked iphone 4 that I bought from the UK. I was using it with STC in Saudi Arabai at 4.0 firmware, I have just recently upgraded to 4.3.1 and I can no longer see the APN setting to edit my MMS or internet settings under settin
-
Problem with exit Variable in may BEx Analyzer Workbook
Hello, I have created a workbook. In this workbook I use the 0CMONTH variable. I always want to get the previous month. For that I have the variable 0CMONTH-1 inserted in the query at default values in the query designer by 0calmonth. It will automat
-
Time Zone conversion of a date/timestamp in ABAP
Is there a function available in 4.5B that can convert a date/timestamp from one timezone to another?
-
I'm using Windows XP and Firefox 7.0.1. Private Browsing is grayed out. Help says go to Tools menu but there is none available. How do I enter Private Browsing ?
-
I use sax to parse an xml file. i subclassed org.xml.sax.helpers.DefaultHandler and overwrote the corresponding methods like characters(). the problem is, that this method is called twice for each element value if this element has no subelements. exa