Upgrading Language in CUE 8.6.1 on SME

I urgently need to install a language pack onto my CUE 8.6.1. Its the SM-SRE-710-K9 deployment.
I would prefer to keep my current version and simply add-on an additional Language (GB).
Is this possible ?? When I try it - I can only upgrade using with the main package file and it then says - no upgrades available/needed
If I upgrade to 8.6.4 will my licenses be ok ?? I would prefer to upgrade and not re-install.
Any help appreciated
James

Hi James
check this link
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel8_5/install/nuinstall.html#wp1121988
Also to download a language pack for 8.6 version following this link
http://www.cisco.com/cisco/software/release.html?mdfid=283671889&flowid=31833&softwareid=282774363&release=8.6.4&relind=AVAILABLE&rellifecycle=&reltype=latest
Regards
chrysostomos

Similar Messages

  • Windows 7 upgrade **Language and Shipping"

    I am a citizen of Canada, and i have bought a laptop in Taiwan this past week, i was wondering for the free windows 7 upgrade, which location i should chose upon signing up in the windows 7 offers page, and whether I can get it shipped to canada rather then here. Also as a follow up question, On startup of this notebook, I chose english as my OS language, does that mean my windows 7 copy will install in english or just the language of my region (which in this case is chinese).

    BTW if this info is nessesary, my model is DV3 2036TX

  • N80 (upgrade & language)

    Hello, just a little question ...
    I live in Finland and to have italian language on my phone i had pay 30 euro in a Nokia point. Now i see that there is a new software (I.E.) If i make myself the upgrade with Nsu, what do you think about the language? Will be finnish or italian ?
    Ciao

    If the product code is still the original one, NSU will install the original languages that the phone had when it left the factory where it was made.

  • Cisco 7937G reboot always after upgrade language pack

    Hello,
    I have an UC560 and I upgrade the Software Pack to 8.1 and change Language Pack to French.
    I connect Phones SPA5xx and it's fine.
    With cisco 7937G it reboot always.
    The last one with another UC540 I enter in conf t and enter this command line :
    tftp-server flash:/its/user_define_4_rp-sccp.jar
    Now it's not working.
    I activate the log tftp events and I have this :
    000125: May 18 15:09:41.890: TFTP: Looking for RingList.xml
    000126: May 18 15:09:41.890: TFTP: Opened flash:/ringtones/RingList.xml, fd 14, size 2823 for process 71
    000127: May 18 15:09:41.898: TFTP: Finished flash:/ringtones/RingList.xml, time 00:00:00 for process 71
    000128: May 18 15:09:41.918: TFTP: Looking for SEP0004F2F58427.cnf.xml
    000129: May 18 15:09:41.918: TFTP: Opened flash:/its/SEP0004F2F58427.cnf.xml, fd 14, size 1627 for process 71
    000130: May 18 15:09:41.926: TFTP: Finished flash:/its/SEP0004F2F58427.cnf.xml, time 00:00:00 for process 71
    000131: May 18 15:09:41.966: TFTP: Looking for User_Define_4/rp-sccp.jar
    000132: May 18 15:09:41.966: TFTP: Opened flash:/its/user_define_4_rp-sccp.jar, fd 14, size 70025 for process 71
    000133: May 18 15:09:42.146: TFTP: Finished flash:/its/user_define_4_rp-sccp.jar, time 00:00:00 for process 71
    000134: May 18 15:10:54.378: TFTP: Looking for RingList.xml
    000135: May 18 15:10:54.378: TFTP: Opened flash:/ringtones/RingList.xml, fd 14, size 2823 for process 71
    000136: May 18 15:10:54.390: TFTP: Finished flash:/ringtones/RingList.xml, time 00:00:00 for process 71
    000137: May 18 15:10:54.406: TFTP: Looking for SEP0004F2F58427.cnf.xml
    000138: May 18 15:10:54.410: TFTP: Opened flash:/its/SEP0004F2F58427.cnf.xml, fd 14, size 1627 for process 71
    000139: May 18 15:10:54.414: TFTP: Finished flash:/its/SEP0004F2F58427.cnf.xml, time 00:00:00 for process 71
    000140: May 18 15:10:54.454: TFTP: Looking for User_Define_4/rp-sccp.jar
    000141: May 18 15:10:54.458: TFTP: Opened flash:/its/user_define_4_rp-sccp.jar, fd 14, size 70025 for process 71
    000142: May 18 15:10:54.630: TFTP: Finished flash:/its/user_define_4_rp-sccp.jar, time 00:00:00 for process 71
    For me he found correctly the file user_define_4_rp-sccp.jar
    I try with dir flash:/its/user_define_4_rp-sccp.jar and he found the file :
    Directory of flash:/its/user_define_4_rp-sccp.jar
      263  -rw-       70025  May 18 2013 17:03:30 +02:00  user_define_4_rp-sccp.jar
    I physicaly poweroff the 7937G but nothing better.
    Thank you for your help.
    Stephane.

    Hello Alexander,
    It's better.
    I enter the no create cnf and create cnf, I wait 30 seconds / 1 minute and the 7937 start good.
    I have the menu I can make a call.
    I unplug 7937 and plug-it again and it reboot again again like before.
    The export of cnf file in its :
    Directory of flash:/its/*cnf*
    Directory of flash:/its/
      257  -rw-          98  May 19 2013 16:18:30 +02:00  SEPDEFAULT.cnf
      247  -rw-        4411  May 19 2013 16:18:30 +02:00  XMLDefault.cnf.xml
      254  -rw-        1627  May 19 2013 16:18:32 +02:00  SEP0004F2F58427.cnf.xml
      252  -rw-        1469  May 19 2013 16:18:32 +02:00  SEPA44C119F50EF.cnf.xml
      253  -rw-        1469  May 19 2013 16:18:32 +02:00  SEPA44C119F51FE.cnf.xml
      132  -rw-        1469  May 19 2013 16:18:32 +02:00  SEPA44C119F4F87.cnf.xml
      130  -rw-        1469  May 19 2013 16:18:34 +02:00  SEPA44C119F5104.cnf.xml
      131  -rw-        1469  May 19 2013 16:18:34 +02:00  SEPA44C119F50F0.cnf.xml
      129  -rw-        1469  May 19 2013 16:18:34 +02:00  SEPA44C119F5080.cnf.xml
      255  -rw-        1469  May 19 2013 16:18:36 +02:00  SEPA44C119F5152.cnf.xml
      128  -rw-        1469  May 19 2013 16:18:36 +02:00  SEPA44C119F5163.cnf.xml
      191  -rw-        1469  May 19 2013 16:18:36 +02:00  SEPA44C119F50D2.cnf.xml
      190  -rw-        1469  May 19 2013 16:18:38 +02:00  SEPA44C119F5157.cnf.xml
      188  -rw-        1469  May 19 2013 16:18:38 +02:00  SEPA44C119F515A.cnf.xml
      187  -rw-        1469  May 19 2013 16:18:38 +02:00  SEPA44C119F50E5.cnf.xml
      186  -rw-        1469  May 19 2013 16:18:40 +02:00  SEPA44C119F5076.cnf.xml
      185  -rw-        1469  May 19 2013 16:18:40 +02:00  SEPA44C119F5116.cnf.xml
      184  -rw-        1469  May 19 2013 16:18:40 +02:00  SEPA44C119F510B.cnf.xml
      183  -rw-        1469  May 19 2013 16:18:40 +02:00  SEPA44C119F51CA.cnf.xml
      182  -rw-        1469  May 19 2013 16:18:42 +02:00  SEPA44C119F51F6.cnf.xml
      181  -rw-        1469  May 19 2013 16:18:42 +02:00  SEPA44C119F51E1.cnf.xml
      180  -rw-        1469  May 19 2013 16:18:42 +02:00  SEPA44C119F51EE.cnf.xml
      179  -rw-        1469  May 19 2013 16:18:44 +02:00  SEPA44C119F4F5A.cnf.xml
      189  -rw-        1631  May 19 2013 16:18:44 +02:00  SEP58BFEA10ABDB.cnf.xml
    256507904 bytes total (151769088 bytes free)
    we're almost there.
    Thank you for your help,
    Stephane.

  • Lion upgrade, language question

    I'm currently living in italy and I want to install Lion OS X, my app store is all in italian. Will lion be in Italian? Or will it be in English like the version of Snow Leopard that is currently on my computer? I really don't want the unpleasant surprise of installing lion and finding my computer to be in Italian!

    OS X  always includes all the language localizations, including English,  listed in its tech specs no matter where you get it.

  • CUE Upgrade

    Hi,
    I am planning to upgrade the CUE from verison 2.2.2 to 2.3.4 because of the Script upload error and also there is no script editor avilable for version 2.2.2. I have gone through the upgrade procedure which requires below files:
                – cue-vm.2.3.4.pkg (main package files)
                – cue-vm-full.2.3.4.prt1 (voice-mail application)
                – cue-vm-lang-pack.2.3.4.pkg (language package file)
                – cue-vm-en_US-lang-pack.2.3.4.prt1 (language prompts)
                – cue-vm-upgrade.2.2.2_2.3.4.prt1
                – cue-vm-en_US-upg-lang-pack.2.2.2_2.3.4.prt1
    But all these files are related to VM application and will upgrade the VM application to version 2.3.4.
    I can't see any package related to AA on Cisco.com to upgrade it. How to upgrade the AA application to 2.3.4?
    Thanks
    Vaijanath

    Hello,
    Actually all of the files for the upgrade does reference to the vm not to the AA.
    This document has detail steps about the how to perform the upgrade of your CUE module.
    https://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel2_3/install/upg_boot.html
    HTH
    Please rate this post if was helpful
    Walter Solano
    CCVP, Cisco UCCX Specialist
    Cisco IP Communications Express Specialist

  • AIM-CUE Upgrade Error

    Hi Guys,
    I am having a problem while try to upgrade my aim-cue module version 3.2.4.0 to version 7.0.3.
    Thats my logs at down below. I couldn't any proper answer for that. This is for my lab.
    Help guys.
    mycue> $tall clean url ftp://192.168.1.100/cue-vm-k9.nm-aim.7.0.3.pkg
    WARNING:: This command will install the necessary software to
    WARNING:: complete a clean install.  It is recommended that a backup be done
    WARNING:: before installing software.
    Would you like to continue? [n]y
    Downloading ftp cue-vm-k9.nm-aim.7.0.3.pkg
    Bytes downloaded :  182241
    Validating package signature ... done
    Validating installed manifests ........
    Foundation verification failed
    Manifest signature validation failed for bootloader_sec_manifest.sig
    mycue>

    Hi,
    Did u verify the MD5 checksum after u downloaded the package ?
    it should be 83c78328efcf686968032333b1d922f3
    regds,
    aman

  • AIM-CUE unity express fails to update version 7.1.7 in Router 2821

    Hi,
    We are having a problems to upgrade to version 7.1.7.
    Initially the module only started with the bootloader mode, to fix this failure we decided to upgrade to the latest version.
    download the necessary files to perform the upgrade through boothelper:
    • cue-installer.nmx.7.1.7
    • cue-vm-k9.nmx.7.1.7.pkg
    • cue-vm-full-k9.nmx.7.1.7.prt1
    • cue-vm-installer-k9.nmx.7.1.7.prt1
    • cue-vm-langpack.nmx.7.1.7.prt1
    after the procedure was performed as indicated by the Cisco documentation. when I select the language version
    Language Selection Menu:
    # Selected SKU Language Name (version)
    1 PTB CUE Voicemail Brazilian Portuguese (7.1.1.0)
    2 RUS CUE Voicemail Russian (7.1.1.0)
    3 DEU CUE Voicemail German (7.1.1.0)
    4 NLD CUE Voicemail Dutch (7.1.1.0)
    5 FRC CUE Voicemail Canadian French (7.1.1.0)
    6 KOR CUE Voicemail Korean (7.1.1.0)
    7 CHS CUE Voicemail Mandarin Chinese (7.1.1.0)
    8 ESO CUE Voicemail Latin American Spanish (7.1.1.0)
    9 ITA CUE Voicemail Italian (7.1.1.0)
    10 ESM CUE Voicemail Mexican Spanish (7.1.1.0)
    11 ESP CUE Voicemail European Spanish (7.1.1.0)
    12 TUR CUE Voicemail Turkish (7.1.1.0)
    13 ENG CUE Voicemail UK English (7.1.1.0)
    14 ARA CUE Voicemail Arabic (7.1.1.0)
    15 SVE CUE Voicemail Swedish (7.1.1.0)
    16 FRA CUE Voicemail European French (7.1.1.0)
    17 DAN CUE Voicemail Danish (7.1.1.0)
    18 JPN CUE Voicemail Japanese (7.1.1.0)
    Available commands are:
    # - enter the number for the language to select one
    r # - remove the language for given #
    i # - more information about the language for given #
    x - Done with language selection
    gives the following error:
    Language Installation Menu:
    #  Selected   SKU     Language Name (version)
    1            ITA     CUE Voicemail Italian (7.1.7)
    2            ESP     CUE Voicemail European Spanish (7.1.7)
    3            ENU     CUE Voicemail US English (7.1.7)
    4            FRA     CUE Voicemail European French (7.1.7)
    5            ESO     CUE Voicemail Latin American Spanish (7.1.7)
    6            ESM     CUE Voicemail Mexican Spanish (7.1.7)
    7            ARA     CUE Voicemail Arabic (7.1.7)
    8            NLD     CUE Voicemail Dutch (7.1.7)
    9            SVE     CUE Voicemail Swedish (7.1.7)
    10            NOR     CUE Voicemail Norwegian (7.1.7)
    11            FRC     CUE Voicemail Canadian French (7.1.7)
    12            PTG     CUE Voicemail Portuguese (7.1.7)
    13            TUR     CUE Voicemail Turkish (7.1.7)
    14            HUN     CUE Voicemail Hungarian (7.1.7)
    15      *     ENG     CUE Voicemail UK English (7.1.7)
    16            DEU     CUE Voicemail German (7.1.7)
    17            DAN     CUE Voicemail Danish (7.1.7)
    18            PTB     CUE Voicemail Brazilian Portuguese (7.1.7)
    19            KOR     CUE Voicemail Korean (7.1.7)
    20            CHS     CUE Voicemail Mandarin Chinese (7.1.7)
    21            JPN     CUE Voicemail Japanese (7.1.7)
    22            RUS     CUE Voicemail Russian (7.1.7)
    Available commands are:
    # - enter the number for the language to select one
    r # - remove the language for given #
    i # - more information about the language for given #
    x - Done with language selection
    Enter Command:x
    ui_install scripts executed successfully.
    Starting payload download
    File transfer error during download.
    Curl error code 19 : Payload file is missing
    Error encountered while downloading payload(s)
    Unable to install. Please try again
    Please select from the following
    1     Install software
    2     Reload module
    3     Disk cleanup
    4     Install License(s)
    (Type '?' at any time for help)
    Any ideas what could be causing this sort of behaviour?, be hardware problems?
    Thanks
    Mr.X

    hi, still have not solved the problem and nobody has answered the question in this forum

  • Error ungrading NM-CUE

    I am trying to upgrade an NM-CUE module from 2.1 to really anything else, I started by trying to upgrade to 8.5, 7.1 and finally 3.2. The compatibility matrix states it should work with all three. Every time I attempt to upgrade it I get the following error:
    ERROR: Invalid package. Please verify if this is a valid package file.
    I have downloaded the files various times to make sure its a check sum error, but no luck. Any help would be appreciated.

    Hi Moises,
    Have you installed the language pack first before attemping the upgrade as follows:
    1. config t
    2. software download server url ftp://server-ip-address[/dir] [username username password password]
    3. exit
    4. software install add cue-vm-lang-langpack.plat.ver.pkg (language package file)
    HTH,
    Chris
    Please rate helpful posts

  • CUCM 7.1.5 + cue 8.6.7 AA call transfer issue

    The problem I have, happens only when a caller from PSTN calls my AA, the call is answered (the PSTN Caller hears a message) and then transfer to an sccp phone but the destination number does not answer and then the call is redirected to the forwarding destination. The last DN that will answer the call does not receive called id information but only the caller id (PSTN number).
    For example a PSTN user xxxx2232 calls one of our customer service representatives at xxxxx007. The call is answered by CUE AA that plays a message and then the call is transferred back to xx007. In my case xx007 does not answer and the call is forwarded to xx008 which sees on the phone display call from xxxx2232 only and not call xxxx2232 for xxxxx007. When xx008 tries to pick up the call from xx007 the same happens.
    With cue 7.0.3 i had no such issue after the upgrade of my cue to 8.6.7, I have this issue.
    Can help in order to find what is going wrong.
    Thanks.

    CUC yes, for CUPS you need to review the CUPS compatibility info to find that out, for any other Cisco apps, also review the release notes to find if they're compatible or no. For 3rd party apps, check with the vendor
    Sent from Cisco Technical Support iPad App

  • Middle East, Arabic, Hebrew language for Adobe Design Standard or Premium?

    Where can I find those? Are there trials for Adobe Design Premium or Standard, any version from CS3 onwards in Middle East, Arabic or Hebrew language?
    Either to buy or to download. If not from Adobe itself, what sites can be trusted?
    I see some upgrade language kits from languagesource dot com for example but not sure about those.
    Any suggestions?

    Dear  Jeff A eright I wish to use CS3 I am not Expert I am new in this field therefor I wanted to use CS3 trial Middle Eastern b/c I am working in Muslim country this time, If I could be able to use & understand CS3 I will buy it but I don't want to try each software alone, I want to download suite, if I would be satisfied with CS3 I will use it, if I couldn't then will buy CS2 Middle Eastern, also I had downloaded Photoshop CS3 English version it was asking for searial I wanted to use that 30 days trial but I couldn't get that as trial, you are Adobe employee & you can do some thing for me, I just want only legal Copy & you are able to provide its link & thats is not piracy you know it, about win-soft I don't like them, there is no any thing to download for me I also want to try InDesign & Photoshop CS2 Middle Eastern, but I can't download from there site, CS2 or CS3 would be better & enough for me, so kindly do something for me if you can.

  • Exchange 2010 SP2 Upgradation in DR site

    Hi All,
    I am planning upgrade exchange 2010 SP2 from SP1in DR servers which is in different site of AD.
    I have already run the prepare schema and prepare ad in schema master which is in production site and it got replicated in DR Domain controllers.
    But, still i am not able to upgrade the server. The error says,
    :\Exch SP2>Setup /m:upgrade /InstallWindowsComponents /Hosting
    Welcome to Microsoft Exchange Server 2010 Unattended Setup
    Preparing Exchange Setup
        Copying Setup Files                           COMPLETED
    The following server roles will be upgraded
    Languages
    Hub Transport Role
    Client Access Role
    Management Tools
    Performing Microsoft Exchange Server Prerequisite Check
        Configuring Prerequisites                                 COMPLETED
        Organization Checks                                      
    FAILED
         Setup needs to contact the Active Directory schema master but this computer
     is not in the same Active Directory site as the schema master (Default-First-Si
    te-Name).
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have been created but have not yet replicat
    ed to the local domain.  Wait for replication to complete and then run setup aga
    in.
        Language Pack Checks                                     
    COMPLETED
        Hub Transport Role Checks                                 FAILED
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have been created but have not yet replicat
    ed to the local domain.  Wait for replication to complete and then run setup aga
    in.
        Client Access Role Checks                                 FAILED
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have been created but have not yet replicat
    ed to the local domain.  Wait for replication to complete and then run setup aga
    in.
    The Exchange Server setup operation didn't complete. More details can be found
    in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
    Exchange Server setup encountered an error.
    Please let me know if you have options

    Hi All,
    I am planning upgrade exchange 2010 SP2 from SP1in DR servers which is in different site of AD.
    I have already run the prepare schema and prepare ad in schema master which is in production site and it got replicated in DR Domain controllers.
    But, still i am not able to upgrade the server. The error says,
    :\Exch SP2>Setup /m:upgrade /InstallWindowsComponents /Hosting
    Hi,
    If you run Get-OrganizationConfig | fl Name,objectversion in your DR-Site, what is the version number you see?
    If its not 14247, the schema has not been upgraded.
    /Hosting is not supported with SP2, so you need to leave that out.
    It might be better if you post in the forum
    Exchange 2010 for Hosters
    Some additional reading:
    Future of /Hosting Mode
    Martina Miskovic

  • Upgrade Exchange 2010 SP2 to SP3 getting fail

    Hi,
    I am trying to upgrade from exchange 2010 SP2 to SP3, but it getting failed.
    I have already run the prepare schema, prepare and domain prep in all domains and it got replicated in DR Domain controllers.
    But, still i am not able to upgrade the server. The error says,
    Preparing Exchange Setup
        Copying Setup Files                           COMPLETED
    The following server roles will be upgraded
    Languages
    Hub Transport Role
    Client Access Role
    Management Tools
    Performing Microsoft Exchange Server Prerequisite Check
        Configuring Prerequisites                                 COMPLETED
        Organization Checks                                      
    FAILED
         Setup needs to contact the Active Directory schema master but this computer
     is not in the same Active Directory site as the schema master (Default-First-Si
    te-Name).
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have been created but have not yet replicat
    ed to the local domain.  Wait for replication to complete and then run setup aga
    in.
        Language Pack Checks                                     
    COMPLETED
        Hub Transport Role Checks                                 FAILED
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have been created but have not yet replicat
    ed to the local domain.  Wait for replication to complete and then run setup aga
    in.
        Client Access Role Checks                                 FAILED
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have been created but have not yet replicat
    ed to the local domain.  Wait for replication to complete and then run setup aga
    in.
    The Exchange Server setup operation didn't complete. More details can be found
    in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
    Exchange Server setup encountered an error.
    Thanks,
    San

    Hi,
    Schema updates should be done on a schema master or on a DC in the same AD site as the schema master. Once extended, the updates will replicated via AD replication. To narrow down the issue, I recommend you check if there is any event related to replication
    on domain controller holding schema master role.
    Is the schema master role in the same site as the Exchange server which you want to upgrade? If not, you can try to transfer FSMO role to a domain controller which is in the site where you want to install Exchange 2010 SP3 and then upgrade to check the result.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • WRT54G Language and conecting problem.

    I have router Linksys WRT54G version 7. When I installing my router first time everything worked OK. When I installing my routers in my parents DSL link, it doesnt work. I gave this error message Step 9: Sender Error while upgrading the router's language pack I find in this forum, I tried 192.168.1.1/language.htm to upgrade language from routers CD in directory Pack/en_lang.bin. It gave me white window with black border without any text or buttons. When I try to read web based menu, I see only graphics and numbers without any text. I cant change anything. In step 10 : Router configuration error. Would you like to try again? and Unable to connect the Router. Check the cable connection from the computer to the router. Cables are OK, because internet on main PC works fine, wirelles I cant configure, I doesnt see menus. I tryed RESET button, my firmare is last official 7.00.4. Sorry for my english.

    Basically, your router's firmware has been corrupted. With the same reason, the configuration or setup page is corrupted as well. This means that you cannot do a firmware upgrade by using the router's setup page (The one that you usually access through 192.168.1.1).
    To solve this problem, you may need to download a certain application that will help you in upgrading the router's firmware instead of using the router's setup page since in the first place, it is corrupted.
    You need to download TFTP.exe (The application that upgrades the firmware of the router rather than using the setup page) and finally the Firmware file that is downloadable from the Linksys website.
    Dreamers*

  • CPS vs Version Cue?

    Ok, we currently have Adobe workgroup 1.01 server in house,
    we were going to upgrade to Version Cue CS3, and transfer the
    sites. Meantime, we also added Dreamweaver and Contribute to the
    mox, and were told we had to load Contribute Publishing Server?
    What is the difference between these 2, or do we run them both? and
    why?

    George-
    I'm on the accounts team here at Redwood (we developed CPS), and I'm more than happy to help answer any questions you may have.
    Send me a note at daniel.flowe(at)redwood.com, and I'll get back to you asap.
    Thanks, Daniel

Maybe you are looking for

  • Why archive AVCHD as disk images, versus .MOV or .MP4?

    I get an interesting array of responses to this everywhere I ask...but most of all I'm curious about the opinions of folks who specifically use FCPX for editing, so I'd greatly value your feedback. Like many folks who have been shooting AVCHD for a w

  • Why NL instead of HJ(query takes long)

    Hi there! There are a db(10.2.0.5 RAC), SLES 10 and two schemes.In the first schema query takes very fast: SQL> explain plan for              select  count(distinct c.unit)            from quantity_comp_v qc, comps c, noticequant nq, notices_table n,

  • Unable to connect to Internet

    I need help. I am trying to make a connection to the internet with my G4 running on OS 9.2 from my home. The phone company has come and told me that there is a fiber optic line that runs to the house and then an ethernet cable from the house to the j

  • Advice buying new mac pro

    Im in process in buying mac laptop-mac pro 15 or 17 inch-new for business I have never owned apple software/hardware. CUrrently have sony vaio laptop and also pc desktop with adsl broadband. wondering about few queries. 1. will mac pro work in my exi

  • Hi i have lost my iphone 4 can i manually enter the imei

    Hi, Is there anyway i can enter my lost iphone4 device serial number as well as imei number onto i clould or anywhere.. Cause on my eidt devise it shows lock.