Upgrading MacBook Pro hard drive

Is this a sound way of upgrading the hard drive in my MacBook Pro, late 2008, notebook?
1.     Install new drive into FireWire case
2.     Boot from Snow Leopard disks, NOT original install disks.
3.     Go to Disk Utility
4.     Click Restore
5.     Create "clone" of Macintosh HD to Macintosh HD on External Drive
6.     Boot from External drive to check that it works
7.     Turn everything off, swap out drives, and power on
Could it be that simple?
Anyone know if the following Hitachi drive has a sudden motion sensor that would require me to disable the one on my notebook?
HTS725050A9A364

Yes and No. Before you make the clone repair the hard drive and permissions. Then clone the drive. Before you restore the clone you must prep the new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
If you are preparing an external or a non-startup drive, then open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Similar Messages

Upgrading MacBook Pro Hard Drive - cannot get Bootcamp partition to work

Hello,
The other day, I decided to replace my 320 GB hard drive with a 1 TB hard drive/SSD hybrid. I did a little bit of research about cloning the drive before that, and it seemed pretty straight forward to clone the OS X partition, but I wasn't really sure about cloning my Windows partition. Originally, my 320 GB hard drive had 2 partitions: 220 GB for OS X Mavericks, and 100 GB for Windows 8.1.
I bought the new drive with an external enclosure and plugged it in. The first thing I did was open Disk Utility and partitioned the new hard drive (750 GB HFS+, 250 GB NTFS). I figured I would need to partition it first and clone each partition separately. I used Carbon Copy Cloner to clone the OS X partition, and it worked with no problem (I immediately could restart my computer and boot with the partition on the new drive, while it was still plugged in by USB).
Next, I tried using CCC to clone the Windows partition the same way (I realize now that CCC cannot do this). 7 hours later, the cloning was complete, but there was an error that a couple files couldn't be copied. I tried copying them manually but it didn't work. I wasn't sure if the Windows partition would work, so to find out, I switched the hard drives and put the old 320 GB one in the external enclosure. I booted my computer and it booted the new OS X partition with no problem. It also mounted the Windows partition that I cloned with CCC, and I can access all of the files in it. However, when I restarted and held down "option", it would not let me boot the Windows partition.
After some googling, I realized CCC is not able to clone a bootcamp partition and make it bootable, so I opened disk utility and deleted the Windows partition (using the minus button), then recreated it (using the plus button). I downloaded Winclone (paid $30), which supposedly can clone a bootcamp partition. I opened Winclone and it seemed pretty simple: you just choose the source partition on the left, and the target on the right. I plugged in the USB enclosure with my old hard drive, and in the Winclone menu the original Windows partition popped up. I chose that as my source, and chose to copy it to the new NTFS partition on the new drive that I created. I left it on overnight, and when I woke up it said it was completed.
I now had two drives mounted: my NTFS partition that I created, and a new one that said "EFI". I have no idea what EFI is. My NTFS partition looks like it has all of the files from my original Windows partition on it; however, when I restart it does not allow me to boot with it, although I now have the option to boot EFI. When I select EFI, I am given the Windows 8.1 start up screen (with the blue Windows logo), but then an error message pops up saying something like there is an issue and it needs to restart (it restarted before I could read the whole thing).
When I boot in OS X, I only have the NTFS partition (with all my Windows files) mounted, and no EFI. When I restart, I can still boot EFI, but I always get the same message and then it restarts.
Is there any way I can fix my Windows partition so that it works the same way it did on my old drive? What is EFI? Can I delete it? How can I make the NTFS partition, which seems to have all of my files, bootable? I only want 2 partitions: one for OS X, and one for Windows. Also, can I do all of this without having to reinstall either of the operating systems?
Thanks

Hmm, that's a good question!
I headed over to the twocanoes website (the folks that make Winclone) and their guide mentions something about running Sysprep before you create the Windows image. If you skipped that step, that may be why you're having issues
http://www.twocanoes.com/support/winclone/migrating-a-bootcamp-partition-with-wi nclone/
Step 24 in that guide also mentions copying a Boot file - were you able to/did you do that?
You may have better luck over in the Bootcamp forum, which is here.
~Lyssa

Upgrading MacBook Pro Hard Drive - cannot get Windows partition to work

Hello,
The other day, I decided to replace my 320 GB hard drive with a 1 TB hard drive/SSD hybrid. I did a little bit of research about cloning the drive before that, and it seemed pretty straight forward to clone the OS X partition, but I wasn't really sure about cloning my Windows partition. Originally, my 320 GB hard drive had 2 partitions: 220 GB for OS X Mavericks, and 100 GB for Windows 8.1.
I bought the new drive with an external enclosure and plugged it in. The first thing I did was open Disk Utility and partitioned the new hard drive (750 GB HFS+, 250 GB NTFS). I figured I would need to partition it first and clone each partition separately. I used Carbon Copy Cloner to clone the OS X partition, and it worked with no problem (I immediately could restart my computer and boot with the partition on the new drive, while it was still plugged in by USB).
Next, I tried using CCC to clone the Windows partition the same way (I realize now that CCC cannot do this). 7 hours later, the cloning was complete, but there was an error that a couple files couldn't be copied. I tried copying them manually but it didn't work. I wasn't sure if the Windows partition would work, so to find out, I switched the hard drives and put the old 320 GB one in the external enclosure. I booted my computer and it booted the new OS X partition with no problem. It also mounted the Windows partition that I cloned with CCC, and I can access all of the files in it. However, when I restarted and held down "option", it would not let me boot the Windows partition.
After some googling, I realized CCC is not able to clone a bootcamp partition and make it bootable, so I opened disk utility and deleted the Windows partition (using the minus button), then recreated it (using the plus button). I downloaded Winclone (paid $30), which supposedly can clone a bootcamp partition. I opened Winclone and it seemed pretty simple: you just choose the source partition on the left, and the target on the right. I plugged in the USB enclosure with my old hard drive, and in the Winclone menu the original Windows partition popped up. I chose that as my source, and chose to copy it to the new NTFS partition on the new drive that I created. I left it on overnight, and when I woke up it said it was completed.
I now had two drives mounted: my NTFS partition that I created, and a new one that said "EFI". I have no idea what EFI is. My NTFS partition looks like it has all of the files from my original Windows partition on it; however, when I restart it does not allow me to boot with it, although I now have the option to boot EFI. When I select EFI, I am given the Windows 8.1 start up screen (with the blue Windows logo), but then an error message pops up saying something like there is an issue and it needs to restart (it restarted before I could read the whole thing).
When I boot in OS X, I only have the NTFS partition (with all my Windows files) mounted, and no EFI. When I restart, I can still boot EFI, but I always get the same message and then it restarts.
Is there any way I can fix my Windows partition so that it works the same way it did on my old drive? What is EFI? Should I delete it? How can I make the NTFS partition, which seems to have all of my files, bootable? I only want 2 partitions: one for OS X, and one for Windows. Also, can I do all of this without having to reinstall either of the operating systems?
Thanks

Hmm, that's a good question!
I headed over to the twocanoes website (the folks that make Winclone) and their guide mentions something about running Sysprep before you create the Windows image. If you skipped that step, that may be why you're having issues
http://www.twocanoes.com/support/winclone/migrating-a-bootcamp-partition-with-wi nclone/
Step 24 in that guide also mentions copying a Boot file - were you able to/did you do that?
You may have better luck over in the Bootcamp forum, which is here.
~Lyssa

2011 Macbook Pro Hard Drive Upgrade?

Hi. I am looking at upgrading my 2011 Macbook Pro hard drive. I want to get a 7200 RPM hard drive. I have been looking on Newegg and doing some research, and from what I can tell, the 2011 Macbook Pro uses a 3.0GB/s interface. If I were to buy a hard drive that has a different interface, like a 6.0GB/s interface, would it be compatible? Does anyone know the sizing for an MBP hard drive?
Also, it doesn't matter who the manufactorer is right?
And finally, does anyone have any recommendations?

But in my Honest opinion I don't think you'll really notice the difference between the 5400 and 7200 rpm unless your rendering large video files or transfering large amounts of data to an external or USB drive. But again you'll be limited on the speed of the external connections that your transferring too... If you really want to notice a difference, get the SSD with a Sata 3 or 6.0GBs connection speed. But the difference between a 5400 and 7200 rpm drive for normal tasks is almost negligable, you probably won't even notice the difference, but if you get the SSD you'll definately notice a difference in boot time, transfer speed, video rendering speed, copying speed of large files, etc...

My macbook pro hard drive died. I only have a windows hard drive and an old powerbook G4 which of course you can't use to create a boot disk for my macbook. How can I solve this?

I can't get app store on my old power book to download OS X, My macbook pro hard drive died and all I have is a windows hard drive, still has windows os on it, a 500 Gb USB drive and this power book. How can I get my macbook back up without spending money? Thanks

And what happens if the OPs Mac is of a newer version that came with a version of Snow Leopard above the 10.6.3 version that is on that Retail, meant for Upgrade, disc? Like if it came with 10.6.4/.5/.6/.7? That disc you linked to would not work.
He needs to contact Apple and get a replacement set of Original System Reinstall Discs. That is the only way he can be assured it will work and he would also get the iLife apps which he wouldn't buying that DVD disc you linked to.
dwb wrote:
The Snow Leopard DVD is $20 from Apple. You'll just have to wait a few days. BTW this is a full installer that works with any model computer that can run SL. Apple used to ship recovery/installation disks that were tied to specific computer models so that a 15" MBP installer disk coudn't be used on a 13" MBP computer. So you need either full installer or the recovery disks for your specific model.
And BTW, I have a 2009 13" MBP w/8GB RAM that is running Mavericks. With a 5400 RPM drive I used to experience a bit of beach balling (think hour glassing) but an SSD has given it new life. It feels now slower than the newest MBPs - it obviously benchmarks considerably slower but in everyday use it doesn't feel like a 4 1/2 year old computer at all.

Can I Replace my Early 2009 Mac Mini Hard Drive with my Early 2011 Macbook Pro Hard Drive?

I am replacing my 2011 Macbook Pro Hard Drive with a Solid State Drive. Instead of keeping the hard drive on an external enclosure I was wondering if I can use it to upgrade my Mac Mini's 160GB hard Drive with the one Im taking out of the MBP. And if so, is there any special formatting I would need to do?

It should work fine. No special formatting required. It actuality, I suspect that if you connect the HD, the Mini will boot into the OSX that was on the MacBook.
When you replace the HD in the Mini just be careful with the antennas and their wires and connections I accidentally disconnected the wifi antenna on mine when I replaced the HD.

I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extrem. How do I get Itunes to search for the music here with out trying to copy it to my laptops hard drive??

I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extreme (2 TB drive plugged into the USB port). I see the drive on my laptop and I can add and delete files no problem. How do I get Itunes to search for the music here with out trying to copy it to my laptop's hard drive? I don't have enough space to do that.

How did you move the music to the external drive? What exactly is on the drive? The entire iTunes folder or only music? If it is the entire iTunes folder you can do the option+start suggestion earlier. If you copied only music and did so by dragging it there then you need to delete it again and consolidate/organize it there instead so iTunes tracks the move. iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507

My MacBook Pro hard drive crashed a little while ago and has been replaced. Is it possible to take tunes from iPod Classic and transfer all of them back to iTunes on computer?

My MacBook Pro hard drive crashed a little while ago and has been replaced. Is it possible to take tunes from iPod Classic and transfer all of them back to iTunes on computer? Is this just for purchased tunes or can I do it for ones that have been burned from CD's as well? Thanks for any help!

[Zevoneer's detailed instructions on getting music off an iPod|http://discussions.apple.com/message.jspa?messageID=9053179]
[Wired's How To: Get Your Music Off of Your iPod|http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod]
[http://www.metaphoriclabs.com/articles/5-ways-to-copy-music-off-your-ipod-window s-mac-os-x/]
[Topic: Get music off iPhone|http://discussions.apple.com/message.jspa?messageID=11512841]
[Copying iTunes Store purchases from your iPod or iPhone to a computer|http://docs.info.apple.com/article.html?artnum=305465]

My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

You'll get better performance if you use a Firewire hard drive (especially if you buy a 7200 RPM drive). Firewire's IO speed is significantly faster than USB 2. USB 2 has a theoretical max speed of 480 Mbps except that it has extremely high over-head. The fastest speeds you can typically get are about 300 Mbps. Firewire, on the other hand, has very little overhead. The fastest speeds you can get are very nearly 800 Mbps. You will typically be constrained by the maximum read/write speed of the drive, not the speed of the I/O on the Firewire bus. Now if you had one of those nice shiny new Macs with the Thunderbolt I/O and a Thunderbolt drive (Light Peak) ... I think they alter space and time so that your data arrives before you know you want it.
Also... unless you want to buy a solid state drive (very expensive), try to keep your hard drives from becoming much more than about 60% full if you want great performance. A nearly "full" hard drive is, on average, only about half as fast as the same hard drive when nearly empty.
USB 2 will work perfectly fine... just not as fast.
Also... it's much safer to move the entire Aperture library than to "relocate masters". Your images must be managed. You can Aperture manage them, or you can manage them. But someone has to manage them. If you "relocate" them so that they are no longer stored inside the Aperture library then you'll need to work out a system of how you decide to organize things and it's critically important that you don't start moving files around or deleting things without Aperture's knowledge. If you do, you'll break the links to your masters and start having problems with missing masters. If you have Aperture manage the library then you don't need to worry about any of that stuff.... it's safer.
Do make backups (use the Aperture Vault or use some other backup program, but make sure you back up your work if you care about it.) There are only two kinds of hard drives in the world: (1) those that have failed and (2) those that are going to fail. There are no exceptions to this rule. Hard drives are cheap. Backup software is built into Aperture and into your Mac.

New 15" Macbook Pro hard drive failure

It is common for a 15" Macbook Pro hard drive to crash after 3 months? How does Apple Support generally fix? Genuis bar seemed overwhelmed by holiday crowds and recommended an $8k 3rd party vendor.

"Any disk can fail at any time."
Over a large sample, the drives used are extremely reliable. You did not have a large sample, you had ONE drive.
Now you are much smarter than you were before this disaster. Apple will not pay for your data recovery. You (and everyone) need a backup solution.
Apple provides an excelent backup solution called Time Machine, that can do hourly backups to an external drive without disturbing your current work. Buy yourself an external drive at least twice as large as the built-in. Turn on Time machine, make sure it is working, plug it in at least daily, and then don't worry about it any more.

My macbook pro hard drive went bad and i bought a new one and installed it. Now i have the old corrupted hard drive in my hand and i am looking to recover my files from it, any suggestions please? too bad i never backed them up.

My macbook pro hard drive went bad and i bought a new one and installed it. Now i have the old corrupted hard drive in my hand and i am looking to recover my files from it, any suggestions please? too bad i never backed them up.

After you have installed the OSX on the new HDD in your MBP, install the old HDD in an enclosure and connect it to your MBP via USB. Then try to drag and drop your data to the new HDD.
If this proves unsuccessful, you may look for data recovery software on the Internet. There will be free trails to see if it will work or not. If the trial suggests that it will work, then you will have to purchase the software.
The last resort is a professional data recovery service that will offer NO guarantees and charge a lot of money.
As you now can appreciate, backups eliminate such predicaments.
Ciao.

My MacBook Pro Hard Drive recently gave me the gray folder with the question mark of death. Even as

My MacBook Pro Hard Drive recently gave me the gray folder with the question mark of death. Even as a Mac Newbie/Novice, I successfully installed a new hard drive and the OS (10.6.8) software from my installation discs. I have, however, lost the ability to play video using the spacebar and I have no idea on the steps necessary to correct this seemingly simple technical blip. .Here's my system overview:Model Name: MacBook Pro Model Identifier: MacBookPro6,2 Processor Name: Intel Core i5 Processor Speed: 2.4 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache (per core): 256 KB L3 Cache: 3 MB Memory: 4 GB Processor Interconnect Speed: 4.8 GT/s.
I am using the Premiere Pro CS5 NLE (with the 5.0.4 updates), and I have tried to reinstall the software (which is actually the Production Premium package) several times, but I still cannot use the spacebar (or any method) to play any of my imported videos.
PLEASE HELP in any way you can!
Prior to having to replace my hard drive, my software was working just fine. No problems at all. But now, it seems that I can't get it to play whatever type of file I import.
Again, I am a newbie to the Mac, so any and all correctional/repair assistance needs to be expalined as if I were a child : )
I would hate to try to revert to considering the sophmoric Final Cut Pro X editing software package, but I've got to do something to be able to get back to my editing activities.
zionhall
[email protected]

Jorge242 wrote:
@FatMac the internet recovery doesnt work. It goes into recovery mode and then when i try to reinstall it cant find a disk to install it to. So what would be a good choice to take now?
Recovery Mode presents you with, among other things, Disk Utility. When you open that, if the internal shows up at all, first try to "Repair DIsk." If that doesn't work but if the "Media" line is present, try to format and partition it with a GUID partition table (understand that you will be erasing the contents of your internal). Then try to reinstall the OS. If that doesn't work, and since your Retina MBP didn't come with a DVD drive or DVDs, you'll need to try a hardware test using these instructions from Apple (short version: shut down, press the power button and hold down the "D" key). If none of those things work, let's hope you either have AppleCare or your warranty has some life left because the SSD in your rMBP is proprietary and expensive. You'll need to bring it to an Apple Genius for evaluation.

My Macbook Pro hard drive got locked. How can I unlock it?

My Macbook Pro hard drive got locked. I have replaced the drive with a new drive. I put the old drive in an external case. How can I unlock the old drive to get my pictures off and put on the new drive. I can see the drive but I cannot get to the iPhoto files because it is locked. Is there an easy fix?

How did the drive get locked? That doesn't JUST happen for no reason. The only way to unlock it is to put it back in to the Mac it came out of and UN-LOCK it.

Early 2008 MacBook Pro hard drive was killed; how to sync stuff

My early 2008 MacBook Pro hard drive was reimaged (not by me) and they lost everything on there, and have now put in a new hard drive, saying nothing was salvageable on the original HD. I have an iPhone, iPod, iPad. When i get the MBP back, how will I be able to get those devices synced so that everything I've bought/have goes back onto the HD?
The original HD was being reimaged because my work requires use of Windows, and I was using Windows via Boot Camp. Windows got a terrible rogue virus (from my clicking on a link), which shut everything down on that side. Work tech folks said they needed to reimage the Windows part of the drive, but said in the process, the reimaging took everything, Mac stuff included. That's why I'm in this situation. They are going to put in a new hard drive, but it is a blank slate.
Long story short: last time I backed up was 2 years ago, and it wasn't using Time Machine, but an external hard drive. That was also before I got my current iPhone, the iPad and made some additions to iTunes. (For those who say shame on me, for not doing a backup sooner, you're right: But we have gone through 3 moves in 18 months, so it has been kinda nuts.)
I expect the MBP to get sent back to me in the next day. I have no idea how to put these pieces back together. I'm not even sure about data recovery, but am most concerned about iTunes/iPhone/iPod/iPad.
Thanks for your help!

suzannemacuser wrote:
Long story short: last time I backed up was 2 years ago, and it wasn't using Time Machine, but an external hard drive. That was also before I got my current iPhone, the iPad and made some additions to iTunes.
Two years ago??? Shame on you!!!
I found this the other day. It's old but still applies. This should be more than enough to help you get back on track. See the comments by Zevoneer
https://discussions.apple.com/message/7217190#7217190
You will have to check on each of these. Some of the links are outdated but there is more than enough to get you started. See this article about transferring purchases. The link is in the other thread as well.
http://support.apple.com/kb/HT1848?viewlocale=en_US
Backup! Backup! Backup!
Message was edited by: Demo

Transferring files from MacBook Pro hard drive to Time Capsule

I recently bought a Time Capsule. I know I can use that as an external hard drive to save disc space on my MacBook Pro. How can I transfer files that are already on my MacBook Pro hard drive to the time capsule? For instance, I have videos of my daughter saved on MacBook Pro that I can view on iTunes or transfer them to either my iPhone or iPod Touch. Is there a way to either move individual files or the entire folder to Time Capsule?
Thank you!

Open the folder and drag the contents over.

Upgrading MacBook Pro hard drive

Similar Messages

Maybe you are looking for