Upgrading macbook pro storage

I am probably going to buy a MacBook Pro with Retina. I'm probably only going to get the 256GB SSD, because $500 more to upgrade to 512GB seems too much. I know that I won't be able to upgrade the SSD myself later, but what I'm wondering is, if I do need more storage, can I can pay Apple later to upgrade the storage for me? I have heard about people doing this through the Apple factory but I don't know if it's true. Or would I be stuck with the 256GB indefinitely unless I went with a 3rd party seller?

You're stuck with the 256GB that your Retina came with....
In the future - it might be possible to upgrade the flash storage since it's attached via daughter card....
at this time however, it is non upgradeable.....
taking it to Apple for upgrading it to a larger one isn't possible at this time once you buy it...
good luck..

Similar Messages

  • After upgrading macbook pro from mountain lion to mavericks computer performance slowdown

    after upgrading macbook pro from mountain lion to mavericks computer performance slowdown

    Fixing a Mavericks Installation Problem
    How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
    Try these in order:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
         after the chime press and hold down the OPTION key until the boot manager screen appears.
         Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Upgrade MacBook Pro 2011 Mac OS X 10.6.8 to Mountain Lion

    Can I Upgrade MacBook Pro from Mac OS X 10.6.8 to Mountain Lion?

    Your Mac must be one of the following models:
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Xserve (Early 2009)
    If you are running Lion, you can find out if your current Mac qualifies by clicking the Apple icon at the top left of your screen, choosing About This Mac, then clicking More Info.

  • Macbook pro storage do not get smaller after cleaning up photos in new photos app

    Macbook pro storage do not get smaller after cleaning up photos in new photos app.
    How can I delete photos? are they hidden somwhere?

    Yes, trash is empty. And in photos libary I only have 1800 items. Also I havent got so much movies.

  • I upgraded MacBook Pro (13-inch, Early 2011) to yosemite. I have no more access to Finder, App Store and some apps. Since I have no access to App Store I cannot download the missing  parts. How can I get access to App Store?

    I upgraded MacBook Pro (13-inch, Early 2011) to yosemite. I have no more access to Finder, App Store and some apps. Since I have no access to App Store I cannot download the missing  parts. How can I get access to App Store?

    Welcome to Apple Support Communities
    What do you mean by having no access to those apps? Can you start up your Mac and work with it, and only some OS X apps do not work?
    Anyway, what you can try is to reinstall OS X. To do this, hold Command and R keys while your Mac is starting up and reinstall OS X. You will not lose any file.

  • What laptop HDD to the experts use? Looking to upgrade Macbook Pro 2007

    I changed my mind about getting a portable external HDD and decided to upgrade my internal HDD on my Macbook Pro I purchased back in 2007. The applecare is almost up so I might as well upgrade now while I have the cash.
    I would like to know what 2.5" internal hard drive professional video editors recommend (being an amateur editor myself).
    I was thinking the Seagate Momentus 7200 RPM 500GB drive but discovered that there are two kinds, one with a free-fall mechanism that some say conflicts with the macbook's own mechanism. Furthermore, I have heard that recent tests show the 7200 RPM 500GB Momentus isn't as fast as its price or specs would make you believe. Is this true?
    Have any of you found a satisfying internal hard drive for your video editing on the go needs?
    Let me know.
    Here are the specs on my current HDD:
    Hitachi HTS541616J9SA00:
    Capacity: 149.05 GB
    Model: Hitachi HTS541616J9SA00
    Revision: SB4AC7CP
    Serial Number: xxxxxxxxxxxxxx
    Native Command Queuing: Yes
    Queue Depth: 32
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Mac OS 9 Drivers: No
    Partition Map Type: GPT (GUID Partition Table)
    S.M.A.R.T. status: Verified
    Volumes:
    Mrkvantosh HD:
    Capacity: 148.73 GB
    Available: 4.84 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk0s2
    Mount Point: /

    The new FCP has a set of codecs just for offline edits its called prores proxy. This is for offline edits only. Professional editors know better than to try to edit on a laptop. This would be the equivalent of pulling a house uphill with a 1955 VW beetle. If you insist on this, both Caldigit and Sonnet make firewire 800 raids. But you will not be able to finish using Proress HQ or Prores 4444. So you need to decide what your audience is. If this is for weddings, that does not require any sort of quality but if your editing episodic TV or even commercials you really need to use a Mac Pro and a proper RAID. and finish with Prores HQ or 4444 and then output to a finishing codec such as MPE2 or what ever the station requires. If you use a homade drive which is what you are suggesting prepare yourself for a world of hurt. These are for storage ...not for editing at best you may be able to use half the drive and be prepared for losing everything on the drive from time to time until the drive fails completely. You must use at least a 7200 RPM drive with a large buffer and preferably a 10,000 RPM drive. again this is at best a short term solution which invites disaster and if you don't have your raw footage backed up someplace your just asking for a nightmare.

  • SSD Upgrade MacBook Pro Mid 2012 (Model: 9,2)

    Hey guys!
    Well as some of you might already have read, I will upgrade the RAM of my MacBook Pro, and since I decided to do this, I tought that why maybe not do the SSD as well. I want to know which is the best option for an High Quality SSD for my MacBook Pro Mid 2012 (Intel Core i5 2.5 MHz, 4GB RAM (upgrading to 16GB). I've read that Crucial, but I want an SSD with more than 512 GB which is the amount my Mac came with in the default HD.
    Thanks!
    Later.

    OWC offers a 960GB SSD with top reliability and storage capacity:
    http://eshop.macsales.com/shop/internal_storage/SSD/Mercury_Electra_3G_Solid_Sta te
    For a little less, Crucial has a reliable SSD available:
    http://www.amazon.com/Crucial-2-5-Inch-adapter-Internal-CT960M500SSD1/dp/B00BQ8R GL6/ref=sr_1_8?ie=UTF8&qid=1373169624&sr=8-8&keywords=crucial+SSD
    Personally, I chose Crucial.

  • Upgrading MacBook Pro 13" (mid-2010) HDD with Bootcamp Partition

    I'm upgrading my macbook pro's hdd from 250 gb to 1tb. My OS is lion 10.7.5 and i also have windows 7 installed on my bootcamp partition.
    The following are the details to the HDD i plan to buy.
    Samsung Spinpoint M8 1 TB Laptop Internal Hard Drive (ST1000LM024) -
    2.5 inch Form Factor
    SATA 3.0 Gbps Interface
    1 TB HDD
    5400 RPM Spin Speed
    I need your advice on if i m buying the correct hard disk. If not please advice me one.
    And please also tell me how i should upgrade my hard disk. I know how to physically install the drive but i ask of you to tell me how to clone my current hard disk with my bootcamp partition. Which software to use, precautions to take etc.
    MacBookPro 13" (Mid-2010)
    Processor  2.4 GHz Intel Core 2 Duo
    Memory  8 GB 1067 MHz DDR3
    Graphics  NVIDIA GeForce 320M 256 MB
    Software  Mac OS X Lion 10.7.5 (11G63) and Windows 7 Ultimate on bootcamp

    Those are the correct RAM modules for you model (the 13" being the only mid-2010 model that can use 16GB of RAM - but those modules will surely get you to 8GB!).
    Am I right in assuming that you want to purchase a SSD to be installed in your boot bay and that you want to install the Samsung drive in the optical bay? Unfortunately, your link points to a rather sparse description of the drive - I see the 2.5" but I don't see the depth (which should be 7-9.5mm and not a mm more).
    I'm just unclear about whether you're looking for a new spinning drive as well as a SSD and whether or not the drive will fit (just a minute - OK, found some more info - the Samsung drive is 9.5mm so it should sit just fine in your machine: do you still want a SSD?).
    Note that the 2TB Samsung probably won't speed things up much - it's a 5400rpm drive: if you could use a 1TB drive, you could get a faster, 7200rpm drive.
    Clinton
    MacBook Pro (15” Late 2011), OS X 10.??, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

  • Is it possible to upgrade MacBook Pro 15inch iris pro Retina display version to Nvidia graphics card?

    Hi
    I purchased a MacBook Pro 15inch iris pro Retina display version (£1599) recently.
    Can we upgrade  tit with Nvidia graphics card?
    Thanks

    In USA, you can return a Mac within 14 days of purchase and buy a new one with the desired spec.
    Retina MacBook Pro cannot be upgraded once bought.
    Best.

  • SSD Upgraded MacBook Pro 2011 freezes, hangs, until SSD is no longer recognized

    Hello.
    Enough with the small talk. I have MacBook Pro 13" Late 2011 with Lion that I upgraded with a 128GB Vertex 4 SSD about 8 months ago. I moved the original HDD into the optical bay and slipped the Vertex 4 into its place. Everything was all good and well until about a month ago when my computer started freezing and hanging (I'm not exactly sure what the difference is or if they're interchangeable words). To be more descriptive, I would have some applications open and it would randomly freeze, leaving me with a rainbow wheel I could control. The computer would then be essentially unresponsive other than the ability to click between apps, but if I did it a couple times everything would become completely unresponsive and I would be left with the spinning pinwheel. At first I thought the computer would right itself, but it stayed like that for 30 minutes one time, with the fan ending up blowing as hard as it could and the temperature of the computer becoming quite warm. The only thing I would be able to do at that point was to hold the power button to force restart the computer. Then the whole process would happen again, once more than 10 times a day. It didn't seem like the hanging was due to intensive use of the computer; sometimes I would literally just have one window open browsing the interwebs and it would give up on me, and other times it wouldn't happen until I had a billion tabs open streaming tv shows on every single one.
    At its very worst, I had to hard reset the computer yet again, but when it booted up the SSD was no longer recognized. It was as if I unplugged and removed it so there was nothing in the primary bay and I just turned the computer on. So it booted to the that thing with the options: recover from time machine backup, reinstall Lion, get help online, or disk utility. However, the SSD does not appear in the disk utility, I can't reinstall Lion to it (because it's not an option), and I can't use the SSD as a startup disk (also because it's not an option). I was completely sure it was a faulty SSD so I sent it to OCZ, who then crushed my hopes and told me there was nothing wrong with the drive.
    My hunch after several hours of digging throgh other forums is that something is wrong with my logic board, but I'm obviously posting this because I don't have any confidence in my hunch and would rather have some feedback before I go splurging on a diagnosis or - oh no! - another logic board.
    Thanks in advance, maybe.

    As I mentioned I sent it back to them, and they replied with this:
    "I would like to inform you that the RMA drive you sent back to us is no trouble found. Hence we will ship the same unit back to you. 
    Below is all the actions were performed on your drive.
    •        Writes every block on the drive many times.
    •        Verifies all data written.
    •        Reads every block on the drive many times.
    •        Tracks performance during this test, and makes sure it is within expected ranges.
    •        Tracks SMART data throughout this process to ensure proper functionality and recording of info."
    Then in a later email:
    "We thoroughly tested the drive on several machines. The drive has passed all testing with no faults found. The drive is functioning correctly as received. "
    I am actually praying that its my SSD or a broken SATA cable (no chance) because those are relatively cheap.
    Any ideas?

  • Authorization problems after upgrading MacBook Pro

    I just purchased a new MacBook Pro (upgrading from 1st generation Intel MacBook Pro) and am unable to get working without the authorization message constantly popping up. I reauthorize (it says I am successful), but the songs (I purchased through iTunes) still will not play due to the authorization message. I have tried deauthorizing from my old system, still no joy.
    I see many other messages alluding to this problem and tried burning to DVD (I don't have any CD's hanging around) and then re-importing. This does not work. Is this really a conscious decision on Apple's part, as I seem to see from some other posts, to trash all purchased content from iTunes, or is this an innocent technical bug which will (hopefully) be soon addressed? What bothers me is this seems to date back to at least July for many users.
    Please advise. All my purchases (music, audiobooks, movies) have all been legitimate, through the iTunes Store and I am going to be more than upset if this has nefarious legal sources, rather than an innocent technical foulup.
    If this is a simple PEBCAK (problem exists between chair and keyboard) I am happy to flout my studity for all to see. Just help me solve this problem.

    I had a similar problem with iTunes when I upgraded to the new 7.5 version. I didn't upgrade my system software or hardware, but I found the Article: 306424 helpful. My problem was with some music that I had purchased with an older Apple ID. I went to the Apple "password recovery" webpage to reset my password for the songs that wouldn't play using the old ID. It worked fine.
    If it is any consolation, I am an experienced Mac technician and I am very religious about maintaining my system so that upgrades and updates to software go well. I'm not saying that you haven't maintained your system, but you may want to "repair permissions" using disk utility. I find this step very important to do before and after any software installation or upgrade. I hope this reply helps in some way and best wishes on solving your particular issue.

  • Can I upgrade MacBook Pro hard disk drive next year?

    Hi there!  I'm new to the Apple Support Communities! 
    I am going to buy a new 13" MacBook Pro, 2.5GHz.  I am going to buy the base model, with a 500GB 5400 RPM hard disk drive.  Right now, I can't afford a 256GB solid-state drive, but I'll have enough for one by later next year.  So, I will have done some stuff on my Mac by the time I can upgrade it. I know how to install the drive itself, but how do I transfer my information?
    Here are the issues:
    1) I don't know how I would make it so I could boot from an external USB. 
    2) And I don't know how to get all my personal information from one drive to the other. 
    For "2", I think I could back up my Mac to a hard drive with Time Machine, and then restore from a backup.  But Time Machine couldn't back up the whole OS, right?  And what would the procedure be anyway?  Just turn it on when I'm done the upgrade?
    If someone who has done this before could provide step-by-step instructions, I would really appreciate it!
    Thanks,
    Solid-State Me 

    Yes you can replace the hard drive at any time.  Purchase a replacement drive from any store you like - newegg or mcetech are good stores (among many others) - and when you purchase the new drive, also purchase a drive enclosure.  Then download a program called "super duper" and follow the instructions to use that software.  When your drive arrives, put the new drive in the enclosure, plug it in to your computer and run "super duper" with the option to "make the drive bootable" and let it finish.  What it's doing is copying your drive onto the new drive.  Once the copy is finished, you can shut down your computer, remove the drive, install the new one, and put the original drive into the enclosure.  Now you have an external hard drive that is repurposed instead of throwing it away.  Keep that drive intact for a few weeks without erasing or adding data to be sure you are happy with the new drive and how it performs.  After that, use the drive to store files, backup the internal, transfer stuff, whatever.

  • Upgrading MacBook Pro (15" Late 2008)

    Hi everyone,
    I have the following MacBook Pro:
    http://support.apple.com/kb/SP499
    I have 4GB of RAM installed, currently (2x2GB). I've read that the computer will (unofficially) accept 6GB of RAM (4 & 2 GB):
    http://eshop.macsales.com/item/Other%20World%20Computing/8566DDR3S6GP/
    1) Will it indeed accept 6GB of RAM?
    2) Will they 2GB of RAM cause any sigificant improvement.
    Additionally, I have a 320 GB 5400 RPM HDD (which I've partitioned via Boot Camp, for Windows XP)
    I'm looking at the following drive:
    http://eshop.macsales.com/item/Seagate/ST750LX003/
    1) Will this drive drain my battery quickly?
    2) Can I clone the drive and keep the partion?
    3) Will both the RAM and the drive show significant improvement in my system?
    Thanks in advance for any help!

    OWC says your MacBook Pro can use up to 8gb of RAM. Be sure to read the Note at the bottom of the list. http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3
    To transfer your current hard drive I like the free application Carbon Copy Cloner. It makes a bootable copy of everything on your hard drive http://www.bombich.com/index.html You'll need a cheap SATA external hard drive case. Put the new drive in the case then format and partition the new drive and clone your old drive to the new one. Check that it's set up right by booting up from the external drive. Then replace your old hard drive with the new one and put your old one in the external case.
    To transfer your Windows Boot Camp I use Winclone. http://download.cnet.com/Winclone/3000-2242_4-172338.html?tag=main;dropDownForm  You use Winclone to create your clone image on your Mac partition before you use Carbon Copy Cloner. After you clone your Mac to the new hard drive and get it installed then you crate a new Boot Camp partition and use Winclone to reinstall your Windows XP.
    Here's a cheap SATA external hard drive case on Amazon. http://www.amazon.com/SATA-Hard-Drive-Case-Enclosure/dp/B001AAVA08/ref=pd_cp_e_0
      If you don’t have the tools to open up the MacBook OWC has a set for $5
    http://eshop.macsales.com/item/OWC/TOOLKITMHD/

  • Can't upgrade MacBook Pro (15-inch, Late 2008) to snow leopard

    I have a MacBook Pro (15-inch, Late 2008) and a copy of snow leopard on DVD. When I try to upgrade it says that snow leopard cannot be installed on this computer
    The details are as follows:
    Model Name:    MacBook Pro
      Model Identifier:    MacBookPro5,1
      Processor Name:    Intel Core 2 Duo
      Processor Speed:    2.53 GHz
      Number Of Processors:    1
      Total Number Of Cores:    2
      L2 Cache:    6 MB
      Memory:    4 GB
      Bus Speed:    1.07 GHz
      Boot ROM Version:    MBP51.007E.B06
      SMC Version (system):    1.33f8
      Serial Number (system):    W88460TU1GA
      Hardware UUID:    B0F6EC73-8CE7-58F8-B300-769B4BBB1353
      Sudden Motion Sensor:
      State:    Enabled
    The retail dvd I have has a part number: MC223Z/A
    I am currently running 10.5.8
    Anyone know what the problem might be?
    Thanks

    Perhaps the HDD does not have sufficient room.  It needs a minimum of 5 GB for Snow Leopard.
    In all other respects your MBP should be able to install 10.6.
    Disk MC223Z/A is the appropriate retail disk.
    Ciao.

  • I need to upgrade MacBook Pro

    Hello and happy new year to you guys!
    I own a MacBook Pro 15" 2,53 GHz mid-2009. since I'm a poor student I can't really afford buying a new one for now, I just purchased an iPad mini 2 (which I don't regret at all).
    So here I wanted to upgrade it since the ram seems to be not enough now (It has 2x2 gb), I always only have 800 - 150 MB left. I am not sure if it's why my Mac is a little bit slow, but anyway. I decided to upgrade the ram.
    The thing is I'm not sure if I can actually post link there but I was actually going to buy these:
    http://www.amazon.fr/Komputerbay-DDR3-SODIMM-broches-1066Mhz/dp/B0031GELDM/ref=s r_1_1?ie=UTF8&qid=1420154084&sr=8-1&keywords=SO-DIMM+DDR3+PC3-8500 the problem is there are multiple versions of it, like:
    2x4 Go
    2x4 Go Apple HS
    2x4 Go HS
    2x4 Go HS Apple
    I really wanted to do all this by myself I've checked here: http://support.apple.com/fr-fr/HT1270#link2 but I still have no idea what HS and HS Apple mean, please help.
    Since I am here I wanted to ask a few more question:
    -Do I also need to upgrade my Mac which has 250 GB with a SSD? Or just replacing the RAM will be enough for now? I don't really need a lot of space I have about 3 external disk with 2TB in.
    -Also is there a site cheaper than Amazon to buy the rams? I live in France.
    -And is it worth buying a new bluetooth card so I can use Handoff on my MacBook Pro with my iPhone 5 and iPad mini 2? While looking for upgrading my MacBook Pro I've read that I could actually upgrade the bluetooth to use Handoff.
    Thanks for reading. (Sorry English is not my native language)

    I looked at the Mactracker program and it says the memory specs for the Mid 2009 MacBook Pro 15" are:
    204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM
    and wherever you get them, make sure you ask them they are guaranteed to work in your particular MacBook or that you can return them if they don't work. One thing you might want to look at is faster memory - it might be cheaper. So if the memory were rated at 1333 MHz, it would run fine in your MacBook since it memory bus is only 1066 MHz (you can always use memory rated faster than your bus, but never slower). For example I just saw the 1333 MHz 8GB kit for $75 US (at http://www.bestbuy.com/site/corsair-2-pack-4gb-1-3ghz-ddr3-sodimm-laptop-memory- kit/1623588.p?id=1218273846150&skuId=1623588&ref=06&loc=01&ci_src=14110944&ci_sk u=1623588&extensionType=pla:g&s_kwcid=PTC!pla!!!66713924146!g!!55678495279&kpid= 1623588&k_clickid=6bd738e7-c831-4005-9bae-e56cd74712ff&kpid=1623588&lsft=ref:212 ,loc:1&ksid=6bd738e7-c831-4005-9bae-e56cd74712ff&ksprof_id=8&ksaffcode=2760&ksde vice=c) and the 1066MHz memory was $90 US - so 75 euros seems same as the $90 memory, but not as good a deal as the $75 memory or the $70 memory at http://www.bhphotovideo.com/bnh/controller/home?O=&sku=889312&gclid=CPu__NXA9MIC FegRMwodnHIAgw&Q=&is=REG&A=details
    Try to get memory with a lifetime warranty also. I've always had good luck with Amazon (and never a problem for returns). Also OWC or macsales.com is a good source, but not sure what issues are to sell from US to France and if VAT issues (is that only in UK?).
    But as long as you verify with seller the memory will work with your model of MacBook Pro and if they say it will and it doesn't, you should be OK as long as they are reputable and stand behind their sales. You should probably ask advice of friends in France who have upgraded their memory and see what their experience was where they bought their memory. And verify that the warranty will still be valid in France(?) or where ever you live also from where every you buy it.
    I think the "Apple HS" and "HS Apple" and "HS" are just minor typo's, as could not find anything like those comments in my looking at US memory web sites. When you get the memory look closely at all the memory chips on each of the cards - they should all be the same make/model/speed/type if good quality memory - not chips from several makers on the same card even if the specs might be the same.
    Another thing to keep an eye out for is the voltage rating of the memory - memory rated at 1.35v is higher quality than memory rated at 1.5v according to what I read at http://www.tomshardware.com/answers/id-1771553/35v-memory.html
    Also, the SSD upgrade I think is a very good idea - I did that on my MacBook and have been very happy with it - speeded things up a bunch compared to the regular hard disks. All the newer MacBooks now come standard with SSD drives and there's a reason why - they are a lot faster. Transfer speeds up to 5 times faster (about 150MBps max vs 30MBps for regular disk drives). Another thing to think about is if you don't use the DVD much you can put a second drive (like the SSD where the DVD drive fits) and have lots of disk capacity. The down side is if you use your DVD a lot, it's awkward to carry around an external DVD player, but having a SSD for speed (with the OS and APPS on it) and the hard drive with your data/user_files on it is very nice). Boot up speed with and SSD is typically under 20-30 seconds and from a regular drive about a couple of minutes if I recall right. You need to get a special bracket to fit in the space that the DVD drive was in that holds the SSD drive (or another 2.5" SATA drive). I got a Crucial CT480 SSD drive and have been very happy with it for the last year. Would guess they have faster drives now than it, so do a little research and ask lots of questions.
    Good luck..bon chance

Maybe you are looking for

  • File/Storage Errors in Server 2012

    Hi We are running Server 2012 (proper, downloaded from licensing portal) and are using it as an NFS server for some of our VM Ware machines. Yesterday the NFS storage went offline for approx. 15 minutes, and then came back online.  The following erro

  • Adding Airport card to 867mhz Ti Powerbook?

    Hi, I have a 867mhz Titanium Powerbook that i need to add an Airport card too, how do do this and what will it (roughly) cost?

  • Problem with CRM Content Management

    Hi all, I'm trying to specify a default folder template to use in business transactions, in order to show a default path in "Attachments" tab. I have configurated my template folder using the following IMG path: CRM-Basic Functions-Content Management

  • Using JavaBeans and not use BDK?

    I sort of understand Java Beans and currently writes custom beans for my installer using InstallShield MultiPlatfor Edition. I do register the bean(s) the same way as you do with BDK. Are there any samples or documentation so that I can write my own

  • Generating javadoc as word document

    Hi Can anyone help me to generate javadoc as word doc. Which doclet needs to be used and what is the settings needs to be done. What are all we need to generate it as word doc. Thanks, Govind