Upgrading Memory - Starts beeping

Hi, I have tried to upgrade my RAM from 4gb to 6gb
Right now, I'm running Elpida 2x2gb ram, single mode.
Can't get it to work with dual channel /:
And now I tried to use 2x1gb Kingston ram
Both the elpida ram and kingston are 1333 mhz.
But I can't get it to run in dual channel mode /:
Can someone please help me here.
I'm using IPISB-CH2 motherboard.
- TaGGii
This question was solved.
View Solution.

Please identify your desktop PC with its product name and product number.
If you are upgrading and want the upgrade to work right the first time:
1) Only replace memory in pairs of guaranteed compatible memory modules from well known manufacturers.
2) Find compatible memory by searching online with your desktop PC's complete product name + upgrade memory as keywords in the search.
4) Do not use the memory specifications from mtherboard specifications to match with memory modules that are sold by a vendor. Using this crapshoot method is a financial risk. It definitely increases chances of a PC not even passing the POST (power on self test) of the BIOS during the PC's boot process. It does not take advantage of a manufacturer's big selling point...Guaranteed compatibility.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

Post 10.3 upgrade i started getting a lot of issues

Post 10.3 upgrade i started getting a lot of issues1) The apps minimize on its own.2) Call disconnect/connect the options/animation are late in responding. Call receive and disconnect is not smooth and fast considering 1.5 GB RAM even 1GB androids are faster.3) Never seens the BB Maps working.4) Wi-fi direct does not recognize nearby android device which has wifi direct on so faster transfer is not possible. Neither android software like shareit work.5) Phone is too slow even though i dont have many softwares installed.6) Internet browsers close down automatically and when i tried a UC browser from android market(amazonapp store) that also had the same issue so uninstalled that.Please suggest what is wrong with my Z3 an my experience which was great with the new Z3 initially is now fading out and i feel like selling it off in just 4-5 month of use.

OK...then reload that one...the key is reloading the OS, whatever version it is. As for the version info, what is offered to you is controlled by others (normally your carrier)...you won't receive an offer via the official methods for anything newer until they approve it. The most common thing to do after an update that results in issues is to perform an OS reload. Sometimes, the update processes have errors and such...with a reload often curing the issues. The official methods, which will be controlled as to what exact OS versions you are offered:http://supportforums.blackberry.com/t5/BlackBerry-10-Functions-and/How-to-Reload-your-Blackberry10-O...The unofficial methods, which are cleaner, and allow you to choose an OS version that perhaps your carrier (or whoever it is controlling your offers) has been slow to approve:http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...http://forums.crackberry.com/bb10-leaked-beta-os-f395/bb10-os-archive-943672/Of course, before you start any of this you will want a good backup via LINK, a manual copy of your Device Memory to your PC, and full documentation of your configuration (account credentials, added apps, configurations, etc.). Sometimes, restoring from a backup returns to the device the very corruption one needs to eliminate, and reconfiguring from scratch can resolve that. Good luck!

When i hit power to turn on it starts beeping?

when i hit power to turn on it starts beeping?

Generally, if the screen remains black and it beeps when you turn on power, there is a memory issue. Could be a problem with a memory card or a logic board issue.
First, reseat the memory and see if that fixes it. Instructions on MacBook memory are here. If that doesn't work, and you have two memory cards, reverse the slots, ie, take one out then put the other in the slot just vacated then put the first card in the previous second card slot. If that doesn't work, try booting with just one card (if they are 2GB cards) and then the other card. If still not working, the next step is substitute known working memory for your memory cards. And if it still doesn't work, time to take the MacBook to an Apple store or Apple Authorized Service Provider.

Upgrade memory

it is possible to upgrade memory on iMac 24-inch Late 2006 up to 8 GB from 3 GB

Your welcome, there are hardware limitations on all the machines. If you want more than 4GB then it's time to upgrade to a new machine. You have gotten 5 1/2 years of service out of yours so you may be ready for one. Current iMacs can address up to 32GB of RAM and are orders of magnitude faster than your machine.

I need to upgrade memory slots on my Mac mid 2010 up to 4 GB module which is currently 2GB with two different 1GB memory slots.Is it compatible and would like to know about the cost?

I need to upgrade memory slots on my Mac mid 2010 up to 4 GB module which is currently 2GB with two different 1GB memory slots.Is it compatible and would like to know about the cost?

this sub forum is about running windows on macs maybe you should try
https://discussions.apple.com/community/notebooks/macbook

Upgrade memory on mac mini (late 2012) Core i7

I want to upgrade memory on Mac mini to 16 GB. Can you recommend some RAM models. Following are the readily avaliabe models for me.
Also curious to know what is ment by "value select"
1. Corsair 8GB DDR3 1600MHz Value Select PC3-12800 204 Pins, So-DIMM, Unbuffered, NON ECC , 1.5V
2 .Corsair 8GB DDR3 1600MHz Vengeance PC3-12800 204 Pins, So-DIMM, Unbuffered, NON ECC , 1.5V
3. Transcend 8GB DDR3 DDR 1600 Mhz PC12800

Macs can be very Fussy about RAM...
You can use these Links to check which RAM is suitable for your Mac...
http://eshop.macsales.com/shop/apple/memory/
http://www.crucial.com
It is Important to get the Correct and Matching RAM
Those sites also have videos on how to Install RAM should you need it...
Apple Instructions here > http://support.apple.com/kb/ht4432

Running fine, locks up and then starts beeping, 3 times

New iMac. Runs fine but sometimes it justs locks up and starts beeping. It's 3 beeps, pause, repeat.
What's the deal? Only way to stop is to power off with the button and reboot. Then all is fine, until next time.

Check your RAM, it sounds like you may have a loose, incompatible or bad module.
iMac (Mid 2007) and later models: About startup tones
Dennis

HT1941 While working in word computer turned off and started beeping

Okay, I was working on a word program and the computer turned off and started beeping. And doesn't respond to anything

Sounds like hardware failure. Take it in for service.

Trying to uninstall Kaspersky 2010 Int. Sec.; screen blanks, tower starts beeping; can't turn off.

Cannot uninstall Kasp. Int. Sec. 2010. Clicked first uninstall button, screen went blank, then tower started beeping--froze up. Cannot turn off computer; have to unplug. Next day booted up, computer had to 'check file system on C: Three steps to scan...1) verifying files 2) verifying Indexes 3) verifying Security Descriptors. Everything checked out, windows booted up, ok. After 3 minutes another warning: Windows is shutting down to protect the computer....etc.etc., screen went blank, beeping started, cannot turn off again.
I want to delete/uninstall almost everything from two years ago (computer not used since) and start over. Help.

Can not uninstall Kaspersky.

Upgraded both computers in the household and found Lion is too disruptive to workflow. Do I turn in the new laptop for a pre-Lion rebuild to keep Snow Leopard, or do I return computer and get upgraded memory to improve performance of existing MacBookPro?

Upgraded both computers in the household and found Lion is too disruptive to workflow.
Do I turn in the new laptop for a pre-Lion rebuild to keep Snow Leopard, or do I return new computer and get upgraded memory to improve performance of existing MacBookPro? I'm mostly still happy with existing MacBookPro, but Aperture doesn't work, the computer can't handle it.
Other possibility is setting up virtual machine with Snow Leopard server software on new computer.
Any opinions on what would allow moving forward with the least hassle and best workflow continuity?

hi,
what year and specs does the MBP have

Can anyone help me with upgrading memory in my older iMac? I currently on have 1gb of memory so as you can imagine my machine is quite slow.

Can anyone help me with upgrading memory in my older iMac? I currently only have 1gb of memory so as you can imagine my machine is quite slow. I check in my system profiler and it shows I do have a memory slot open. It is using a DDR2 and I was told that the latest are DDR3 and I need to find out if I can run that on my model number. This info came from a tech guy at best buy.

That is what I needed. You can upgrade to a maximum of 6gb of ram and need the following type:
200-pin PC2-6400 (800MHz) DDR2 SO-DIMM. You can easily find it online, here is an example: http://eshop.macsales.com/shop/memory/iMac/Intel_Core_2_Duo_PC2-6400

I have a mac OS x version 10.4.11 2 GHz Intel Core 2 Duo 1 GB 667 MHz DDR2 SDRAm. Can I use Crucial 2 x 1 GB 667 MHz DDR2 SDRAN to upgrade memory?

I have a mac OS x version 10.4.11 2 GHz Intel Core 2 Duo 1 GB 667 MHz DDR2 SDRAm. Can I use Crucial 2 x 1 GB 667 MHz DDR2 SDRAN to upgrade memory?

The downloads are probably .dmg files (disk images). You would open the disk image (double-click it) to find the application or an installer. If it's the application itself, you then drag the application to your Applications folder to "install" it. If it's an installer, double-click the installer to run the installer that installs the application.
NOTE: If you iMac is Intel, it's not a PPC G5.

When i use firefox my system automatically closes and dumping memory starts

when i use firefox my system automatically closes and dumping memory starts. This problem is not with interner explorer nor with google crome

Firefox sometimes uses more memory (RAM) than it should. This can make Firefox slower, and in extreme cases, it can even make Firefox crash. This article describes how to make Firefox use less memory.
https://support.mozilla.org/en-US/kb/firefox-uses-too-much-memory-ram

My notebook laptop start beeping after hp screen when i turn on my laptop.....

1. product name and number--- hp pavilion dv7-1260us notebook entertainment pc
2.operating system installed--- windows 7 64-bit
3.error message--- when i turn on my laptop it starts beep sound continuously after hp screen and touch pad also not working properly cursor continuously goes down automatically....
4. i jus installed windows updates.....

Hiya,
Is the beep sound happen while loading Windows? Is it coming from the speakers?
Have you tried your cursor in the Recovery Manager to see if it's a software issue? When the BIOS HP logo is on the screen press F11 to load recovery manager. If mouse works normally then you have a software issue, if issue still percists it is most likely hardware based.
I am an HP employee.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

Why my macbook air stopped working and started beeping?

I was working with my macbook air, but sunddenly it stopped working and started beeping. why this happend?

What sort of beeping?
Intel-based Mac Power On Self Test RAM error beeps
Power On Self-Test Beep Definition - Part 2

Upgrading Memory - Starts beeping

Similar Messages

Maybe you are looking for