Upgrading Mini Mac Hard Drive

I have a mid '06 Mac Mini (1.66 MHz w/80 GB HD) and want to upgrade to the largest HD possible. When I bought it Apple did not offer an upgrade.
Is this doable?
Thanks!

I just replaced the hard drive in my 2007 mini. I stayed with Hitachi since that is what Apple supplies with new machines. Hitachi has 2-1/2 inch SATA drives up to 750 GB in both 5400 rpm and 7200 rpm. Naturally the 7200 rpm models have higher transfer rates. The only issue I can think of with 7200 drives is higher heat generation.
I just visited an apple store and checked out their new mini and found it has 7200 rpm Hitachi drives in the server version. I also spoke to Apple Care and Hitachi and both of them assured me 7200 rpm drives are fully compatible.
Hitachi's web page for 2 1/2 inch TravelStar drives is
http://www.hitachigst.com/internal-drives/mobile/
You may note that Hitachi has Standard, Bulk Data Encryption (BDE) and Enhanced Access (EA) versions of their drives. Both the original drive in my mid 2007 mini and the drives in the new mini at the Apple Store were standard version models.
The best price this weekend here in Chicagoland for the Hitachi 320 GB drive I bought (7200 rpm) was at MicroCenter. Hope this helps.

Similar Messages

  • Time Machine Linked to New Upgraded Mac Hard Drive

    I recently upgraded my Mac hard drive. Unfortunately, Time Machine linked to the new hard drive. My computer hard drive icon now shows up as a Time Machine back-up drive.
    I went into Time Machine preferences and changed the back-up drive to my regular external back-up hard drive.  When I go into Time Machine Preferences - Select Disk my external back-up hard drive is the only drive listed.
    However, my Mac hard drive icon still shows up with the blue Time Machine back-up icon. Any ideas how to unlink my Mac hard drive from Time Machine so that it shows up in the Finder window with the typical gray hard drive icon instead of the blue Time Machine icon?

    felicityrose wrote:
    the replacement computer I wanted (and have not gotten) is a new unibody macbook, which does not have Firewire
    Does your drive also have a USB connection? Many F/W drives do. If so, you can do it directly. While USB is slower than FireWire, it's a whole lot faster than wireless.
    Can I just drag the whole back-up file from my hard drive onto the friend's computer and then connect via wireless?
    No, that won't work.
    Depending on what kind of Mac your friend has, you might be able to copy the whole drive to a USB drive via Disk Utility, then migrate from there to your new computer.
    Or is this an impossible dream and I am better off taking it in to the experts?
    Yes. Absolutely. Entirely. It will be well worth the wait.

  • Photo library on Time Capsule and want iPhoto to recognise it rather than import to Mac Mini small Hard drive

    As heading states, I have 100Gb of photos and want to have them "sorted" and viewable through iPhoto. at the moment when i add photos it is importing them from the TC to my mini's hard drive duplicating the pictures and using up valuable space. Is there a way of pointing iPhoto to the photo folder on TC as you would music and videos for iTunes library?

    Yes there is but you shouldn't.
    Here's why:
    1. Is this a wireless connection? If you're trying to edit the Library (that is, make albums, move photos around, keyword, make books or slideshows etc.) or edit individual photos in it via Wireless be very careful. Dropouts are a common fact of wireless networking, and should one occur while the app is writing to the database then your Library will be damaged. Simply, I would not do this with my Libraries. 
    Problems with a Referenced Library
    A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing. The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.
    This is an attractive option for some users at face value, but it contains a significant number of issues that you might want to consider before making the decision to run a Referenced Library
    How to do it:
    iPhoto -> Preferences -> Advanced and uncheck the box at 'Copy items to the iPhoto Library'
    Now when you import iPhoto makes an alias in the Library Package that points to the stored file. Note: iPhoto still creates a thumbnail of the image and it makes a Preview of edited photos inside the Library Package.
    Issues?
    1. You are responsible for file management. That's more work:
    You must first move the files from your camera to the storage location before importing.
    If you want to delete files then you must first trash them from iPhoto and then afterwards find them in your storage and trash them.
    Thereafter, you cannot move the files on early versions of iPhoto at all, on iPhoto 08 and later you may move them on the same Volume or Disk. If you move them to a new volume or disk the aliases my break. If they are on an different volume and you move them the aliases will break.
    You cannot rename the files.
    Migrating: moving to a new machine, moving the files to another disk are all a lot more complex.
    2. You gain no extra functionality from running a Referenced Library. Nothing. This is just storage. You still manage the files via iPhoto. You edit them with iPhoto or via iPhoto's External Editor setting, otherwise you're changes will not be available in iPhoto. You don't save  byte of storage space.
    3.  If you have the Library on one volume and the photos on another you if anything changes in the path to a file (Like if you upgrade your machine, move the files on the NAS or on to another one?) then the alias will break, and you'll have to repair it manually. For every photo in the Library. One at a time.
    You can run a Managed library from an external disk. Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.

  • HT203322 Cannot Install Mac OSX Snow Leopard on MacBook 10.5.8 because Mac Hard Drive has Time Machine on It?

    I have an old MacBook (2006?) with OS 10.5.8 that I would like to upgrade to Mac OS X Snow Leopard, which I have on DVD. When asked to select what disk I would like to install the upgrade to, my only option is the Mac Hard Drive icon with a big yellow triangle/exclamation point saying I cannot install there because I am running Time Machine on that disk.
    I have run searches using "Find" for any vestige of Time Machine left on my computer. I have deleted the icon from my dock. I have tried to run disk utility to delete just the Time Machine but can't target just that. I have rebooted after each of these steps. Nothing changes.
    It is Kafka-esque because I need to upgrade my OS so that I can upgrade my browser so I can read the question section of apple.com related to upgrading to Snow Leopard.
    Thanks for any help you can give.

    Thanks, seventy one. I do have everything backed up everything to an external hard drive, plus the most important stuff also on Dropbox. Given the age of this laptop, and given that I've been the sole owner and almost the sole user, I'm mystified as to why/how Time Machine is on my internal hard drive. I agree with you that it would defeat its purpose to back up files to the computer they're already on! It reminds me of the time a friend of mine put a bucket under his sink because there was a big leak in the pipe that was splashing into the cupboard. When the bucket was full, he took it out from under the sink and poured it down the sink to empty it. Ooops. Using Time Machine to back up files on the same computer it's installed on feels the same to me.
    It's interesting because I've found versions of my question posted by many other users, but I can't find an adequate response. Mostly, there are responses that don't directly address the problem, which in turn are rated by the petitioners as 50% or so helpful.
    I'm not sure what I'll do beyond searching a little more on the web and sleeping on it. In all seriousness, though, thank you for your help and suggestions. These Apple Help Boards are amazing, in large part owing to people like you who respond to strange plaints like my own.

  • What All Do I Need If I Want To Upgrade My Macbook Hard Drive?

    hey guys.
    i've tried reading up a little but i was hoping someone (or a few people) could give me some straight up answers.
    if i want to upgrade my macbook hard drive what all do i need? just the hard drive? or are there other pieces?
    also.. whats a good 250GB one? i found this one on ebay: http://cgi.ebay.com/NEW-2-5-Western-Digital-250GB-SATA-Harddrive_W0QQitemZ220271 134397QQihZ012QQcategoryZ158853QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
    is that one any good? i just know the name (Western Digital) and have heard good things about them...
    any comments are welcome.
    thanks!
    beau

    I got a 320GB sata 2.5" hard drive and installed it myself, its easy. I also got a caddy so I can use my old 120GB drive as a back up. Make sure u have everything backed up! Seagate and western digital drives are most popular. I asked similar q and got this answer"
    Extended Hard Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
    If your backup is bootable, then boot from the external drive and use SuperDuper to clone it back to the newly installed drive.
    Mac Pro 2.66 Ghz; MacBook Pro C2D 2.33 Ghz; MacBook Pro 2.16 Ghz Mac OS X (10.5.4) Intel iMac C2D 17 "; MacBook 2.0 Ghz.
    And
    Now, to install the hard drive, follow http://www.ifixit.com/Guide/Mac/MacBook-Core-Duo/Hard-Drive-Replacement/86/5/

  • I upgraded my macbookpro hard drive to 1 TB then migrated my files from time machine. I'm now locked out of the computer because the password is not the same as my usual one and one that was years old and not retreivable. How do I work around this?

    I upgraded my macbookpro hard drive to 1 TB then migrated my files from time machine. I'm now locked out of the computer because the password is not the same as my usual one and one that was years old and not retreivable. How do I work around this?

    Whether or not you are able to recover the data off the drive yourself will depend on if the drive suffered any impact damage in the crash. You can buy USB SATA or IDE adapters (Intel and almost all G5 use SATA) that will let you connect your hard drive to a computer (like a flash drive) to see if you can recover the data. If the drive has suffered physical damage if may not mount.
    If you know someone who has one of these adapters you could try using theirs, otherwise you could buy one but you take the risk of the data on the drive being non recoverable. Regardless, both are much cheaper than $1699!
    (Alternatively, if you know of someone with a Mac Pro or PowerMac G5 they may be able to install the drive in their machine and try to boot from or mount it and copy the data off.)

  • Can you upgrade a MacBookPro hard drive from a "750GB Serial ATA Drive @ 7200 rpm" to a Solid State Drive easily?  The info seems to say that it's as easy as plugging the new drive into a drive slot?

    I am about to buy a new MacBook Pro, but want to try out the Serial Drive 7200rpm before taking the plunge to use the SSD....Can you upgrade a MacBookPro hard drive from a "750GB Serial ATA Drive @ 7200 rpm" to a Solid State Drive easily?  The info seems to say that it's as easy as plugging the new drive into a drive slot?

    shldr2thewheel wrote:
    Fmaharg wrote:
    I am about to buy a new MacBook Pro, but want to try out the Serial Drive 7200rpm before taking the plunge to use the SSD....Can you upgrade a MacBookPro hard drive from a "750GB Serial ATA Drive @ 7200 rpm" to a Solid State Drive easily?
           Yes
    Fmaharg wrote:
    The info seems to say that it's as easy as plugging the new drive into a drive slot?
           It's easy, but not that easy.  You need to copy all the info from the drive currently in the mac to the new  one before you install the new SSD.  You can do          this by downloading cloning software (I use CarbonCopyCloner because it's free)
    Not to be picky but CCC is donationware, if you use it because of its quality you should send a little bit of money in appreciation, and as a bonus you get to turn the banner off.

  • Upgrading original iBook hard drive

    Hello.
    I have just discovered the Mac with a new second-hand original blueberry clamshell iBook. It's come with a 3GB internal HD which I find is puny. I want to upgrade, but I admit I'm scared after looking at the instructions on www.ifixit.com. I know that I need a 9.5mm tall replacement, but I'm totally new to Macs (used to Windows) and want to know every detail about upgrading, i.e. how to put OS 9 back on, are there specific Mac hard drives? what will happen when I turn it on just after the HD upgrade etc.
    I confess my ignorance, and thank everyone in advance for having read this message thus far.
    Original iBook G3 Clamshell   Mac OS 9.2.x  

    The process is a little involved. I recently upgraded my 10g on my iBook 466 SE Graphite to a Toshiba 40g that I had access to. It took me (I have built PC's from scratch-for years) 1:45 hours, only because I had never opened a iBook previously, and wanted to be careful. I used the instructions on www.ifixit.com. Most (if not all) laptop hard drives now are 9.5mm, only those that are (I believe) prior to 2000 are taller that 9.5mm. But any new hard drive you buy is the newer specification...9.5mm.
    As for the upgrading to OS X, if your iBook, it would be better to upgrade to panther 10.3.9 and not to tiger 10.4.x, but it will run tiger. You may need to install a third party program called xpostfacto, because I believe you do not have Firewire on that iBook and Tiger looks for that as a requirement.
    Also before you upgrade to OS X anything, you should hook that iBook up to internet and do a update to make sure you have most current firmware.
    The most current firmware for colored iBook's is :
    http://docs.info.apple.com/article.html?artnum=86117.
    Lots of threads on this. any help just search threads or post back here.
    Enjoy your new life as a MAC user.

  • Upgrading my PS4 hard drive

    Hi, I'm looking to upgrade my PS4 hard drive to a 2TB. I am looking for the cheapest deal possible and I was hoping you guys could help me out because I have no idea what type of hard drive will work and what won't. What should I be looking for in a hard drive? 

    Oran_Gina wrote:
    Trust-A-Zombie wrote:
    I upgraded to a 2TB yesterday. Was very worried as don't like doing things to do with changing in console components but when i found out Sony actually made the console and hard drive slot to be changed if you want I went ahead and did it. Bought this. 100% works. Took me 10-15 mins. Got everything installed back. Very simple process. http://www.amazon.co.uk/gp/product/B00I8O6OQ4?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00 Watch this step by step on what to do. https://www.youtube.com/watch?v=NLOSeGlY5oo  Just need USB Stick and a screwdriver. No need to go all technical like a lot of people will. Just buy that product in the link and follow the video. Simple That's all good, but for £20 less you get exactly the same hard drive. You just have to pop it out of a plastic case.  I guess if that's not something someone feels happy to do then by all means buy the stand alone drive.  We did mention it in the first couple of answers   I am in two minds to go for the portable HDD from Argos and crack it open or the M9 2TB from Amazon,it's the warranty I am more concened about.I have had the 1TB M9 installed in my PS3 for a few years and touch wood never had any problems,problem with cracking open the portable HDD it voids the warranty instantly so I am leaning more to the more expensive option.

  • How di i remove my e-mac hard drive?

    My e-mac is inoperable: I can transfer files to my i-mac by putting the e-mac hard drive into a USB case. How do I remove the e-mac hard drive?

    dave the bookman,
    Welcome to the Apple Discussions!
    Taner Sezer has a valid warning about the power switch when disassembling eMacs; there are also warnings not to come anywhere near the CRT assembly (especially the CRT yoke) without using a static discharge tool to disperse the dangerous voltage retained by the eMac even after extended time turned off. Bearing that in mind, you can Google "Apple eMac Upgrade Guide" and look for www.lbodnar.dsl.pipex.com in the results.
    One suggestion/warning: external USB hard drives (at least on PPC Macs) are known to be flakey and generally require third-party drivers with less-than-steller track records. A Firewire enclosure is more reliable; a dual Fireire/USB 2.0 enclosure, while costing more, will let you use the hard drive on multiple platforms (including Windows with the addition of software like MacDrive.

  • Maxtor Mini External Hard Drive slows or crashes my macbook

    I recently bought a Maxtor Mini external hard drive since I work with a number of large files, mostly CS3. Anytime I plug in my external hard drive, my computer slows down (trying to save a jpg, takes 15 minutes, copying a 20MB file from the external to the internal hard drive takes around 20 minutes). Anytime I open ANY application on the macbook, while the Maxtor is plugged in, the macbook crashes.
    When I bought the Maxtor, I formatted it for my Mac, with the CD that came with the external hard drive.
    Any suggestions?!
    thanks!

    You shouldn't need any CD provided by the manufacturer to format the drive. I can't see any particular format type causing that problem though. If you don't have anything you need on the drive now... try formatting it using Disk Utility (in your Applications/Utilities folder).
    http://www.larryjordan.biz/assets/articleimages/lj_journal01.jpg
    Try that first and see what happens. Like I said... I don't really see any particular format causing the problem you are having... but since we don't know what the CD you used did, it's best to start clean.
    Do you know if you actually installed anything on your computer from the CD?

  • If you delete a large file from the mac hard drive does it also remove it from time machine on external hard drive

    if you delete a large file from the mac hard drive does it also delete it from time machine on the external hard drive ?

    As the others say, no, the backup copy won't be deleted immediately, but it will eventually.
    If you want to delete all backups of a selected item, such as for space or security reasons, see #12 in Time Machine - Frequently Asked Questions.

  • How Do You "Move" Items/Applications from the Mac Hard Drive?

    Hi,
    As the subject line suggests I need to "move" things from my regular Mac Hard Drive to the additional Hard Drive I installed. My normal (forgive my lack of technical talk) hard drive is almost full. I would like to move things like iTunes, iPhoto etc to my new hard drive (1TB) so that I can free up space on my current more regularly used hard drive. Is there an easy way to do this?
    Ali

    There's various approaches you can take. Personally I would try to leave applications and the system on the main drive and just move data files to another drive. Some applications really want to be run from the main drive and will become cranky if you put them elsewhere because things aren't where they expect them to be.
    Moving files is often just a matter of dragging them to the new place. Note that if this new place is another drive the files get copied and you will have to delete the originals from the original drive once you are done copying.
    Applications can have a complex structure with bits and pieces of files all over the place, some may be invisible. While these can be copied, as I said before it is often best to leave them on the main drive.
    Just for your information, you posted your software question in the Apple.com > Support > Discussions > Power Mac G5 > Power Mac G5 (tower) hardware questions area. Your computer information says you are running a Mac Pro and Snow Leopard (which won't run on a G5). It doesn't really matter in this case but if you have a platform specific question in future, for fastest response you might want to make sure it gets into the correct forum.

  • I have an alias of one of my external hard drives in my trash. When I click on "show original" all my external H D 's and my Mac hard drive show up. How do I delete this icon from the trash without loosing all my files?

    I have an alias of one of my external hard drives in my trash. When I tried to delete it, it showed that I was deleting 80,000 files and counting. I stopped the delete process and when I clicked on "show original" all my external H.D.'s and my Mac hard drive show up. How do I delete this alias from the trash without loosing all my files? When I tried to drag it back to the desk top, it just made a duplicate and remained in the trash. When I turned off the external H.D., the trash was then empty. Tried rebooting the computer and then turning the external hard drive back on and the alias shows up in the trash again. Much help appreciated.
    Rich

    In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
    Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
    Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
    If it does contain data...
    http://support.apple.com/kb/TS2474

  • How can I have my contacts on the cloud and my Mac hard drive?

    How can I have my contacts both on the cloud and my Mac hard drive?

    go to icloud.com

Maybe you are looking for

  • Using a SQL data source and XML data source in the same template

    I am trying to develop a template for the Request for Quote report generated in Apps 11.5.10. I have loaded the data from the XML output into the template, but I am missing one field - I need the org_id from the po_headers table. Is it possible to us

  • Database connection error with JSP

    I'm having problems connecting to a mysql database via a helper object in my jsp pages. I've researched this for the last two days and nothing I have tried is yet to make a difference. My java code is essentially the following (minus try/catch for re

  • Oracle Service Bus 11g omit-xml-declaration="yes" not working in XSL-T

    I have the requirement of removing the XML header from xsl output. eg: <?xml version="1.0" encoding="UTF-8" ?> this part has to removed I tried using the following in XSLT: <xsl:output indent="yes" omit-xml-declaration="yes" />. It seems to work in a

  • Performance on views

    Hello All, We noticed performance issue when tryi ng to select data from a view. Below is the detail on this view: 1. View Definition: CREATE OR REPLACE FORCE VIEW baninst1.sgvacur (sgvacur_pidm,                                                sgvacur

  • Form 1099 MISC e-filing to IRS

    Hi All, What are the configuration steps required in SAP for a US Client in order to do1099 MISC e-filing into IRS website from SAP. Please explain the steps in detail or send any available configuration document to my likhit.fico at gmail dot com. T