Upgrading my MBP to SSD today, question...

So, my plan is to fresh install Lion on it when I get it, but my question is this. Am I better off, since I'm using a fresh Lion install to also install all my apps from scratch instead of using the migration assistant after Lion is installed? Is it irrelevant? (I have noticed that when I delete programs, the amount of space they should free up, they seem not to, so was thinkin fresh installs of everything would give me back some space?)
Also, any reason not to delete the printer driver file (~2.0gb) and just install the one driver I need?
Any other space saving tips that might help me out on my new SSD (going from 320 to 180gb)?
Thanks in advance for the help!

Am I better off, since I'm using a fresh Lion install to also install all my apps from scratch
Yep
any reason not to delete the printer driver file (~2.0gb) and just install the one driver I need?
Nope

Similar Messages

After upgrade my MBP from snow leopard to mountain lion all my smb connections stop to work.

After upgrade my MBP from snow leopard to mountain lion all my smb connections stop to work.
Now iám using mac os 10.8.2
I can see the server, I can choose the drive, but when try to open a folder the message on Finder is: You don't have permissions to see the content.
I already delete the key and try to connect again, but the problem persist. Already try change the ip from file server. Already try differents users. (admin, guest, etc...)
I have a windows server 2008 and a NAS working with SMB protocol. Both with the same problem.
That problem occurs only on Finder, if I try see the folder by Terminal, is possible to see my files.
Any Solution ?
Any Tip ?
Any Question ?

Not knowing how much RAM is installed in your iMac, your iMac can take a total of 8 GBs of RAM.
Before upgrading to Mountain Lion, I would strongly suggest installing the maximum 8 GBs of RAM.
Correct and reliable Mac RAM can be purchased from online Mac RAM sources Crucial memory or OWC (macsales.com).
Here is OWC's link to your model iMac and the RAM modules you will need.macsales
http://eshop.macsales.com/item/Other%20World%20Computing/8566DDR3S8GP/
You can purchase and download OS X 10.8 Mountain Lion from the Mac App Store in the OS X dock.
Before installing, it would be prudent to make a backup copy of all of your important data or your entire current system. Either using, optical discs, USB flash drives or external hard drives.
This is too insure protection of your data in case something goes wrong with the install of OS X Mountain Lion.
Good Luck!

How to upgrade Sata Hdd to SSD on Mac Book Pro 13"?

I have a Mac book Pro 13" and I want to upgrade my Harddrive to SSD. Also want to know how to do cloning, so that no data loss will be there.
Regards
Sid J

what you do is first put the the SSD in an external enclosure and hook it up to your mac. Then, open disc utility in your utilities folder. Erase the new SSD and reformat it as Mac OS Extended (Journaled). Then, run the cloning program and it will make a mirror image of the HDD currently inside your mac to the new SSD in the external enclosure. Then, remove the SSD from the external enclosure and put in it your mac. All done! . If you are unfamiliar with an external enclosure, they are very inexpensive..here is one I own: http://www.newegg.com/Product/Product.aspx?Item=N82E16817106115. Any further questions you my have either now or during the process, don't hesitate to ask, I have done this process a handful of times and it is very easy even for the non-techie.

Bought 17" Macbook Pro 2.8 Core 2 Duo on Monday, new MBP's out today!!

Hi
Hoping for some consumer advice here... I am a mac user for over 15 years but on Monday, I had a day off work and after looking at getting a new 17" Macbook Pro for well over a year to replace my dieing 15" version, I bit the bullet, and was at first happy with my purchase.
Then, obviously the i5 version is announced today - I am not pleased and contacting 'Cancom' Apple reseller here in Edinburgh and they said 'they didn't know new ones were due' and that 'that's just the nature of buying computers'. No Sorry, no sympathy, nothing. I can't return it as I opened the packaging and booted up the machine, which breaks the license agreement.
Ironically, Cancom's company strapline is 'The Apple Mac Specialists'.
I am really unhappy about this whole thing... the staff member was a patronising so and so when I called earlier which didn't help. I've contacted Cancom Customer Services about the matter but I wondered if anyone had any good advice or had been through any similar situations?
Cheers in advance

Thanks guys, yeah I normally use Apple.com/uk site to buy but it was handy for me on Monday during a day off and wasn't necessarily 'rash' as I have been considering it for almost two years! (my 15" MBP is running on one fan, at 90degrees!)
As far as not knowing about the cycle of upgrading the MBP's - I'm normally pretty clever with my research but for some reason I had in the back of my head, that Apple had brought out 3 new MPB's (all sizes) around 2 months ago!! I swear I'd seen them announced in a newsletter because I remember clicking through from my email client and looking at the specs online!
hmm, bit of a nightmare all this all in all. ta for the words though.

Slow Boot MBP 2012 SSD on 10.8.3 - Tried several fixes

Hi,
I have a MBP 2012, I upgrade it with Samsung SSD 830 256GB and 16GB RAM.
Boot: 50 seconds
Shut down: 20-30 seconds (uncheck documents on iCloud preferences and seems to shut down on 3 to 5 seconds)
Since the begining I figure how to make it work properly.
I made a backup with SuperDuper! and later, after some time when I want to repair permissions I realize I have lost my Recovery HD, after some Google magic I reinstall ML and solve the problem.
Start up time was too slow, then I do some search and anfer SMC + PRAM (NVRAM) reset everything seems to work fine, for some time.
Every time slow boots and shut downs come back, I do more searchs and find some fixes, but those fixes dont work the sameway for everybody, even on same machines and dont last forever.
Uninstall Little Snitch, Clean Caches, Fonts, Uninstall Parallels, Do some vudu with Cocktail and Onyx, Reinstall Mountain Lion, Update my System to the last 10.8.3 with the Combo Update, Selected my boot drive on system preferences (I just have one disc on my mac, no Fusion Drive so I dont understand why I have ti try this but did it).
I repeat some of the fixes, but always the same result, Boot time always on 50 seconds.
After some research on forums I look at mi Console and found those under BOOT_TIME
24/04/13 13:23:25,000 bootlog[0]: BOOT_TIME 1366802605 0
24/04/13 13:23:26,000 kernel[0]: vm_page_bootstrap: 3876606 free pages and 284930 wired pages
24/04/13 13:23:26,000 kernel[0]: rooting via boot-uuid from /chosen: 1EC27FBA-EC1E-3235-BE6E-C5F5B2D5244B
24/04/13 13:23:26,000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
24/04/13 13:23:26,000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/SAMSUNG SSD 830 Series Media/IOGUIDPartitionScheme/Macbook HD@2
24/04/13 13:23:26,481 com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
24/04/13 13:23:29,392 configd[17]: setting hostname to "MacBook-Pro.local"
24/04/13 13:23:29,393 configd[17]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
24/04/13 13:23:29,393 configd[17]: DHCP en1: INIT-REBOOT transmit failed
24/04/13 13:24:09,528 WindowServer[96]: Display 0x042728c0: GL mask 0x11; bounds (0, 0)[1440 x 900], 39 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ca3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009ca300000000042728c0
24/04/13 13:24:09,532 WindowServer[96]: Display 0x042728c0: GL mask 0x11; bounds (0, 0)[1440 x 900], 39 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ca3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009ca300000000042728c0
24/04/13 13:24:09,533 WindowServer[96]: CGXMuxBoot: Boot normal
24/04/13 13:24:10,000 kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
24/04/13 13:24:11,877 apsd[252]: Unable to bootstrap_lookup connection port for 'com.apple.ubd.system-push': Unknown service name
24/04/13 13:35:14,000 bootlog[0]: BOOT_TIME 1366803314 0
24/04/13 13:35:15,000 kernel[0]: vm_page_bootstrap: 3921181 free pages and 240355 wired pages
24/04/13 13:35:15,000 kernel[0]: rooting via boot-uuid from /chosen: 1EC27FBA-EC1E-3235-BE6E-C5F5B2D5244B
24/04/13 13:35:15,000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
24/04/13 13:35:15,000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/SAMSUNG SSD 830 Series Media/IOGUIDPartitionScheme/Macbook HD@2
24/04/13 13:35:17,642 configd[17]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
24/04/13 13:35:17,642 configd[17]: DHCP en1: INIT-REBOOT transmit failed
24/04/13 13:35:56,945 WindowServer[96]: Display 0x042728c0: GL mask 0x11; bounds (0, 0)[1440 x 900], 39 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ca3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009ca300000000042728c0
24/04/13 13:35:56,949 WindowServer[96]: Display 0x042728c0: GL mask 0x11; bounds (0, 0)[1440 x 900], 39 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ca3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009ca300000000042728c0
24/04/13 13:35:56,950 WindowServer[96]: CGXMuxBoot: Boot normal
24/04/13 13:35:59,860 apsd[265]: Unable to bootstrap_lookup connection port for 'com.apple.ubd.system-push': Unknown service name
configd[17]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
configd[17]: DHCP en1: INIT-REBOOT transmit failed
There is a 30 some seconds delay after this failed, on every boot I do.
Any clues to help me? I reported slow boots and shut downs on ML, hoping to see it solved some time on the near future, maybe on 10.8.4
This is the only thing "wrong" with my MBP, after boot is fast and love to work with it.
Thanks.
Sorry if I don't search enough, but try everything I found and can't solve it.

After some boots:
24/04/13 13:23:25,000 bootlog[0]: BOOT_TIME 1366802605 0
24/04/13 13:23:26,000 kernel[0]: vm_page_bootstrap: 3876606 free pages and 284930 wired pages
24/04/13 13:23:26,000 kernel[0]: rooting via boot-uuid from /chosen: 1EC27FBA-EC1E-3235-BE6E-C5F5B2D5244B
24/04/13 13:23:26,000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
24/04/13 13:23:26,000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/SAMSUNG SSD 830 Series Media/IOGUIDPartitionScheme/Macbook HD@2
24/04/13 13:23:26,481 com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
24/04/13 13:23:29,392 configd[17]: setting hostname to "MacBook-Pro.local"
24/04/13 13:23:29,393 configd[17]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
24/04/13 13:23:29,393 configd[17]: DHCP en1: INIT-REBOOT transmit failed
24/04/13 13:24:09,528 WindowServer[96]: Display 0x042728c0: GL mask 0x11; bounds (0, 0)[1440 x 900], 39 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ca3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009ca300000000042728c0
24/04/13 13:24:09,532 WindowServer[96]: Display 0x042728c0: GL mask 0x11; bounds (0, 0)[1440 x 900], 39 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ca3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009ca300000000042728c0
24/04/13 13:24:09,533 WindowServer[96]: CGXMuxBoot: Boot normal
24/04/13 13:24:10,000 kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
24/04/13 13:24:11,877 apsd[252]: Unable to bootstrap_lookup connection port for 'com.apple.ubd.system-push': Unknown service name
24/04/13 13:35:14,000 bootlog[0]: BOOT_TIME 1366803314 0
24/04/13 13:35:15,000 kernel[0]: vm_page_bootstrap: 3921181 free pages and 240355 wired pages
24/04/13 13:35:15,000 kernel[0]: rooting via boot-uuid from /chosen: 1EC27FBA-EC1E-3235-BE6E-C5F5B2D5244B
24/04/13 13:35:15,000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
24/04/13 13:35:15,000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/SAMSUNG SSD 830 Series Media/IOGUIDPartitionScheme/Macbook HD@2
24/04/13 13:35:17,642 configd[17]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
24/04/13 13:35:17,642 configd[17]: DHCP en1: INIT-REBOOT transmit failed
24/04/13 13:35:56,945 WindowServer[96]: Display 0x042728c0: GL mask 0x11; bounds (0, 0)[1440 x 900], 39 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ca3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009ca300000000042728c0
24/04/13 13:35:56,949 WindowServer[96]: Display 0x042728c0: GL mask 0x11; bounds (0, 0)[1440 x 900], 39 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ca3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009ca300000000042728c0
24/04/13 13:35:56,950 WindowServer[96]: CGXMuxBoot: Boot normal
24/04/13 13:35:59,860 apsd[265]: Unable to bootstrap_lookup connection port for 'com.apple.ubd.system-push': Unknown service name
Waiting for an answer I decided to start from RecoveryHD, delete my Macintosh HD and Reinstall Mountain Lion.
I have my data safe, I just have to copy my Documents and stuff and reinstall a bunch of apps if everything goes fine.
I would like to solve this other than have to do a Clean Reinstall.
Last night try to do a clean reinstall, but nothing change, still at 50 seconds boot.
Start to thinking if its something related to my disk. Seems to be the in the last firmware available for the SSD 830. TRIM is not enabled at this moment on my mac, and write & read speeds are fine.
After last boot found this:
26/04/13 13:28:09,338 root[109]: /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds
Google a little an then found this:
https://discussions.apple.com/thread/4070843?start=0&tstart=0 and decided to try a Hardware Test. The first Test ant fine in less than 5 minutes, now trying a complete test: After 75 minutes everything is fine. Hardware test OK.
I will continue updating this if I can fix it.

MBP with SSD or HDD

Hi,
Which MBP sells more or is more preferred by the people - MBP with SSD Or HDD Memory.
Thanks.

Apple charges far too much for their models with flash storage or SSDs. While I see a SSD as a necessity, I wouldn't buy one from Apple.
For more on MacBook Pros and SSDs, see my one and only user tip - Upgrading your MacBook Pro with a Solid State Drive. Note that it's only meant for non-Retina display models.
Good luck,
Clinton

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201

I downloaded an upgrade to my adobe reader today, and ever since my search engine has switched to yahoo and wont change back to google. I have a macbook pro, help please? Does anyone know how I can change this back? I have tried through my settings but it

I downloaded an upgrade to my adobe reader today, and ever since my search engine has switched to yahoo and wont change back to google. I have a macbook pro, help please? Does anyone know how I can change this back? I have tried through my settings but it doesnt work

Hi Timia,
If you are using Safari as a web browser :-
Open Safari, go to Safari menu > Preferences > General, and put Google as the homepage. Then, choose Google as your default search engine.
If you are using Google Chrome as the web browser :-
Open Google Chrome.
In the top right corner of the page, click the Chrome menu Chrome menu > Settings.
In the "Search" section, select Google from the drop-down menu.
Let me know if you still experience any issue.
Regards,
Aadesh

UPGRADE 1103 to 1159 - PAYMENTS CONVERSION QUESTION!

Hello,
UPGRADE 1103 to 1159 - PAYMENTS CONVERSION QUESTION!
This is the scenario, we are planning to do. Currently we have 11.0.3 in one box. We are planning for re-implementation for 11.5.9 in the new box. So we
have to convert approx 14 months of open and closed data for the historic purposes. (Like PO's, Invoices, Payments and ledger data etc.)
Again, these conversions cannot be handled through the front end using some Data Loader kind of tool etc...
Data Loader tool, I used a lot for loading Flexfield Value Set Values, Category Codes etc...
But my question is converting these AP_PAYMENTS related data in the back end. (Like Check num, Payment Batch ID, Invoice Number, Invoice ID, Supplier Number,
Supplier ID, etc.) from old 11.0.3 box to new 11i box.
Since there was some confusion is going on with Payments related areas, because there was now API's etc... some of them are telling it is very difficult to migrate "AS IS" into 11i. I also heard that oracle won't support this.
Just want to clarify clearly on this issues.
Because we are moving from the small box of 11.0.3 into Big box for 11.5.9. So we don't want to loose all the histories for about 20 months. especially open
Closed / Open - Invoices, Payments, PO's, REQ's, Active Items which are in the Open Blanket PO's, Employees, etc...
Of all these everything sounds like doable because they do have API's etc... Of course, I belive there is no API for the Vendors only. We want to know is this true for the Payments also.
Any urgent clarifications is very much appreciated with clear explanation.
Thanks in advance
Mani Varadan

The payment conversion is little bit tricky in term on its understanding and functionality.
There are lot of dependices of payments conversion on the others objects like invoice.
You need to be very clear in requirements.
Here is the extracted documents for giving you clear understanding about payments.
Overview of Process
Prior to creating a payment batch, four setup are required.
A.Define a bank for bank branches with which you do business.
B.Define bank accounts.
C.Choose a predefined or custom payment format.
D.Finally, define payment documents for disbursements for each bank account.
To give an overview of the steps required to create payment batch payments:
1) Initiate the payment batch by entering the criteria for invoices you want to pay. The payment batch process selects invoices, and then builds the payments. It determines which invoices will be paid on each payment document, and lists this information for you on the Preliminary Payment Register.
2) Make any necessary modifications to your payment batch, such as selecting additional invoices, deselecting invoices, deselecting suppliers, etc. Once modifications are complete, the modify payment batch process automatically builds the payments if any invoices were added.
3) Format payments to produce an output file.
4) Print checks from the output file if you are not creating electronic payments or sending the output file to a third party for printing.
5) Confirm the payment batch by recording the document numbers associated with each payment. During this step, the invoice status is updated to Paid and a document number is associated with the invoice and invoice payment.
As conversion(from 11.0.3 to 11.5.9) is concern step 3,4 is excluded from the standard processes.
These are the tables involved during the payment conversion.
AP_SELECTED_INVOICES_ALL
AP_INV_SELECTION_CRITERIA_ALL
AP_INVOICES_ALL
AP_PAYMENT_SCHEDULES_ALL
These are background (concurrent) processes involved in batch process consists of the following
a. Autoselect
b. Build Payments
c. Preliminary Payment Register
d. Format
e. Confirm
f. Final Payment Register.
10.7:
If you are using the application in character mode, navigate to the Reset Payment Batch form. The navigation path is
\Navigate --> Controls --> Payment --> ResetPaymentBatch.
Select the payment batch name and the system displays the status of the batch. Your options for proceeding vary according to the batch status.
11.5.8/9
You can perform actions on your batch in Payment Batches form by clicking on the Actions button. The appropriate actions are highlighted depending on the status of the batch.
THIS SECTION TALK ABOUT THE DETAIL TECHNICAL OVERVIEW
Payment Conversion Technical Overview
For the conversion is concern we are following four-step process
I.Defined and prerequisite steps as discussed above
II.Selecting the Invoice
III.Building the Payment
IV.Confirm
THESE ARE THE PREREQUISITE SETUP
We are assuming the bank set is already done from 10.7 to 11i.Bank set up means bank account id, and its corresponding payment format.
For this purpose we are using mapping function for bank account id and on that basis we are getting corresponding checks stock id.This means defining a payment documents for disbursements
SELECT INVOICES
When a payment batch is started one row for each record is created in the
AP_INV_SELECTION_CRITERIA_ALL table.
This table stores the criteria that a payment batch uses to select invoices for payments. The module name for the Auto Select process is APXPBSEL. The Select Invoices, or AutoSelect, is the first step in the payment batch process.
When we run a concurrent program the AutoSelect process starts by loading records that meet the invoice selection criteria into the table AP_SELECTED_INVOICES_ALL from the tables AP_INVOICES_ALL and AP_PAYMENT_SCHEDULES_ALL.
The criteria that AutoSelect uses to determine which record to select from AP_INVOICES_ALL and AP_PAYMENT_SCHEDULES_ALL is stored in AP_INV_SELECTION_CRITERIA_ALL.
To be sure that no duplicate invoices get selected, invoices that are already selected in another payment batch are not selected. Invoice payments that have no remaining payment amounts are not selected either.
BUILD PAYMENTS
The module name for the Build Program is APXPBBLD. From the list created by AutoSelect, the Build program determines which invoices will be paid on each
Payment document, and lists this information on the Preliminary Payment Register if Selected. The Build program is spawned when AutoSelect has completed. When the Build Program starts, the application uses information from the table AP_SELECTED_INVOICES_ALL to create rows in the table AP_SELECTED_INVOICE_CHECKS_ALL.
In addition to creating rows in the AP_SELECTED_INVOICE_CHECKS_ALL, the build payments program also performs the following tasks:
Assigns document numbers for payments
Assigns Check Ids
Renumbers the remaining documents starting from the first_available_document
Updates the payment batch status to BUILT
Since we are doing conversion from 10.7 to 11i where all payments need to converted hence we are keeping payment batch status as FORMATTED
CONFIRM
This is the final step for the payment batch process, where we will pick a payment batch from front end, and then making confirm. The menu for this
AP Payable =>Payment Batches form =>by clicking on the Actions button
Internally the confirm program first updates the AP_SELECTED_INVOICE_CHECKS_ALL records,
then transfers those records to
AP_CHECKS_ALL.
In addition, the AP_SELECTED_INVOICES_ALL
records are transferred into the corresponding
AP_INVOICE_PAYMENTS_ALL,
AP_INVOICES_ALL and
AP_PAYMENT_SCHEDULES_ALL.
Table Involved in Payment Batch Process
These are the various table involved in the payment process of 10.7 and 11i.It is recommended that if corresponding earlier conversion is done then use the mapping function to get the new value.
oAP_SELECTED_INVOICES_ALL
oAP_INV_SELECTION_CRITERIA_ALL
oAP_INVOICES_ALL
oAP_PAYMENT_SCHEDULES_ALL
oAP_SELECTED_INVOICE_CHECKS_ALL
oAP_CHECKS_ALL
oAP_INVOICE_PAYMENTS_ALL
oAP_PAYMENT_SCHEDULES_ALL
oAP_INVOICES_ALL
oAP_BANK_ACCOUNTS_ALL `
Common Issue:
1.Determine the status of the Payment Batch?
A: Query up the Payment Batch in the Payment Batches Summary window to view the status. If you can not get into the application, you can select the status from SQL*Plus:
SELECT status FROM ap_inv_selection_criteria_all
WHERE checkrun_name = ?<payment batch name>?;
2. Dont change the last update date
We are doing the conversion for payments, hence we cant change he last_updated_date to sysdate as this will create a problem by concurrent program, in that case we need to populate the field for FUTURE_DATED_PAYMENT=N
3. dont populate the value for INVOICE_PAYMENT_TYPE
If there are some prepayments in the conversion process donor populate this field and pass NULL, otherwise this will create a duplicate invoice, which will cause a problem for concurrent batch for payment.
Hope now you will be very clear about the process.
let me me offline, if you need further.
regards
sanjit
[email protected]

Have a new Dell Latitude with Adobe X Standard pre-loaded. Purchased upgrade to Adobe XI Pro today

Have new Dell Latitude laptop with Adobe X Standard pre-loaded. Purchased upgrade to Adobe XI Pro today and have Serial #. Installed the upgrade successfully, but it is asking for the Serial # of the previous version... I don't have that Serial# and in the process of the upgrade it unistalled the old version so don't really have a place to look back to. What next?

Hi Dan,
From where did you order the older Acrobat X Standard?
If it was a boxed product then the serial number must be behind the case, else if it was downloaded, login to your Adobe account and check the same.
Else contact Customer care or Chat with a tech support and they would be able to help you.

I upgraded to v3.6.22 today and have lost the ability to ctrl-click a link to open the link in a new tab; how do I get this back?

I upgraded to v3.6.22 today and have lost the ability to ctrl-click a link to open the link in a new tab; how do I get this back?

Strangely enough, putting my laptop into Hibernate mode solved the problem. It didn't even take a reboot.
Running Windows Vista Enterprise SP2.

How to upgrade my MBP glossy screen to antiglare??

I already purchased the MBP 15 however I want to change the screen to antiglare. I know I can install an antiglare film but this hits the image.
How to upgrade my MBP glossy screen to antiglare after I already purchased the MBP? Is it possible to do it through apple?

That would mean replacing the top cover of hte MBP, something on the order of $500...and would have to be done by Apple or an authorized Apple repair or it will void the warranty. You could try talking to an Apple store genius bar person and see if they would do that but it will not be cheap.

've never used a Mac before, recently i purchased a MBP13" which came loaded with LION OS by default. I upgraded the OS to OS10.7.2 when prompted. Now after the upgrade, my MBP feels very slow - specially when typing emails !! What is the solution ??

I've never used a Mac before, recently i purchased a MBP13" which came loaded with LION OS by default. I upgraded the OS to OS10.7.2 when prompted. Now after the upgrade, my MBP feels very slow - specially when typing emails !! What is the solution ??

After an update or installation, your MBP may take some time to index its files. Give it some time - but if you don't see any improvement, post here - you'll get an answer!

How to upgrade from HDD to SSD in Mid 2010 13inch MacbookPro?

I am upgrading from HDD to SSD and would like the step by step direction of how to do it on my 13inch MacBookPro mid 2010. Also, I would like to do a clean install of the OS onto the new SSD, and simply transfer my data(i.e. documents, pictures) from the old HDD to the new SSD(Samsung 500GB)
Any detailed directions would be appreciated. You may send responses directly to my address: ******* Thanks in advance
<Edited by Host>

Tolefe1 wrote:
Thanks. How do I booth to IR? Won't I need to connect to the internet to be able to booth to Internet Recovery... Please give steps as I am pretty new to this.
Turn the Mac on (or reboot it) and press command-option-R as soon as you hear the startup chime. Hold the keys down until you see a globe, then release. When the Recovery Menu appears you choose Disk Utility and format the SSD for use in a Mac (Erase>Set Format to MacOS Extended (Journaled), then exit Disk Utility and choose Install OSX
You will need to be connected to the Internet and your Mac should detect your network and ask for a password automatically when Recovery Starts.

I uploaded the upgrade to Photoshop Elements 12 today. I got a "dispatching error" for Photoshop Elements, but was able to download Premier elements! I did not order Premier Elements, so I'm confused (unless this was a package that I did not know about)

I uploaded the upgrade to Photoshop Elements 12 today. I got a "dispatching error" for Photoshop Elements, but was able to download Premier elements! I did not order Premier Elements, so I'm confused (unless this was a package that I did not know about). I really want the Photoshop Elements upgrade - not Premier Elements. I do hope I did not pay for both - I only want one. Help!

Maryrhire910 I am sorry that you are facing difficulty downloading and installing Photoshop Elements 12. Are you downloading the installation files from Download Photoshop Elements products | 13, 12, 11, 10? If so what specific error are you receiving?

Upgrading my MBP to SSD today, question...

Similar Messages

Maybe you are looking for