Upgrading my old Satellite Pro L300-1A9 (PSLB 9E)

Hi there! i am going to upgrade the cpu, ram, hdd and maybe heatsink. I would be very grateful if someone could help me
Here are the basic specs of the laptop:
Intel Centrino 2 Platform CPU: Intel Dual Core T3200 (2Ghz, 667 Mhz FSB, 1 MB L2).
Chipset Intel GL40 Express
Integrated GPU: Intel GMA 4500MHD (1341 MB, PCIExpress 16x)
2+1 GB RAM DDR2 800 Mhz
HDD 160 GB 5.400 rpm Serial ATA-2.
I'd like to keep the upgrade under 200 EUR but i'm flexible. I am buying from Spain. These are the parts i've looked at
T9300 6M Cache, 2.50 GHz, 800 MHz FSB --> 58 EUR here
4GB DDR2 800MHz sodimm RAM --> 55 EUR here, here or for example here
MX100 SSD --> 69 EUR 128GB or 99 EUR 256 GB
Cheap heatsink for socket P (478) --> around 10 EUR, i.e. here or here or here
Now my queries :
Will all this be compatible?
Do you know any site where i can get cheaper ram? I'd love to get 2x4 GB
Is there any problem about the heatsink upgrade? Do you know if socket 775 heatsinks are compatible with 478? I ask because i like Zalman CNPS 8900 (33 EUR) but in the official documentation only mention 775 socket but i've read it is compatible (i can't find the link but i swear xD) Here is a post explaining the installation of this heatsink.
If you have any advice or info i should read before doing this please tell, thanks for reading, cheers!

You wouldn't need to upgrade the heatsink from a T3200 to a T9300. The parts you listed should all work. I have several posts on here about upgrading the L305 and L355's, which are the same series as the L300 and L350's.
Qosmio X875 i7-3630QM, 32GB RAM, OCZ SSD Qosmio X505 i7-920XM, PM55, 16GB RAM, OCZ SSD
Satellite Pro L350 T9900, GM45, 8GB RAM , Intel 320 SSD (my baby) Satellite L655 i7-620M, HM55, 8GB RAM, Intel 710 SSD (travel system)

Similar Messages

How to install Windows XP in Satellite Pro L300-1A9?

Hi!,
first of all, sorry if I'm asking something really obvious, but I'm quite new with this issues...also sorry for my English, I'm not native.
I have a Toshiba Satellite Pro L300 1A9 with Windows Vista preinstalled but the thing is I prefer Windows XP. I have tried to install it but it won't work.
I have read lots of posts and comments about this issue in this forum and also in the web. The problem is I don't know if the procedure and the drivers to download are the same for all the L300 models. Mine is L300 1A9.
Anyone could give me some extra simply instructions (I'm a beginner) about how to do solve this problem or any link relating this issue? I have seen many of them, but none about this model L300 1A9.
Thank you very much!!

Hi Lars_3,
thank you very much for your reply and interest.
When I say that installing Windows XP doesn't work, I mean that my laptop has Windows Vista but I have tried to reinitialized (format) it to install Windows XP, but when I run the Windows XP (original) disk an error message pops up and I can't continue the installation.
I have had a look to the Toshiba's downloads link you posted, but there's no mention to the L series model. The options available are for M-Series and Net-Book series, so I wonder if it is possible to use one of them for my Toshiba Satellite Pro L300 1A9?
Thank you very much for your kind help!

CPU upgrade of my Satellite Pro L300-152

hello
my laptop is a :
Toshiba Satellite Pro L300-152
Model no. PSLB1E-01R015EN
Celeron 560 2.13GHz
Can someone tell me which CPU I can safely upgrade this with, I use it in a fairly cool environment and would like just a few more 100mhz from it.
Thank you for your support

Before we start discussion about CPU upgrade check please this Toshiba document - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm
My personal opinion is that CPU upgrade will not help much and you will not realize some big difference in notebook performance. In my opinion you need more RAM or better and faster SSD. This brings better and more performance than some CPU with 100mhz more than old one.

8 questions from new owner of Satellite Pro L300

Hello all forum users!
I bought a new Toshiba laptop, the Satellite Pro L300, and have until 14 January to test it - if it looks like it isn't working properly I'll return it to the store where I purchased it.
Here's a list of questions I have:
1. Every time I turn on the laptop or it comes out of suspended or hibernation mode, and when I turn it off, the cd/dvd drive makes a loud mechanical clunky noise.
It sounds to me like the carriage that carries the laser and optics is running into a mechanical stop.
Is this normal?
2. There is one hot subpixel on the display (blue) and according to the Toshiba info in the box, this is normal and is not cause for return.
Should I be concerned about this?
3. When I run the memory test at system boot, it states that it will start windows automatically at test termination, and show me the results of the test.
It runs the test, starts Vista, but I don't see any results report.
Where do I find this report?
Is there a known problem with this test?
4. The Toshiba utility program to perform diagnostics from within Vista does not work. Every time I run the test (PCdiag.exe) I get a Vista error message saying a fault was found in KERNEL32.dll.
Where can I get a fix for this?
I've already installed the updated files on Toshiba's web site for the 'Value Added Pack', which is where this utility is located, but still get the error message.
5. I would like to access the bios settings at boot, but haven't found the way to do it yet.
F2 gives me a menu for memory test or normal system boot.
Esc doesn't get me into bios setup either.
There is a Toshiba bios utility I can run from Vista, and from what I see any bios firmware upgrades are also to be done through Vista.
Is there a way to access bios at boot?
6. I would like to run XP on this system and understood that this model (Pro L300 PSLB1E) was XP compatible, and that I should be able to download all drivers from Toshiba to run on XP.
Has anyone done this?
7. The laptop installed and configured Vista basic when I did the first power on, but the license sticker on the bottom of the laptop has a product key for 'Vista Business OEMAct'. I was sold this laptop as having Vista Business with the option to downgrade to XP Pro. The box didn't come with any cds or dvds, and no manuals explaining how to install Vista Business.
This is enough reason to return the laptop to the store where I bought it, which is a hassle I would prefer to avoid if I can install Vista Business.
Can anyone help me understand what is happening here?
8. Is there a way to contact technical support by email?
Thanks in advance to anybody that can answer any of the above questions!

> 1. Every time I turn on the laptop or it comes out of suspended or hibernation mode, and when I turn it off, the cd/dvd drive makes a loud mechanical clunky noise.
My CD/DVD drives make similar noise too from time to time. Not always but sometimes. I think this appears because the drives laser lens calibrates in the right position.
> 2. There is one hot subpixel on the display (blue) and according to the Toshiba info in the box, this is normal and is not cause for return.
Well, you need an certain amount of dead pixels to get a screen replacement
Please check this FAQ:
http://aps2.toshiba-tro.de/kb0/TSB5400ZD0002R01.htm
> 3. When I run the memory test at system boot, it states that it will start windows automatically at test termination, and show me the results of the test.
There is no problem. I believe you mean the memory test while POST (power on self test). If there would be a memory fault then your notebook would not boot up properly.
> 4. The Toshiba utility program to perform diagnostics from within Vista does not work. Every time I run the test (PCdiag.exe) I get a Vista error message saying a fault was found in KERNEL32.dll.
Hmm the Value Added Package contains the PC diagnostic tool for Vista. I would recommend removing the old VAP and reinstalling the new downloaded from the page.
> 5. I would like to access the bios settings at boot, but haven't found the way to do it yet. F2 gives me a menu for memory test or normal system boot. Esc doesn't get me into bios setup either. There is a Toshiba bios utility I can run from Vista, and from what I see any bios firmware upgrades are also to be done through Vista.
The notebook seems to use the Phoenix BIOS and therefore pressing the F2 button should enable the BIOS. Press the F2 immediately after notebook has been powered up.
> 6. I would like to run XP on this system and understood that this model (Pro L300 PSLB1E) was XP compatible, and that I should be able to download all drivers from Toshiba to run on XP.
Such XP drivers are placed on the Toshiba European page.
>7. The laptop installed and configured Vista basic when I did the first power on, but the license sticker on the bottom of the laptop has a product key for 'Vista Business OEMAct'. I was sold this laptop as having Vista Business with the option to downgrade to XP Pro. The box didn't come with any cds or dvds, and no manuals explaining how to install Vista Business.
Never hear that this notebook would be delivered with Vista business As far as I know this series has been preinstalled with Vista Home Premium
> 8. Is there a way to contact technical support by email?
If you have some problems with your notebook you can contact your ASP in your country.

Satellite Pro L300 -software-service says I need update for graphics driver

I downloaded the DesignByMe software from http://designbyme.lego.com/en-us/default.aspx
The installation run without problems, but when I want to start the program it restarts over and over again. The picture doesnt load fully, instead there are black spots. I cant click on anything nor close to programm .I thought maybe the installing process didnot finish properly so I downloaded the software again but the problem is still the same. Im using a new Satellite Pro L300 28w with Windows 7 and Mozilla Firefox 3.6
I contacted the lego support and they answered: "You most likely need to update your graphics driver. Please contact your computer manufacturers customer service or website for a free upgrade"
Is this likely and if so which upgrad edo I need?

Hi
I dont know if updating your display driver can solve this problem but if the manufacture of the software says that its worth a try!!! ;)
The update is pretty easy: Firstly download the latest version here:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
If you have downloaded the latest version, remove the old one firstly. Check the software list in control panel and follow the screen instructions. I assume you have to make one restart and after this you can install the downloaded version.
Good luck! :)

Satellite Pro L300 BIOS update problem

Hi
I've an Satellite Pro L300 (PSLBHE).
I downloaded the new bios file and started the upgrade. A window appeared and showed the old and new bios version (v1.70 -> v2.20). About in 1 min. my laptop screen turned to black but HDD green light flashed and didn't anything about 15 mins. After I pushed the power button and the laptop shutdown. Now if I push the power button nothing happen just blank (black) screen and the HDD flashing light.
What's the problem? What can I do? Please help me.
gjon

Problem is that BIOS update is screwed up now. Obviously BIOS update was interrupted and now the BIOS chip is damaged.
What you can do now?
Unfortunately not much. What you need is professional help so I recommend you to contact nearest Toshiba service and ask for help. Sorry.

Satellite Pro L300 won't start

I have got a Satellite Pro L300 laptop and it will not do anything on startup (in other words on pressing the power button and not going past very first screen).
The keyboard works, but F2 ,F8 or F12 won't do anything, I can here the hard-drive powerup but its like no-one is at home. I don't know if its the motherboard or the on-board battery. The computer is about 7-8 yrs old
Can anyone help.

Yes, this it correct; the Ram modules should be checked. In my opinion you should use good, tested modules.
Some years ago my notebook did not boot up because one of the modules died.
This affected the notebook functionality and display stayed black even pressing the power button.
At the other hand you could try this simple workaround. Sometimes this helps too:
- remove battery, disconnect AC adaptor
- press and hold the power button 30 sec long
- connect both parts battery and ac adaptor and power up the unit.
Good luck

Satellite Pro L300-1FN does not boot - hangs at BIOS splash screen

My Satellite pro L300-1FN is refusing to boot up. When switched on the laptop displays the toshiba/insyde H20 BIOS splash screen and the "Press F2 go to Setup Utility, F12 go to boot menu" message and flashes the hard disk access light but does not attempt to continue loading. I have left the bios at the splash screen but it does nothing for many hours on AC or runs the battery flat while on battery.
Is there a way of re-setting the BIOS on this unit? If it were a desktop unit I would remove the CMOS battery to force a BIOS reset but this is impossible on a laptop. The hard disk is fine as I have connected it to another system to remove valuable data.

*I managed to fix this issue* ,,, thanks to some other dudes on other forums
What i did was Format a Floppy disk as MS-DOS boot using a Windows XP PC and USB floppy drive, then downloaded the latest BIOS for my L300-1BW laptop model, copied *.fd bios image to the floppy disk and renamed it to BIOS.fd.
Connect FDD to the toshiba laptop with out AC connected. Held Power button for 12 seconds, connected AC adapter, then held Fn+F, powered on , and kept the Fn+F keys held down for about 10 seconds into the reading of the floppy drive just to be sure, then let go. The screen was black throughout the process. I left this for a few minutes, or until it had finished, the laptop rebooted itself, and voila, it now goes passed the TOSHIBA POST logo screen :)
I hope this helps others with Toshiba Laptops. should work for any Toshiba laptop.

Satellite Pro L300 1AI LCD screen backlight not working

Hi All,
I have a Satellite Pro L300 1AI running Windows Vista the computer boots up and works fine but the backlight on the screen does not appear to be working.
Are there any settings in Vista that can affect this (other than the Fn key command on the keyboard and the settings in Control Panel)? Strangely it only seems to have happened since i installed Skype but I can't see how that could possibly affect it.
Any help is gratefully appriciated...

Hi
Whats wrong exactly? Is notebooks display brightness too low?
Do you see everything on the screen like behind a thick fog?
Well, usually the FL inverter controls the display backlight and if the FL inverter starts to malfunction then you would get the problem like this one.
There is no other solution as to replace this FL inverter.
Its a tiny part behind the display frame I think its a job for an ASP technician
Greets

Satellite Pro L300 1AD Can't install display driver on Windows XP

I just installed XP on my Satellite pro because my internet modem doesnt work with Vista.
I went on the main Toshiba website to install the display drivers but they wont install, it keeps bringing up the message "this driver is not for this computer please contact manufacturer".
I dont understand why because all the other drivers I downloaded off the same page work, its just the display one. Does anyone know whats wrong?

Have you downloaded the newest driver for Satellite Pro L300?
On the Toshiba website its version 6.14.10.4953.
Alternative you can try the drivers from Intel but normally the Toshiba driver should work.
I always use the Toshiba driver and never had problems.
By the way, I looked on this Toshiba website:
http://eu.computers.toshiba-europe.com

Satellite Pro L300/L300D series wont start properly

Hi guys
I got a Toshiba Satellite Pro L300/L300D series and basically one day the laptop just stopped working and whenever I turned it on I just got to this blank page saying press CTRL + ALT + DEL to restart the system. So I tried to reboot it pressing F12 and using a new copy of Vista Ultimate. However when I come to install Vista on the drive it states that there is no drive present on the system.
Does anyone have any idea how I can overcome this problem, your help would be much appreciated.
Thanks

>What do I need to do and how can i create a partition if the computer wont start.
Can you please explain this again? It sounds pretty illogic to me. If your computer wants start how you can try to install OS?
Sorry my friend but now I am asking myself do we understand us correctly or I write about thing A and you write answer about something that I can define as thing B.
Again:
Start your notebook and press F12 to enter boot device options
Put Vista installations DVD into optical disc drive
Choose CD/DVD drive in the list and press ENTER
Installations DVD will load (Windows is loading files...)
Follow the menu on the screen
When the stage with partitions is shown on the bottom right side (Drive options advanced)
The additional menu on the bottom will be shown
Delete all listed partitions/partition
Use option NEW and create new one
Try to install Vista on this new created partition.
Can you do this or not?

Satellite Pro L300-EZ1004X - TouchPad stopped working, BIOS update does not help

I have a Satellite Pro L300-EZ1004X laptop. Few days ago TouchPad stopped working. This is not a Fn + F9 issue.
In Device Manager it looks like hidden device and has (!) on it. Re-installing Synaptics drivers, updating them, removing the device in Safe Mode - nothing works. (TouchPad did not work in Safe Mode). One of the forums mentioned BIOS update. For some strange reason the latest BIOS for this specific laptop is from 2008 (ver. 1.5). Other L300 laptops have option to update BIOS to ver. 2.20 (2010) but not mine! I tried to load it (ver. 2.20)from Windows and from boot disk without success. I installed BIOS ver. 1.5. After reboot - keyboard stop working! And TouchPad ... still dead and still appears as hidden device. Using external mouse I restarted the laptop and get into the BIOS settings. In Advanced Settings disabled TouchPad completely. KEYBOARD START WORKING IN WINDOWS!!!
Any suggestions on how to make this TouchPad to work? Or how to get newer BIOS for this Laptop?
Thank you in advance!

Sounds like it has died, you can purchase a new one from a parts supplier and pay someone to install it or if you are any good with such things you can try to do it yourself. I suggest just sticking with the external mouse.
Welcome to the Toshiba user forums.
For those of you who do not know what a user forum is, it is a community of users who volunteer time to help other users. Anyone can participate. It's 100% voluntary.
Being super active is never a requirement

Satellite Pro L300 - using partition magic

Hi,
I have a Toshiba Satellite Pro L300 laptop and I would like to make an additional partition beside the already existing C: and the hidden partition. I have created the recovery discs and I want to use partition magic for the partitioning process (no new installation of windows xp). Can anyone tell me if using partition magic will have unwanted effect on possible recovery from the created disks?
Thank you in advance

Usually you can do this with Windows option in disc management but can you please tell me something at first?
Do you use Vista or WXP? I ask this because if you use preinstalled Vista the HDD must already have two partitions. Please check it out in Windows explorer.
Is hidden partition described as EISA (WinRE) partition?

Satellite Pro L300 - Usage of Power cable between countries

I am in the process of purchasing a Toshiba Satellite Pro L300 T4200 laptop while here in New Zealand, where I will be living for the next six months. However, I head back to Alaska (USA) in April.
Could someone answer my concerns regarding power cable use and which one to purchase once back in the States; mostly is it okay to use a USA power cable in this NZ-purchased laptop without blowing something to bits?
Thx, kim3300

Hi
Since the notebook uses the universal AC adaptor which supports the input voltage between 100V and 240V, you should be able to use the AC adaptor worldwide but it could be possible that you would need an additional adapter for electrical outlet in the wall

No Warranty for LCD Pixel dead for a new Laptop Toshiba Satellite Pro L300-EZ1523

Hey,
I bought a Toshiba Satellite Pro L300-EZ1523 Laptop in Oct 2009. In January 2010 My motherboard went dead so I have sent the laptop to the Toshiba Depot Center initially they said they will repair it and send it within 3 - 5 Business day but they took nearly 15 days to ship it back.
Once I have received there is the big surprise. One of the pixel on my screen is dead and I tired calling the Toshiba customer care at 1-800-457-7777 and the transfer the call to Depot center which takes nearly 40 to 50 mins to get an engineer on the call for which we need so much of patients.
Today I requested to transfer the call to the Case Manager and when I told her about the problem she again tells me to call the depot and file a case with them and the UPS for the damage and she also mentioned that there is no warranty covered for the LCD Screen.
But when I shipped the laptop to the Toshiba Depot I don't had any dead pixels. Im tired calling Toshiba can anyone help me out.
Regards,
Prem.

I got problem with my Toshiba tecra A9 laptop. There is thick black line at the corner of LCD, I contacted 2 toshiba service centers but they paased me to the Toshiba support. They said that Toshiba will not pay us for LCD repair and asked me to call toshiba support and ask for their autorisation. I also called toshiba support several times, but they just make me confused. They said randomly some bizzare phrases: the service centers should aks us for autorisation no., LCD did not coverd by warranty, You made a physical damage, contact another service center, we will contact you within this business day...
The reason I have bought Tecra model was that toshiba called it as bussiness class, and offered a 3 years limited warranty!!! But the warranty is a whole fake to cheat with the clients. They even do not care about business and dont understand how our professional life is depends to our laptop. such a shame for them.
They pay some employees to talk with you several hours, just to deny their warranty and don't give you a good service!
I wonder how they calculate the repaire cost of LCD. I already find wensite which offer the LCD just for 95$. There are lots of replacement guide all over internet. I will suggest toshiba that I can service them for LCD replacement for as low as 150$. That would be a good business for me and a big deal for toshiba! At least Toshiba will not loose their clients.
From my side, I will start to aware all student around me at university to never trust Toshiba quality and warranty services and do not risk their professional life with the toshiba product and services! It seems that Dell is going to be the leader in customer services and hence in future market!

Upgrading my old Satellite Pro L300-1A9 (PSLB 9E)

Similar Messages

Maybe you are looking for