Upgrading my wireless adapter from wireless n-1030 to ultimate-n 6300

Good day!
Is it possible to upgrade my wireless adapter from wireless n-1030 to ultimate-n 6300, my laptop specs are as follows: HP Pavilion DV6-6134TX and the operating system installed Windows 7 64-bit.
This question was solved.
View Solution.

skywalker_08 wrote:
Good day!
Is it possible to upgrade my wireless adapter from wireless n-1030 to ultimate-n 6300, my laptop specs are as follows: HP Pavilion DV6-6134TX and the operating system installed Windows 7 64-bit.
Hi,
Not many laptops support 3 wireless antennas and wireless cards like the Ultimate-N 6300. I have the card myself on Dv6 but it's the 1st generation of the Core i7 processors and also modding the BIOS was necessary to make the card compatible with the laptop. Intel 6150 and 6230 are compatible with the Dv6-6000 Intel based series laptops but the Ultimate-N 6300 not.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Similar Messages

  • Intermittent Connection – New Wireless Adapter Nee...

    Hi everyone,
    I help an elderly neighbour with her laptop and she has started to hit connectivity problems with her existing set-up. She has been with BT broadband for just over one year, using their Hub v2.0.  Although connection problems have happened before, they are getting worse.
    Her laptop is almost seven years old and is running Win XP. She is currently using a NetGear wireless adapter (from the RangeMax range), and it is about five years old. I am guessing that the problem is caused by the hub and the wireless adapter not really 'talking' to each other as nothing else about her set-up has changed.
    So, my question is which wireless adapter could she use instead? If you have had this problem and have resolved it I would really appreciate hearing from you.
    Many thanks.
    Carol
    Solved!
    Go to Solution.

    Carol
    Short answer:
    Try this workaround; despite my own scepticism when first advised about it, this will fix both wifi and ethernet problems; the fact that your HH2 will not connect to your wifi and/or your ethernet connector is related to the HH2’s acknowledged problem with its DHCP table.
    Access the Hub and set your wifi channel to non-automatic and select Channel 11.
    Save the settings and re-boot the HomeHub and your PC.
    Check your performance and that your wifi and/or ethernet connection is working normally, if this works you are OK, if not repeat the cycle and choose, in turn, Channels 9 and 1.
    If your line speed is under-performing, it is now very important let the HH run very specifically for the training period uninterrupted (whether you believe that to be 72 hours, five days or ten days is for you to decide). I stress, do NOT reboot or disconnect the HH during that period to enable the exchange and it to establish the optimum speed for the line (during that period you may observe the HH resetting itself during renegotiation - that is normal).
    Long answer:
    See my post of22 Sept 2011:
    BT Failure & Sanctioned Workaround for HomeHub V 2.0 A
    Good Luck
    +++###+++
    If you feel the problem is solved, please don't forget to come back and confrm the fix or post any other solution. It helps those who really need it to judge whether it works or not.
    Also, mark the thread solved

  • Upgrade to kernel 2.6.26.2-1 and my ralink-based wireless adapter

    The latest upgrades (kernel26, rt2500, etc.) are causing me major problems with my wireless adapter.  It's a junky Belkin model which uses the rt73usb driver (part of the rt2500 package, I believe).  Anyway, after the upgrade, if/iwconfig returns no wlan0 interface.  Modprobing the rt73usb driver doesn't help.  I also see a blur of ugly looking text at bootup that seems to relate to my USB hub - but that's probably an unrelated issue.
    Is anyone else having problems?
    EDIT: This should probably be moved to Kernel & Hardware Issues.  I'm acting stupid today...
    Last edited by cardinals_fan (2008-08-11 21:07:01)

    I've had issues with rt73usb after upgrading to 2.6.26, too. The kernel even oopsed when plugging the adapter in (you might refer to it by writing "a blur of ugly looking text" ).
    I'm currently testing a small patch borrowed from the Ubuntu guys and it does the trick so far. See here:
    https://bugs.launchpad.net/ubuntu/+sour … bug/249242 (bug report)
    https://launchpad.net/ubuntu/intrepid/+ … .6.26-5.14 (patch file)
    The portion fixing it for me is this:
    --- linux-2.6.26.orig/drivers/net/wireless/rt2x00/rt2x00dev.c
    +++ linux-2.6.26/drivers/net/wireless/rt2x00/rt2x00dev.c
    @@ -1198,8 +1198,10 @@
    * Stop all queued work. Note that most tasks will already be halted
    * during rt2x00lib_disable_radio() and rt2x00lib_uninitialize().
    - flush_workqueue(rt2x00dev->workqueue);
    - destroy_workqueue(rt2x00dev->workqueue);
    + if (rt2x00dev->workqueue) {
    + flush_workqueue(rt2x00dev->workqueue);
    + destroy_workqueue(rt2x00dev->workqueue);
    + }
    * Free ieee80211_hw memory.
    Best,
    Christian
    Last edited by krist (2008-08-12 23:24:26)

  • What is the best bluetooth adapter from a mac to a printer that is not wireless?

    what is the best bluetooth adapter from a mac to a printer that is not wireless?  Using a Canon Pixma 850

    How to burn MTS to DVD on Mac OSX:
    http://www.iskysoft.com/create-dvd/mts-to-dvd-mac.html

  • How to upgrade firmware on 7921g wireless phone from 1.0.2 to 1.0.4 via USB

    how to upgrade firmware on 7921g wireless phone from 1.0.2 to 1.0.4 via USB?
    The 7921g is connected via USB to a PC. I am using a browser to access the phone. Documentation says "Click the Phone Upgrade hyperlink under SYSTEM options. " but that option is not present or not visible.

    You can use the Phone Upgrade area on the web page to upgrade firmware files on the phones by using the USB connection or by using the WLAN. To upgrade the phone software, enter the phone software TAR (firmware file name) or use the Browse button to locate the firmware file on the network.
    To display the Phone Upgrade area, access the web page for the phone as described in the Accessing the Configuration Web Page for a Phone section available at http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/5_0_1/english/administration/guide/21adm50.pdf

  • Airport Extreme won't accept password request from DirecTV wireless adapter

    My Airport Utility is running on PC (Windows XP). The DirecTV wireless adapter "sees" the network, and I get to the password screen but it can't get the password approved by Airport. Anyone know a fix?
    I've already updated Firmwear, rebooted everything, etc. Other wireless things working fine including new setups, so it's not the router unless I need to change some settings
    Thanks, Marty

    wyhoser, Welcome to the discussion area!
    Are you by chance using WPA or WPA2?
    WPA: You can use WPA if you upgrade your iBook G3 to OS 10.3. See KB 107795, AirPort Card: When You Can Join a WPA Network.
    WPA2: Sorry, but the iBook G3 can not join a WPA2 protected network. You will need to drop back to WPA or WEP.

  • Wireless adapter upgrade

    Im looking to upgrade my wireless adapter to a dual band with bluetooth included. is there a link or a list of compatible adapters for my laptop? Thanks!
    my product code is: C2H74UAR

    Here is the Manual:
    Manual
    See pages 28-29. The Intel 6230 is misidentified in this list and that part number is actually something else. Your laptop is one of the last to have had the whitelist where only specific HP Part No. wifi cards can get past a boot block in the BIOS. There is no 5ghz dual band option for your laptop I hate to say.

  • Boot from LAN using Wireless Adapter

    I have one Cisco Wireless PCI Adapter. Does it have a feature like PXE BootROM in NIC, so I can boot from LAN using wireless adapter?

    I'm pretty sure it doesn't. At issue would be the necessary setup for things like SSID.
    Maybe in the future; many motherboards & chipsets are including Wireless NICs, they would need to provide some setup in the BIOS to configure the basic communication parameters necessary to establish the Layer one / Layer two link.
    Good Luck
    Scott

  • Upgrade my DV6-6126sl with an Wireless adapter Bluetooth

    Hi,
    I open a new topic, because searching among existing ones, I did not find useful answers.
    I have a DV6-6126sl and I decided to upgrade it with a wireless card that implements the Bluetooth. analyzing the service and maintenance guide, I chose to buy the part number 657325-001, which should be compatible with both AMD and those models intel, but when I insert the card at startup hangs and does not post bios, giving an error "wireless adapter installed is not supported and then has the error" wireless (702) "," how is it possible? there is a method to unlock it, thanks
    Knowledge is power, sharing knowledge is powerful!
    HP DV6-6126sl:AMD A8-3510MX, 16Gb (2x8Gb) DDR3 1600 Corsair Vengeance, SSD Samsung 840 pro 256Gb + ST950042 0AS 500Gb 7200rpm, AMD Radeon HD 6755G2 1Gb DDR5

    Today, the seller has sent to me an email that says: "I have the Ralink RT3090BC4 802.11b/g/n 1 × 1 WiFi and Bluetooth 2.1 + EDR Combo Adapter 630705-001".
    According to you, since the manual is listed as "For use on all computer models:" can I try?
    Knowledge is power, sharing knowledge is powerful!
    HP DV6-6126sl:AMD A8-3510MX, 16Gb (2x8Gb) DDR3 1600 Corsair Vengeance, SSD Samsung 840 pro 256Gb + ST950042 0AS 500Gb 7200rpm, AMD Radeon HD 6755G2 1Gb DDR5

  • Can I get a wireless adapter for my computer then wire my Xbox from that?

    Hi everyone. I live in an apartment next door to my shop and we have internet there so i hooked up a wireless when I moved in so I wouldnt have to put internet in my apt to. I get signal because the building isnt that far away but it is alittle weak. I want to get a wireless adapter for the computer but i was wondering if i could get one that my xbox will connect to. Can you guys give me some advice.

    Hi you can get wireless adapter WUSB300N for the desktop or WPC300N for the laptop.Both, work great with the wireless router WRT300N.I advice you to open setup page of router using 192.168.1.1 for doing the wireless settings where the wide channel set to 20 MHZ frequency & standard channel set it to 11.Also, if you wnat to enable wireless security make sure you choose WPA as it works great with the N - series linksys products ie., with the WRT300N router & N - series adapters.

  • Is it worth the money upgrading from Wireless-G to Wireless-N?

    I have a Linksys Wireless-G router, and I'm think about getting a Linksys Wireless-N router. My notebook supports Wireless-N. Is it worth the money? What are the advantages of Wireless-N over Wireless-G? Thanks!

    I just bought a N router since my notebook has a N card and unless I'm in the same room, I cant get more than 700kbs download which is not good.
    I switch it to G however and its full speed anywhere in the house with great range. This is the second N router btw from 2 different makers and they both did the same thing. 
    (Edited post for guideline compliance. Thanks!)
    Message Edited by JOHNDOE_06 on 10-12-2008 11:57 AM

  • Xbox 360 wireless adapter wont connect to Airport Express/cant find ip

    i have a time warner modem with the ethernet cable plugged into my airport express to create a wireless network in my house. my macbook and dell connect with no prob.
    the xb recognizes the airport express, shows it as connected with green bars, but when i try to log into xbox online, it says that there is no connection.
    i can plug in the ethernet cable from the xb to the airport ex and there is no problem. only when trying to use the wireless adapter.
    how can i stop this? also, how can i find my IP address?
    since the xb wouldnt connect and find my ip automatically, i tried to do it manually. when i go to terminal on my macbook and enter "ipconfig e0", i dont see an IP address.
    i have seen a lot of info on this but it mainly deals with airport extreme or those who are trying to connect to airport express with an ethernet cable.
    so if you can help me troubleshoot the wireless connection between my xb and my airport ex OR explain how i can find my IP address, i would be very grateful.
    FYI---the airport express was purchased in april, so i believe it is the new "n" model.
    thanks for all your help.

    Gary Sanborn, please share your tricks. I'm curious to know how you got it to work. I used to have the old Express and that worked just fine. The new version (n) doesn't seem to connect to xbox live. As previously stated, mine also shows "connected" and a strong green bar signal on the xbox but the text can't get passed "connected to live"... if I'm not mistaken.
    I heard about holding down the option button white selected the type of wireless connection and connecting to wireless b only. I would want to avoid this option. I don't want my express to run that slow. Please advice. Thanks in advance.
    By the way, I haven't tried it since recently upgrading to OS X 10.5.3. I wasn't sure if that affected airport's connectivity with xbox 360.
    Message was edited by: Gino Zevallos

  • WRT300N Router does not working with Intel 4965AGN adapter on Wireless-N

    Hi! I have recently bought the laptop Acer 5920G with Intel 4965AGN network adapter and Windows Vista. I have read that WRT300N Router is supporting Draft-N standard, so I purchased it. The router is working fine on Wireless-G 54Mbps (firmware - 2.00.17), but not on Wireless-N. I tried to enter the following settings: ssid - any non-linksys name;  radio band - wide; n-channel - 9; standard channel - 11; beacon interval - 50; Fragmentation threshold - 2306; RTS threshold - 2307, but nothing has happened, connection still remains 54Mbps. How should I configure the router and network adapter to get Wireless-N?

    okay... try reflashing/upgrading the firmware on the router, after reflashing the firmware on the router, reset it back to default settings and reconfigure it according to ISP settings...edit the wireless settings again, make sure that "wireless mode" should be mixed...
    on the vista computer, click on start >> control panel >> network & sharing center >> manage wireless network and try removing existing wireless networks from profile and manually add wireless n/w profile according to wireless settings of the router...check whether it makes any difference or not and let me know.

  • Linksys Smart Wi-Fi Device List Not Finding Windows 8 Wireless Adapter

    I recently upgraded my Wi-Fi router to an EA3500 and am controlling it using Smart Wi-Fi running on a wired Windows 7 machine.
    So far, I have been able to add devices to the network without issue and each of those connections works fine.  All, except my TV, have been Windows 7 based machines.  Smart Wi-Fi Device List has been able to "see" each device and I have been able to add them to that list as well.
    I am attempting to add a Windows 8 desktop computer to the network which is using a external USB wireless adapter.  That computer can see and connect to the network through the EA3500 and the connection seems to work fine.  The only issue is that its adapter does not show up in the Device List.
    My questions:
    1)  Does the Device List do anything else besides showing a list of devices I chosen to add to my network?
    2) How do I get my Windows 8 wireless adapter to show up in the Device List?
    Thanks In Adance! 
    Solved!
    Go to Solution.

    MAC devotee wrote:
    I would like to chime in here too. I also have the same issue as described on an older Mac desktop. The ethernet port has failed so it connects only via the AirPort wireless. My issue is IMPORTANT because until this devices shows up on the Device List I cannot apply the Parental Controls. Joining Orloldman for an answer... (Thanks!)
    Try the following:
    1.       Disconnect the computer from the wireless network
    2.       Remove wireless network profile on your computer
    3.       Reboot the computer and power cycle the router
    4.       Reconnect to the wireless network
    5.       Check if the computer shows up on the device list.
    If it is still not showing, reset and reconfigure the wireless router.

  • Wireless adapter lost after Windows 7 update - HP Pavillion DV6-6160sl

    I did an upgrade of windows 7 and then suddenly the wireless adapter has disappeared.
    The activation button does not work anymore and the adapter is no longer visible
    in the list of PC devices.
    Does anybody know how to reinstall this device, how to see the card again to the operating system?
    Thanks to everyone.
    Sorry for my google english
    Marco from Florence, Italy

    Thank you for your help.
    I tried the procedure three times.
    But no results.
    I can not do find to the PC the wireless adapter.

Maybe you are looking for