Upgrading my X301 to Windows 7

I have decided to upgrade my Lenovo ThinkPad X301 to Windows 7 Ultimate Edition.
I want a new/clean installation and have saved all my files & folders to a USB HDD. The question is, shall I now run the ThinkVantage rescue & recovery console and then run the Windows 7 upgrade from there of shall I just format the HDD and install Windows 7 on a new partition?
Many thanks for your anticipated help!
Iain

Struggled with this for many, many hours. A combination of people's tips got me to my solution:
1) Go to CONTROL PANELS -> DEVICES AND PRINTERS and remove the printer.
2) Download the new Windows 7 driver from the HP site (version 13 released on January 15).
3) Install the driver (I installed the HP OFFICEJET PRO BASIC DRIVER).
4) After the driver is installed, go to CONTROL PANELS -> DEVICES AND PRINTERS and double-click on the K8600 printer.
5) Double-click on the "Customize your printer" option.
6) Choose the "Advanced tab".
7) Click on the "Print Processor" button.
8) Choose the "winprint" print processor option (I left the Default data type as "RAW").
That fixed the problem for me!
Thanks for everyone's help on this forum!

Similar Messages

How can I perform an "in-place upgrade" on an unbootable Windows 7 machine or at least rebuild Safe Mode?

Some strange glitch has erased every single unlocked & unprotected file on my C: drive. It wasn't a virus because I checked autorun records and running processes using the respective Sysinternals utilities and didn't find anything suspicious.
I restored all data except for some system files and files that had "too long" of a path using shadow copies, which luckily for me were just a few hours old. Then, I decided to reboot into Recovery Environment and run System Restore from there. For even
more strange reason, the available restore points in RE were dated November 2010 (it's May 2012 right now) and the recent save dates are nowhere to be found.
To make matters worse, SFC doesn't work and Safe Mode shows BSOD after loading CLASSPNP.SYS.
Error messages so far:
RE's startup repair tool: System files integrity check and repair error code 0x2
SFC: Windows Resource Protection could not perform the requested operation
BSOD: 0x7B (0xFFFFF880009A9928, 0XFFFFFFFFC0000034, 0x0, 0x0), but the HDD is perfectly fine - it's a dual-boot machine
CBS.log: Failed to get CSI store. [HRESULT = 0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
What I need is a way to perform either an in-place upgrade without booting into Windows, or a way to fix the SXS Component Store, or rebuild the Safe Mode so that I could initiate upgrade install from there. A clean install isn't an option because I don't
have the luxury of time to run through the reboot cycles when re-installing and updating other software (I'm using Windows 8 CP for now as my work tools are mostly in the cloud).

"Den B" wrote in message news:9528356a-7e8f-45bf-9eee-30b40b5df4aa...
Some strange glitch has erased every single unlocked & unprotected file on my C: drive. It wasn't a virus because I checked autorun records and running processes using the respective Sysinternals utilities and didn't find anything suspicious.
I restored all data except for some system files and files that had "too long" of a path using shadow copies, which luckily for me were just a few hours old. Then, I decided to reboot into Recovery Environment and run System Restore from there. For even
more strange reason, the available restore points in RE were dated November 2010 (it's May 2012 right now) and the recent save dates are nowhere to be found.
To make matters worse, SFC doesn't work and Safe Mode shows BSOD after loading CLASSPNP.SYS.
Error messages so far:
RE's startup repair tool: System files integrity check and repair error code 0x2
SFC: Windows Resource Protection could not perform the requested operation
BSOD: 0x7B (0xFFFFF880009A9928, 0XFFFFFFFFC0000034, 0x0, 0x0), but the HDD is perfectly fine - it's a dual-boot machine
CBS.log: Failed to get CSI store. [HRESULT = 0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
What I need is a way to perform either an in-place upgrade without booting into Windows, or a way to fix the SXS Component Store, or rebuild the Safe Mode so that I could initiate upgrade install from there. A clean install isn't an option because I don't
have the luxury of time to run through the reboot cycles when re-installing and updating other software (I'm using Windows 8 CP for now as my work tools are mostly in the cloud).
It is not possible to do a repair install of a system unless you can boot to the system.
Have you checked the hard drive for problems? - download the manufacturer's test utility, create the disk, and run the extended checks.
Noel Paton | Nil Carborundum Illegitemi |
CrashFixPC | The Three-toed Sloth

I upgraded my computer to Windows 7 and now I tunes is empty and when I try to sync my Iphone4 or IPod, it states they belong to another ITunes Library. How do I sync all my content, including Apps to my computer again or get my old Itunes library back?

To all:
I recently upgraded my computer from Windows XP to Windows 7. Now my Itunes library is no longer available? When I try to sync my IPod or Iphone 4 to ITunes, it states that the content on my devices belong to another Itunes Library and do I want to transfer purchases, erase etc?
How do I get my old Itunes Library back? Some of my music are from CD's I own and really don't want to start the years of building my Itunes library all over again?
How do I bring all the contents: contacts, music, apps etc from my Iphone4 back to Itunes?
Confused.

The ipod/iphone/ipad are not backup sotrage devices.
Certainly you did not upgrade your computer without making sure that your backup copy of your computer was up to date. Just use your backup copy of your computer to put everything back.

Upgrading my PC from windows 8.0 to 8.1, I accepted to use Skydrive as Cloud. Now I have lost my ICloud calendar sync with my iphone and iPad which appears no more in Outlook. I can access calendar on my PC through iCloud app but not printable. HELP!

My iphone and ipad are stil synchronized but Calendar does not sync with Outlook since I upgraded the PC to windows 8.1
You may answer in English, Italian or French...
Thanks for Help!!!

All I had to do was complain. I synced my iPhone to the Windows machine, checked the other account at iTunes prompting (where no apps had shown up previously), reconnected the iPad, and 140 apps downloaded including the App Store. I have no idea why.

Upgrade of Integation Services (Windows 2012 R2) on Windows 2008 R2 with Exchange 2013 SP1 DAG fails

Here is the scenario:
Legacy Host: Windows 2008 R2
Guest VM: Windows 2008 R2 with Exchange 2013 SP1 DAG cluster.
After importing the VM (2008 R2 and Exchange 2013 DAG) into a 2012 R2 host (Cluster). (copy VM files to new 2012 R2host) Everything works fine.
Then upgrading "Installation Services" (for Windows 2012 R2 host) on the imported VM runs fine with no errors to the "Restart" prompt. VM than shows: "Configuring Windows updates 32% complete. Do not turn
of your computer." Hangs there for about 20 minutes until is says "shutting down". Hangs there for 20 minutes until power off. Restart to normal start; "Preparing to configure Windows. Do not turnoff your computer." proceeds slowly
to "Configuring Windows updates 32% complete. Do not turn of your computer." hangs there again indefinite. Sometime hangs at shutdown cycle and "Configuring Windows updates 32% complete. Do not turn of your computer." indefinitely.
I moved 20 other machines from a 2008 R2 host to new Windows 2012 R2 hosts all of these machines install the 2012 R2 Integration services just fine on the 2008 R2 VM. Just the 2008 R2 VMs clustered (DAG) and Exchange 2013 SP1 do not take the Integration
Services upgrade.
Any advise from Microsoft? I know I could decommission the DAG and Exchange machines and install Integration services on the native box before Exchange and DAG and that would sure work, but I'd rather avoid that amount of work for a simple integration layer
upgrade.
Thanks
Gerhard Waterkamp ACSLA Inc.

Hi,
Could you try use the following method to fix this issue first?
1. Run the System Update Readiness Tool, then check if there is any error in the Checksur.log and checksur.persist.log.
1. Please run the System Update Readiness Tool on this affected server. Please download this tool from the following Microsoft article:
Description of the System Update Readiness Tool for Windows Vista, for Windows Server 2008, and for Windows 7
http://support.microsoft.com/kb/947821/en-us
2. The System Update Readiness Tool creates the log files that captures any issues that the tool found or fixed. The log files are located at the following location:
%SYSTEMROOT%\Logs\CBS\
3. Please paste the checksur.log here for analysis.
If there is no error found, please try the following step.
==================================
2. Use Fix it tool to reset the Windows Update components.
1. Open the following link.
http://support.microsoft.com/kb/971058/en-nz
2. Select Windows 8.1, Windows 8 and Windows 7 in the product selection box.
3. Click “Run Now” to reset the Windows Update components.
Note: We can reset the Windows Updates manually by following the steps in the KB above.
3. Use the System File Checker tool to repair missing or corrupted system files
1. Open the command promote with Administrators.
2. At the command prompt, type the following command, and then press ENTER:
sfc /scannow
Any errors are found in the steps above, please let me know.
Hope this helpful.
Best Regards,
Jason Zeng
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

I currently have an old version of Photoshop Elements, it is version 5.0. I recently upgraded from my old Windows XP computer to a new Windows 7 computer. My question is: Can I install this version 5.0 on my new windows 7 computer without any problems?

I currently have an old version of Photoshop Elements, it is version 5.0. I recently upgraded from my old Windows XP computer to a new Windows 7 computer. My question is: Can I install this version 5.0 on my new Windows 7 computer without any problems? my email is: [email protected] Thank you!

Do not know about 5, but, just installed PE 6 on I7 64 bit and it works.

How to upgrade my Skype in windows 7

How can I upgrade my Skype in windows 7

Windows Firewall won't block installations. You can use group policy, check out Using Software Restriction Policies to Protect Against Unauthorized Software
As well, as a security best practice users who should not be allowed to install applications should not be members of the Power Users or Administrators local machine groups. As members only of the Users local machine group they do not have permission to
install applications.
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

No Sound Devises Detected on my Laptop after an Upgrade from Vista to Windows 7 !

I own a hp dv9720us laptop. I upgraded from vista to windows 7, and have lost all sound. I've tried about everything , but nothing worked. hp 's site say they no longer support driver updates , since 2010. Can anyone help me , Please ?
JIM

Hi,
Have you checked this ?
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/General-Windows-7-Upgrade-Guide-for-HP-L...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP not honoring free upgrade from Vista to Windows 7

When I purchased my machine in February 09 with Vista home edition I was promised on the web site and by the sales clerk that I would receive a free upgrade to Windows 7. Now I am told that only machines purchased after June 09 will qualify. I am furious and will not settle for this. Does anyone else have this issue.

Look you might have understood them wrong or you're saying something that they didn't say. They might have told you that there is going to be a free upgrade program for Windows 7 closer to when Windows 7 launches and thought you could get it when you bought it or you just want to accuse HP that they said that you would have the W7 Upgrade for free so you can get the upgrade. You should have looked for an official confirmation from Microsoft for the free upgrade from vista to W7, http://windowsteamblog.com/blogs/windows7/archive/2009/06/25/announcing-the-windows-7-upgrade-option-program-amp-windows-7-pricing-bring-on-ga.aspx This link was released on June 25, 2009 and officially says that the free upgrade program was going to start on June 26, 2009 and this is directly form the Windows Blog. You made a mistake of listening to people and not looking for the official Microsoft Announcement. Your out of luck. Microsoft did this with xp to vista when vista came out and it was around the same months as vista to W7, so you should have also looked for past free upgrade. On February, Windows 7 date hasn't even been announced and the beta was still in progress as posted here on February 2009 http://windowsteamblog.com/blogs/windows7/archive/2009/01/23/general-availability-for-the-windows-7-beta-to-end.aspx So this goes back to the top, you should have looked at past free upgrades like xp to vista to check how many months before they will start the free upgrade program.
Message Edited by lmanlo on 10-12-2009 09:39 PM

Satellite P200-17C - Upgrade from Vista to Windows 7

Am looking to upgrade from Vista to Windows 7, anybody done this? And was thier any problems with drivers etc?
Thanks

Hi
I dont know what you want to hear now exactly but you can download all drivers here:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
As far as I know this P200 model belongs to the PSPB6 series.
Therefore it seems that all drivers available for Windows 7 32bit.
Generally about Vista and Windows 7 I can say that new OS runs much faster and never had a problem as yet. I can recommend it! :)

How to upgrade from Vista to Windows 7?

I recently bought the upgrade version of Windows 7 utimate for my laptop, my laptop is new and Windows Vista pre-installed. I would like to know if I upgrade Windows 7 from this "Fresh", pre-installed vista, would this Windows 7 operate as good as the clean installed Windows 7?
I am not very clear how Vista upgrades to Windows 7, do Windows 7 upgrades based on the old Vista system? Or it will install a clean and new Windows 7 then only copy all the settings and programmes from old Vista?

Hi
Can you please tell us what Toshiba notebook you have exactly and what Vista version you have exactly (Home, Business, etc. and 32bit/64bit)?
Theoretically you can upgrade from Vista to Windows 7 but it must be same version. That means its only possible to upgrade from 32bit to 32bit and 64bit to 64bit.
If you want to upgrade you have to insert this disc and follow the screen instructions, thats all.

Upgrade from vista to windows 7 home premium

I want to upgrade from vista to windows home premium but I'm told I need to find out if my computer can actually support windows 7. Can someone tell me how do I find out if my computer is able to be upgraded to windows 7? I have an hp pavilion with a 32 bit operating system, the model number is a6207c. Thank you

Ok, I tried this and it said I needed to download and install Nvidia graphics driver version 309.08, I downloaded and installed this version just fine. I done option 2 again and now it says download and install version 353.30. I download this version but got an error when I tried to install it that says THIS GRAPHICS DRIVER COULD NOT FIND COMPATIBLE GRAPHICS HARDWARE. Do you know what I should do now to fix this?

I have a early 2011 MacBook Pro upgraded to mavericks and windows 7 install cd what do I need to install bootcamp properly?

I have a early 2011 MacBook Pro upgraded to mavericks and windows 7 install cd what do I need to install bootcamp properly? I have the bootcamp assistant in my utilities folder but do I need an older version it's the 5. Something from mavericks and which drivers do I need my my computer?

Boot Camp Assistant is already installed.
Boot Camp 5.1- Frequently asked questions
Mac Basics- Using Windows on your Mac with Boot Camp
Boot Camp- Frequently asked questions about installing Windows 8
Boot Camp- Installing Windows 7 Frequently Asked Questions

I have Adobe CS. Upgraded my computer to Windows 7. Installed CS but I can't activate Photoshop due to the online/phone activation being pulled down. Now the 30 days has expired. Tried to follow directions to install CS2 but no luck. I would really like t

I have Adobe CS. Upgraded my computer to Windows 7. Installed CS but I can't activate Photoshop due to the online/phone activation being pulled down. Now the 30 days has expired. Tried to follow directions to install CS2 but no luck. I would really like to speak with someone at Adobe to get it working again. THanks

If you would like to speak with someone at Adobe you will need to cvontact them directly by chat or phone.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/

I have Adobe Acrobat 9 Standard Serial No. and would like to upgrade to the Microsoft Windows 8 and the Office Professional Edition 2013.

I have Adobe Acrobat 9 Standard [serial number removed by moderator] and would like to upgrade to the Microsoft Windows 8 and the Office Professional Edition 2013.

Hi w james,
As you mentioned that you are upgrading your Operating System to Windows 8 and MS Office to MS Office Professional 2013, please note that Adobe Acrobat 9 is not compatible with Windows 8 and MS Office 2013. You need to upgrade to Adobe Acrobat XI as it is fully compatible with Windows 8 and MS Office 2013.
For more information, please refer:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
http://www.adobe.com/products/acrobatpro/tech-specs.html

Upgrading my X301 to Windows 7

Similar Messages

Maybe you are looking for