Upgrading N80 is a nightmare! How do I now backup ...
Hi, basically i've been trying to upgrade my N80 for the past 2 days and it's not an happy ending story! First, the N80 would not backup to my memory card (2GB). Googled few sites, then I gave up and backed up using PCsuite. Then, I started the upgrade using Nokia software Updater. Needless to say that the updater as well was not reliable... Anyway, after 4 attempts and 2 installations on my computer the phone was finally upgraded to the new firmware... After the upgrade I tried to put back my backup but if failed miserably! The backup seemed to fail when installing some application. So, i went and installed all the application manually. After that, i tried to push again my backup to the phone withouht luck. Fortunately, I was able to put back contacts and calendar entries using the synch. However, I lost several applications (VPN, my Mailbox in messages, Python, and other application which i didn't not down). Now my question is: How can I put back my backup to my phone? And why the backup manager found so many error and failed to put back all the software i installed? Thanks in advance for any answer.
Regards, RedaMessage Edited by orinoco on 06-Nov-2006
12:52 PM
Use PC Suite only for Contacts backup. Full backup/restore (including SD) and Phone Memory backup right only for the SAME firmware. Before firmware update backup contacts to PC, then format SD and remove it, then reset (not obligatory) phone to factory settings. Charge battery full.
Clean Windows (antivirus, check errors, defrag etc.).
Use UPS for desktop (notebook - is the best choice).
Clean Phone and Cable terminals from dust and oxides (rubber is good .
Run NSU (if at home and not afraid , connect phone. wait finishing update (some phases may be very long, and some time it may seems that phone hang or died - don't touch it, wait and be patient .
After finishing and first turning ON insert SD, connect to PC Suite, restore contact (don't forget temporary change direction Contacts Update - if need . Reinstall sortware (Opera, ProfiMail or other). Enjoy.
This is the only reliable method
Similar Messages
-
I upgraded my iMac to 10.9.4. Now the feature where you can go to 4 diff. screens (Command+Control) doesn't work.
How do I fix this?Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes] -
I upgraded my 4s to 7.0.4 and now I can't acicess hotmail through my main mail app. When I open it a pop up says password incorrect even after I put my password in it pops up again. How do I fix this please help
After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
b0n0b0
Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
Mar 15, 2014 9:05 AM (in response to Terence Devlin)
Got it! Thanx. What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed. -
I am thinking about upgrading to PSE 13. How many computers can you install it on? I have a desktop at work and a desktop and laptop at home. I would like to install it on all three.
duplicate post, see:
Elements 13 questions (was P/) -
I just upgraded to the new mobile me calendar and now all my calendar entries on iCal have been erased. As I type this the calendar entries are still on the mobile me and iphone calendars. How do I restore the calendar entries to iCal?
Please always post your System details when you have a query. The upgrade to the new MobileMe calendar produces different results, and different problems, with different versions of OSX.
Snow Leopard: during the upgrade process your iCal calendars should be moved to MobileMe (this can take some time and you have to wait for it to happen). Once done, your iCal reads the calendars from MobileMe so any changes made in either place will be visible immediately. If this has not happened then this Apple Tech Note provides instructions:
http://support.apple.com/kb/TS3397
Leopard: when the upgrade is completed iCal on Leopard will not be able to see the MobileMe calendars until an additional process is carried out, detailed in this Apple Tech Note:
http://support.apple.com/kb/HT4330
Tiger: iCal on Tiger cannot read the MobileMe calendars, period. The only workaround is to upgrade to Leopard, or Snow Leopard if possible (Intel Mac required). -
I just purchased a Power Mac PC G4. The system has OS Tiger 10.4.11. I would like to upgrade it to Lion.
How can I do It?
Thank You
HubertPPC (PowerPC) is the processor architecture of all G3, G4 and G5 Power Mac computers.
PPC Macs cannot run any OS greater than Leopard, 10.5.8 because after that, Apple quit developing for PPC processors and limited support for the Intel processor line only.
As for upgrade to Leopard, Yes, if your machine meets the minimum requirements of 867 MHz or faster processor, 512 MB or greater of RAM and has a DVD reader it can have Leopard installed.
To install Leopard, one must first purchase a RETAIL (black with X on it) disc.
After install of 10.5, 10.5.1,10.5.4 or 10.5.6 retail version, free updates to 10.5.8 are available from Apple.
Check eBay for discs:
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
If your machine is slower than 867 MHz, Google "Unsupported Leopard Installation".
Tiger is lthe best choice for slower PPC Macs. -
Can anyone offer some advice i am looking to upgrade the OS system on one of my macbook pro's, currently running os10.4.11, I would like to upgrade to OS10.5? how would I go about this, and is there a cost, for what is an old operating system now?
Since your Mac probably came with 10.4, there is no longer a way to get 10.5 Leopard install media. IF it has the requirements, you may be able to upgrade to 10.6 Snow Leopard by buying the boxed install media at the Apple Store for $30.
System requirements are found here: http://support.apple.com/kb/SP575
General support can be found here: http://www.apple.com/support/snowleopard/ -
Have MacBook Pro (ancient) has
2.16 Ghz Intel Core Duo with
1 GB 667 MHz RAM
using OS 10.4.11.
Can I upgrade OS? If so, how far?
And can I add more memory?
I realize this is an old laptop but I need to wait to upgrade to new.if it is the core duo, mac OS X 10.6.8., max ram 2gb.
-
I have an HP Printer/scanner, and since upgrading to Mountain Lion I can no longer scan on my HP. HP tells me that I can get an upgrade app from 'Apple Software Upgrade' . Does anyone know how to do this?
HP couldn't find its own apps with both hands and a flashlight.
As of Lion all scanning functions are incorporated natively in OS X. You can scan three ways:
Use Preview: File > Import from scanner
Use Image Capture
(Preview and Image Capture are both in your Applications folder.)
System Preferences > Print & Scan. Select your HP and use the Scan tab.
If you have HP's "Image Zone" software installed, you no longer need it and it no longer works anyway. -
I just upgraded to the iOS 5 and icloud, but now all my pictures are gone! How do I get them back?
I have an iphone and just upgraded to the iOS 5 and icloud, but now all my pictures are gone! How do I get them back?? It's weird because it said with the upgrade your photos would be kept, but apps would be erased, yet my apps synced over and not my pictures...
I have EXACTLY the same issue. I would appreciate the response also. Was not prepared for this.
-
I have a rather old iMac 20" (mid 2007) and I want to upgrade the Hard drive. How do I change it? How do I transfer all my applications? May I just copy the old hd into the new one? Thanks.
There are many online tutorials on how to change out the HD on a mid 2007 iMac. One of the originals is from 2007 and is Upgrade your iMac 20" or iMac 24" aluminum (mid 2007) to 1TB Hard Drive and 4 GB RAM - DIY Guide. As far as migrating your system Apple helps out with that in Setup Assistant which automatically starts when you turn on a new Mac for the first time. After you have installed the new HD you will have to format the new HD to Mac OS Extended (Journaled) and then you will have to install OS X. The first time you turn it on Setup Assistant will start. Follow the directions and you will be fine. In order to restore your information you will need to backup what is on the current internal HD first. I'd recommend using Time Machine (Assuming you are using Leopard or later) AND also creating a bootable clone using either SuperDuper or Carbon Copy Cloner.
Please complete your profile so at the very least we know what version of OS X your machine has installed. -
I have an iPhone 4s and i want to upgrade to the 5. How much does it cost to upgrade through an apple store while holding an existing plan with optus?
Type "apple mobile device service" into the search bar at the top of this page aby "Support" and read the resulting help articles.
-
I want to upgrade my mac os 10.6.8 to 10.8.2 , will this erase all my files,apps,etc ? and will i loose the licence of microsoft office 2011, how to make a backup on a pendrive ? I have files of approx 180 gb , THANK YOU !!
Forget the Pendrive stategy...
Before attempting any Major Upgrade... get yourself an External Hard Drive... and create a Bootable Clone Backup of your current Hard Drive...
By far the easiest way to make such a Backup, is to use something like
SuperDuper http://www.shirt-pocket.com/
or CCC http://www.bombich.com/
That way, should anything untoward happen during the Upgrade,
you will NOT LOSE ANYTHING.
(Get an EHD that is at least equal to your current Drive...)
Also, Check here for compatibility of 3rd party Software you may be using...
http://roaringapps.com/apps:table
You should also consider more RAM... Get the Maximum you can for your Mac...
It is important to get the Correct and Matching RAM
See Here > OWC RAM > http://www.macsales.com -
Just upgraded my system to snow leopard...now when I open documents from my memory stick, its in 'pages' not word...how do I fix that??
Did you click on the little triangle? Did you select one of the document files before pressing COMMAND-I to open the Get Info window? If the panel is closed it looks like this:
If you then click on that little triangle gadget you get this:
A temporary solution is to CTRL- or RIGHT-click on the document file, navigate to the Open With item, and select from the sub-menu.
The first method makes the association permanent. This method only applies to the currently selected document. -
I have a 13-inch MacBook Mid-2009 running on IOS X Lion and am trying to upgrade to Mavericks but after the download and starting installation the point where you choose which disk to use it says my hard drive is being used for Time Machine backups so it can not be used. I have turned off the Time Machine but do not know how to remove the backups from the hard drive. What do I do to get rid of the Time Machine backups I no longer actually need and install Mavericks? I have moved all my files to a separate terabyte hard drive but that drive does not have the GUID partition scheme to be used for installation. So I am stuck with one internal hard drive I cant use due to Time Machine and an external hard drive I cant use due to this GUID partition problem. How can I work around this and finally upgrade to Mavericks?
Click here and follow the instructions.
(116122)
Maybe you are looking for
-
I have a Macbook Pro and when I plug my USB in, it doesn't show up on my desktop or in my finder. I read where i should have a "devises" tap on the sidebar of the finder menu, but I don't. I think I've accidentally made it to where its hidden somehow
-
I purchased a Hyundai Elantra. My IPod will not load. Trying my son's Ipod, that one loaded. The cable and the automobile software do not seem to be the problem. Someone suggested that I need to update my firmware but I do not know the steps in g
-
Service PO - Invoice verification before Service Entry / Acceptance
Hi SAP Gurus , I have following question , I am creating a Service PO with A/c assignment category K & Item category D . system automatically proposes GR Based IV tick for this combination . I want to post the invoice first & then do the service entr
-
when i press type lov in invoice line appear item freight miscellaneous withholding i want to add another type like custom - bank charges .... and so on how can i add these types.
-
Runtime error SAPSQL_CURSOR_ALREADY_OPEN during extraction - 0CO_OM_CCA_9
Greetings, I'm getting the following runtime error: SAPSQL_CURSOR_ALREADY_OPEN during extraction of infoSource: 0CO_OM_CCA_9. Runtime Errors SAPSQL_CURSOR_ALREADY_OPEN Date and Time 23.05.2011 11:10:44 Short text Attempt to open