Upgrading OES11/sp1 to SP2

Need to upgrade my OES11sp1 to sp2 on my GW2012sp2 box. My current GW version should be fine on SLES11sp3, correct? Also, anything to watch out for? Novell informed me to use the wagon method for upgrading. Anyone out here used this before?
Thanks for any insight

So from the Groupwise side of things, during the wagon upgrade, do you have to specify any kind of add-on product at all?
Thanks again
Originally Posted by mrosen
Am 08.10.2014 23:06, schrieb shesser:
>
> Thanks for the reply! In your best guesstimation, how long does one
> usually take to finish? I know the offline dvd mode took about 30
> minutes or so but then there was patching afterword that took a while.
That really depends on the speed of your source. A wagon upgrade froma
local SMT server can be finished in less than 30 minutes, including all
patches already applied.
CU,
Massimo Rosen
Novell Knowledge Partner
No emails please!
http://www.cfc-it.de

Similar Messages

Upgrading from sp1 to sp2

Team Portal -
I just upgraded my application from Sp1 to Sp2 (basically right click on application
and select Install -> Update Portal Libraries).
Do I need to do anything to the domain, or just rebuild and redeploy the ear file?
Thanks
Regards,
Neeraj

I didn't do anything to the domain, but I did "install portal" and "install
weblibs" too.
I first did only the update too I think, work perfectly till I made a simple
jsr-168 portlet with the wlw wizard that didn't work.
Thank you for any and all help,
Geoffrey
"Neeraj Harlalka" <[email protected]> schreef in bericht
news:3fe72282$[email protected]..
>
Team Portal -
I just upgraded my application from Sp1 to Sp2 (basically right click onapplication
and select Install -> Update Portal Libraries).
Do I need to do anything to the domain, or just rebuild and redeploy theear file?
>
Thanks
Regards,
Neeraj

Upgraded OES2 SP1 to SP2 no GW Webaccess

We just upgraded an OES2 Sp1 server to OES2 Sp2 and things seemed to be fine from the upgrade point of view, but GW webaccess does not work. Apache and Tomcat both are loaded, as are the GW components and we are getting emails, but no web access, using the same link that we did before. I was thinking that something might have changed with apache and how it works with OES2 SP2, instead of how it did with OES2 SP1, any ideas where to look next?

Originally Posted by jmarton
On Tue, 04 May 2010 15:16:03 +0000, dschaldemcs wrote:
> It is GW 7.0.3 or 4 I cannot remember which at this point. All I
> remember was that there was a TID that explained how OES2 SP2 handled
> things with apache. The title was "GW Webaccess and OES2" I will look
> for it as well.
This one?
Installing WebAccess Application on OES2/SLES10SP1+OES2 Add-on
Yes that was the one, it worked for us, and GW Webaccess is working once more. Thank you
Joe Marton
Novell Knowledge Partner
Enhancement Requests: http://www.novell.com/rms

Download weblogic server 6.1 upgrade from sp1 to sp2

can u give me link to download the weblogic server 6.1 sp1 upgarde to sp2

NSRao <[email protected]> wrote in message news:<[email protected]>...
can u give me link to download the weblogic server 6.1 sp1 upgarde to sp2go to http://support.bea.com and login. then you will see a selection for
service packs near the bottom of the center column. you must have an esupport
account to get the service packs.
Wayne

Trouble doing a database upgrade test for SCCM upgrade from SP1 to SP2

I'm trying to do this test and am having trouble. I'm following the instructions in
http://technet.microsoft.com/en-us/library/bb693648.aspx. However when I enter the command at a command prompt: setup /testdbupgrade e:\database test\sms_hlb_new I get the message: The setup command line option is not valid on this computer.
Any help anyone can provide to get around this problem would be appreciated. I'm not a SQL admin and haven't done an SCCM upgrade before so any tips for a newbie would be great. Thanks!

The procedures are basically the same. You can even attach a copy of the database where ConfigMgr is runnig on (be careful to not /testupgrade the wrong one then). You cannot provide a command line parameter to point to a remote SQL server, but you can
start setup.exe on any machine (so local to the SQL where the copy of the DP is)Torsten Meringer | http://www.mssccmfaq.de

Upgrading from SP1 to SP2 not possible?

Hi,
when installing CRRuntime_12_1_mlb.exe (Crystal Reports 2008) and after that CRRuntime_12_2_mlb.exe, there is an error message like "A different version of this product is already installed...cannot continue...." (translated from German). Why is that? Isn't it possible to upgrade?
Regards,
Florian
Edited by: floele on Aug 13, 2009 1:55 PM

It should be possible. Unfortunately, my testing indicates the following:
If you try to install CRRuntime_12_2_mlb.exe over CRRuntime_12_1_mlb.exe, you get the error.
Trying to update the runtime using the CRRuntime_12_1_mlb.msi results in the same error.
Same error is produced trying to update runtime installed by CRRuntime_12_1_mlb.msi and trying to update that with CRRuntime_12_2_mlb.msi.
Possible workarounds:
1) Preliminary test indicates that if you create your own setup project (setup.exe) or msi, the issue goes away.
2) Uninstall the runtime from the CRRuntime_12_1_mlb.* and do a new install using CRRuntime_12_2_mlb.*
This issue will be tracked with R&D for a resolution. I will update this thread once I have the tracking number.
Ludek

Please help: Application doesn't work after upgrade to Workshop 8 sp2 from sp1

Hi,
Our application worked on workshop 8 sp1. After we upgrade system from sp1 to
sp2, some of the part doesn't work propertly any more.
1. netui:select seems not bind form data propertly. For drop down list box in
forms, although user has chosen something from the drop down list box, the returned
value in the form is always null.
2. we use Java script window.open(url,...) to download and view files. After upgrade
from sp1 to sp2, clients keep getting IE error complaining that "Internet Explore
can not open this Internet site. The request site is either unavailable or can
not be found. Please try again later", although the server and the files are all
in local host server.
Please help. Thanks

Did you update your workshop application files and recompile your application?
A few things changed between GA and sp2, some annotations were renamed, and some
were added.
If you open up your application in Workshop sp2, it should given you the option
to upgrade your application.
Failing that, you may need to go through the code that is not performing as it
was before and check whether it was not utilising a bug that was fixed in sp2
and thus causes it to not function correctly now.
"Cynthia" <[email protected]> wrote:
>
Hi,
Our application worked on workshop 8 sp1. After we upgrade system from
sp1 to
sp2, some of the part doesn't work propertly any more.
1. netui:select seems not bind form data propertly. For drop down list
box in
forms, although user has chosen something from the drop down list box,
the returned
value in the form is always null.
2. we use Java script window.open(url,...) to download and view files.
After upgrade
from sp1 to sp2, clients keep getting IE error complaining that "Internet
Explore
can not open this Internet site. The request site is either unavailable
or can
not be found. Please try again later", although the server and the files
are all
in local host server.
Please help. Thanks

Exchange 2010 failing to upgrade to SP1, SP2, or SP3

My host server is running Windows Server 2008 R2 Standard. Currently Exchange 2010 is without any service pack. I initially tried to upgrade to SP1 but that failed with the message below. Thinking that I could perhaps skip to SP2 or even SP3 I attempt that
upgrade and received a similar message though not posted here. The Schema for our domain shows that it is at the Windows Server 2008 R2 level. I am attempting to apply the update using the Enterprise/Schema admin account for our network.
Here is the error message that I receive. This happens after all prereq checks are done and the installation has actually started.
Summary: 15 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:04
Organization Preparation
Failed
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Set the default Accepted domain from the default recipient policy";
$defaultEmailAddressPolicy = get-EmailAddressPolicy -Identity:"Default Policy";
$defaultSmtpTemplate = $defaultEmailAddressPolicy.EnabledPrimarySMTPAddressTemplate;
$index = $defaultSmtpTemplate.IndexOf("@");
$eapAuthoritativeDomain = $defaultSmtpTemplate.Substring($index+1);
$defaultDomain = get-accepteddomain | where {$_.DomainName -eq $eapAuthoritativeDomain };
$defaultDomain | set-accepteddomain -MakeDefault:$true;
Write-ExchangeSetupLog -Info "Default domain $defaultDomain";
" was run: "The operation couldn't be performed because object 'Default Policy' couldn't be found on 'marvin.intercity.org'.".
The operation couldn't be performed because object 'Default Policy' couldn't be found on 'marvin.intercity.org'.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=m...
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Set the default Accepted domain from the default recipient policy";
$defaultEmailAddressPolicy = get-EmailAddressPolicy -Identity:"Default Policy";
$defaultSmtpTemplate = $defaultEmailAddressPolicy.EnabledPrimarySMTPAddressTemplate;
$index = $defaultSmtpTemplate.IndexOf("@");
$eapAuthoritativeDomain = $defaultSmtpTemplate.Substring($index+1);
$defaultDomain = get-accepteddomain | where {$_.DomainName -eq $eapAuthoritativeDomain };
$defaultDomain | set-accepteddomain -MakeDefault:$true;
Write-ExchangeSetupLog -Info "Default domain $defaultDomain";
" was run: "You cannot call a method on a null-valued expression.".
You cannot call a method on a null-valued expression.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=m...
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Set the default Accepted domain from the default recipient policy";
$defaultEmailAddressPolicy = get-EmailAddressPolicy -Identity:"Default Policy";
$defaultSmtpTemplate = $defaultEmailAddressPolicy.EnabledPrimarySMTPAddressTemplate;
$index = $defaultSmtpTemplate.IndexOf("@");
$eapAuthoritativeDomain = $defaultSmtpTemplate.Substring($index+1);
$defaultDomain = get-accepteddomain | where {$_.DomainName -eq $eapAuthoritativeDomain };
$defaultDomain | set-accepteddomain -MakeDefault:$true;
Write-ExchangeSetupLog -Info "Default domain $defaultDomain";
" was run: "You cannot call a method on a null-valued expression.".
You cannot call a method on a null-valued expression.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=m...
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Set the default Accepted domain from the default recipient policy";
$defaultEmailAddressPolicy = get-EmailAddressPolicy -Identity:"Default Policy";
$defaultSmtpTemplate = $defaultEmailAddressPolicy.EnabledPrimarySMTPAddressTemplate;
$index = $defaultSmtpTemplate.IndexOf("@");
$eapAuthoritativeDomain = $defaultSmtpTemplate.Substring($index+1);
$defaultDomain = get-accepteddomain | where {$_.DomainName -eq $eapAuthoritativeDomain };
$defaultDomain | set-accepteddomain -MakeDefault:$true;
Write-ExchangeSetupLog -Info "Default domain $defaultDomain";
" was run: "Cannot bind argument to parameter 'Identity' because it is null.".
Cannot bind argument to parameter 'Identity' because it is null.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=m...
Elapsed Time: 00:00:04
Preparing Setup
Cancelled
Stopping Services
Cancelled
Languages
Cancelled
Remove Exchange Files
Cancelled
Preparing Files
Cancelled
Copy Exchange Files
Cancelled
Language Files
Cancelled
Restoring services
Cancelled
Languages
Cancelled
Hub Transport Role
Cancelled
Client Access Role
Cancelled
Mailbox Role
Cancelled
Management Tools
Cancelled
Finalizing Setup
Cancelled

Agreed - check the default email address policy is not corrupt and same for remote domains - did you make ay modifications to them?
Since he is running this as das Uber-admin, it will prep Exchange schema and AD even if not explicitly done prior. Exchange setup is helpful like that, well some times....
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Upgrade App-V 5.0 sp1 to SP2 Hotfix4

long time reader first time poster
we currently have a App-V 5.0 SP1 native environment, we deploy the App-V client via SCCM and use the MSI in the command line ( msiexec
/i "appv_client_MSI_x86.msi" /q /norestart ACCEPTEULA=1 /l "C:\<log directory>" )
I would like to upgrade our environment to SP2 HF4 ( in a test lab first and then schedule to live )
Now is it better to create 2 new SCCM packages one for SP2 and one for the HF4? or is there a way to combine them?
also would you put the ClientUI install in the same package?
any advice or web URL either way would be very much appreciated

just to add, I am unable to get Hotfix 4 installed successfully either via a command line ( Msiexec /p mspfile ) or right clicking the MSP and selecting Apply
The HF installs and once you reboot you are no longer able to use App-V 5.0 Client UI or any of the App-V delivered apps.
The client has SP1 and was then upgraded to SP2 using the command line in my top post without the hotfix installed works as expected.
Does anyone have a guide to how to use the MSP file?
Update - it appears that the Hotfix removes the SP2 client

Exchange Server 2007 sp1 to sp2 upgrade error

Hello,
I am trying to upgrade exchange server 2007 to exchange server 2010 but my exchange server 2007 is running sp1 which cannot be directly upgraded to exchange 2010. To do this I need to first upgrade my exchange server 2007 sp1 to sp2, i am stuck because I
keep getting the error below:
Error:
The well-known object entry with GUID 6c01d2a7-f083-4503-8132-789eeb127b84 on the otherWellKnownObjects attribute on the container object CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=mw refers to a non-USG CN=Exchange Servers,OU=Microsoft
Exchange Security Groups,DC=domain,DC=mw. Please either delete the well-known object entry or promote the target object to a universal security group.
Does anyone know how to resolve this error?? please assist

My recommendation to you is to upgrade it to Exchange 2007 SP3 with latest Rollup Updates.
Note: Before you start installing the SP3 make sure you upgrade the AD Schema for Exchange 2007 SP3.
For the error you are getting
https://social.technet.microsoft.com/Forums/exchange/en-US/a9d56cc7-dbf8-401c-b4ea-1bfd3c1f13fa/problems-installing-exchange-2007-sp1-ghost-guid?forum=exchangesvradminlegacy
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

OES11 SP1 and Groupwise 2012 upgrade

Hi I'm am testing Groupwise 2012 with OES11 SP1 but can't seem to get the domain and Post office to start.
OES11 worked pre SP1 but.once I updated the server Groupwise doesn't want to start. Any ideas.
Cheers

Hi thanks for your quick response. That is exactly my problem. When I delete the file GroupWise works. Looks like Novell are looking at fixing the issue.
I will wait for the fix to be released.
Originally Posted by ckazzi
Hi I'm am testing Groupwise 2012 with OES11 SP1 but can't seem to get the domain and Post office to start.
OES11 worked pre SP1 but.once I updated the server Groupwise doesn't want to start. Any ideas.
Cheers

OES11-SP1-Updates not listed

New to patching OES11. I upgraded the server from OES11 / SLES11 SP1
to OES 11 SP1 / SLES 11 SP2. I now want to apply all the latest
patches. zypper lr shows OES11-Updates with enabled:no and
refresh:yes. I don't see an OES11-SP1-Updates. I assume there should
be one. How do I add this?
Ken

On 28/02/2013 14:06, KeN Etter wrote:
> New to patching OES11. I upgraded the server from OES11 / SLES11 SP1
> to OES 11 SP1 / SLES 11 SP2. I now want to apply all the latest
> patches. zypper lr shows OES11-Updates with enabled:no and
> refresh:yes. I don't see an OES11-SP1-Updates. I assume there should
> be one. How do I add this?
Have you (re)registered your server with NCC since upgrading?
HTH.
Simon
Novell/SUSE/NetIQ Knowledge Partner
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

Proxy upgrade from SP1 to SP5 doesn't work anymore for virus scanning.

Upgraded from SP1 to SP5 and the virus scanning updates no longer work. No changes have been made it is a complete carbon copy using the migrate button. No ip addresses have been altered nor has the ports been changed. I've tried SP2, 3 & 4 and they too fail with a 504 error log. I turned SP1 back on and it works first time.
If you can solve this I'll be so impressed because its driving me crazy. I've checked all config files and everything is as it should be.

Hi
This thread was interesting as I have many customer sites using virus scanning without any problems together with this proxy.. Some sites are really huge as well.
Can the author of this thread explain how the scanning that now refuse to work is done with the proxyserver... Through an API or as forwarded requests to another scanning proxy (trend micro etc.) or what ? Maybe this is done in some way I am not aware of. Then I am really interested in your problem.
We mostly use it "user->proxy->vscanner->site" where the proxy and the scanner often run at the same host. This in huge installations together with load balancers infront and behind.
/Per-Olov

NCS on OES11 SP1 needs eDir 8.8.7 or later. With a replica?

We have 3 replicas running, one NW 6.5SP8 and two OES2SP3 (eDir 8.8 SP6). These 3 servers are 32bit.
I'm about to test NCS in the lab (we've not used it before) and see on page 50 (4.6.3) of "clus_admin_lx.pdf" that eDir 8.8.7 is required for managing cluster objects.
Is it okay if we keep our existing replicas and not yet add a replica to our OES11SP1 servers?
I interpret that requirement as saying that we need to manage cluster objects using iManager on one of our OES11 SP1 servers which run eDir 8.8.7. No replica required, correct?
Thanks,
Marc

In article <[email protected]>, Ohico wrote:
> I'm about to test NCS in the lab (we've not used it before) and see on
> page 50 (4.6.3) of "clus_admin_lx.pdf" that eDir 8.8.7 is required for
> managing cluster objects.
That would be for the specific version of NCS you are using that would
also have a say in which version of OES it runs on that should have that
version of eDir running on it.
> Is it okay if we keep our existing replicas and not yet add a replica
> to our OES11SP1 servers?
Well since your new OES11sp1 servers will be the only ones with the
newer eDir on them (unless you are upgrading eDir on the older boxes) it
would be a good thing to have a replica on at least one of these eDir
8.8.7 boxes in case there happen to be any 8.8.7 specific objects or
attributes in the newer eDir. I don't know of any, but that doesn't mean
the developers haven't come up with some.
> I interpret that requirement as saying that we need to manage cluster
> objects using iManager on one of our OES11 SP1 servers which run eDir
> 8.8.7. No replica required, correct?
Technically yes. But I would still like to have at least one 8.8.7
hosted replica of the partition(s) containing the new boxes.
Andy Konecny
Knowledge Partner (voluntary SysOp)
KonecnyConsulting.ca in Toronto
Andy's Profile: http://forums.novell.com/member.php?userid=75037

Patch Plumtree Foundation 6.0 SP1 to SP2

Hi,
we would at like to patch our installation of 6.0 SP1 to SP2 which is available since April 2008 (we cannot upgrade to 6.5 or even 10gR3 yet).
I think I have downloaded everything related to Foundation 6.0 and searched all possible plumtree, bea and oracle sites now but I didn't find any instructions how to apply the service pack.
The only document which was updated in 2008 are the Release Notes (http://one.bea.com/portal/server.pt?open=18&objID=2795854&mode=2&in_hi_userid=2&cached=true). The installation plan which was part of the 460MB download has a section for SP1 installation only and that's it.
So are we supposed to install the whole thing AGAIN to get SP2? Did anybody ever patch 6.0 SP1 to SP2?

Hi guys,
AFAIK, BEA doesn't release standalone maintenance pack for 6.x basically. In other words, the only way to upgrade is to use the 6.0 SP2 or 6.1 MP2 installer on top of previous version.
The only patch I know is for 6.1 MP1, there is a patch. So after applying, it should be 6.1.1.1.
I've done a the following upgrade so far, using the new installer and they work:
6.1 -> 6.1 MP1 -> 6.1.1.1 -> 6.1 MP2
6.5 -> 6.5 MP1
I haven't done the 6.0sp1 to 6.0sp2 but I guess it is the same thing. Do remember to run the installer on to upgrade all related components, check your deployment architecture.
Hope this helps.
Terry

Upgrading OES11/sp1 to SP2

Similar Messages

Maybe you are looking for