Upgrading open boot on ultra 2
Hello everyone
*I know this is not Solaris 10/software related but I am at a lost where to ask for help with this.
I have a ultra 2, dual CPU (300's) system and it has an older openboot. (I don't have the exact revision number with me but can have it later) and I would like to upgrade it but have no clue where to go for help and to get the file itself. and how to do it.
thanks for the help.
Luc
I think the current version I have right now is 3.25
is this the latest one?
I found this..
http://sunsolve.sun.com/search/document.do?assetkey=1-21-104169-08-1&searchclause=Ultra%202
but its version 3.25
is there a newer one?
thanks
Luc
Similar Messages
-
Can't open boot device??? On sparc 7
Hi
I'm new to Solaris, please be patient.
I got a ultra 1 machine and tried to upgrade the hard drive. I installed an IBM 4.55 GB sca drive. When I boot this message comes up.
Boot device /sbus/espdma/csp/sd@0,0:a File and args: -F cprbooter cprboot
Bad magic number in disk label
Can't open disk label package
Can't open boot device
I did probe-scsi command it says
Unit 0 Disk TANDEM 4512-2 2626
Any help would be great. Is the hard drive not compatible with solaris? I tried a couple of other drives same result. Thanks in advanceYou're trying to remove an old/small hard disc and you try to
install the new 4.5GB drive instead, is that right?
The boot-file property in the openboot prom is set to "...cprboot" because the system was suspended
(and not shutdown), before you've removed the hard disc. On power-up, the
system wants to resume from suspend state with the information saved
on the hard disc and tries to do that using the "cprboot" boot
program. (obviously this cannot work because the disc with the suspend
state data is gone). You can probably get rid of this error by
using the open boot prom commands printenv/setenv to check/correct
the boot-file property.
The other problem is the "Bad magic number in disk label" error
message, but this is just a hint that the new disc contains no
valid disk label, so you cannot boot from the new disc, yet.
This is to be expected - because the disc contains no valid data.
I'd say that you should just place you solaris installation cd into
the cdrom drive and try a 'boot cdrom' at the open boot prompt and
install a fresh copy of solaris on the new drive. Then restore
your user files from a backup (or whatever) on the new drive. -
Console Mode with third-party PCI card w/ open firmware bios,Open Boot Info
PPC macs used open firmware to boot, and their videocards contained forth code in their rom. There are even custom roms for PC video cards which contain code for the PPC mac open firmware.
Could such a card be initialized as the primary display device on an Ultra 5?
I'm betting I'm going to be answered with 'use a sun branded card'. I can't imagine the rom on these cards is so much different than that used on the PPC mac?
What exactly does Open Boot do to find a videocard? Are there any documents on this? I assume it finds some forth routine in the cards rom and runs that to initialize it and identify it's capabilities? Again, I would really appreciate some direction on where to look for docs.
I'm confused on the difference between openfirmware (apparently a spec), and open boot (sun's implementation? Are all implementations compatible with eachother?)
http://www.openbios.org/Welcome_to_OpenBIOS
"Open Firmware is found on many servers and workstations and there are several commercial implementations from SUN, Firmworks, CodeGen, Apple, IBM and others."
Additionaly, what is the sun4u architecture? sun4v architecture? Which workstations are which? System handbook doesn't seem to say under 'hardware specs'.
So, if all else fails and using a card with an openfirmware rom doesn't help me, how do I go about doing this myself?
I know how to work VGA console mode via the stardard vga registers, Is there a way to get open boot to do exactly what I tell it in terms of registers and addresses?
Can I get an uncompiled form of my Open Boot Prom for my Ultra 5?
All I'm really looking for is good docs/source on how Open Boot/ Open Firmware work, specificly conerning PCI video devices.
Thanks for any tips.I haven't looked at anything beyond the OpenBoot level.
I've been neglecting this project for some time.
I just wanted to let anyone else in my situation know that the sun OpenBoot documentation was very helpfull in my sucessfully setting a mode with the card.
I don't know how the OS and later OpenWidows interact with the card, or with the information OpenBoot has about it, and it's current mode.
I hadn't really looked at any of that yet. Though this information will probably show up as soon as I bother to look for it, it'd be nice if some one recommends a specific doc, or has a short answer about the topic.
There happens to be an open source driver for my card, for XFree86 and Xorg, however, I've had enough of a challenge merely using OpenWindows.
/etc/X11/xorg.conf /etc/X11/XFree86.conf
Where are simmilar files for OpenWindows? Again, it's probably in some docs I haven't bothered to read yet.
Sparcy: Weird that the card has Fcode and OpenBoot doesn't add it's package to the device tree. I assume it treats it like a non Fcode PCI card? Does it recognize the contents of the PCI base address registers? Try proding it's PCI registers and see if they behave as expected.
If the card is actually working and you can read the expansion rom I don't see why the Fcode didn't work. Maybe it has a later incompatible Fcode revision? Open boot 4.x 5.x? sun4u as opposed to something else? Or maybe the Fcode was designed to lock the card to a certain type of system (I doubt that).
http://www.sunshack.org/data/bootroms.html
Newer versions of openboot, and new hardware series listed at that link. Where's a more complete list?
Oh well, I guess I should bother to read up on this more thoroughly and finish the job.
Let me know if you find out what the problem was, or if you try that MAC card. Thanks. -
Upgrading to Boot Camp 5.0 from 4.1: Would it require a re-install of Windows (Win7 SP1)?
I have a Late 2012 Mac Mini (OS X 10.8.3) with Boot Camp 4.1 and Windows 7 SP1 installed. I mainly work on Win7 and would like to continue doing so. My question is: Would upgrading to Boot Camp 5.0 require me to re-install my Win7 or does it work like a simple update? I certainly do not want to waste any time having to re-install my copy of Windows and all my content as it is working fine, but would like to install the latest Boot Camp drivers if it is no problem doing so.
Thanks mate, update to Boot Camp 5.0 done! Had a issue at first which didn't let me run the update, but this was resolved by downloading (from Apple's support website) and re-installing my (now previous) BC4.1 drivers again. Think it has something to do with the previous BootCamp.msi file that allows the BC4.1 drivers to be uninstalled first before updating to BC5.0. Got that tip from a diffrent question thread on the support website. Anyway, thereafter running the BC5.0 update was no problem. Takes a little while for everything to get fully updated on the next restart, but all good. Cheers.
-
Have lost ability to open Boot Camp on start or restart. Icon does not show up. Had been working for 2 years, then nothing. Recently had problems with Kodak Easy Share in PC partition. Any connection? Any hope of reopening Boogt Camp without losing data already there?
Can you see there is a partition?
Can you boot Windows 7 DVD?
Did you think you would never need a backup image?
So no Safe Boot, no F8, possible?
Paragon CampTune
Paragon CampTune is a commercial product that is designed expressly for this task. http://www.paragon-software.com/home/camptune/ It consists of a downloadable ISO that needs to be burned to a disc and booted from in order to resize the partitions. During testing it was available free, but now costs US$19.95. MR user Rodus reports that it damaged their OS X partiton and a reinstall was required, so heed the warning and have a backup.
Paragon Partition Manager
From the makes of CampTune is a commercial tool that is similar in functionality to GParted Live, but has a more polished/friendly user interface than GParted Live. Previously only the US$79.95 Professional version supported all the features required for this, but as of version 11 the US$39.95 Personal version has also been reported to work. http://www.paragon-software.com/home/pm-personal/
Securing Dual-System Configuration
Imaging is still the most affordable and robust way to secure computer data. Unfortunately Mac OS X backs up only HFS+ volumes, leaving Windows with dual-system configurations unsecured. You can permanently lose all of your data unless you have a Windows-compatible backup solution.
Paragon’s CampTune and Paragon’s Drive Copy for Mac can secure the entire dual-system configuration. CampTune creates traditional images of volumes or entire hard disks, Drive Copy can copy them to other disks. In case of an emergency, you can restore the previously created image or copy all your data back to its original state.
Winclone/Disk Utility
Winclone is a free tool for creating and restoring backup images of your Windows partition. One of its key features is that it can restore to a larger partition than the one the image was created from.
NOTE: Winclone has been discontinued, but for now remains available and capable of completing these tasks (including creating and restoring Windows 7 images).
Winclone updated to support Lion Winclone updates and download
Disk Utility can resize HFS+ (Mac OS) partitions, but is currently incapable of resizing NTFS partitions, so you could use it to reduce the size of the HFS+ partition and create a new larger placeholder MS-DOS (FAT) partition
The full process would be:
Backup Windows partition with Winclone.
(if the new Windows partition is smaller than the old one make sure you set the preferences in Winclone to save the image as an uncompressed dmg)
Delete old Windows partition
Resize current Mac Partition
Create new Windows partition as MS-DOS (FAT) in free space after Mac OS partition.
(If the new Windows partition is smaller than the old one an additional step is required: shrink the filesystem on the image by selecting Tools->Shrink Windows (NTFS) Filesystem)
Reboot your computer for the new Windows partition to mount properly (winclone may not restore if you don't reboot)
Restore Winclone partition over new Windows partition
An alternate Winclone based process is described in the External Guides section -
"Can't open boot device" mesage when installing Solaris 10 by cdrom
I am getting the following error message when I try to install Solaris 10 from cdrom:
"Can't open boot device."
The system I am trying to install to is a SunFire v100.
The boot command I am using is:
ok boot cdrom - nowin
I have used this cd to successfully install several other v100s without any trouble. I have tried another cd and get the same behavior. I have also tried installing another v100 and get the same error.
Any help on this would be greatly appreciated.Please check the "cdrom" alias.
-g. -
Open Boot Firmware - nvalias backup_root - Command Behavior
My configuration is, a Sun Fire 280R running Solaris 9
with two duplicate hard drives, setup as a software RAID1
mirror.
I have also done the open boot command:
OK
nvalias backup_root /sbus@1,f8000000/esp@1,200000/sd@3,0:a
(telling open boot that the backup root device is the second phyical hard drive in the mirror)
And then:
OK printenv boot-device
boot-device = disk net
OK setenv boot-device disk backup-root net
boot-device = disk backup-root net
OK nvstore
I know the above commands sets the open boot firmware
to boot from the second drive in the mirror rather then the mirror drive itself if the mirror should fail.
Yet, I am unsure if this will just boot into open boot firmware's single user mode, or if it will edit the vfstab and boot multi user using the second physical drive for all references of slices in the vfstab.
When I first setup the drive mirror (RAID 1) I used the command: metaroot to edit vfstab, to reference the mirror device rather then physical drive and slices.
For example: metaroot d54
This changed the vfstab to point to the d54 mirrored
device rather then either of two physical drives.
So, my question is:
Does setting the open boot nvalias command change the vfstab in the multi user boot environment as the metaroot command did , or does it just let open firmware boot to a single user mode, then letting you use open boot firmware to manually change the vfstab to reflect the the
surviving drive of the mirror.
Thanks in advance for any help.I power on and am immediately in Open Firmware (it says Welcome to Open Firmware) black text on white with > prompt. It suggests "mac-boot" or "shut-down." the latters shuts it down; choosing boot changes the screen to grey with the alternating Question ?/Finder Man folders. Then, at least for the next 10 minutes, nothing happens (haven't waited longer than that). Doesn't boot into Target Disk Mode. When you try to boot from disk, it goes to Open Firmware; if you choose mac-boot again holding C, it foes to a Folder Finder Man on it and doesn't blink--which means it found a system and is booting--except nothing else happens (at least for the few minutes I have waited in the past. Am I just impatient?). I removed the hard drive and tested it in an enclosure--it's fine with an intact installation of OS X and replaced the case screws and it immediately booted into OS X. I updated the system , but upon restart it went straight back to Open Firmware. I think I need to designate a Start up disk. How do you do that from Open Firmware. Or in UNIX for that matter? Can I get to Unix from Open Firmware (I have X11 installed on all my machines)? As I am typing this, the PowerBook spontaneously began to boot into OS X but when it got to the point where the boot screen changes to the blue system, it restarted and went to Open Firmware.
-
Getting an error 'Cannot open Boot device' while trying to install Solaris
Hi,
We were trying to install Solaris * on a Sun Sparc system and the CD rom drive does not seem to get recognised. When we try booting from cd rom we get an error 'Cannot open boot device' .
This server was up & running and we were trying to remove a hard disk that had failed and modified the vfstab script . After that the system failed to even boot up. So when we tried reinstalling the OS we are running into this problem.
Am new to this technology ...And any help would be greatly appreciated. .....
ThanksCdrom drive must be scsi device 6
I assume you are running < boot cdrom> at the ok prompt
also at the ok prompt run the command <probe-scsi> (without the angled brackets) you need to see the following:
Target 6
Unit 0 Removable read only device TOSHIBA XM.......bigpileofnumbers
If not, check the cdrom drive and the cdrom inside
hope this helps
Alan -
Problem in opening boot camp assistant
when i open boot camp assistant,it is saying that boot camp assistant quit unexpectedly.
tell a solution for thatHi Rohit,
Thanks for visiting Apple Support Communities.
Start with the troubleshooting tips in this article if Boot Camp Assistant is quitting unexpectedly on your Mac:
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
Cheers,
Jeremy -
I have seen requests for Open Boot PROM (OBP) source code for
OpenSPARC T1. The OBP binary is already published for OpenSPARC T1
with SAM and Legion simulators.
If the OBP source is made available, what is the potential use of
this source code: Is it needed for reference only or
for use with simulator or with the real hardware ? Anybody planning
to change OBP or add new I/O devices in OBP ?
If you are planning to do OpenSPARC T1 based FPGA or silicon implementation,
would you use OBP or create your own BIOS like firmware ? Anybody working
on BIOS for OpenSPARC T1 ?
Any ideas or comments are welcome.I would love to have the OpenBoot code. Up to now, I am using PROLL (http://people.redhat.com/zaitcev/linux/). PROLL is a sun4m OpenBoot.
The problem with PROLL is that only old hardware is supported (sun4m), and basic
things like a forth emulator are not included.
If I get the sourcecode for the OPB, I would use for the following projects:
-QEMU (http://fabrice.bellard.free.fr/qemu/) sun4u (maybe sun4v) support. QEMU works
with sun4m (PROLL), but it still does not work with sun4u because of lack of OBP.
-SCOORE. At UCSC, the MASC (http://masc.soe.ucsc.edu) research group is
developing a new SPARC processor. We target FPGA boards (altera). To boot the
CPU we can use a small dummy code like in the Leon3 (www.gaisler.com) processor
or we can use an OPB. We would prefer the OPB much more. Otherwise, we need to "twick" the Linux kernel. -
Hi everyone
I am running Snow Leopard on my early 2006 MBP. I just downloaded Boot Camp 3.1 so I can upgrade 3.0. Is there anything special I need to do to "install" 3.1 so that when I run Boot Camp Assistant it uses 3.1 instead of 3.0? Thank You.The Boot Camp 3.1 drivers you downloaded have to be installed in Windows after running Boot Camp Assistant. That update does not apply to Boot Camp Assistant, and as you are using Mac OS X 10.6.8, you are using the most recent Boot Camp Assistant version for Snow Leopard.
Once you have installed Windows with Boot Camp, insert the Snow Leopard DVD in Windows and install the Boot Camp 3.0 drivers. Then, install the Boot Camp 3.1 drivers -
After pacman -Syu upgrade xfce boots black screen cursor
Hello,
I've recently upgraded the system with pacman -Syu and it seem something has gone wrong with new xfce 4.12. I have changed DM from slim to lxdm and can only boot to openbox but not xfce. I also switch to tty2 and try a startx with ~/.xinitrc file with exec startxfce4 but it does not launch properly. What I mean is both the display manager and a startx boots me into a black screen with a cursor when i try to launch xfce. Again I can boot to openbox just fine. I've searched for similar topics but cant seem to find any solution. Can anyone help?
[ 18.673]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 18.673] X Protocol Version 11, Revision 0
[ 18.673] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 18.673] Current Operating System: Linux arch-server 3.14.35-1-lts #1 SMP Sat Mar 7 19:24:12 CET 2015 x86_64
[ 18.674] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=d6352b14-5ca7-476a-9f43-2bc25278effd rw quiet
[ 18.674] Build Date: 14 March 2015 06:45:50PM
[ 18.674]
[ 18.674] Current version of pixman: 0.32.6
[ 18.674] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 18.674] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.674] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 17 03:38:39 2015
[ 18.937] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 19.047] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 19.553] (==) No Layout section. Using the first Screen section.
[ 19.553] (**) |-->Screen "Default Screen" (0)
[ 19.553] (**) | |-->Monitor "<default monitor>"
[ 19.586] (==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
[ 19.586] (==) Automatically adding devices
[ 19.586] (==) Automatically enabling devices
[ 19.586] (==) Automatically adding GPU devices
[ 20.294] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 20.294] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 20.294] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 20.354] (II) Loader magic: 0x815d80
[ 20.354] (II) Module ABI versions:
[ 20.354] X.Org ANSI C Emulation: 0.4
[ 20.354] X.Org Video Driver: 19.0
[ 20.354] X.Org XInput driver : 21.0
[ 20.354] X.Org Server Extension : 9.0
[ 20.356] (EE) systemd-logind: failed to get session: PID 940 does not belong to any known session
[ 20.357] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 20.359] (--) PCI:*(0:1:5:0) 1002:9616:1462:7641 rev 0, Mem @ 0xd0000000/268435456, 0xfebe0000/65536, 0xfea00000/1048576, I/O @ 0x0000d000/256
[ 20.359] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 20.422] (II) "glx" will be loaded by default.
[ 20.423] (II) LoadModule: "vnc"
[ 20.568] (II) Loading /usr/lib/xorg/modules/extensions/libvnc.so
[ 22.029] (II) Module vnc: vendor="Constantin Kaplinsky"
[ 22.029] compiled for 1.17.1, module version = 1.0.0
[ 22.029] Module class: X.Org Server Extension
[ 22.029] ABI class: X.Org Server Extension, version 9.0
[ 22.029] (II) LoadModule: "glx"
[ 22.030] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 24.054] (II) Module glx: vendor="X.Org Foundation"
[ 24.208] compiled for 1.17.1, module version = 1.0.0
[ 24.208] ABI class: X.Org Server Extension, version 9.0
[ 24.208] (==) AIGLX enabled
[ 24.208] (==) Matched ati as autoconfigured driver 0
[ 24.208] (==) Matched ati as autoconfigured driver 1
[ 24.208] (==) Matched modesetting as autoconfigured driver 2
[ 24.208] (==) Matched fbdev as autoconfigured driver 3
[ 24.208] (==) Matched vesa as autoconfigured driver 4
[ 24.208] (==) Assigned the driver to the xf86ConfigLayout
[ 24.208] (II) LoadModule: "ati"
[ 24.261] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 24.332] (II) Module ati: vendor="X.Org Foundation"
[ 24.332] compiled for 1.17.0, module version = 7.5.0
[ 24.332] Module class: X.Org Video Driver
[ 24.332] ABI class: X.Org Video Driver, version 19.0
[ 24.332] (II) LoadModule: "radeon"
[ 24.333] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 24.765] (II) Module radeon: vendor="X.Org Foundation"
[ 24.765] compiled for 1.17.0, module version = 7.5.0
[ 24.765] Module class: X.Org Video Driver
[ 24.765] ABI class: X.Org Video Driver, version 19.0
[ 24.765] (II) LoadModule: "modesetting"
[ 24.765] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 24.878] (II) Module modesetting: vendor="X.Org Foundation"
[ 24.878] compiled for 1.17.1, module version = 1.17.1
[ 24.878] Module class: X.Org Video Driver
[ 24.878] ABI class: X.Org Video Driver, version 19.0
[ 24.878] (II) LoadModule: "fbdev"
[ 24.878] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 25.005] (II) Module fbdev: vendor="X.Org Foundation"
[ 25.005] compiled for 1.17.0, module version = 0.4.4
[ 25.005] Module class: X.Org Video Driver
[ 25.005] ABI class: X.Org Video Driver, version 19.0
[ 25.005] (II) LoadModule: "vesa"
[ 25.006] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 25.099] (II) Module vesa: vendor="X.Org Foundation"
[ 25.099] compiled for 1.17.0, module version = 2.3.2
[ 25.099] Module class: X.Org Video Driver
[ 25.099] ABI class: X.Org Video Driver, version 19.0
[ 25.099] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
[ 25.111] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 25.111] (II) FBDEV: driver for framebuffer: fbdev
[ 25.111] (II) VESA: driver for VESA chipsets: vesa
[ 25.111] (++) using VT number 7
[ 25.184] (II) [KMS] Kernel modesetting enabled.
[ 25.184] (WW) Falling back to old probe method for modesetting
[ 25.184] (WW) Falling back to old probe method for fbdev
[ 25.184] (II) Loading sub module "fbdevhw"
[ 25.184] (II) LoadModule: "fbdevhw"
[ 25.184] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 25.280] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 25.280] compiled for 1.17.1, module version = 0.0.2
[ 25.280] ABI class: X.Org Video Driver, version 19.0
[ 25.280] (WW) Falling back to old probe method for vesa
[ 25.280] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
[ 25.280] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 25.280] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 25.280] (==) RADEON(0): Default visual is TrueColor
[ 25.280] (==) RADEON(0): RGB weight 888
[ 25.280] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 25.280] (--) RADEON(0): Chipset: "ATI Radeon 3000 Graphics" (ChipID = 0x9616)
[ 25.280] (II) Loading sub module "dri2"
[ 25.280] (II) LoadModule: "dri2"
[ 25.280] (II) Module "dri2" already built-in
[ 25.280] (II) Loading sub module "exa"
[ 25.280] (II) LoadModule: "exa"
[ 25.281] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 25.406] (II) Module exa: vendor="X.Org Foundation"
[ 25.406] compiled for 1.17.1, module version = 2.6.0
[ 25.406] ABI class: X.Org Video Driver, version 19.0
[ 25.406] (II) RADEON(0): KMS Color Tiling: enabled
[ 25.406] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 25.406] (II) RADEON(0): KMS Pageflipping: enabled
[ 25.406] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 25.440] (II) RADEON(0): Output VGA-0 has no monitor section
[ 25.471] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 25.510] (II) RADEON(0): EDID for output VGA-0
[ 25.541] (II) RADEON(0): EDID for output HDMI-0
[ 25.541] (II) RADEON(0): Manufacturer: BBY Model: bb20 Serial#: 16843009
[ 25.541] (II) RADEON(0): Year: 2012 Week: 0
[ 25.541] (II) RADEON(0): EDID Version: 1.3
[ 25.541] (II) RADEON(0): Digital Display Input
[ 25.541] (II) RADEON(0): DFP 1.x compatible TMDS
[ 25.541] (II) RADEON(0): Max Image Size [cm]: horiz.: 44 vert.: 25
[ 25.541] (II) RADEON(0): Gamma: 2.20
[ 25.541] (II) RADEON(0): DPMS capabilities: Off
[ 25.541] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 25.541] (II) RADEON(0): First detailed timing is preferred mode
[ 25.541] (II) RADEON(0): redX: 0.645 redY: 0.331 greenX: 0.335 greenY: 0.621
[ 25.541] (II) RADEON(0): blueX: 0.152 blueY: 0.053 whiteX: 0.313 whiteY: 0.329
[ 25.541] (II) RADEON(0): Supported established timings:
[ 25.541] (II) RADEON(0): 720x400@70Hz
[ 25.541] (II) RADEON(0): 640x480@60Hz
[ 25.541] (II) RADEON(0): 640x480@67Hz
[ 25.541] (II) RADEON(0): 640x480@72Hz
[ 25.541] (II) RADEON(0): 640x480@75Hz
[ 25.541] (II) RADEON(0): 800x600@56Hz
[ 25.541] (II) RADEON(0): 800x600@60Hz
[ 25.541] (II) RADEON(0): 800x600@72Hz
[ 25.541] (II) RADEON(0): 800x600@75Hz
[ 25.541] (II) RADEON(0): 832x624@75Hz
[ 25.542] (II) RADEON(0): 1024x768@60Hz
[ 25.542] (II) RADEON(0): 1024x768@70Hz
[ 25.542] (II) RADEON(0): 1024x768@75Hz
[ 25.542] (II) RADEON(0): 1280x1024@75Hz
[ 25.542] (II) RADEON(0): 1152x864@75Hz
[ 25.542] (II) RADEON(0): Manufacturer's mask: 0
[ 25.542] (II) RADEON(0): Supported standard timings:
[ 25.542] (II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 25.542] (II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 25.542] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 25.542] (II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 25.542] (II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 25.542] (II) RADEON(0): #5: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 25.542] (II) RADEON(0): Supported detailed timing:
[ 25.542] (II) RADEON(0): clock: 97.8 MHz Image Size: 442 x 249 mm
[ 25.542] (II) RADEON(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1760 h_border: 0
[ 25.542] (II) RADEON(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 926 v_border: 0
[ 25.542] (II) RADEON(0): Supported detailed timing:
[ 25.542] (II) RADEON(0): clock: 85.5 MHz Image Size: 442 x 249 mm
[ 25.542] (II) RADEON(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
[ 25.542] (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
[ 25.542] (II) RADEON(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 155 MHz
[ 25.542] (II) RADEON(0): Monitor name: NS-20EM50A13
[ 25.542] (II) RADEON(0): EDID (in hex):
[ 25.542] (II) RADEON(0): 00ffffffffffff00085920bb01010101
[ 25.542] (II) RADEON(0): 00160103812c19782a3c25a554559f27
[ 25.542] (II) RADEON(0): 0d5054bfef808180714f8140950f9500
[ 25.542] (II) RADEON(0): 81c0010101012f2640a060841a303020
[ 25.542] (II) RADEON(0): 3500baf91000001a662150b051001b30
[ 25.542] (II) RADEON(0): 40703600baf91000001e000000fd0037
[ 25.542] (II) RADEON(0): 4c1e520f000a202020202020000000fc
[ 25.542] (II) RADEON(0): 004e532d3230454d35304131330a00a6
[ 25.542] (II) RADEON(0): Printing probed modes for output HDMI-0
[ 25.542] (II) RADEON(0): Modeline "1600x900"x60.0 97.75 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.5 kHz eP)
[ 25.542] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 25.542] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 25.542] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 25.542] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 25.542] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 25.542] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 25.542] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 25.542] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 25.542] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 25.542] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 25.542] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 25.542] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 25.542] (II) RADEON(0): Output VGA-0 disconnected
[ 25.542] (II) RADEON(0): Output HDMI-0 connected
[ 25.542] (II) RADEON(0): Using exact sizes for initial modes
[ 25.542] (II) RADEON(0): Output HDMI-0 using initial mode 1600x900
[ 25.542] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 25.542] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fa3b000
[ 25.542] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 25.542] (==) RADEON(0): DPI set to (96, 96)
[ 25.542] (II) Loading sub module "fb"
[ 25.542] (II) LoadModule: "fb"
[ 25.542] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 25.769] (II) Module fb: vendor="X.Org Foundation"
[ 25.769] compiled for 1.17.1, module version = 1.0.0
[ 25.769] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.769] (II) Loading sub module "ramdac"
[ 25.769] (II) LoadModule: "ramdac"
[ 25.769] (II) Module "ramdac" already built-in
[ 25.769] (II) UnloadModule: "modesetting"
[ 25.769] (II) Unloading modesetting
[ 25.769] (II) UnloadModule: "fbdev"
[ 25.769] (II) Unloading fbdev
[ 25.769] (II) UnloadSubModule: "fbdevhw"
[ 25.769] (II) Unloading fbdevhw
[ 25.769] (II) UnloadModule: "vesa"
[ 25.769] (II) Unloading vesa
[ 25.769] (--) Depth 24 pixmap format is 32 bpp
[ 25.818] (II) RADEON(0): [DRI2] Setup complete
[ 25.818] (II) RADEON(0): [DRI2] DRI driver: r600
[ 25.818] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 25.818] (II) RADEON(0): Front buffer size: 5652K
[ 25.818] (II) RADEON(0): VRAM usage limit set to 225496K
[ 25.853] (==) RADEON(0): Backing store enabled
[ 25.853] (II) RADEON(0): Direct rendering enabled
[ 25.853] (II) EXA(0): Driver allocated offscreen pixmaps
[ 25.853] (II) EXA(0): Driver registered support for the following operations:
[ 25.853] (II) Solid
[ 25.853] (II) Copy
[ 25.853] (II) Composite (RENDER acceleration)
[ 25.853] (II) UploadToScreen
[ 25.853] (II) DownloadFromScreen
[ 25.853] (II) RADEON(0): Acceleration enabled
[ 25.853] (==) RADEON(0): DPMS enabled
[ 25.853] (==) RADEON(0): Silken mouse enabled
[ 25.920] (II) RADEON(0): Set up textured video
[ 25.920] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 25.920] (II) RADEON(0): [XvMC] Extension initialized.
[ 25.920] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 26.100] (WW) RADEON(0): Option "PasswordFile" is not used
[ 26.100] (--) RandR disabled
[ 32.355] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 32.355] (II) AIGLX: enabled GLX_ARB_create_context
[ 32.355] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 32.355] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 32.355] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 32.355] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 32.355] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 32.355] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 32.355] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 32.357] (II) AIGLX: Loaded and initialized r600
[ 32.357] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 32.358] (II) RADEON(0): Setting screen physical size to 423 x 238
[ 35.161] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 35.161] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 35.161] (**) Power Button: Applying InputClass "keyboard-layout"
[ 35.161] (II) LoadModule: "evdev"
[ 35.206] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 35.498] (II) Module evdev: vendor="X.Org Foundation"
[ 35.498] compiled for 1.16.2, module version = 2.9.1
[ 35.499] Module class: X.Org XInput Driver
[ 35.499] ABI class: X.Org XInput driver, version 21.0
[ 35.499] (II) Using input driver 'evdev' for 'Power Button'
[ 35.499] (**) Power Button: always reports core events
[ 35.499] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 35.499] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 35.499] (--) evdev: Power Button: Found keys
[ 35.499] (II) evdev: Power Button: Configuring as keyboard
[ 35.499] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
[ 35.499] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 35.499] (**) Option "xkb_rules" "evdev"
[ 35.499] (**) Option "xkb_model" "pc104"
[ 35.499] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 35.975] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 35.975] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 35.975] (**) Power Button: Applying InputClass "keyboard-layout"
[ 35.975] (II) Using input driver 'evdev' for 'Power Button'
[ 35.975] (**) Power Button: always reports core events
[ 35.975] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 35.975] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 35.975] (--) evdev: Power Button: Found keys
[ 35.975] (II) evdev: Power Button: Configuring as keyboard
[ 35.975] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event0"
[ 35.975] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 35.975] (**) Option "xkb_rules" "evdev"
[ 35.975] (**) Option "xkb_model" "pc104"
[ 35.976] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 35.977] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/event9)
[ 35.977] (**) Logitech Unifying Device. Wireless PID:1028: Applying InputClass "evdev pointer catchall"
[ 35.977] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1028'
[ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: always reports core events
[ 35.978] (**) evdev: Logitech Unifying Device. Wireless PID:1028: Device: "/dev/input/event9"
[ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Vendor 0x46d Product 0xc52b
[ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found 20 mouse buttons
[ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found scroll wheel(s)
[ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found relative axes
[ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found x and y relative axes
[ 35.978] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Configuring as mouse
[ 35.978] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Adding scrollwheel support
[ 35.978] (**) evdev: Logitech Unifying Device. Wireless PID:1028: YAxisMapping: buttons 4 and 5
[ 35.978] (**) evdev: Logitech Unifying Device. Wireless PID:1028: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 35.978] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0006/input/input12/event9"
[ 35.978] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1028" (type: MOUSE, id 8)
[ 35.978] (II) evdev: Logitech Unifying Device. Wireless PID:1028: initialized for relative axes.
[ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: (accel) keeping acceleration scheme 1
[ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration profile 0
[ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration factor: 2.000
[ 35.979] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration threshold: 4
[ 35.979] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/mouse1)
[ 35.979] (II) No input driver specified, ignoring this device.
[ 35.979] (II) This device may have been added with another device file.
[ 35.980] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event7)
[ 35.980] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 35.980] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
[ 35.980] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
[ 35.980] (**) Generic USB Keyboard: always reports core events
[ 35.980] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event7"
[ 35.980] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
[ 35.980] (--) evdev: Generic USB Keyboard: Found keys
[ 35.980] (II) evdev: Generic USB Keyboard: Configuring as keyboard
[ 35.980] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:040B:2000.0004/input/input10/event7"
[ 35.980] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 9)
[ 35.980] (**) Option "xkb_rules" "evdev"
[ 35.980] (**) Option "xkb_model" "pc104"
[ 35.980] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 35.981] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event8)
[ 35.981] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 35.981] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
[ 35.981] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
[ 35.981] (**) Generic USB Keyboard: always reports core events
[ 35.981] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event8"
[ 35.981] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
[ 35.981] (--) evdev: Generic USB Keyboard: Found scroll wheel(s)
[ 35.981] (II) evdev: Generic USB Keyboard: Forcing buttons for scroll wheel(s)
[ 35.981] (--) evdev: Generic USB Keyboard: Found relative axes
[ 35.981] (--) evdev: Generic USB Keyboard: Found x and y relative axes
[ 35.981] (--) evdev: Generic USB Keyboard: Found keys
[ 35.981] (II) evdev: Generic USB Keyboard: Configuring as mouse
[ 35.981] (II) evdev: Generic USB Keyboard: Configuring as keyboard
[ 35.981] (II) evdev: Generic USB Keyboard: Adding scrollwheel support
[ 35.981] (**) evdev: Generic USB Keyboard: YAxisMapping: buttons 4 and 5
[ 35.981] (**) evdev: Generic USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 35.981] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:040B:2000.0005/input/input11/event8"
[ 35.981] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 10)
[ 35.981] (**) Option "xkb_rules" "evdev"
[ 35.981] (**) Option "xkb_model" "pc104"
[ 35.981] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 35.981] (II) evdev: Generic USB Keyboard: initialized for relative axes.
[ 35.981] (**) Generic USB Keyboard: (accel) keeping acceleration scheme 1
[ 35.982] (**) Generic USB Keyboard: (accel) acceleration profile 0
[ 35.982] (**) Generic USB Keyboard: (accel) acceleration factor: 2.000
[ 35.982] (**) Generic USB Keyboard: (accel) acceleration threshold: 4
[ 35.982] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/mouse0)
[ 35.982] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
[ 35.982] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
[ 35.982] (**) Generic USB Keyboard: always reports core events
[ 35.982] (**) evdev: Generic USB Keyboard: Device: "/dev/input/mouse0"
[ 35.982] (EE) evdev: Generic USB Keyboard: Unable to query fd: Inappropriate ioctl for device
[ 36.060] (EE) PreInit returned 2 for "Generic USB Keyboard"
[ 36.060] (II) UnloadModule: "evdev"
[ 36.060] (II) config/udev: Adding input device HP Webcam HD-2200 (/dev/input/event10)
[ 36.060] (**) HP Webcam HD-2200: Applying InputClass "evdev keyboard catchall"
[ 36.060] (**) HP Webcam HD-2200: Applying InputClass "keyboard-layout"
[ 36.060] (II) Using input driver 'evdev' for 'HP Webcam HD-2200'
[ 36.060] (**) HP Webcam HD-2200: always reports core events
[ 36.061] (**) evdev: HP Webcam HD-2200: Device: "/dev/input/event10"
[ 36.061] (--) evdev: HP Webcam HD-2200: Vendor 0x3f0 Product 0xa707
[ 36.061] (--) evdev: HP Webcam HD-2200: Found keys
[ 36.061] (II) evdev: HP Webcam HD-2200: Configuring as keyboard
[ 36.061] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input13/event10"
[ 36.061] (II) XINPUT: Adding extended input device "HP Webcam HD-2200" (type: KEYBOARD, id 11)
[ 36.061] (**) Option "xkb_rules" "evdev"
[ 36.061] (**) Option "xkb_model" "pc104"
[ 36.061] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 36.062] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event6)
[ 36.062] (II) No input driver specified, ignoring this device.
[ 36.062] (II) This device may have been added with another device file.
[ 36.063] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event5)
[ 36.063] (II) No input driver specified, ignoring this device.
[ 36.063] (II) This device may have been added with another device file.
[ 36.063] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event4)
[ 36.063] (II) No input driver specified, ignoring this device.
[ 36.063] (II) This device may have been added with another device file.
[ 36.064] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event3)
[ 36.064] (II) No input driver specified, ignoring this device.
[ 36.064] (II) This device may have been added with another device file.
[ 36.064] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event2)
[ 36.064] (II) No input driver specified, ignoring this device.
[ 36.064] (II) This device may have been added with another device file.
[ 53.210] (II) RADEON(0): EDID vendor "BBY", prod id 47904
[ 53.210] (II) RADEON(0): Using EDID range info for horizontal sync
[ 53.210] (II) RADEON(0): Using EDID range info for vertical refresh
[ 53.210] (II) RADEON(0): Printing DDC gathered Modelines:
[ 53.210] (II) RADEON(0): Modeline "1600x900"x0.0 97.75 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.5 kHz eP)
[ 53.210] (II) RADEON(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 53.210] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 53.210] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 62.870] (II) AIGLX: Suspending AIGLX clients for VT switch
Last edited by mavo (2015-03-17 13:08:53)alphaniner wrote:The preferred way to test a 'default session' is with a clean non-root user. Logging in as root can hide other issues.
Ok i get that. Here is xorg log and journalctl -b log. I rebooted tried to login through lxdm and got the cursor and blank screen. I then tty3 and startx and launched into openbox to post these results. Still cannot get into xfce as normal user. Thoughts???
~.local/share/xorg/Xorg.1.log
[ 84.848]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 84.848] X Protocol Version 11, Revision 0
[ 84.848] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 84.848] Current Operating System: Linux arch-server 3.14.35-1-lts #1 SMP Sat Mar 7 19:24:12 CET 2015 x86_64
[ 84.848] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=d6352b14-5ca7-476a-9f43-2bc25278effd rw quiet
[ 84.848] Build Date: 14 March 2015 06:45:50PM
[ 84.849]
[ 84.849] Current version of pixman: 0.32.6
[ 84.849] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 84.849] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 84.850] (==) Log file: "/home/molmedo1/.local/share/xorg/Xorg.1.log", Time: Wed Mar 18 10:06:18 2015
[ 84.850] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 84.850] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 84.851] (==) No Layout section. Using the first Screen section.
[ 84.851] (**) |-->Screen "Default Screen" (0)
[ 84.851] (**) | |-->Monitor "<default monitor>"
[ 84.851] (==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
[ 84.851] (==) Automatically adding devices
[ 84.851] (==) Automatically enabling devices
[ 84.851] (==) Automatically adding GPU devices
[ 84.851] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 84.851] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 84.851] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 84.851] (II) Loader magic: 0x815d80
[ 84.851] (II) Module ABI versions:
[ 84.851] X.Org ANSI C Emulation: 0.4
[ 84.851] X.Org Video Driver: 19.0
[ 84.851] X.Org XInput driver : 21.0
[ 84.851] X.Org Server Extension : 9.0
[ 84.856] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[ 84.856] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 84.857] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 84.859] (--) PCI:*(0:1:5:0) 1002:9616:1462:7641 rev 0, Mem @ 0xd0000000/268435456, 0xfebe0000/65536, 0xfea00000/1048576, I/O @ 0x0000d000/256
[ 84.859] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 84.859] (II) "glx" will be loaded by default.
[ 84.859] (II) LoadModule: "vnc"
[ 84.860] (II) Loading /usr/lib/xorg/modules/extensions/libvnc.so
[ 84.868] (II) Module vnc: vendor="Constantin Kaplinsky"
[ 84.868] compiled for 1.17.1, module version = 1.0.0
[ 84.868] Module class: X.Org Server Extension
[ 84.868] ABI class: X.Org Server Extension, version 9.0
[ 84.868] (II) LoadModule: "glx"
[ 84.868] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 84.870] (II) Module glx: vendor="X.Org Foundation"
[ 84.870] compiled for 1.17.1, module version = 1.0.0
[ 84.870] ABI class: X.Org Server Extension, version 9.0
[ 84.870] (==) AIGLX enabled
[ 84.870] (==) Matched ati as autoconfigured driver 0
[ 84.870] (==) Matched ati as autoconfigured driver 1
[ 84.870] (==) Matched modesetting as autoconfigured driver 2
[ 84.870] (==) Matched fbdev as autoconfigured driver 3
[ 84.870] (==) Matched vesa as autoconfigured driver 4
[ 84.870] (==) Assigned the driver to the xf86ConfigLayout
[ 84.870] (II) LoadModule: "ati"
[ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 84.871] (II) Module ati: vendor="X.Org Foundation"
[ 84.871] compiled for 1.17.0, module version = 7.5.0
[ 84.871] Module class: X.Org Video Driver
[ 84.871] ABI class: X.Org Video Driver, version 19.0
[ 84.871] (II) LoadModule: "radeon"
[ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 84.871] (II) Module radeon: vendor="X.Org Foundation"
[ 84.871] compiled for 1.17.0, module version = 7.5.0
[ 84.871] Module class: X.Org Video Driver
[ 84.871] ABI class: X.Org Video Driver, version 19.0
[ 84.871] (II) LoadModule: "modesetting"
[ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 84.871] (II) Module modesetting: vendor="X.Org Foundation"
[ 84.871] compiled for 1.17.1, module version = 1.17.1
[ 84.871] Module class: X.Org Video Driver
[ 84.871] ABI class: X.Org Video Driver, version 19.0
[ 84.871] (II) LoadModule: "fbdev"
[ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 84.871] (II) Module fbdev: vendor="X.Org Foundation"
[ 84.871] compiled for 1.17.0, module version = 0.4.4
[ 84.871] Module class: X.Org Video Driver
[ 84.871] ABI class: X.Org Video Driver, version 19.0
[ 84.871] (II) LoadModule: "vesa"
[ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 84.871] (II) Module vesa: vendor="X.Org Foundation"
[ 84.871] compiled for 1.17.0, module version = 2.3.2
[ 84.871] Module class: X.Org Video Driver
[ 84.871] ABI class: X.Org Video Driver, version 19.0
[ 84.871] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
[ 84.876] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 84.876] (II) FBDEV: driver for framebuffer: fbdev
[ 84.876] (II) VESA: driver for VESA chipsets: vesa
[ 84.876] (++) using VT number 3
[ 84.876] (--) controlling tty is VT number 3, auto-enabling KeepTty
[ 84.876] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 84.876] (II) [KMS] Kernel modesetting enabled.
[ 84.876] (WW) Falling back to old probe method for modesetting
[ 84.876] (WW) Falling back to old probe method for fbdev
[ 84.876] (II) Loading sub module "fbdevhw"
[ 84.876] (II) LoadModule: "fbdevhw"
[ 84.876] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 84.876] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 84.876] compiled for 1.17.1, module version = 0.0.2
[ 84.876] ABI class: X.Org Video Driver, version 19.0
[ 84.876] (WW) Falling back to old probe method for vesa
[ 84.876] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 84.876] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
[ 84.876] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 84.876] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 84.876] (==) RADEON(0): Default visual is TrueColor
[ 84.876] (==) RADEON(0): RGB weight 888
[ 84.876] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 84.876] (--) RADEON(0): Chipset: "ATI Radeon 3000 Graphics" (ChipID = 0x9616)
[ 84.876] (II) Loading sub module "dri2"
[ 84.876] (II) LoadModule: "dri2"
[ 84.876] (II) Module "dri2" already built-in
[ 84.876] (II) Loading sub module "exa"
[ 84.876] (II) LoadModule: "exa"
[ 84.877] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 84.877] (II) Module exa: vendor="X.Org Foundation"
[ 84.877] compiled for 1.17.1, module version = 2.6.0
[ 84.877] ABI class: X.Org Video Driver, version 19.0
[ 84.877] (II) RADEON(0): KMS Color Tiling: enabled
[ 84.877] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 84.877] (II) RADEON(0): KMS Pageflipping: enabled
[ 84.877] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 84.920] (II) RADEON(0): Output VGA-0 has no monitor section
[ 84.951] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 84.990] (II) RADEON(0): EDID for output VGA-0
[ 85.021] (II) RADEON(0): EDID for output HDMI-0
[ 85.021] (II) RADEON(0): Manufacturer: BBY Model: bb20 Serial#: 16843009
[ 85.021] (II) RADEON(0): Year: 2012 Week: 0
[ 85.021] (II) RADEON(0): EDID Version: 1.3
[ 85.021] (II) RADEON(0): Digital Display Input
[ 85.021] (II) RADEON(0): DFP 1.x compatible TMDS
[ 85.021] (II) RADEON(0): Max Image Size [cm]: horiz.: 44 vert.: 25
[ 85.021] (II) RADEON(0): Gamma: 2.20
[ 85.021] (II) RADEON(0): DPMS capabilities: Off
[ 85.021] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 85.021] (II) RADEON(0): First detailed timing is preferred mode
[ 85.021] (II) RADEON(0): redX: 0.645 redY: 0.331 greenX: 0.335 greenY: 0.621
[ 85.021] (II) RADEON(0): blueX: 0.152 blueY: 0.053 whiteX: 0.313 whiteY: 0.329
[ 85.021] (II) RADEON(0): Supported established timings:
[ 85.021] (II) RADEON(0): 720x400@70Hz
[ 85.021] (II) RADEON(0): 640x480@60Hz
[ 85.021] (II) RADEON(0): 640x480@67Hz
[ 85.021] (II) RADEON(0): 640x480@72Hz
[ 85.021] (II) RADEON(0): 640x480@75Hz
[ 85.021] (II) RADEON(0): 800x600@56Hz
[ 85.021] (II) RADEON(0): 800x600@60Hz
[ 85.021] (II) RADEON(0): 800x600@72Hz
[ 85.021] (II) RADEON(0): 800x600@75Hz
[ 85.021] (II) RADEON(0): 832x624@75Hz
[ 85.021] (II) RADEON(0): 1024x768@60Hz
[ 85.021] (II) RADEON(0): 1024x768@70Hz
[ 85.021] (II) RADEON(0): 1024x768@75Hz
[ 85.021] (II) RADEON(0): 1280x1024@75Hz
[ 85.021] (II) RADEON(0): 1152x864@75Hz
[ 85.021] (II) RADEON(0): Manufacturer's mask: 0
[ 85.021] (II) RADEON(0): Supported standard timings:
[ 85.021] (II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 85.021] (II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 85.021] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 85.021] (II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 85.021] (II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 85.021] (II) RADEON(0): #5: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 85.021] (II) RADEON(0): Supported detailed timing:
[ 85.021] (II) RADEON(0): clock: 97.8 MHz Image Size: 442 x 249 mm
[ 85.021] (II) RADEON(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1760 h_border: 0
[ 85.021] (II) RADEON(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 926 v_border: 0
[ 85.021] (II) RADEON(0): Supported detailed timing:
[ 85.021] (II) RADEON(0): clock: 85.5 MHz Image Size: 442 x 249 mm
[ 85.021] (II) RADEON(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
[ 85.021] (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
[ 85.021] (II) RADEON(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 155 MHz
[ 85.021] (II) RADEON(0): Monitor name: NS-20EM50A13
[ 85.021] (II) RADEON(0): EDID (in hex):
[ 85.021] (II) RADEON(0): 00ffffffffffff00085920bb01010101
[ 85.021] (II) RADEON(0): 00160103812c19782a3c25a554559f27
[ 85.021] (II) RADEON(0): 0d5054bfef808180714f8140950f9500
[ 85.021] (II) RADEON(0): 81c0010101012f2640a060841a303020
[ 85.021] (II) RADEON(0): 3500baf91000001a662150b051001b30
[ 85.021] (II) RADEON(0): 40703600baf91000001e000000fd0037
[ 85.022] (II) RADEON(0): 4c1e520f000a202020202020000000fc
[ 85.022] (II) RADEON(0): 004e532d3230454d35304131330a00a6
[ 85.022] (II) RADEON(0): Printing probed modes for output HDMI-0
[ 85.022] (II) RADEON(0): Modeline "1600x900"x60.0 97.75 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.5 kHz eP)
[ 85.022] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 85.022] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 85.022] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 85.022] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 85.022] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 85.022] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 85.022] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 85.022] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 85.022] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 85.022] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 85.022] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 85.022] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 85.022] (II) RADEON(0): Output VGA-0 disconnected
[ 85.022] (II) RADEON(0): Output HDMI-0 connected
[ 85.022] (II) RADEON(0): Using exact sizes for initial modes
[ 85.022] (II) RADEON(0): Output HDMI-0 using initial mode 1600x900
[ 85.022] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 85.022] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fa3b000
[ 85.022] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 85.022] (==) RADEON(0): DPI set to (96, 96)
[ 85.022] (II) Loading sub module "fb"
[ 85.022] (II) LoadModule: "fb"
[ 85.022] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 85.022] (II) Module fb: vendor="X.Org Foundation"
[ 85.022] compiled for 1.17.1, module version = 1.0.0
[ 85.022] ABI class: X.Org ANSI C Emulation, version 0.4
[ 85.022] (II) Loading sub module "ramdac"
[ 85.022] (II) LoadModule: "ramdac"
[ 85.022] (II) Module "ramdac" already built-in
[ 85.022] (II) UnloadModule: "modesetting"
[ 85.022] (II) Unloading modesetting
[ 85.022] (II) UnloadModule: "fbdev"
[ 85.022] (II) Unloading fbdev
[ 85.022] (II) UnloadSubModule: "fbdevhw"
[ 85.022] (II) Unloading fbdevhw
[ 85.022] (II) UnloadModule: "vesa"
[ 85.022] (II) Unloading vesa
[ 85.022] (--) Depth 24 pixmap format is 32 bpp
[ 85.023] (II) RADEON(0): [DRI2] Setup complete
[ 85.023] (II) RADEON(0): [DRI2] DRI driver: r600
[ 85.023] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 85.023] (II) RADEON(0): Front buffer size: 5652K
[ 85.023] (II) RADEON(0): VRAM usage limit set to 225496K
[ 85.023] (==) RADEON(0): Backing store enabled
[ 85.023] (II) RADEON(0): Direct rendering enabled
[ 85.023] (II) EXA(0): Driver allocated offscreen pixmaps
[ 85.023] (II) EXA(0): Driver registered support for the following operations:
[ 85.023] (II) Solid
[ 85.023] (II) Copy
[ 85.023] (II) Composite (RENDER acceleration)
[ 85.023] (II) UploadToScreen
[ 85.023] (II) DownloadFromScreen
[ 85.023] (II) RADEON(0): Acceleration enabled
[ 85.023] (==) RADEON(0): DPMS enabled
[ 85.023] (==) RADEON(0): Silken mouse enabled
[ 85.023] (II) RADEON(0): Set up textured video
[ 85.023] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 85.023] (II) RADEON(0): [XvMC] Extension initialized.
[ 85.023] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 85.023] (WW) RADEON(0): Option "PasswordFile" is not used
[ 85.023] (--) RandR disabled
[ 85.047] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 85.047] (II) AIGLX: enabled GLX_ARB_create_context
[ 85.047] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 85.047] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 85.047] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 85.047] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 85.047] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 85.047] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 85.047] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 85.048] (II) AIGLX: Loaded and initialized r600
[ 85.048] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 85.048] (II) RADEON(0): Setting screen physical size to 423 x 238
[ 85.088] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 85.088] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 85.088] (**) Power Button: Applying InputClass "keyboard-layout"
[ 85.088] (II) LoadModule: "evdev"
[ 85.088] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 85.089] (II) Module evdev: vendor="X.Org Foundation"
[ 85.089] compiled for 1.16.2, module version = 2.9.1
[ 85.089] Module class: X.Org XInput Driver
[ 85.089] ABI class: X.Org XInput driver, version 21.0
[ 85.089] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 13 paused 0
[ 85.090] (II) Using input driver 'evdev' for 'Power Button'
[ 85.090] (**) Power Button: always reports core events
[ 85.090] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 85.090] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 85.090] (--) evdev: Power Button: Found keys
[ 85.090] (II) evdev: Power Button: Configuring as keyboard
[ 85.090] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
[ 85.090] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 85.090] (**) Option "xkb_rules" "evdev"
[ 85.090] (**) Option "xkb_model" "pc104"
[ 85.090] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 85.123] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 85.123] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 85.123] (**) Power Button: Applying InputClass "keyboard-layout"
[ 85.124] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 14 paused 0
[ 85.124] (II) Using input driver 'evdev' for 'Power Button'
[ 85.124] (**) Power Button: always reports core events
[ 85.124] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 85.124] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 85.124] (--) evdev: Power Button: Found keys
[ 85.124] (II) evdev: Power Button: Configuring as keyboard
[ 85.124] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event0"
[ 85.124] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 85.124] (**) Option "xkb_rules" "evdev"
[ 85.124] (**) Option "xkb_model" "pc104"
[ 85.124] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 85.125] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/event9)
[ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: Applying InputClass "evdev pointer catchall"
[ 85.125] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 15 paused 0
[ 85.125] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1028'
[ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: always reports core events
[ 85.125] (**) evdev: Logitech Unifying Device. Wireless PID:1028: Device: "/dev/input/event9"
[ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Vendor 0x46d Product 0xc52b
[ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found 20 mouse buttons
[ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found scroll wheel(s)
[ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found relative axes
[ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found x and y relative axes
[ 85.125] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Configuring as mouse
[ 85.125] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Adding scrollwheel support
[ 85.125] (**) evdev: Logitech Unifying Device. Wireless PID:1028: YAxisMapping: buttons 4 and 5
[ 85.125] (**) evdev: Logitech Unifying Device. Wireless PID:1028: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 85.125] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0006/input/input12/event9"
[ 85.125] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1028" (type: MOUSE, id 8)
[ 85.125] (II) evdev: Logitech Unifying Device. Wireless PID:1028: initialized for relative axes.
[ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) keeping acceleration scheme 1
[ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration profile 0
[ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration factor: 2.000
[ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration threshold: 4
[ 85.126] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/mouse1)
[ 85.126] (II) No input driver specified, ignoring this device.
[ 85.126] (II) This device may have been added with another device file.
[ 85.126] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event7)
[ 85.126] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 85.126] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
[ 85.126] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 16 paused 0
[ 85.126] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
[ 85.126] (**) Generic USB Keyboard: always reports core events
[ 85.126] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event7"
[ 85.126] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
[ 85.126] (--) evdev: Generic USB Keyboard: Found keys
[ 85.126] (II) evdev: Generic USB Keyboard: Configuring as keyboard
[ 85.126] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.0/0003:040B:2000.0004/input/input10/event7"
[ 85.126] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 9)
[ 85.126] (**) Option "xkb_rules" "evdev"
[ 85.126] (**) Option "xkb_model" "pc104"
[ 85.126] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 85.127] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event8)
[ 85.127] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 85.127] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
[ 85.127] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 17 paused 0
[ 85.127] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
[ 85.127] (**) Generic USB Keyboard: always reports core events
[ 85.127] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event8"
[ 85.127] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
[ 85.127] (--) evdev: Generic USB Keyboard: Found scroll wheel(s)
[ 85.127] (II) evdev: Generic USB Keyboard: Forcing buttons for scroll wheel(s)
[ 85.127] (--) evdev: Generic USB Keyboard: Found relative axes
[ 85.127] (--) evdev: Generic USB Keyboard: Found x and y relative axes
[ 85.127] (--) evdev: Generic USB Keyboard: Found keys
[ 85.127] (II) evdev: Generic USB Keyboard: Configuring as mouse
[ 85.127] (II) evdev: Generic USB Keyboard: Configuring as keyboard
[ 85.127] (II) evdev: Generic USB Keyboard: Adding scrollwheel support
[ 85.127] (**) evdev: Generic USB Keyboard: YAxisMapping: buttons 4 and 5
[ 85.127] (**) evdev: Generic USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 85.127] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:040B:2000.0005/input/input11/event8"
[ 85.127] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 10)
[ 85.127] (**) Option "xkb_rules" "evdev"
[ 85.127] (**) Option "xkb_model" "pc104"
[ 85.127] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 85.128] (II) evdev: Generic USB Keyboard: initialized for relative axes.
[ 85.128] (**) Generic USB Keyboard: (accel) keeping acceleration scheme 1
[ 85.128] (**) Generic USB Keyboard: (accel) acceleration profile 0
[ 85.128] (**) Generic USB Keyboard: (accel) acceleration factor: 2.000
[ 85.128] (**) Generic USB Keyboard: (accel) acceleration threshold: 4
[ 85.128] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/mouse0)
[ 85.128] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
[ 85.128] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
[ 85.128] (**) Generic USB Keyboard: always reports core events
[ 85.128] (**) evdev: Generic USB Keyboard: Device: "/dev/input/mouse0"
[ 85.128] (EE) evdev: Generic USB Keyboard: Unable to query fd: Inappropriate ioctl for device
[ 85.220] (EE) PreInit returned 2 for "Generic USB Keyboard"
[ 85.220] (II) UnloadModule: "evdev"
[ 85.220] (II) config/udev: Adding input device HP Webcam HD-2200 (/dev/input/event10)
[ 85.220] (**) HP Webcam HD-2200: Applying InputClass "evdev keyboard catchall"
[ 85.220] (**) HP Webcam HD-2200: Applying InputClass "keyboard-layout"
[ 85.221] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 18 paused 0
[ 85.221] (II) Using input driver 'evdev' for 'HP Webcam HD-2200'
[ 85.221] (**) HP Webcam HD-2200: always reports core events
[ 85.221] (**) evdev: HP Webcam HD-2200: Device: "/dev/input/event10"
[ 85.221] (--) evdev: HP Webcam HD-2200: Vendor 0x3f0 Product 0xa707
[ 85.221] (--) evdev: HP Webcam HD-2200: Found keys
[ 85.221] (II) evdev: HP Webcam HD-2200: Configuring as keyboard
[ 85.221] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb6/6-5/6-5:1.0/input/input13/event10"
[ 85.222] (II) XINPUT: Adding extended input device "HP Webcam HD-2200" (type: KEYBOARD, id 11)
[ 85.222] (**) Option "xkb_rules" "evdev"
[ 85.222] (**) Option "xkb_model" "pc104"
[ 85.222] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 85.223] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event6)
[ 85.223] (II) No input driver specified, ignoring this device.
[ 85.223] (II) This device may have been added with another device file.
[ 85.223] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event5)
[ 85.223] (II) No input driver specified, ignoring this device.
[ 85.223] (II) This device may have been added with another device file.
[ 85.224] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event4)
[ 85.224] (II) No input driver specified, ignoring this device.
[ 85.224] (II) This device may have been added with another device file.
[ 85.224] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event3)
[ 85.225] (II) No input driver specified, ignoring this device.
[ 85.225] (II) This device may have been added with another device file.
[ 85.225] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event2)
[ 85.225] (II) No input driver specified, ignoring this device.
[ 85.225] (II) This device may have been added with another device file.
journalctl -b
Mar 18 10:05:02 arch-server kernel: 00000-9FFFF write-back
Mar 18 10:05:02 arch-server kernel: A0000-EFFFF uncachable
Mar 18 10:05:02 arch-server kernel: F0000-FFFFF write-protect
Mar 18 10:05:02 arch-server kernel: MTRR variable ranges enabled:
Mar 18 10:05:02 arch-server kernel: 0 base 000000000000 mask FFFF80000000 write-back
Mar 18 10:05:02 arch-server kernel: 1 base 000080000000 mask FFFFC0000000 write-back
Mar 18 10:05:02 arch-server kernel: 2 base 0000C0000000 mask FFFFF0000000 write-back
Mar 18 10:05:02 arch-server kernel: 3 disabled
Mar 18 10:05:02 arch-server kernel: 4 disabled
Mar 18 10:05:02 arch-server kernel: 5 disabled
Mar 18 10:05:02 arch-server kernel: 6 disabled
Mar 18 10:05:02 arch-server kernel: 7 disabled
Mar 18 10:05:02 arch-server kernel: TOM2: 0000000430000000 aka 17152M
Mar 18 10:05:03 arch-server kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Mar 18 10:05:03 arch-server kernel: e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
Mar 18 10:05:03 arch-server kernel: e820: last_pfn = 0xcff90 max_arch_pfn = 0x400000000
Mar 18 10:05:03 arch-server kernel: found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Mar 18 10:05:03 arch-server kernel: Scanning 1 areas for low memory corruption
Mar 18 10:05:03 arch-server kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
Mar 18 10:05:03 arch-server kernel: Using GB pages for direct mapping
Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Mar 18 10:05:03 arch-server kernel: [mem 0x00000000-0x000fffff] page 4k
Mar 18 10:05:03 arch-server kernel: BRK [0x01b3e000, 0x01b3efff] PGTABLE
Mar 18 10:05:03 arch-server kernel: BRK [0x01b3f000, 0x01b3ffff] PGTABLE
Mar 18 10:05:03 arch-server kernel: BRK [0x01b40000, 0x01b40fff] PGTABLE
Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x41fe00000-0x41fffffff]
Mar 18 10:05:03 arch-server kernel: [mem 0x41fe00000-0x41fffffff] page 2M
Mar 18 10:05:03 arch-server kernel: BRK [0x01b41000, 0x01b41fff] PGTABLE
Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x41c000000-0x41fdfffff]
Mar 18 10:05:03 arch-server kernel: [mem 0x41c000000-0x41fdfffff] page 2M
Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x400000000-0x41bffffff]
Mar 18 10:05:03 arch-server kernel: [mem 0x400000000-0x41bffffff] page 2M
Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x00100000-0xcff8ffff]
Mar 18 10:05:03 arch-server kernel: [mem 0x00100000-0x001fffff] page 4k
Mar 18 10:05:03 arch-server kernel: [mem 0x00200000-0x3fffffff] page 2M
Mar 18 10:05:03 arch-server kernel: [mem 0x40000000-0xbfffffff] page 1G
Mar 18 10:05:03 arch-server kernel: [mem 0xc0000000-0xcfdfffff] page 2M
Mar 18 10:05:03 arch-server kernel: [mem 0xcfe00000-0xcff8ffff] page 4k
Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x100000000-0x3ffffffff]
Mar 18 10:05:03 arch-server kernel: [mem 0x100000000-0x3ffffffff] page 1G
Mar 18 10:05:03 arch-server kernel: RAMDISK: [mem 0x3784e000-0x37c1efff]
Mar 18 10:05:03 arch-server kernel: ACPI: RSDP 00000000000f8d00 000014 (v00 ACPIAM)
Mar 18 10:05:03 arch-server kernel: ACPI: RSDT 00000000cff90000 00003C (v01 7641MS A7641100 20130428 MSFT 00000097)
Mar 18 10:05:03 arch-server kernel: ACPI: FACP 00000000cff90200 000084 (v01 7641MS A7641100 20130428 MSFT 00000097)
Mar 18 10:05:03 arch-server kernel: ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131218/
Mar 18 10:05:03 arch-server kernel: ACPI: DSDT 00000000cff90660 009DF0 (v01 A7641 A7641100 00000100 INTL 20051117)
Mar 18 10:05:03 arch-server kernel: ACPI: FACS 00000000cff9e000 000040
Mar 18 10:05:03 arch-server kernel: ACPI: APIC 00000000cff90390 00010C (v01 7641MS A7641100 20130428 MSFT 00000097)
Mar 18 10:05:03 arch-server kernel: ACPI: MCFG 00000000cff904a0 00003C (v01 7641MS OEMMCFG 20130428 MSFT 00000097)
Mar 18 10:05:03 arch-server kernel: ACPI: OEMB 00000000cff9e040 000072 (v01 7641MS A7641100 20130428 MSFT 00000097)
Mar 18 10:05:03 arch-server kernel: ACPI: HPET 00000000cff9a660 000038 (v01 7641MS OEMHPET 20130428 MSFT 00000097)
Mar 18 10:05:03 arch-server kernel: ACPI: SSDT 00000000cff9a6a0 000D40 (v01 A M I POWERNOW 00000001 AMD 00000001)
Mar 18 10:05:03 arch-server kernel: ACPI: Local APIC address 0xfee00000
Mar 18 10:05:03 arch-server kernel: No NUMA configuration found
Mar 18 10:05:03 arch-server kernel: Faking a node at [mem 0x0000000000000000-0x000000041fffffff]
Mar 18 10:05:03 arch-server kernel: Initmem setup node 0 [mem 0x00000000-0x41fffffff]
Mar 18 10:05:03 arch-server kernel: NODE_DATA [mem 0x41fff9000-0x41fffdfff]
Mar 18 10:05:03 arch-server kernel: [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040fa00000-ffff88041f5fffff] on node 0
Mar 18 10:05:03 arch-server kernel: Zone ranges:
Mar 18 10:05:03 arch-server kernel: DMA [mem 0x00001000-0x00ffffff]
Mar 18 10:05:03 arch-server kernel: DMA32 [mem 0x01000000-0xffffffff]
Mar 18 10:05:03 arch-server kernel: Normal [mem 0x100000000-0x41fffffff]
Mar 18 10:05:03 arch-server kernel: Movable zone start for each node
Mar 18 10:05:03 arch-server kernel: Early memory node ranges
Mar 18 10:05:03 arch-server kernel: node 0: [mem 0x00001000-0x0009efff]
Mar 18 10:05:03 arch-server kernel: node 0: [mem 0x00100000-0xcff8ffff]
Mar 18 10:05:03 arch-server kernel: node 0: [mem 0x100000000-0x41fffffff]
Mar 18 10:05:03 arch-server kernel: On node 0 totalpages: 4128558
Mar 18 10:05:03 arch-server kernel: DMA zone: 64 pages used for memmap
Mar 18 10:05:03 arch-server kernel: DMA zone: 21 pages reserved
Mar 18 10:05:03 arch-server kernel: DMA zone: 3998 pages, LIFO batch:0
Mar 18 10:05:03 arch-server kernel: DMA32 zone: 13247 pages used for memmap
Mar 18 10:05:03 arch-server kernel: DMA32 zone: 847760 pages, LIFO batch:31
Mar 18 10:05:03 arch-server kernel: Normal zone: 51200 pages used for memmap
Mar 18 10:05:03 arch-server kernel: Normal zone: 3276800 pages, LIFO batch:31
Mar 18 10:05:03 arch-server kernel: ACPI: PM-Timer IO Port: 0x808
Mar 18 10:05:03 arch-server kernel: ACPI: Local APIC address 0xfee00000
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: IOAPIC (id[0x14] address[0xfec00000] gsi_base[0])
Mar 18 10:05:03 arch-server kernel: IOAPIC[0]: apic_id 20, version 33, address 0xfec00000, GSI 0-23
Mar 18 10:05:03 arch-server kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mar 18 10:05:03 arch-server kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Mar 18 10:05:03 arch-server kernel: ACPI: IRQ0 used by override.
Mar 18 10:05:03 arch-server kernel: ACPI: IRQ2 used by override.
Mar 18 10:05:03 arch-server kernel: ACPI: IRQ9 used by override.
Mar 18 10:05:03 arch-server kernel: Using ACPI (MADT) for SMP configuration information
Mar 18 10:05:03 arch-server kernel: ACPI: HPET id: 0x8300 base: 0xfed00000
Mar 18 10:05:03 arch-server kernel: smpboot: Allowing 24 CPUs, 20 hotplug CPUs
Mar 18 10:05:03 arch-server kernel: nr_irqs_gsi: 40
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xcff90000-0xcff9dfff]
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xcff9e000-0xcffdffff]
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xd0000000-0xffdfffff]
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
Mar 18 10:05:03 arch-server kernel: e820: [mem 0xd0000000-0xffdfffff] available for PCI devices
Mar 18 10:05:03 arch-server kernel: Booting paravirtualized kernel on bare hardware
Mar 18 10:05:03 arch-server kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:24 nr_node_ids:1
Mar 18 10:05:03 arch-server kernel: PERCPU: Embedded 27 pages/cpu @ffff88040f600000 s81664 r8192 d20736 u131072
Mar 18 10:05:03 arch-server kernel: pcpu-alloc: s81664 r8192 d20736 u131072 alloc=1*2097152
Mar 18 10:05:03 arch-server kernel: pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Mar 18 10:05:03 arch-server kernel: pcpu-alloc: [0] 16 17 18 19 20 21 22 23 -- -- -- -- -- -- -- --
Mar 18 10:05:03 arch-server kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4064026
Mar 18 10:05:03 arch-server kernel: Policy zone: Normal
Mar 18 10:05:03 arch-server kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=d6352b14-5ca7-476a-9f43-2bc25278effd rw quiet
Mar 18 10:05:03 arch-server kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
Mar 18 10:05:03 arch-server kernel: xsave: enabled xstate_bv 0x7, cntxt size 0x340
Mar 18 10:05:03 arch-server kernel: Checking aperture...
Mar 18 10:05:03 arch-server kernel: No AGP bridge found
Mar 18 10:05:03 arch-server kernel: Node 0: aperture @ 0 size 32 MB
Mar 18 10:05:03 arch-server kernel: Your BIOS doesn't leave a aperture memory hole
Mar 18 10:05:03 arch-server kernel: Please enable the IOMMU option in the BIOS setup
Mar 18 10:05:03 arch-server kernel: This costs you 64 MB of RAM
Mar 18 10:05:03 arch-server kernel: Mapping aperture over 65536 KB of RAM @ c4000000
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Mar 18 10:05:03 arch-server kernel: Memory: 16106196K/16514232K available (5183K kernel code, 859K rwdata, 1640K rodata, 1128K init, 1300K bss, 408036K reserv
Mar 18 10:05:03 arch-server kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=1
Mar 18 10:05:03 arch-server kernel: Hierarchical RCU implementation.
Mar 18 10:05:03 arch-server kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=24.
Mar 18 10:05:03 arch-server kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=24
Mar 18 10:05:03 arch-server kernel: NR_IRQS:8448 nr_irqs:872 16
Mar 18 10:05:03 arch-server kernel: spurious 8259A interrupt: IRQ7.
Mar 18 10:05:03 arch-server kernel: Console: colour dummy device 80x25
Mar 18 10:05:03 arch-server kernel: console [tty0] enabled
Mar 18 10:05:03 arch-server kernel: allocated 66060288 bytes of page_cgroup
Mar 18 10:05:03 arch-server kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Mar 18 10:05:03 arch-server kernel: hpet clockevent registered
Mar 18 10:05:03 arch-server kernel: tsc: Fast TSC calibration using PIT
Mar 18 10:05:03 arch-server kernel: tsc: Detected 4199.946 MHz processor
Mar 18 10:05:03 arch-server kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 8399.89 BogoMIPS (lpj=41999460)
Mar 18 10:05:03 arch-server kernel: pid_max: default: 32768 minimum: 301
Mar 18 10:05:03 arch-server kernel: ACPI: Core revision 20131218
Mar 18 10:05:03 arch-server kernel: ACPI: All ACPI Tables successfully acquired
Mar 18 10:05:03 arch-server kernel: Security Framework initialized
Mar 18 10:05:03 arch-server kernel: Yama: becoming mindful.
Mar 18 10:05:03 arch-server kernel: Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mar 18 10:05:03 arch-server kernel: Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mar 18 10:05:03 arch-server kernel: Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mar 18 10:05:03 arch-server kernel: Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys memory
Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys devices
Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys freezer
Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys net_cls
Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys blkio
Mar 18 10:05:03 arch-server kernel: tseg: 0000000000
Mar 18 10:05:03 arch-server kernel: CPU: Physical Processor ID: 0
Mar 18 10:05:03 arch-server kernel: CPU: Processor Core ID: 0
Mar 18 10:05:03 arch-server kernel: mce: CPU supports 7 MCE banks
Mar 18 10:05:03 arch-server kernel: LVT offset 1 assigned for vector 0xf9
Mar 18 10:05:03 arch-server kernel: Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
tlb_flushall_shift: 6
Mar 18 10:05:03 arch-server kernel: Freeing SMP alternatives memory: 20K (ffffffff819f2000 - ffffffff819f7000)
Mar 18 10:05:03 arch-server kernel: ftrace: allocating 20141 entries in 79 pages
Mar 18 10:05:03 arch-server kernel: Switched APIC routing to physical flat.
Mar 18 10:05:03 arch-server kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Mar 18 10:05:03 arch-server kernel: smpboot: CPU0: AMD FX(tm)-4170 Quad-Core Processor (fam: 15, model: 01, stepping: 02)
Mar 18 10:05:03 arch-server kernel: Performance Events: Fam15h core perfctr, AMD PMU driver.
Mar 18 10:05:03 arch-server kernel: ... version: 0
Mar 18 10:05:03 arch-server kernel: ... bit width: 48
Mar 18 10:05:03 arch-server kernel: ... generic registers: 6
Mar 18 10:05:03 arch-server kernel: ... value mask: 0000ffffffffffff
Mar 18 10:05:03 arch-server kernel: ... max period: 00007fffffffffff
Mar 18 10:05:03 arch-server kernel: ... fixed-purpose events: 0
Mar 18 10:05:03 arch-server kernel: ... event mask: 000000000000003f
Mar 18 10:05:03 arch-server kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Mar 18 10:05:03 arch-server kernel: x86: Booting SMP configuration:
Mar 18 10:05:03 arch-server kernel: .... node #0, CPUs: #1 #2 #3
Mar 18 10:05:03 arch-server kernel: x86: Booted up 1 node, 4 CPUs
Mar 18 10:05:03 arch-server kernel: smpboot: Total of 4 processors activated (33599.56 BogoMIPS)
Mar 18 10:05:03 arch-server kernel: devtmpfs: initialized
Mar 18 10:05:03 arch-server kernel: PM: Registering ACPI NVS region [mem 0xcff9e000-0xcffdffff] (270336 bytes)
Mar 18 10:05:03 arch-server kernel: pinctrl core: initialized pinctrl subsystem
Mar 18 10:05:03 arch-server kernel: RTC time: 15:04:53, date: 03/18/15
Mar 18 10:05:03 arch-server kernel: NET: Registered protocol family 16
Mar 18 10:05:03 arch-server kernel: cpuidle: using governor ladder
Mar 18 10:05:03 arch-server kernel: cpuidle: using governor menu
Mar 18 10:05:03 arch-server kernel: ACPI: bus type PCI registered
Mar 18 10:05:03 arch-server kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Mar 18 10:05:03 arch-server kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Mar 18 10:05:03 arch-server kernel: PCI: not using MMCONFIG
Mar 18 10:05:03 arch-server kernel: PCI: Using configuration type 1 for base access
Mar 18 10:05:03 arch-server kernel: PCI: Using configuration type 1 for extended access
Mar 18 10:05:03 arch-server kernel: mtrr: your CPUs had inconsistent variable MTRR settings
Mar 18 10:05:03 arch-server kernel: mtrr: probably your BIOS does not setup all CPUs.
Mar 18 10:05:03 arch-server kernel: mtrr: corrected configuration.
Mar 18 10:05:03 arch-server kernel: bio: create slab <bio-0> at 0
Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(Module Device)
Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(Processor Device)
Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(Processor Aggregator Device)
Mar 18 10:05:03 arch-server kernel: ACPI: Executed 4 blocks of module-level executable AML code
Mar 18 10:05:03 arch-server kernel: ACPI: Interpreter enabled
Mar 18 10:05:03 arch-server kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
Mar 18 10:05:03 arch-server kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-580)
Mar 18 10:05:03 arch-server kernel: ACPI: (supports S0 S1 S4 S5)
Mar 18 10:05:03 arch-server kernel: ACPI: Using IOAPIC for interrupt routing
Mar 18 10:05:03 arch-server kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Mar 18 10:05:03 arch-server kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
Mar 18 10:05:03 arch-server kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Mar 18 10:05:03 arch-server kernel: ACPI: No dock devices found.
Mar 18 10:05:03 arch-server kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Mar 18 10:05:03 arch-server kernel: acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
Mar 18 10:05:03 arch-server kernel: acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
Mar 18 10:05:03 arch-server kernel: PCI host bridge to bus 0000:00
Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
Mar 18 10:05:03 arch-server kernel: pci 0000:00:01.0: [1022:9602] type 01 class 0x060400
Mar 18 10:05:03 arch-server kernel: pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
Mar 18 10:05:03 arch-server kernel: pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
Mar 18 10:05:03 arch-server kernel: pci 0000:00:05.0: System wakeup disabled by ACPI
Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x24: [mem 0xfe9ffc00-0xfe9fffff]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: set SATA to AHCI mode
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.0: reg 0x10: [mem 0xfe9fe000-0xfe9fefff]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.0: System wakeup disabled by ACPI
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.1: reg 0x10: [mem 0xfe9fd000-0xfe9fdfff]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.1: System wakeup disabled by ACPI
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: reg 0x10: [mem 0xfe9ff800-0xfe9ff8ff]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: supports D1 D2
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: System wakeup disabled by ACPI
Mar 18 10:05:03 arch-server kernel: pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
Mar 18 10:05:03 arch-server kernel: pci 0000:00:13.0: reg 0x10: [mem 0xfe9fc000-0xfe9fcfff]
Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.0: System wakeup disabled by ACPI
Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.1: reg 0x10: [mem 0xfe9fb000-0xfe9fbfff]
Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.1: System wakeup disabled by ACP -
How to install Windows 7 on MacBook with Tiger + Leopard upgrade using Boot Camp
Hi,
I've had Vista installed on a separate partition on my MacBook for a while, but wanted to upgrade to Windows 7. I've completely wiped the HDD, re-installed Tiger, upgraded to Leopard and installed Windows 7 using boot camp from within OSX. However, I now can't boot back into OSX - I believe it's because I don't have the latest version of Boot Camp within Windows 7 (it doesn't appear on the task bar), but I also don't have a full copy of Leopard, only the upgrade disk.
Is there any way to (a) boot back into OSX (I've tried holding down the option key and this doesn't work) and (b) installing a version of Boot Camp that will enable me to switch between both operating systems as I was when Vista was installed & without having to purchase the full copy of Leopard?
Any assistance would be much appreciated.
Many thanks,
Elliot.Try to boot from the 10.4 disk then and "Repair Disk". If you can, then try booting from the 10.5 disk and do the same.
Have you tried holding down the C key also when trying to boot from the Install disks? It could take 30 seconds to a minute or more for the C key/Option key reboots. The Mac DVD HAS to be the OS installer disk not the applications installer, etc,. Sorry if I keep bringing this up.
You have to keep holding it down the whole time it boots, either it will bypass it and reboot into Windows or it should get to the boot loader window with at least Windows showing up.
If you can still boot into Windows with no problems then Windows SHOULD show up in the boot loader window. (C key/Option key) It's hardware related, it's the computers manual way of looking for a bootable OS if there's no OS installed yet.
Don't forget to disconnect any USB devices until you get it fixed.
Also try to boot from the Windows installer disk and "Repair Windows" and see what happens.
Other then your DVD drive may be on it's last legs, I can't really think of any reason you can't boot from the Mac DVD's. All the other post's I searched for eventually got the DVD boot working, even 10.6 and 10.7 are having that issue, tho rarely.
elliotfromnewark wrote:
Hi, ...........inserting the Leopard disk once in Windows to install boot camp and it says that the version on the DVD is only compatible with XP SP2 or Vista.................
Don't run the installer this time, if a window pops up to "Run" or "Open", just open it. If it doesn't open the DVD and look for the BootCamp.exe. Right click on the .exe (or whatever it's called) and select the trouble shoot compatibility mode and select Vista. Yes, I know you have W7. See if that works.
It may have buggered the Mac OS side so you may have to get DiskWarrior (worked for some) or the like in order to fix it. It would definitely be useful in the future. -
Installing Windows 7 "Upgrade" using Boot Camp 4?
I've run myself into a bit of a dilemma and I'm hoping there is a work around... I have a MacBook Pro that came with Lion and Boot Camp 4. I understand Boot Camp 4 does not support running anything earlier than Windows 7. After going through the whole process and installing the full version of 7 on Boot Camp I realized when I got to the part where Windows wanted a license key that my license is only for an "upgrade" and therefore said it wasn't valid. I have Windows Vista that I can upgrade from, but I apparently can't install Vista with Boot Camp 4, and I've read I cannot downgrade to BC3. I'm trying to avoid buying a new license key for a full version of 7. Does anyone know if there is a way to make this work? I hope I have explained it properly... pretty much a catch 22!
OK, here's what you do. I'm assuming that you've got the partition laid out and your drivers ready:
Insert your Win 7 Upgrade DVD and hold down the C key while restarting the Mac This boots Setup
Run through Setup once, formatting your Boot Camp volume. For this go-around, use a Custom install
You will get to a point where you are asked for your Product Key. Skip this request now!
Install the Boot Camp software
Next, go back to your Win 7 Upgrade DVD and allow the AutoRun. Click Install Now on the window that opens.
You're in Setup again. This time, do an Upgrade. You should be back at your Desktop when this runs through. If asked for the key again, skip it.
Click Start > Computer
Now click System properties
At the bottom of the System Properties window is a link, Change product key. Click this link.
Enter the Upgrade key now while you walk through activation. It should be accepted this time.
We've just tricked Windows into thinking it was upgraded, thereby fulfilling the license requirement. This method works because the installer makes no check as to what specific versions of Vista or 7 the upgrade will qualify on. In this way, it is possible to "clean install" an upgrade copy for about $100 less than a full copy.
Nate -
Windows Vista with Windows 7 Upgrade on Boot Camp 4.0.1. Is it possible??
Hello everyone,
I own a genuine full installation Windows Vista and a genuine upgrade to Windows 7. I'd like to install these ( i.e. install Vista and then upgrade to 7) on a MacBookPro running on OSX Lion 10.7.2 with Boot Camp 4.0.1. Is It possible???Try the Bootcamp forum: http://discussions.apple.com/category.jspa?categoryID=237
Maybe you are looking for
-
APP Error same problem last 4 days..
Hi gurus, Thanks for your time, i done all settings, i check all settings twice but When i run APP it showing some problem, iam sending log overview for your review. Due date determination additional log---- >>Document 400007 line item 001 visa MYR 3
-
Carrier update error when update to itunes 10.5.3 (error 1630)
Hi, today I tried to update itunes to version 10.5.3 but I recieved this erro: ( error 1630 ) what's wrong with my iphone 4 ( ios 5.0.1 ) ?! And my carrier is MTN Irancell. Any ideas?!
-
I got a macbook and put my songs on itunes. However i cant figure out how to edit the song info. Also when i copied the songs to cd from another computer to put on this one the are some songs that are now only a couple seconds of the song. Message wa
-
HOW TO CONNECT MG3100 TO ATT ROUTER
Have a MG3100 series printer. Had it connected on old system. Have not got it to connect to new ATT U system.
-
Hi, Not sure this is the right area, but it's related to display problem on my G5. Upon powering up (OS X never boots), I get nothing but a black screen and loud fan- I've tried an SMU reset...nothing has worked. Before it goes in for repair, I'd lik