Upgrading ORDS version from 2.0.9 to 2.0.10

Hello ORDS Community,
I am trying to upgrade the ORDS version from 2.0.9 to 2.0.10. The installation instructions tell me to unzip, copy the ords.war file and then configure the setup values. I did that (on Dev1 server), ords was upgraded to 2.0.10 and it works great.
Now I have to do this on about 10 other servers. Is there a way that I can copy the files for ORDS version 2.0.10 (from server Dev1, which I just upgraded in the step above) and push it to all the other servers (for e.g. Dev2)? I copied the files from <Tomcat directory>webapps/ords folder from Dev1 to Dev2. This did not help. The APEX frontend on Dev2 still shows the listener version as 2.0.9.
Can you tell me if there is a way to achieve this?
Thanks!!

Hi,
You don't need run whole configuration step if you upgrade.
You can just tell to new war file where is your old config files, move new war to Tomcat webapps folder overwriting old war and restart Tomcat.
Here is how you set configdir:
Lets say your ORDS config files are in /tmp/apex or /tmp/ords folder
Then run
java -jar ords.war configdir /tmp/
Regards,
Jari

Similar Messages

  • Upgrade snmp version from v1 to v3

    Hello
    Here is what i want to do,
    1. password encryption, change from Password-7 to Secret-5
    2. upgrade snmp version from v1 to v3
    Please help to comment on these requirements and let me know if they are possible.
    If yes, can you please provide the procedures to perform the above.
    Thanks
    Chetan

    Hi,
    Since the Discovery system is an appliance - bundled hardware + software + content, it is not possible to upgrade from v2 to v3.0.             
    You are free to upgrade your v2.0 system's SAP components by  downloading patches and service packs from the SAP Service MarketPlace and  applying them to the V2 system  if your main intention is to patch the V2 to a higher software release.                                                
    The only way to get the Discovery system V3 is to purchase it from one of the vendors and would include hardware , software and content.                                 
    Please check the SDN pages for how to order a new system:                      
    http://www.sdn.sap.com/irj/sdn/discoverysystem                                  
    Take a look at this [blog|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414700)ID0712810550DB00622245933431315245End?blog=/pub/wlg/7914] that includes a detailed list on the differences  between the Discovery system  V2 and  V3                                        
    thanks,                                                                         
    Deepa

  • Upgrade Bo versione from 6.1.a to 6.1.3

    Post Author: Carmen Renzone
    CA Forum: Authentication
    Hi All,   we have tried to install a new BO version but the process failed.  We have several problems :  1. Several folder and files did not get upgraded. The last modified date has not changed.  2. Of the required three services only one is present and  running.      Present : "WebIntelligence Cluster Service"      Not Present "WebIntelligence DTS Manager" and "OLAP Cache Manager"     What means?  3. The customer wants to reinstall the Patch but since has been already applied running      the  .exe the only avaialble options are "Repair, Modify,      Remove". We have tried with Repair option but nothing happen. We need to have the option to install again the patch.  Please help us as soon as possible.  Thanks for your collaboration

    There is not direct equvalent to the RDMBSRealm, you'll have to code one if
    you need.
    Try looking at these examples:
    http://dev2dev.bea.com/codelibrary/code/sec_rdbms.jsp
    http://dev2dev.bea.com/codelibrary/code/security_prov81.jsp
    Regards,
    Anton
    "Stefan Frank" <[email protected]> wrote in message
    news:40ed6192$1@mktnews1...
    Hi,
    we have an RDBMS-Security-Realm, that we upgraded from 6.1 to 8.1
    according to the
    docs(http://edocs.bea.com/wls/docs81/upgrade/upgrade6xto81.html#1066661)
    - the users and groups show up as expected in the console, the user is
    authenticated, but he is not authorized: We have a web-application, that
    we secured with the RDBMSRealm, but when we login, the user does not get
    authorized to have the roles needed for accessing the ressources.
    We debugged into the RDBMSDelegate and we can see the calls to getUser,
    but we do not see any calls to getGroup - is there something else we
    have to do, that is not inside the docs?! We have the
    RDBMSRealmAdapterAuthenticator in the chain of Authentication Providers,
    do we also need an Adapter*Authorizer*??
    I'm currently stuck, so any help is highly appreciated!
    cheers
    stefan
    PS: Just to be sure I tried everything: If i do not want to run 8.1 on
    CompatibilitySecurity - is there an Authtication-Adapter that fetches
    User/Groups and Roles from an RDBMS?! Apart from the Realm Adapter
    Authenticator used for the Upgrade I've only seen Authticators for LDAP,
    Novell, iPlanet and Active Directory - are there plain RDBMS
    Authenticators somewhere?!

  • Upgrade enterprise version from cf8 to cf10

    Dear All,
      I am still running 2 x cf8 enterprise /w clustering function on windows. And i am going to upgrade it to version 10.
      It seem no details document on the offical CF website about upgrade topic. Even in the product documents.
      So i want to ask :
      1.) Do i need change any code from 8 to 10?
      2.) From the changed between JRUN to TOMCAT, are there any clustering function differents?
      Thank you.
    Gordon

    Dear All,
      I am still running 2 x cf8 enterprise /w clustering function on windows. And i am going to upgrade it to version 10.
      It seem no details document on the offical CF website about upgrade topic. Even in the product documents.
      So i want to ask :
      1.) Do i need change any code from 8 to 10?
      2.) From the changed between JRUN to TOMCAT, are there any clustering function differents?
      Thank you.
    Gordon

  • Need help Upgrading (Upsell version) from CS1 Premium to CS4 Premium

    I just purchased the new IMac (late 2009 version) that comes with Leopard. I also purchased an Upsell of CS4 design premium to update my CS1 Premium. Has anyone done this before? Do I need to first install the original CS1 before upgrading to CS4? I have the serial number for CS1 just not sure if it will install to begin with, since it was created for G5 not the Intel version.
    Anyway, what's the difference between an Upsell and an Upgrade? It costs more, but I was told that's what I need. Do they really have different discs inside the box?

    Just have the serial number and disk for CS handy. You don't need to install it.
    What you have is not technically and upsell. An upsell is from a different product such as Photoshop to Creative Suite. There are two upgrade paths for the suite. From CS/CS2 and from CS3.
    Bob

  • Having trouble upgrading latest version of Firefox. Have attempted this several times and still getting message on main page that I do not have latest version. What do I need to do?

    I have attempted to upgrade latest version from main Firefox page, but still have the message on main page that I need to upgrade, that I have not upgraded to latest version. What are the exact steps I need to execute in order to have the latest upgrade? I've clicked on the "upgrade" icon and it has taken me through the steps, but still tells me I'm not upgraded. Very frustrating.

    Hey dogo1,
    The latest version of Firefox is 9.0.1, so it looks like your updates have failed. You can look at the Knowledge Base article [[Updating Firefox]] for some troubleshooting steps. Alternatively, you might just want to try installing a fresh copy of the latest version of Firefox. I would look at the Knowledge Base article [[Backing up your information]] first. That way you'll have a backup of all your bookmarks and person information.
    Then you should completely uninstall Firefox and then download a new copy from:
    http://www.mozilla.org/firefox/new/
    Hopefully this helps!

  • Duration of upgrading SBO version

    Dear Experts,
    I am currently considering to upgrade SBO version, from 2004A SP00 PL 41 using SQL server 2000  to 2005A SP01 PL23 using SQL server 2005. I have done cleaning of 2004A version from add/remove program and installing SBO 2005A. Then I restore the 2004A database to SQL server 2005A. I run the SBO GUI/client then the system asks to upgrade version. I click OK and upgrade was started. However it seems never finish because I start to upgrade on 13.46 pm but until now 15.19 pm still not end/finish. there is no error message appears. The database file total is about 5GB. How many hour is the duration of upgrading? was I wrong in the upgrading process ? I appreciate your answer. TIA
    Rgds,

    Hi Ad,
    Tks for your answer. I have succeeded to upgrade 1/2 hours after i post the message. I am confident now about his after you answered. I thought it will not success. However do you think my upgrading process is correct ?
    Rgds,

  • Will it be possible to upgrade the software from LR 4 to LR 6?

    I own  LR 3 (full) and LR 4 (upgrade). Will it be possible to upgrade the software from LR 4 to LR 6 directly?

    In the past,  the upgrade version of Lr upgraded all versions from v1 onwards, and I see no reason why this should not be true this time, but can make no promises, mainly because I have no connection to Adobe.
    So yes, you will probably be able to do as you want.

  • I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

    I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
    If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

    Hi David-
    The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
    http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

  • After upgrading to Yosemite I have lost iPhoto. It has a cross through it in Finder, but I clicked on it and I was directed to download the latest version from the App store, but it is not available in the Australian store. Can anyone help?

    After upgrading to Yosemite I have lost iPhoto. It has a cross through it in Finder, but I clicked on it and I was directed to download the latest version from the App store, but it is not available in the Australian store. Can anyone please help? I am not an advanced user and I would like my photos back, having had no idea I would lose iPhoto in the upgrade!

    Thanks petermac87...but for some reason, the only purchases showing are OS. So assuming iPhoto is in Mountain Lion, I was hoping to look under Hidden Items there as you suggested, but there is no option for that. Only option is to download Mountain Lion again, not iPhoto specifically. Any ideas welcome!

  • Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts..

    Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts...
    Rp

    1. in physical connections part can i use the same work schema
    2. Can i use same contexts created or do i need to create everything as new and then try?
    Thanks,
    Rp.
    Hi,
    As you mentioned that you just upgraded the database, so the data is same and schema is same you can connect with the same work schema.
    Yes, you can use the same contexts , but need to do Reverse Engineering for your new database.
    And about data server, i think you also have no need to create new data server, if hostname,sid and port etc are same as these were with R11(consult with your DBAs regarding it)

  • I would like to upgrade my OS from 10.6.8. I can't find any higher version on the site. Yosemite is the latest but not available. Can someone help please?

    I would like to upgrade my OS from 10.6.8. I can't find any higher version on the site. Yosemite is the latest but not available. Can someone help please?

    If Yosemite is not available to you, your system may not meet the minimum requirements.
    How to install OS X Yosemite on your Mac - Apple Support

  • I would like to upgrade my macbook from 10.6.8 to Mountain lion. however, the app store said that my macbook isn't compatible with the mountain lion . Why can't I update it to mountain lion? and How can I upgrade it to a newer version ?

    I would like to upgrade my macbook from 10.6.8 (Snow Leopard) to Mountain Lion. However, app store said that my macbook is not compatible with Mountain Lion? Why  can't I upgrade my macbook to mountain lion? And How can I upgrade my macbk to a newer version such that I can download the newest version of imovie?
    Here r the system info of my macbook:
    Mac oS X  (version 10.6.8)
    Processor :2.2 GHz Intel Core 2 Duo
    Memory: 2 GB 667 MHz DDR2 SDRAM
    Model Identifier:  Macbook 3,1
    I

    Requirements for Mountain Lion:
    http://www.apple.com/osx/specs/

  • Steps to upgrade my Oracle version from 11.1.0.6 to 11.2.0.1 in windows.

    Can anyone help me with the steps to upgrade my Oracle version from 11.1.0.6 to 11.2.0.1 in windows.
    Thanks in advance.

    If you are going to upgrade, you should upgrade to the latest 11gR2 patchset (currently 11.2.0.4). At a high level -
    1. Install 11.2.0.4 into a new separate ORACLE_HOME - see MOS Doc 1562139.1 and Contents
    2. Apply the latest 11.2.0.4 PSU bundle available for Windows - see MOS Doc 1454618.1
    3. Use DBUA to perform the upgrade - MOS Doc 870814.1 and Contents
    Also see
    MOS Doc 1645862.1

  • HT1444 how can I upgrade my macbook from 10.5.8 version to the latest version

    how can I upgrade my macbook from OS X 10.5.8 version to the latest version?

    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    Whilst Apple have withdrawn Snow Leopard from their stores, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $20 for a single user, or $30 for a family pack that covers up to 5 Macs.  You can also purchase the code to use to download Lion from the same number (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
    http://www.apple.com/osx/specs/
    If you are outside the US call your national Apple Helpline:
    http://support.apple.com/kb/HE57
    If you're in the UK, use this number: 0871 508 4400
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
    To use iCloud you have to upgrade all the way to Mountain Lion:
    http://support.apple.com/kb/HT4759

Maybe you are looking for